SDOH Clinical Care
2.2.0 - STU 2.2 United States of America flag

This page is part of the SDOH Clinical Care for Multiple Domains (v2.2.0: STU 2.2) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: SDOHCCObservationScreeningResponse - Detailed Descriptions

Page standards status: Trial-use

Definitions for the SDOHCC-ObservationScreeningResponse resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Observation
Definition

For Observations derived from SDOH screening surveys/questionnaires.

ShortSDOH screening questionnaire observations
Comments

Used for simple observations such as education status, food insecurity observations, etc.
This profile allows the representation of SDOH observations based on SDOH screening questionnaire responses (which can also be represented using SDC QuestionnaireResponse).

Many of the SDOHCC profiles reference one another. One flow supported by this IG is that QuestionnaireResponses result in Observations that can be used as evidence for Conditions that can lead to Goals, ServiceRequests and Procedures. However, alternatives paths are also possible.

2. Observation.status
Definition

The status of the observation value.

Shortfinal | corrected | entered-in-error | unknown
BindingThe codes SHALL be taken from SDOHCC ValueSet Observation Status
(required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetObservationStatus)
Must Supporttrue
Requirements

Further constrained to values that are relevant for SDOH.

4. Observation.category
Control2..?
Requirements

To identify that an SDOH observation screening response is derived from an SDOH questionnaire, the “social-history” and “survey” codes are required.

SlicingThis element introduces a set of slices on Observation.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
  • 6. Observation.category:SocialHistory
    Slice NameSocialHistory
    Control1..1
    Must Supporttrue
    Requirements

    Used for filtering social history observations.

    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
        "code" : "social-history"
      }]
    }
    8. Observation.category:Survey
    Slice NameSurvey
    Control1..1
    Must Supporttrue
    Requirements

    Used for filtering observations derived from a survey/questionnaire.

    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
        "code" : "survey"
      }]
    }
    10. Observation.category:SDOH
    Slice NameSDOH
    Definition

    An SDOH category assigned to the observation.

    Shorte.g., food-insecurity | transportation-insecurity
    Control0..*
    BindingThe codes SHALL be taken from SDOHCC ValueSet SDOH Category
    (required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetSDOHCategory)

    Codes for high-level SDOH categories.

    Must Supporttrue
    Requirements

    Codes from this value set can be used to assign one or more SDOH categories (e.g., food-insecurity, transportation-insecurity, etc.) to an observation. It is recommended that SDOH category codes be used to facilitate searching for SDOH observations.

    12. Observation.code
    BindingThe codes SHALL be taken from LOINCCodes
    (required to http://hl7.org/fhir/ValueSet/observation-codes)

    Codes identifying names of simple observations.

    Additional BindingsPurposeUsage
    Digital Access Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-access
    LOINCCodesRequiredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-literacy
    Less Than High School Education Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): educational-attainment
    Elder Abuse Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): elder-abuse
    Unemployment Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): employment-status
    Financial Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): financial-insecurity
    Food Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): food-insecurity
    Health Insurance Coverage Status Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): health-insurance-coverage-status
    Homelessness Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): homelessness
    Housing Instability Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): housing-instability
    Inadequate Housing Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): inadequate-housing
    Intimate Partner Violence Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): intimate-partner-violence
    Material Hardship Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): material-hardship
    Medical Cost Burden Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): medical-cost-burden
    Health Literacy Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): personal-health-literacy
    Social Connection Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): social-connection
    Stress Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): stress
    Transportation Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): transportation-insecurity
    Utility Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): utility-insecurity
    Veteran Status Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): veteran-status
    LOINCCodesRequiredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): sdoh-category-unspecified
    Must Supporttrue
    Requirements

    Knowing what kind of observation is being made is essential to understanding the observation.

    The Gravity implemenation guide restricts questionnaire/survey observations to LOINC to move the industry to the use of LOINC panels/surveys (structures that are not available in other terminology systems) to standardize the coding of SDOH related risk assessment instruments. In addition, USCDI and US Core have standardized on the use of LOINC to represent Observations in general.

    14. Observation.subject
    Comments

    Cardinality is 1..1.

    Control1..?
    TypeReference(US Core Patient Profile)
    Must Supporttrue
    16. Observation.effective[x]
    Definition

    The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time".

    Comments

    At least a date should be present unless this observation is a historical report.

    Control1..?
    TypeChoice of: dateTime, Period, Timing, instant
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    18. Observation.performer
    TypeReference(RelatedPerson, US Core Patient Profile, US Core Practitioner Profile, US Core PractitionerRole Profile, US Core Organization Profile, US Core CareTeam Profile)
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Requirements

    Some questions on an SDOH screening questionnaire are not answered directly (e.g., asserted) by the individual completing the questionnaire. Rather, the answer to some questions (e.g., the Hunger Vital Sign 88124-3 “Food insecurity risk”) may be derived from answers to one or more other questions. For an Observation Screening Response that is derived, as opposed to answered directly, Observation.performer should not be specified.

    20. Observation.value[x]
    Comments

    An observation exists to have a value, though it might not if it is in error, if it represents a group of observations, or if a reason for its omission is captured by Observation.dataAbsentReason.

