This page is part of the Quality Measure Implementation Guide (v1.0.0-ballot: STU1 (v1.0.0) Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. . For a full list of available versions, see the Directory of published versions
Active as of 2024-12-16 |
Definitions for the cqm-appliesTo extension.
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Indicates the population that this stratifier should apply to. If no appliesTo extension is present, the stratifier is calculated based on the result of the population calculation (e.g. the calculated numerator for a proportion scoring). |
Short | Which population does this stratifier apply to? |
Control | 1..* |
2. Extension.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | http://hl7.org/fhir/uv/cqm/StructureDefinition/cqm-appliesTo |
4. Extension.value[x] | |
Binding | Unless not suitable, these codes SHALL be taken from MeasurePopulationType (extensible to http://terminology.hl7.org/ValueSet/measure-population )Indicates the population |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Indicates the population that this stratifier should apply to. If no appliesTo extension is present, the stratifier is calculated based on the result of the population calculation (e.g. the calculated numerator for a proportion scoring). Optional Extension Element - found in all resources. |
Short | Which population does this stratifier apply to?Optional Extensions Element |
Control | 10..* This element is affected by the following invariants: ele-1 |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
2. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/uv/cqm/StructureDefinition/cqm-appliesTo |
4. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from For codes, see MeasurePopulationType (extensible to http://terminology.hl7.org/ValueSet/measure-population )Indicates the population |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Indicates the population that this stratifier should apply to. If no appliesTo extension is present, the stratifier is calculated based on the result of the population calculation (e.g. the calculated numerator for a proportion scoring). |
Short | Which population does this stratifier apply to? |
Control | 1..* This element is affected by the following invariants: ele-1 |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
2. Extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
4. Extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/uv/cqm/StructureDefinition/cqm-appliesTo |
8. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from MeasurePopulationType (extensible to http://terminology.hl7.org/ValueSet/measure-population )Indicates the population |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |