Evidence Based Medicine on FHIR Implementation Guide
1.0.0-ballot2 - STU 1 ballot International flag

This page is part of the Evidence Based Medicine on FHIR Implementation Guide (v1.0.0-ballot2: STU1 Ballot 2) based on FHIR (HL7® FHIR® Standard) v6.0.0. No current official version has been published yet. For a full list of available versions, see the Directory of published versions

Resource Profile: M11ResearchStudy - Detailed Descriptions

Page standards status: Draft Maturity Level: 1

Definitions for the m11-research-study resource profile.

Guidance on how to interpret the contents of this table can be found here

0. ResearchStudy
Definition

A scientific study of nature that sometimes includes processes involved in health and disease. For example, clinical trials are research studies that involve people. These studies may be related to new ways to screen, prevent, diagnose, and treat disease. They may also study certain outcomes and certain groups of people by looking at data collected in the past or future.

ShortInvestigation to increase healthcare-related patient-independent knowledge
Comments

Need to make sure we encompass public health studies.

Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesClinical Trial, Study
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. ResearchStudy.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. ResearchStudy.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. ResearchStudy.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. ResearchStudy.extension:author
    Slice Nameauthor
    Definition

    An individual or organization primarily involved in the creation and maintenance of the artifact.

    ShortWho authored the artifact
    Control0..*
    TypeExtension(Artifact Author) (Extension Type: ContactDetail)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. ResearchStudy.extension:relatesTo
    Slice NamerelatesTo
    Definition

    Resource (FHIR or non-FHIR) associated with the Resource.

    ShortRelated artifact
    Control0..*
    TypeExtension(RelatesTo) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. ResearchStudy.extension:RelatesToWithQuotation
    Slice NameRelatesToWithQuotation
    Definition

    Resource (FHIR or non-FHIR) associated with the Resource, plus specification of a portion quoted from the Resource.

    ShortRelated artifact with quoted portion
    Control0..*
    TypeExtension(RelatesToWithQuotation) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. ResearchStudy.extension:confidentialityStatement
    Slice NameconfidentialityStatement
    Definition

    Sponsor Confidentiality Statement, if applicable.

    ShortSponsor Confidentiality Statement, if applicable.
    Control0..1
    TypeExtension(ResearchStudySponsorConfidentialityStatement) (Extension Type: string)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. ResearchStudy.extension:saeReportingMethod
    Slice NamesaeReportingMethod
    Definition

    Method for reporting Serious Adverse Events.

    ShortMethod for reporting Serious Adverse Events.
    Comments

    Report Serious Adverse Events to the sponsor. Enter SAE reporting method(s). Refer to Section 9.4 for detailed reporting instructions.

    Control0..1
    TypeExtension(ResearchStudySaeReportingMethod) (Extension Type: string)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. ResearchStudy.extension:studyAmendment
    Slice NamestudyAmendment
    Definition

    An amendment to a study protocol.

    ShortAn amendment to a study protocol
    Control0..1
    TypeExtension(ResearchStudyStudyAmendment) (Complex Extension)
    Is Modifierfalse
    Must Supportfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. ResearchStudy.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. ResearchStudy.title
    Definition

    The human readable name of the research study.

    ShortHuman readable name of the study
    Comments

    The protocol should have a descriptive title that identifies the scientific aspects of the trial sufficiently to ensure it is immediately evident what the trial is investigating and on whom, and to allow retrieval from literature or internet searches.

    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. ResearchStudy.status
    Definition

    The publication state of the resource (not of the study).

    Shortdraft | active | retired | unknown
    Control1..1
    BindingThe codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2
    (required to http://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2)

    Codes that convey the current publication status of the research study resource.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. ResearchStudy
    2. ResearchStudy.extension
    SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. ResearchStudy.extension:author
      Slice Nameauthor
      Control0..*
      TypeExtension(Artifact Author) (Extension Type: ContactDetail)
      6. ResearchStudy.extension:relatesTo
      Slice NamerelatesTo
      Control0..*
      TypeExtension(RelatesTo) (Complex Extension)
      8. ResearchStudy.extension:RelatesToWithQuotation
      Slice NameRelatesToWithQuotation
      Control0..*
      TypeExtension(RelatesToWithQuotation) (Complex Extension)
      10. ResearchStudy.extension:confidentialityStatement
      Slice NameconfidentialityStatement
      Control0..1
      TypeExtension(ResearchStudySponsorConfidentialityStatement) (Extension Type: string)
      12. ResearchStudy.extension:saeReportingMethod
      Slice NamesaeReportingMethod
      Control0..1
      TypeExtension(ResearchStudySaeReportingMethod) (Extension Type: string)
      14. ResearchStudy.extension:studyAmendment
      Slice NamestudyAmendment
      Control0..1
      TypeExtension(ResearchStudyStudyAmendment) (Complex Extension)
      16. ResearchStudy.title
      Comments

      The protocol should have a descriptive title that identifies the scientific aspects of the trial sufficiently to ensure it is immediately evident what the trial is investigating and on whom, and to allow retrieval from literature or internet searches.

      18. ResearchStudy.comparisonGroup
      20. ResearchStudy.comparisonGroup.extension
      SlicingThis element introduces a set of slices on ResearchStudy.comparisonGroup.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 22. ResearchStudy.comparisonGroup.extension:eligibility
        Slice Nameeligibility
        Control0..1
        TypeExtension(ResearchStudyComparisonGroupEligibility) (Extension Type: Reference(Group))
        24. ResearchStudy.objective
        26. ResearchStudy.objective.extension
        SlicingThis element introduces a set of slices on ResearchStudy.objective.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 28. ResearchStudy.objective.extension:outcomeMeasure
          Slice NameoutcomeMeasure
          Control0..*
          TypeExtension(ResearchStudyOutcomeMeasure) (Complex Extension)

          Guidance on how to interpret the contents of this table can be found here

          0. ResearchStudy
          Definition

          A scientific study of nature that sometimes includes processes involved in health and disease. For example, clinical trials are research studies that involve people. These studies may be related to new ways to screen, prevent, diagnose, and treat disease. They may also study certain outcomes and certain groups of people by looking at data collected in the past or future.

          ShortInvestigation to increase healthcare-related patient-independent knowledge
          Comments

          Need to make sure we encompass public health studies.

          Control0..*
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate NamesClinical Trial, Study
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          2. ResearchStudy.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

          Control0..1
          Typeid
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          4. ResearchStudy.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. ResearchStudy.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. ResearchStudy.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHALL be taken from AllLanguages
          (required to http://hl7.org/fhir/ValueSet/all-languages|6.0.0-ballot2)

          IETF language tag for a human language

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. ResearchStudy.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          This element is affected by the following invariants: dom-6
          TypeNarrative
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. ResearchStudy.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

          Control0..*
          This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
          TypeResource
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. ResearchStudy.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. ResearchStudy.extension:author
            Slice Nameauthor
            Definition

            An individual or organization primarily involved in the creation and maintenance of the artifact.

            ShortWho authored the artifact
            Control0..*
            TypeExtension(Artifact Author) (Extension Type: ContactDetail)
            Is Modifierfalse
            Must Supportfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. ResearchStudy.extension:relatesTo
            Slice NamerelatesTo
            Definition

            Resource (FHIR or non-FHIR) associated with the Resource.

            ShortRelated artifact
            Control0..*
            TypeExtension(RelatesTo) (Complex Extension)
            Is Modifierfalse
            Must Supportfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. ResearchStudy.extension:RelatesToWithQuotation
            Slice NameRelatesToWithQuotation
            Definition

            Resource (FHIR or non-FHIR) associated with the Resource, plus specification of a portion quoted from the Resource.