    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    Requirements

    An observation exists to have a value, though it might not if it is in error, if it represents a group of observations, or if it a reason for its omission is captured by Observation.dataAbsentReason.

    SlicingThis element introduces a set of slices on Observation.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 22. Observation.value[x]:valueQuantity
      Slice NamevalueQuantity
      Control0..1
      BindingThe codes SHALL be taken from UnitsOfMeasureCaseSensitive
      (required to http://terminology.hl7.org/ValueSet/v3-UnitsOfMeasureCaseSensitive)

      This is the entire UCUM code set.

      TypeQuantity
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      24. Observation.value[x]:valueCodeableConcept
      Slice NamevalueCodeableConcept
      Comments

      The allowed set of codes will be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value.

      Control0..1
      BindingThe codes SHOULD be taken from LOINCCodes
      (preferred to http://hl7.org/fhir/ValueSet/observation-codes)

      This value set includes all LOINC codes

      Additional BindingsPurposeUsage
      Digital Access Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-access
      LOINCCodesPreferredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-literacy
      Less Than High School Education Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): educational-attainment
      Elder Abuse Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): elder-abuse
      Unemployment Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): employment-status
      Financial Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): financial-insecurity
      Food Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): food-insecurity
      Health Insurance Coverage Status Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): health-insurance-coverage-status
      Homelessness Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): homelessness
      Housing Instability Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): housing-instability
      VSAC 2.16.840.1.113762.1.4.1196.178 .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): inadequate-housing
      Intimate Partner Violence Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): intimate-partner-violence
      Material Hardship Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): material-hardship
      Medical Cost Burden Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): medical-cost-burden
      Health Literacy Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): personal-health-literacy
      Social Connection Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): social-connection
      Stress Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): stress
      Transportation Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): transportation-insecurity
      Utility Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): utility-insecurity
      Veteran Status Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): veteran-status
      LOINCCodesPreferredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): sdoh-category-unspecified
      TypeCodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      26. Observation.dataAbsentReason
      Comments

      "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For a given LOINC question, if the LOINC answer list includes concepts such as 'unknown' or 'not available', they should be used for Observation.value. Where these concepts are not part of the value set for Observation.value, the Observation.dataAbsentReason can be used if necessary and appropriate.

      Must Supporttrue
      28. Observation.bodySite
      Control0..0
      30. Observation.specimen
      Control0..0
      32. Observation.hasMember
      Definition

      References the child observations of a grouping observation.

      ShortReferences the child observations of a grouping observation
      SlicingThis element introduces a set of slices on Observation.hasMember. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • profile @ $this.resolve()
      • 34. Observation.hasMember:SupportedHasMember
        Slice NameSupportedHasMember
        Definition

        This is the set of child observations that are expected to be supported by SDOH implementations.

        ShortFor an Observation Grouping, the Observations generated from an assessment instrument
        Comments

        Other types of observations or resources can still be sent, but SDOH systems aren't required to pay attention to them.

        Control0..*
        TypeReference(SDOHCC Observation Screening Response)
        Must Supporttrue
        Requirements

        Provides context to the child observations of "in what instrument/panel was this information collected", which is critical in situations where the child observations do not have derivedFrom relationships to a QuestionnaireResponse.

        36. Observation.derivedFrom
        Definition

        The target resource represents a QuestionnaireResponse or other Observation from which the value of this Observation was inferred or calculated.

        Comments

        All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value.

        TypeReference(DocumentReference, QuestionnaireResponse, Observation)
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        SlicingThis element introduces a set of slices on Observation.derivedFrom. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • profile @ $this.resolve()
        • 38. Observation.derivedFrom:SupportedDerivedFrom
          Slice NameSupportedDerivedFrom
          Definition

          The types of 'derivedFrom' resources that must be supported by implementations conforming to this IG

          ShortRelated questionnaire responses or observations that the observation is made from
          Comments

          Additional derivation targets (as supported by the underlying Observation resource) are allowed, but there is no expectation that implementers of this IG will pay attention to them.

          Control0..*
          TypeReference(SDOHCC Observation Screening Response, SDC Questionnaire Response)
          Must Supporttrue
          Must Support TypesNo must-support rules about the choice of types/profiles
          Requirements

          Allows traceability (and context) for Observations derived from a QuestionnaireResponse and also establishes links for observations that were calculated or inferred based on other Observations (e.g. for calculated scores).

          Guidance on how to interpret the contents of this table can be found here

          0. Observation
          Definition

          For Observations derived from SDOH screening surveys/questionnaires.


          Measurements and simple assertions made about a patient, device or other subject.

          ShortSDOH screening questionnaire observationsMeasurements and simple assertions
          Comments

          Used for simple observations such as education status, food insecurity observations, etc.
          This profile allows the representation of SDOH observations based on SDOH screening questionnaire responses (which can also be represented using SDC QuestionnaireResponse).

          Many of the SDOHCC profiles reference one another. One flow supported by this IG is that QuestionnaireResponses result in Observations that can be used as evidence for Conditions that can lead to Goals, ServiceRequests and Procedures. However, alternatives paths are also possible.


          Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

          Control0..*
          Is Modifierfalse
          Summaryfalse
          Alternate NamesVital Signs, Measurement, Results, Tests
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
          obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
          obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
          obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
          2. Observation.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          4. Observation.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Summaryfalse
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          6. Observation.status
          Definition

          The status of the observation value.


          The status of the result value.

          Shortfinal | corrected | entered-in-error | unknownregistered | preliminary | final | amended +
          Comments

          This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

          Control1..1
          BindingThe codes SHALL be taken from SDOHCC ValueSet Observation Statushttp://hl7.org/fhir/ValueSet/observation-status|4.0.1
          (required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetObservationStatus)
          Typecode
          Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Further constrained to values that are relevant for SDOH.


          Need to track the status of individual results. Some results are finalized before the whole report is finalized.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. Observation.category
          Definition

          A code that classifies the general type of observation being made.

          ShortClassification of type of observation
          Comments

          In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

          Control20..*
          BindingThe codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category
          (preferred to http://hl7.org/fhir/ValueSet/observation-category)

          Codes for high level observation categories.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          To identify that an SDOH observation screening response is derived from an SDOH questionnaire, the “social-history” and “survey” codes are required.


          Used for filtering what observations are retrieved and displayed.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Observation.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ $this
          • 10. Observation.category:SocialHistory
            Slice NameSocialHistory
            Definition

            A code that classifies the general type of observation being made.

            ShortClassification of type of observation
            Comments

            In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

            Control10..1*
            BindingThe codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category
            (preferred to http://hl7.org/fhir/ValueSet/observation-category)

            Codes for high level observation categories.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Used for filtering social history observations.


            Used for filtering what observations are retrieved and displayed.

            Pattern Value{
              "coding" : [{
                "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
                "code" : "social-history"
              }]
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            12. Observation.category:Survey
            Slice NameSurvey
            Definition

            A code that classifies the general type of observation being made.

            ShortClassification of type of observation
            Comments

            In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

            Control10..1*
            BindingThe codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category
            (preferred to http://hl7.org/fhir/ValueSet/observation-category)

            Codes for high level observation categories.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Used for filtering observations derived from a survey/questionnaire.


            Used for filtering what observations are retrieved and displayed.

            Pattern Value{
              "coding" : [{
                "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
                "code" : "survey"
              }]
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            14. Observation.category:SDOH
            Slice NameSDOH
            Definition

            An SDOH category assigned to the observation.


            A code that classifies the general type of observation being made.

            Shorte.g., food-insecurity | transportation-insecurityClassification of type of observation
            Comments

            In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

            Control0..*
            BindingThe codes SHALL be taken from The codes SHOULD be taken from SDOHCC ValueSet SDOH Categoryhttp://hl7.org/fhir/ValueSet/observation-category
            (required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetSDOHCategory)

            Codes for high-level SDOH categories.


            Codes for high level observation categories.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Codes from this value set can be used to assign one or more SDOH categories (e.g., food-insecurity, transportation-insecurity, etc.) to an observation. It is recommended that SDOH category codes be used to facilitate searching for SDOH observations.


            Used for filtering what observations are retrieved and displayed.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            16. Observation.code
            Definition

            Describes what was observed. Sometimes this is called the observation "name".

            ShortType of observation (code / type)
            Comments

            All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

            Control1..1
            BindingThe codes SHALL be taken from For example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
            (required to http://hl7.org/fhir/ValueSet/observation-codes)

            Codes identifying names of simple observations.

            Additional BindingsPurposeUsage
            Digital Access Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-access
            LOINCCodesRequiredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-literacy
            Less Than High School Education Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): educational-attainment
            Elder Abuse Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): elder-abuse
            Unemployment Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): employment-status
            Financial Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): financial-insecurity
            Food Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): food-insecurity
            Health Insurance Coverage Status Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): health-insurance-coverage-status
            Homelessness Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): homelessness
            Housing Instability Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): housing-instability
            Inadequate Housing Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): inadequate-housing
            Intimate Partner Violence Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): intimate-partner-violence
            Material Hardship Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): material-hardship
            Medical Cost Burden Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): medical-cost-burden
            Health Literacy Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): personal-health-literacy
            Social Connection Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): social-connection
            Stress Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): stress
            Transportation Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): transportation-insecurity
            Utility Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): utility-insecurity
            Veteran Status Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): veteran-status
            LOINCCodesRequiredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): sdoh-category-unspecified
            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Knowing what kind of observation is being made is essential to understanding the observation.

            The Gravity implemenation guide restricts questionnaire/survey observations to LOINC to move the industry to the use of LOINC panels/surveys (structures that are not available in other terminology systems) to standardize the coding of SDOH related risk assessment instruments. In addition, USCDI and US Core have standardized on the use of LOINC to represent Observations in general.


            Knowing what kind of observation is being made is essential to understanding the observation.

            Alternate NamesName
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            18. Observation.subject
            Definition

            The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

            ShortWho and/or what the observation is about
            Comments

            Cardinality is 1..1.


            One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

            Control10..1
            TypeReference(US Core Patient Profile, Patient, Group, Device, Location)
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Observations have no value if you don't know who or what they're about.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            20. Observation.effective[x]
            Definition

            The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time".


            The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

            ShortClinically relevant time/time-period for observation
            Comments

            At least a date should be present unless this observation is a historical report.