            ShortRelated artifact with quoted portion
            Control0..*
            TypeExtension(RelatesToWithQuotation) (Complex Extension)
            Is Modifierfalse
            Must Supportfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            22. ResearchStudy.extension:confidentialityStatement
            Slice NameconfidentialityStatement
            Definition

            Sponsor Confidentiality Statement, if applicable.

            ShortSponsor Confidentiality Statement, if applicable.
            Control0..1
            TypeExtension(ResearchStudySponsorConfidentialityStatement) (Extension Type: string)
            Is Modifierfalse
            Must Supportfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            24. ResearchStudy.extension:saeReportingMethod
            Slice NamesaeReportingMethod
            Definition

            Method for reporting Serious Adverse Events.

            ShortMethod for reporting Serious Adverse Events.
            Comments

            Report Serious Adverse Events to the sponsor. Enter SAE reporting method(s). Refer to Section 9.4 for detailed reporting instructions.

            Control0..1
            TypeExtension(ResearchStudySaeReportingMethod) (Extension Type: string)
            Is Modifierfalse
            Must Supportfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            26. ResearchStudy.extension:studyAmendment
            Slice NamestudyAmendment
            Definition

            An amendment to a study protocol.

            ShortAn amendment to a study protocol
            Control0..1
            TypeExtension(ResearchStudyStudyAmendment) (Complex Extension)
            Is Modifierfalse
            Must Supportfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. ResearchStudy.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Must Supportfalse
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. ResearchStudy.url
            Definition

            Canonical identifier for this study resource, represented as a globally unique URI.

            ShortCanonical identifier for this study resource
            Control0..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. ResearchStudy.identifier
            Definition

            Identifiers assigned to this research study by the sponsor or other systems.

            ShortBusiness Identifier for study
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            34. ResearchStudy.version
            Definition

            The business version for the study record.

            ShortThe business version for the study record
            NoteThis is a business version Id, not a resource version Id (see discussion)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            36. ResearchStudy.name
            Definition

            Name for this study (computer friendly).

            ShortName for this study (computer friendly)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            38. ResearchStudy.title
            Definition

            The human readable name of the research study.

            ShortHuman readable name of the study
            Comments

            The protocol should have a descriptive title that identifies the scientific aspects of the trial sufficiently to ensure it is immediately evident what the trial is investigating and on whom, and to allow retrieval from literature or internet searches.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. ResearchStudy.label
            Definition

            Additional names for the study.

            ShortAdditional names for the study
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. ResearchStudy.label.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            44. ResearchStudy.label.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. ResearchStudy.label.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            48. ResearchStudy.label.type
            Definition

            Kind of name.

            Shortprimary | official | scientific | plain-language | subtitle | short-title | acronym | earlier-title | language | auto-translated | human-use | machine-use | duplicate-uid
            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from TitleType
            (extensible to http://hl7.org/fhir/ValueSet/title-type)

            desc.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. ResearchStudy.label.value
            Definition

            The name.

            ShortThe name
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. ResearchStudy.protocol
            Definition

            The set of steps expected to be performed as part of the execution of the study.

            ShortSteps followed in executing study
            Control0..*
            TypeReference(PlanDefinition)
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. ResearchStudy.partOf
            Definition

            A larger research study of which this particular study is a component or step.

            ShortPart of larger study
            Control0..*
            TypeReference(ResearchStudy)
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            Allows breaking a study into components (e.g. by study site) each with their own PI, status, enrollment, etc.

            Alternate Namescontainer
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. ResearchStudy.relatedArtifact
            Definition

            Citations, references, URLs and other related documents. When using relatedArtifact to share URLs, the relatedArtifact.type will often be set to one of "documentation" or "supported-with" and the URL value will often be in relatedArtifact.document.url but another possible location is relatedArtifact.resource when it is a canonical URL.

            ShortReferences, URLs, and attachments
            Control0..*
            TypeRelatedArtifact
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. ResearchStudy.date
            Definition

            The date (and optionally time) when the ResearchStudy Resource was last significantly changed. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the ResearchStudy Resource changes.