            At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

            Control10..1
            TypeChoice of: dateTime, Period, Timing, instant
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Summarytrue
            Requirements

            Knowing when an observation was deemed true is important to its relevance as well as determining trends.

            Alternate NamesOccurrence
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. Observation.performer
            Definition

            Who was responsible for asserting the observed value as "true".

            ShortWho is responsible for the observation
            Control0..*
            TypeReference(RelatedPerson, US Core Patient Profile, US Core Practitioner Profile, US Core PractitionerRole Profile, US Core Organization Profile, US Core CareTeam Profile, Practitioner, PractitionerRole, Organization, CareTeam, Patient)
            Is Modifierfalse
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Summarytrue
            Requirements

            Some questions on an SDOH screening questionnaire are not answered directly (e.g., asserted) by the individual completing the questionnaire. Rather, the answer to some questions (e.g., the Hunger Vital Sign 88124-3 “Food insecurity risk”) may be derived from answers to one or more other questions. For an Observation Screening Response that is derived, as opposed to answered directly, Observation.performer should not be specified.


            May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. Observation.value[x]
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortActual result
            Comments

            An observation exists to have a value, though it might not if it is in error, if it represents a group of observations, or if a reason for its omission is captured by Observation.dataAbsentReason.


            An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            This element is affected by the following invariants: obs-7
            TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, if it represents a group of observations, or if it a reason for its omission is captured by Observation.dataAbsentReason.


            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Observation.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • type @ $this
            • 26. Observation.value[x]:valueQuantity
              Slice NamevalueQuantity
              Definition

              The information determined as a result of making the observation, if the information has a simple value.

              ShortActual result
              Comments

              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

              Control0..1
              This element is affected by the following invariants: obs-7
              BindingThe codes SHALL be taken from For codes, see UnitsOfMeasureCaseSensitive
              (required to http://terminology.hl7.org/ValueSet/v3-UnitsOfMeasureCaseSensitive)

              This is the entire UCUM code set.

              TypeQuantity, dateTime, boolean, string, SampledData, Period, Ratio, integer, time, Range, CodeableConcept
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summarytrue
              Requirements

              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. Observation.value[x]:valueCodeableConcept
              Slice NamevalueCodeableConcept
              Definition

              The information determined as a result of making the observation, if the information has a simple value.

              ShortActual result
              Comments

              The allowed set of codes will be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value.


              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

              Control0..1
              This element is affected by the following invariants: obs-7
              BindingThe codes SHOULD be taken from For codes, see LOINCCodes
              (preferred to http://hl7.org/fhir/ValueSet/observation-codes)

              This value set includes all LOINC codes

              Additional BindingsPurposeUsage
              Digital Access Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-access
              LOINCCodesPreferredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-literacy
              Less Than High School Education Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): educational-attainment
              Elder Abuse Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): elder-abuse
              Unemployment Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): employment-status
              Financial Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): financial-insecurity
              Food Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): food-insecurity
              Health Insurance Coverage Status Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): health-insurance-coverage-status
              Homelessness Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): homelessness
              Housing Instability Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): housing-instability
              VSAC 2.16.840.1.113762.1.4.1196.178 .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): inadequate-housing
              Intimate Partner Violence Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): intimate-partner-violence
              Material Hardship Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): material-hardship
              Medical Cost Burden Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): medical-cost-burden
              Health Literacy Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): personal-health-literacy
              Social Connection Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): social-connection
              Stress Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): stress
              Transportation Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): transportation-insecurity
              Utility Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): utility-insecurity
              Veteran Status Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): veteran-status
              LOINCCodesPreferredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): sdoh-category-unspecified
              TypeCodeableConcept, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summarytrue
              Requirements

              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              30. Observation.dataAbsentReason
              Definition

              Provides a reason why the expected value in the element Observation.value[x] is missing.

              ShortWhy the result is missing
              Comments

              "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For a given LOINC question, if the LOINC answer list includes concepts such as 'unknown' or 'not available', they should be used for Observation.value. Where these concepts are not part of the value set for Observation.value, the Observation.dataAbsentReason can be used if necessary and appropriate.


              Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

              The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

              Control0..1
              This element is affected by the following invariants: obs-6
              BindingUnless not suitable, these codes SHALL be taken from DataAbsentReasonhttp://hl7.org/fhir/ValueSet/data-absent-reason
              (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

              Codes specifying why the result (Observation.value[x]) is missing.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              For many results it is necessary to handle exceptional values in measurements.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              32. Observation.bodySite
              Definition

              Indicates the site on the subject's body where the observation was made (i.e. the target site).

              ShortObserved body part
              Comments

              Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

              If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

              Control0..01
              BindingFor example codes, see SNOMEDCTBodyStructureshttp://hl7.org/fhir/ValueSet/body-site
              (example to http://hl7.org/fhir/ValueSet/body-site)

              Codes describing anatomical locations. May include laterality.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Observation.specimen
              Definition

              The specimen that was used when this observation was made.

              ShortSpecimen used for this observation
              Comments

              Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

              Control0..01
              TypeReference(Specimen)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. Observation.hasMember
              Definition

              References the child observations of a grouping observation.


              This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

              ShortReferences the child observations of a grouping observationRelated resource that belongs to the Observation group
              Comments

              When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

              Control0..*
              TypeReference(Observation, QuestionnaireResponse, MolecularSequence)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Observation.hasMember. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • profile @ $this.resolve()
              • 38. Observation.hasMember:SupportedHasMember
                Slice NameSupportedHasMember
                Definition

                This is the set of child observations that are expected to be supported by SDOH implementations.


                This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

                ShortFor an Observation Grouping, the Observations generated from an assessment instrumentRelated resource that belongs to the Observation group
                Comments

                Other types of observations or resources can still be sent, but SDOH systems aren't required to pay attention to them.


                When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

                Control0..*
                TypeReference(SDOHCC Observation Screening Response, Observation, QuestionnaireResponse, MolecularSequence)
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Provides context to the child observations of "in what instrument/panel was this information collected", which is critical in situations where the child observations do not have derivedFrom relationships to a QuestionnaireResponse.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                40. Observation.derivedFrom
                Definition

                The target resource represents a QuestionnaireResponse or other Observation from which the value of this Observation was inferred or calculated.


                The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.

                ShortRelated measurements the observation is made from
                Comments

                All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value.


                All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

                Control0..*
                TypeReference(DocumentReference, QuestionnaireResponse, Observation, ImagingStudy, Media, MolecularSequence)
                Is Modifierfalse
                Must Supporttrue
                Must Support TypesNo must-support rules about the choice of types/profiles
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Observation.derivedFrom. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • profile @ $this.resolve()
                • 42. Observation.derivedFrom:SupportedDerivedFrom
                  Slice NameSupportedDerivedFrom
                  Definition

                  The types of 'derivedFrom' resources that must be supported by implementations conforming to this IG


                  The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.

                  ShortRelated questionnaire responses or observations that the observation is made fromRelated measurements the observation is made from
                  Comments

                  Additional derivation targets (as supported by the underlying Observation resource) are allowed, but there is no expectation that implementers of this IG will pay attention to them.


                  All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

                  Control0..*
                  TypeReference(SDOHCC Observation Screening Response, SDC Questionnaire Response, DocumentReference, ImagingStudy, Media, QuestionnaireResponse, Observation, MolecularSequence)
                  Is Modifierfalse
                  Must Supporttrue
                  Must Support TypesNo must-support rules about the choice of types/profiles
                  Summarytrue
                  Requirements

                  Allows traceability (and context) for Observations derived from a QuestionnaireResponse and also establishes links for observations that were calculated or inferred based on other Observations (e.g. for calculated scores).

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                  Guidance on how to interpret the contents of this table can be found here

                  0. Observation
                  Definition

                  For Observations derived from SDOH screening surveys/questionnaires.

                  ShortSDOH screening questionnaire observations
                  Comments

                  Used for simple observations such as education status, food insecurity observations, etc.
                  This profile allows the representation of SDOH observations based on SDOH screening questionnaire responses (which can also be represented using SDC QuestionnaireResponse).

                  Many of the SDOHCC profiles reference one another. One flow supported by this IG is that QuestionnaireResponses result in Observations that can be used as evidence for Conditions that can lead to Goals, ServiceRequests and Procedures. However, alternatives paths are also possible.

                  Control0..*
                  Is Modifierfalse
                  Summaryfalse
                  Alternate NamesVital Signs, Measurement, Results, Tests
                  Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                  dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                  dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                  dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                  dom-6: A resource should have narrative for robust management (text.`div`.exists())
                  obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
                  obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
                  2. Observation.id
                  Definition

                  The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                  ShortLogical id of this artifact
                  Comments

                  The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                  Control0..1
                  Typeid
                  Is Modifierfalse
                  Summarytrue
                  4. Observation.meta
                  Definition

                  The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                  ShortMetadata about the resource
                  Control0..1
                  TypeMeta
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  6. Observation.implicitRules
                  Definition

                  A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                  ShortA set of rules under which this content was created
                  Comments

                  Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                  Control0..1
                  Typeuri
                  Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  8. Observation.language
                  Definition

                  The base language in which the resource is written.

                  ShortLanguage of the resource content
                  Comments

                  Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                  Control0..1
                  BindingThe codes SHOULD be taken from CommonLanguages
                  (preferred to http://hl7.org/fhir/ValueSet/languages)

                  A human language.

                  Additional BindingsPurpose
                  AllLanguagesMax Binding
                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  10. Observation.text
                  Definition

                  A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                  ShortText summary of the resource, for human interpretation
                  Comments

                  Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                  Control0..1
                  TypeNarrative
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesnarrative, html, xhtml, display
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  12. Observation.contained
                  Definition

                  These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                  ShortContained, inline Resources
                  Comments

                  This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                  Control0..*
                  TypeResource
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesinline resources, anonymous resources, contained resources
                  14. Observation.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  16. Observation.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                  Summaryfalse
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  18. Observation.identifier
                  Definition

                  A unique identifier assigned to this observation.

                  ShortBusiness Identifier for observation
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows observations to be distinguished and referenced.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  20. Observation.basedOn
                  Definition

                  A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed.

                  ShortFulfills plan, proposal or order
                  Control0..*
                  TypeReference(CarePlan, DeviceRequest, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ServiceRequest)
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

                  Alternate NamesFulfills
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  22. Observation.partOf
                  Definition

                  A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure.