            ShortDate the resource last changed
            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            60. ResearchStudy.status
            Definition

            The publication state of the resource (not of the study).

            Shortdraft | active | retired | unknown
            Control1..1
            BindingThe codes SHALL be taken from PublicationStatus
            (required to http://hl7.org/fhir/ValueSet/publication-status|6.0.0-ballot2)

            Codes that convey the current publication status of the research study resource.

            Typecode
            Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. ResearchStudy.primaryPurposeType
            Definition

            The type of study based upon the intent of the study activities. A classification of the intent of the study.

            Shorttreatment | prevention | diagnostic | supportive-care | screening | health-services-research | basic-science | device-feasibility
            Control0..1
            BindingThe codes SHOULD be taken from ResearchStudyPrimaryPurposeType
            (preferred to http://hl7.org/fhir/ValueSet/research-study-prim-purp-type)

            Codes for the main intent of the study.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. ResearchStudy.phase
            Definition

            The stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

            Shortn-a | early-phase-1 | phase-1 | phase-1-phase-2 | phase-2 | phase-2-phase-3 | phase-3 | phase-4
            Control0..1
            BindingFor example codes, see ResearchStudyPhase
            (example to http://hl7.org/fhir/ValueSet/research-study-phase)

            Codes for the stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. ResearchStudy.studyDesign
            Definition

            Codes categorizing the type of study such as investigational vs. observational, type of blinding, type of randomization, safety vs. efficacy, etc.

            ShortClassifications of the study design characteristics
            Control0..*
            BindingThe codes SHOULD be taken from StudyDesign
            (preferred to http://hl7.org/fhir/ValueSet/study-design)

            This is a set of terms for study design characteristics.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. ResearchStudy.focus
            Definition

            The medication(s), food(s), therapy(ies), device(s) or other concerns or interventions that the study is seeking to gain more information about.

            ShortDrugs, devices, etc. under study
            Control0..*
            BindingFor example codes, see ResearchStudyFocusType
            (example to http://hl7.org/fhir/ValueSet/research-study-focus-type)

            Common codes of research study focus

            TypeCodeableReference(Medication, MedicinalProductDefinition, SubstanceDefinition, EvidenceVariable)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. ResearchStudy.condition
            Definition

            The condition that is the focus of the study. For example, In a study to examine risk factors for Lupus, might have as an inclusion criterion "healthy volunteer", but the target condition code would be a Lupus SNOMED code.

            ShortCondition being studied
            Control0..*
            BindingFor example codes, see ConditionProblemDiagnosisCodes
            (example to http://hl7.org/fhir/ValueSet/condition-code)

            Identification of the condition or diagnosis.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. ResearchStudy.keyword
            Definition

            Key terms to aid in searching for or filtering the study.

            ShortUsed to search for the study
            Control0..*
            Binding

            Words associated with the study that may be useful in discovery.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            74. ResearchStudy.region
            Definition

            A country, state or other area where the study is taking place rather than its precise geographic location or address.

            ShortGeographic area for the study
            Control0..*
            BindingUnless not suitable, these codes SHALL be taken from JurisdictionValueSet
            (extensible to http://hl7.org/fhir/ValueSet/jurisdiction)

            Countries and regions within which this artifact is targeted for use.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            76. ResearchStudy.descriptionSummary
            Definition

            A brief text for explaining the study.

            ShortBrief text explaining the study
            Control0..1
            Typemarkdown
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            78. ResearchStudy.description
            Definition

            A detailed and human-readable narrative of the study. E.g., study abstract.

            ShortDetailed narrative of the study
            Control0..1
            Typemarkdown
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            80. ResearchStudy.period
            Definition

            Identifies the start date and the expected (or actual, depending on status) end date for the study.

            ShortWhen the study began and ended
            Control0..1
            TypePeriod
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Alternate Namestiming
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. ResearchStudy.site
            Definition

            A facility in which study activities are conducted.