                  ShortPart of referenced event
                  Comments

                  To link an Observation to an Encounter use encounter. See the Notes below for guidance on referencing another Observation.

                  Control0..*
                  TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Immunization, ImagingStudy)
                  Is Modifierfalse
                  Summarytrue
                  Alternate NamesContainer
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  24. Observation.status
                  Definition

                  The status of the observation value.

                  Shortfinal | corrected | entered-in-error | unknown
                  Comments

                  This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                  Control1..1
                  BindingThe codes SHALL be taken from SDOHCC ValueSet Observation Status
                  (required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetObservationStatus)
                  Typecode
                  Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Further constrained to values that are relevant for SDOH.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  26. Observation.category
                  Definition

                  A code that classifies the general type of observation being made.

                  ShortClassification of type of observation
                  Comments

                  In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                  Control2..*
                  BindingThe codes SHOULD be taken from ObservationCategoryCodes
                  (preferred to http://hl7.org/fhir/ValueSet/observation-category)

                  Codes for high level observation categories.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  To identify that an SDOH observation screening response is derived from an SDOH questionnaire, the “social-history” and “survey” codes are required.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Observation.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ $this
                  • 28. Observation.category:SocialHistory
                    Slice NameSocialHistory
                    Definition

                    A code that classifies the general type of observation being made.

                    ShortClassification of type of observation
                    Comments

                    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                    Control1..1
                    BindingThe codes SHOULD be taken from ObservationCategoryCodes
                    (preferred to http://hl7.org/fhir/ValueSet/observation-category)

                    Codes for high level observation categories.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summaryfalse
                    Requirements

                    Used for filtering social history observations.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
                        "code" : "social-history"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    30. Observation.category:Survey
                    Slice NameSurvey
                    Definition

                    A code that classifies the general type of observation being made.

                    ShortClassification of type of observation
                    Comments

                    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                    Control1..1
                    BindingThe codes SHOULD be taken from ObservationCategoryCodes
                    (preferred to http://hl7.org/fhir/ValueSet/observation-category)

                    Codes for high level observation categories.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summaryfalse
                    Requirements

                    Used for filtering observations derived from a survey/questionnaire.

                    Pattern Value{
                      "coding" : [{
                        "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
                        "code" : "survey"
                      }]
                    }
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    32. Observation.category:SDOH
                    Slice NameSDOH
                    Definition

                    An SDOH category assigned to the observation.

                    Shorte.g., food-insecurity | transportation-insecurity
                    Comments

                    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                    Control0..*
                    BindingThe codes SHALL be taken from SDOHCC ValueSet SDOH Category
                    (required to http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetSDOHCategory)

                    Codes for high-level SDOH categories.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summaryfalse
                    Requirements

                    Codes from this value set can be used to assign one or more SDOH categories (e.g., food-insecurity, transportation-insecurity, etc.) to an observation. It is recommended that SDOH category codes be used to facilitate searching for SDOH observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    34. Observation.code
                    Definition

                    Describes what was observed. Sometimes this is called the observation "name".

                    ShortType of observation (code / type)
                    Comments

                    All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                    Control1..1
                    BindingThe codes SHALL be taken from LOINCCodes
                    (required to http://hl7.org/fhir/ValueSet/observation-codes)

                    Codes identifying names of simple observations.

                    Additional BindingsPurposeUsage
                    Digital Access Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-access
                    LOINCCodesRequiredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-literacy
                    Less Than High School Education Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): educational-attainment
                    Elder Abuse Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): elder-abuse
                    Unemployment Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): employment-status
                    Financial Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): financial-insecurity
                    Food Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): food-insecurity
                    Health Insurance Coverage Status Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): health-insurance-coverage-status
                    Homelessness Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): homelessness
                    Housing Instability Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): housing-instability
                    Inadequate Housing Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): inadequate-housing
                    Intimate Partner Violence Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): intimate-partner-violence
                    Material Hardship Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): material-hardship
                    Medical Cost Burden Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): medical-cost-burden
                    Health Literacy Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): personal-health-literacy
                    Social Connection Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): social-connection
                    Stress Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): stress
                    Transportation Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): transportation-insecurity
                    Utility Insecurity Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): utility-insecurity
                    Veteran Status Screening Assessments And Questions .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): veteran-status
                    LOINCCodesRequiredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): sdoh-category-unspecified
                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Knowing what kind of observation is being made is essential to understanding the observation.

                    The Gravity implemenation guide restricts questionnaire/survey observations to LOINC to move the industry to the use of LOINC panels/surveys (structures that are not available in other terminology systems) to standardize the coding of SDOH related risk assessment instruments. In addition, USCDI and US Core have standardized on the use of LOINC to represent Observations in general.

                    Alternate NamesName
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    36. Observation.subject
                    Definition

                    The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

                    ShortWho and/or what the observation is about
                    Comments

                    Cardinality is 1..1.

                    Control1..1
                    TypeReference(US Core Patient Profile)
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Observations have no value if you don't know who or what they're about.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    38. Observation.focus
                    Definition

                    The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.

                    ShortWhat the observation is about, when it is not about the subject of record
                    Comments

                    Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use specimen if a reference to a specimen is required. If a code is required instead of a resource use either bodysite for bodysites or the standard extension focusCode.

                    Control0..*
                    TypeReference(Resource)
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    40. Observation.encounter
                    Definition

                    The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.

                    ShortHealthcare event during which this observation is made
                    Comments

                    This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

                    Control0..1
                    TypeReference(Encounter)
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    For some observations it may be important to know the link between an observation and a particular encounter.

                    Alternate NamesContext
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    42. Observation.effective[x]
                    Definition

                    The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time".

                    ShortClinically relevant time/time-period for observation
                    Comments

                    At least a date should be present unless this observation is a historical report.

                    Control1..1
                    TypeChoice of: dateTime, Period
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Must Support TypesNo must-support rules about the choice of types/profiles
                    Summarytrue
                    Requirements

                    Knowing when an observation was deemed true is important to its relevance as well as determining trends.

                    Alternate NamesOccurrence
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    44. Observation.issued
                    Definition

                    The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.

                    ShortDate/Time this version was made available
                    Comments

                    For Observations that don’t require review and verification, it may be the same as the lastUpdated time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as the lastUpdated time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.

                    Control0..1
                    Typeinstant
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    46. Observation.performer
                    Definition

                    Who was responsible for asserting the observed value as "true".

                    ShortWho is responsible for the observation
                    Control0..*
                    TypeReference(RelatedPerson, US Core Patient Profile, US Core Practitioner Profile, US Core PractitionerRole Profile, US Core Organization Profile, US Core CareTeam Profile)
                    Is Modifierfalse
                    Must Supporttrue
                    Must Support TypesNo must-support rules about the choice of types/profiles
                    Summarytrue
                    Requirements

                    Some questions on an SDOH screening questionnaire are not answered directly (e.g., asserted) by the individual completing the questionnaire. Rather, the answer to some questions (e.g., the Hunger Vital Sign 88124-3 “Food insecurity risk”) may be derived from answers to one or more other questions. For an Observation Screening Response that is derived, as opposed to answered directly, Observation.performer should not be specified.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    48. Observation.value[x]
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortActual result
                    Comments

                    An observation exists to have a value, though it might not if it is in error, if it represents a group of observations, or if a reason for its omission is captured by Observation.dataAbsentReason.

                    Control0..1
                    This element is affected by the following invariants: obs-7
                    TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Must Support TypesNo must-support rules about the choice of types/profiles
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, if it represents a group of observations, or if it a reason for its omission is captured by Observation.dataAbsentReason.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Observation.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • type @ $this
                    • 50. Observation.value[x]:valueQuantity
                      Slice NamevalueQuantity
                      Definition

                      The information determined as a result of making the observation, if the information has a simple value.

                      ShortActual result
                      Comments

                      An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                      Control0..1
                      This element is affected by the following invariants: obs-7
                      BindingThe codes SHALL be taken from UnitsOfMeasureCaseSensitive
                      (required to http://terminology.hl7.org/ValueSet/v3-UnitsOfMeasureCaseSensitive)

                      This is the entire UCUM code set.

                      TypeQuantity
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      52. Observation.value[x]:valueCodeableConcept
                      Slice NamevalueCodeableConcept
                      Definition

                      The information determined as a result of making the observation, if the information has a simple value.

                      ShortActual result
                      Comments

                      The allowed set of codes will be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value.

                      Control0..1
                      This element is affected by the following invariants: obs-7
                      BindingThe codes SHOULD be taken from LOINCCodes
                      (preferred to http://hl7.org/fhir/ValueSet/observation-codes)

                      This value set includes all LOINC codes

                      Additional BindingsPurposeUsage
                      Digital Access Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-access
                      LOINCCodesPreferredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): digital-literacy
                      Less Than High School Education Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): educational-attainment
                      Elder Abuse Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): elder-abuse
                      Unemployment Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): employment-status
                      Financial Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): financial-insecurity
                      Food Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): food-insecurity
                      Health Insurance Coverage Status Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): health-insurance-coverage-status
                      Homelessness Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): homelessness
                      Housing Instability Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): housing-instability
                      VSAC 2.16.840.1.113762.1.4.1196.178 .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): inadequate-housing
                      Intimate Partner Violence Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): intimate-partner-violence
                      Material Hardship Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): material-hardship
                      Medical Cost Burden Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): medical-cost-burden
                      Health Literacy Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): personal-health-literacy
                      Social Connection Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): social-connection
                      Stress Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): stress
                      Transportation Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): transportation-insecurity
                      Utility Insecurity Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): utility-insecurity
                      Veteran Status Screening Assessments Answers .ExtensibleObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): veteran-status
                      LOINCCodesPreferredObservation.category (Details: SDOHCC-ObservationScreeningResponse code Observation.category = ' Observation.category ', stated as ' null '): sdoh-category-unspecified
                      TypeCodeableConcept
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      54. Observation.dataAbsentReason
                      Definition

                      Provides a reason why the expected value in the element Observation.value[x] is missing.

                      ShortWhy the result is missing
                      Comments

                      "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For a given LOINC question, if the LOINC answer list includes concepts such as 'unknown' or 'not available', they should be used for Observation.value. Where these concepts are not part of the value set for Observation.value, the Observation.dataAbsentReason can be used if necessary and appropriate.