            ShortFacility where study activities are conducted
            Control0..*
            TypeReference(Location, ResearchStudy, Organization)
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            84. ResearchStudy.note
            Definition

            Comments made about the study by the performer, subject or other participants.

            ShortComments made about the study
            Control0..*
            TypeAnnotation
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            86. ResearchStudy.classifier
            Definition

            Additional grouping mechanism or categorization of a research study. Example: FDA regulated device, FDA regulated drug, MPG Paragraph 23b (a German legal requirement), IRB-exempt, etc. Implementation Note: do not use the classifier element to support existing semantics that are already supported thru explicit elements in the resource.

            ShortClassification for the study
            Control0..*
            BindingFor example codes, see ResearchStudyClassifiers
            (example to http://hl7.org/fhir/ValueSet/research-study-classifiers)

            desc.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            88. ResearchStudy.associatedParty
            Definition

            Sponsors, collaborators, and other parties.

            ShortSponsors, collaborators, and other parties
            Comments

            For a Sponsor or a PrincipalInvestigator use the dedicated attributes provided.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Requirements

            While there are explicit attributes for a Sponsor and a PrincipalInvestigator many trial record a range of other organizations and individuals in key roles.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            90. ResearchStudy.associatedParty.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            92. ResearchStudy.associatedParty.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            94. ResearchStudy.associatedParty.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            96. ResearchStudy.associatedParty.name
            Definition

            Name of associated party.

            ShortName of associated party
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            98. ResearchStudy.associatedParty.role
            Definition

            Type of association.

            Shortsponsor | lead-sponsor | sponsor-investigator | primary-investigator | collaborator | funding-source | general-contact | recruitment-contact | sub-investigator | study-director | study-chair
            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from ResearchStudyPartyRole
            (extensible to http://hl7.org/fhir/ValueSet/research-study-party-role)

            desc.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            100. ResearchStudy.associatedParty.period
            Definition

            Identifies the start date and the end date of the associated party in the role.

            ShortWhen active in the role
            Comments

            The cardinality is 0..* due to the fact that an associated party may be intermittently active in a given role over multiple time periods.

            Control0..*
            TypePeriod
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            102. ResearchStudy.associatedParty.classifier
            Definition

            A categorization other than role for the associated party.

            Shortnih | fda | government | nonprofit | academic | industry
            Control0..*
            BindingFor example codes, see ResearchStudyPartyOrgType
            (example to http://hl7.org/fhir/ValueSet/research-study-party-organization-type)

            A characterization or type of the entity.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            104. ResearchStudy.associatedParty.party
            Definition

            Individual or organization associated with study (use practitionerRole to specify their organisation).

            ShortIndividual or organization associated with study (use practitionerRole to specify their organisation)
            Comments

            Suggestions of a better attribute name are appreciated

            Control0..1
            TypeReference(Practitioner, PractitionerRole, Organization)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            106. ResearchStudy.progressStatus
            Definition

            Status of study with time for that status.

            ShortStatus of study with time for that status
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            108. ResearchStudy.progressStatus.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            110. ResearchStudy.progressStatus.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            112. ResearchStudy.progressStatus.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            114. ResearchStudy.progressStatus.state
            Definition

            Label for status or state (e.g. recruitment status).

            ShortLabel for status or state (e.g. recruitment status)
            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from ResearchStudyStatus
            (extensible to http://hl7.org/fhir/ValueSet/research-study-status)

            defn.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            116. ResearchStudy.progressStatus.actual
            Definition

            An indication of whether or not the date is a known date when the state changed or will change. A value of true indicates a known date. A value of false indicates an estimated date.

            ShortActual if true else anticipated
            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            118. ResearchStudy.progressStatus.period
            Definition

            Date range.

            ShortDate range
            Control0..1
            TypePeriod
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            120. ResearchStudy.whyStopped
            Definition

            A description and/or code explaining the premature termination of the study.

            Shortaccrual-goal-met | closed-due-to-toxicity | closed-due-to-lack-of-study-progress | temporarily-closed-per-study-design
            Control0..1
            BindingFor example codes, see ResearchStudyReasonStopped
            (example to http://hl7.org/fhir/ValueSet/research-study-reason-stopped)

            Codes for why the study ended prematurely.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            122. ResearchStudy.recruitment
            Definition

            Target or actual group of participants enrolled in study.

            ShortTarget or actual group of participants enrolled in study
            Control0..1
            TypeBackboneElement
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            124. ResearchStudy.recruitment.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            126. ResearchStudy.recruitment.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            128. ResearchStudy.recruitment.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            130. ResearchStudy.recruitment.targetNumber
            Definition

            Estimated total number of participants to be enrolled.

            ShortEstimated total number of participants to be enrolled
            Control0..1
            TypeunsignedInt
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            132. ResearchStudy.recruitment.actualNumber
            Definition

            Actual total number of participants enrolled in study.

            ShortActual total number of participants enrolled in study
            Control0..1
            TypeunsignedInt
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            134. ResearchStudy.recruitment.eligibility
            Definition

            Inclusion and exclusion criteria.

            ShortInclusion and exclusion criteria
            Control0..1
            TypeReference(Group, EvidenceVariable)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            136. ResearchStudy.recruitment.actualGroup
            Definition

            Group of participants who were enrolled in study.

            ShortGroup of participants who were enrolled in study
            Control0..1
            TypeReference(Group)
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            138. ResearchStudy.comparisonGroup
            Definition

            Describes an expected event or sequence of events for one of the subjects of a study. E.g. for a living subject: exposure to drug A, wash-out, exposure to drug B, wash-out, follow-up. E.g. for a stability study: {store sample from lot A at 25 degrees for 1 month}, {store sample from lot A at 40 degrees for 1 month}.

            ShortDefined path through the study for a subject
            Comments

            In many clinical trials this is refered to as the ARM of the study, but such a term is not used in other sorts of trials even when there is a comparison between two or more groups.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Alternate Namesarm
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            140. ResearchStudy.comparisonGroup.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            142. ResearchStudy.comparisonGroup.extension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on ResearchStudy.comparisonGroup.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 144. ResearchStudy.comparisonGroup.extension:eligibility
              Slice Nameeligibility
              Definition

              Inclusion and exclusion criteria for the comparison group as a subset of the eligibility for the overall study. The referenced Group Resource should have a membership element value of either 'definitional' or 'conceptual'.

              ShortInclusion and exclusion criteria for the comparison group.
              Control0..1
              TypeExtension(ResearchStudyComparisonGroupEligibility) (Extension Type: Reference(Group))
              Is Modifierfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              146. ResearchStudy.comparisonGroup.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              148. ResearchStudy.comparisonGroup.linkId
              Definition

              Allows the comparisonGroup for the study and the comparisonGroup for the subject to be linked easily.

              ShortAllows the comparisonGroup for the study and the comparisonGroup for the subject to be linked easily
              Control0..1
              Typeid
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              150. ResearchStudy.comparisonGroup.name
              Definition

              Unique, human-readable label for this comparisonGroup of the study.

              ShortLabel for study comparisonGroup
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              152. ResearchStudy.comparisonGroup.type
              Definition

              Categorization of study comparisonGroup, e.g. experimental, active comparator, placebo comparater.

              ShortCategorization of study comparisonGroup
              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from ResearchStudyArmType
              (extensible to http://hl7.org/fhir/ValueSet/research-study-arm-type)

              desc.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              154. ResearchStudy.comparisonGroup.description
              Definition

              A succinct description of the path through the study that would be followed by a subject adhering to this comparisonGroup.

              ShortShort explanation of study path
              Control0..1
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              156. ResearchStudy.comparisonGroup.intendedExposure
              Definition

              Interventions or exposures in this comparisonGroup or cohort.

              ShortInterventions or exposures in this comparisonGroup or cohort
              Control0..*
              TypeReference(EvidenceVariable)
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Requirements

              this is necessary for ClinicalTrials.gov use which relates 1 to many interventions to comparisonGroups (aka arms)

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              158. ResearchStudy.comparisonGroup.observedGroup
              Definition

              Group of participants who were enrolled in study comparisonGroup.

              ShortGroup of participants who were enrolled in study comparisonGroup
              Control0..1
              TypeReference(Group)
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Requirements

              This is necessary to relate comparisonGroups to actual groups

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              160. ResearchStudy.objective
              Definition

              A goal that the study is aiming to achieve in terms of a scientific question to be answered by the analysis of data collected during the study.

              ShortA goal for the study
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              162. ResearchStudy.objective.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              164. ResearchStudy.objective.extension
              Definition

              An Extension

              ShortExtension
              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on ResearchStudy.objective.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 166. ResearchStudy.objective.extension:outcomeMeasure
                Slice NameoutcomeMeasure
                Definition

                An outcome measure, endpoint, effect measure or measure of effect is a specific measurement or observation used to quantify the effect of experimental variables on the participants in a study, or for observational studies, to describe patterns of diseases or traits or associations with exposures, risk factors or treatment.

                ShortA variable measured during the study
                Control0..*
                TypeExtension(ResearchStudyOutcomeMeasure) (Complex Extension)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                168. ResearchStudy.objective.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                170. ResearchStudy.objective.name
                Definition

                Unique, human-readable label for this objective of the study.

                ShortLabel for the objective
                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                172. ResearchStudy.objective.type
                Definition

                The kind of study objective.

                Shortprimary | secondary | exploratory
                Control0..1
                BindingThe codes SHOULD be taken from ResearchStudyObjectiveType
                (preferred to http://hl7.org/fhir/ValueSet/research-study-objective-type)

                Codes for the kind of study objective.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                174. ResearchStudy.objective.description
                Definition

                Free text description of the objective of the study. This is what the study is trying to achieve rather than how it is going to achieve it (see ResearchStudy.description).

                ShortDescription of the objective
                Control0..1
                Typemarkdown
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                176. ResearchStudy.outcomeMeasure
                Definition

                An "outcome measure", "endpoint", "effect measure" or "measure of effect" is a specific measurement or observation used to quantify the effect of experimental variables on the participants in a study, or for observational studies, to describe patterns of diseases or traits or associations with exposures, risk factors or treatment.

                ShortA variable measured during the study
                Comments

                A study may have multiple distinct outcome measures that can be used to assess the overall goal for a study. The goal of a study is in the objective whereas the metric by which the goal is assessed is the outcomeMeasure. Examples: Time to Local Recurrence (TLR), Disease-free Survival (DFS), 30 Day Mortality, Systolic BP

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                178. ResearchStudy.outcomeMeasure.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                180. ResearchStudy.outcomeMeasure.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                182. ResearchStudy.outcomeMeasure.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                184. ResearchStudy.outcomeMeasure.name
                Definition

                Label for the outcome.

                ShortLabel for the outcome
                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                186. ResearchStudy.outcomeMeasure.type
                Definition

                The parameter or characteristic being assessed as one of the values by which the study is assessed.

                Shortprimary | secondary | exploratory
                Control0..*
                BindingThe codes SHOULD be taken from ResearchStudyObjectiveType
                (preferred to http://hl7.org/fhir/ValueSet/research-study-objective-type)

                defn.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                188. ResearchStudy.outcomeMeasure.description
                Definition

                Description of the outcome.

                ShortDescription of the outcome
                Control0..1
                Typemarkdown
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                190. ResearchStudy.outcomeMeasure.reference
                Definition

                Structured outcome definition.

                ShortStructured outcome definition
                Control0..1
                TypeReference(EvidenceVariable)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                192. ResearchStudy.result
                Definition

                Link to one or more sets of results generated by the study. Could also link to a research registry holding the results such as ClinicalTrials.gov.

                ShortLink to results generated during the study
                Control0..*
                TypeReference(Citation, Composition, DiagnosticReport)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))