                      Control0..1
                      This element is affected by the following invariants: obs-6
                      BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                      (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                      Codes specifying why the result (Observation.value[x]) is missing.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Requirements

                      For many results it is necessary to handle exceptional values in measurements.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      56. Observation.interpretation
                      Definition

                      A categorical assessment of an observation value. For example, high, low, normal.

                      ShortHigh, low, normal, etc.
                      Comments

                      Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                      Control0..*
                      BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                      (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                      Codes identifying interpretations of observations.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                      Alternate NamesAbnormal Flag
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      58. Observation.note
                      Definition

                      Comments about the observation or the results.

                      ShortComments about the observation
                      Comments

                      May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation.

                      Control0..*
                      TypeAnnotation
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Need to be able to provide free text additional information.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      60. Observation.bodySite
                      Definition

                      Indicates the site on the subject's body where the observation was made (i.e. the target site).

                      ShortObserved body part
                      Comments

                      Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

                      If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

                      Control0..0
                      BindingFor example codes, see SNOMEDCTBodyStructures
                      (example to http://hl7.org/fhir/ValueSet/body-site)

                      Codes describing anatomical locations. May include laterality.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      62. Observation.method
                      Definition

                      Indicates the mechanism used to perform the observation.

                      ShortHow it was done
                      Comments

                      Only used if not implicit in code for Observation.code.

                      Control0..1
                      BindingFor example codes, see ObservationMethods
                      (example to http://hl7.org/fhir/ValueSet/observation-methods)

                      Methods for simple observations.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      64. Observation.specimen
                      Definition

                      The specimen that was used when this observation was made.

                      ShortSpecimen used for this observation
                      Comments

                      Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

                      Control0..0
                      TypeReference(Specimen)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      66. Observation.device
                      Definition

                      The device used to generate the observation data.

                      Short(Measurement) Device
                      Comments

                      Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant.

                      Control0..1
                      TypeReference(Device, DeviceMetric)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      68. Observation.referenceRange
                      Definition

                      Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

                      ShortProvides guide for interpretation
                      Comments

                      Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
                      70. Observation.referenceRange.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      72. Observation.referenceRange.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      74. Observation.referenceRange.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      76. Observation.referenceRange.low
                      Definition

                      The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

                      ShortLow Range, if relevant
                      Control0..1
                      This element is affected by the following invariants: obs-3
                      TypeQuantity(SimpleQuantity)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      78. Observation.referenceRange.high
                      Definition

                      The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

                      ShortHigh Range, if relevant
                      Control0..1
                      This element is affected by the following invariants: obs-3
                      TypeQuantity(SimpleQuantity)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      80. Observation.referenceRange.type
                      Definition

                      Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

                      ShortReference range qualifier
                      Comments

                      This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

                      Control0..1
                      BindingThe codes SHOULD be taken from ObservationReferenceRangeMeaningCodes
                      (preferred to http://hl7.org/fhir/ValueSet/referencerange-meaning)

                      Code for the meaning of a reference range.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      82. Observation.referenceRange.appliesTo
                      Definition

                      Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

                      ShortReference range population
                      Comments

                      This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

                      Control0..*
                      BindingFor example codes, see ObservationReferenceRangeAppliesToCodes
                      (example to http://hl7.org/fhir/ValueSet/referencerange-appliesto)

                      Codes identifying the population the reference range applies to.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Need to be able to identify the target population for proper interpretation.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      84. Observation.referenceRange.age
                      Definition

                      The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

                      ShortApplicable age range, if relevant
                      Control0..1
                      TypeRange
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Some analytes vary greatly over age.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      86. Observation.referenceRange.text
                      Definition

                      Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals".

                      ShortText based reference range in an observation
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      88. Observation.hasMember
                      Definition

                      References the child observations of a grouping observation.

                      ShortReferences the child observations of a grouping observation
                      Comments

                      When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

                      Control0..*
                      TypeReference(Observation, QuestionnaireResponse, MolecularSequence)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      SlicingThis element introduces a set of slices on Observation.hasMember. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • profile @ $this.resolve()
                      • 90. Observation.hasMember:SupportedHasMember
                        Slice NameSupportedHasMember
                        Definition

                        This is the set of child observations that are expected to be supported by SDOH implementations.

                        ShortFor an Observation Grouping, the Observations generated from an assessment instrument
                        Comments

                        Other types of observations or resources can still be sent, but SDOH systems aren't required to pay attention to them.

                        Control0..*
                        TypeReference(SDOHCC Observation Screening Response)
                        Is Modifierfalse
                        Must Supporttrue
                        Summarytrue
                        Requirements

                        Provides context to the child observations of "in what instrument/panel was this information collected", which is critical in situations where the child observations do not have derivedFrom relationships to a QuestionnaireResponse.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        92. Observation.derivedFrom
                        Definition

                        The target resource represents a QuestionnaireResponse or other Observation from which the value of this Observation was inferred or calculated.

                        ShortRelated measurements the observation is made from
                        Comments

                        All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value.

                        Control0..*
                        TypeReference(DocumentReference, QuestionnaireResponse, Observation)
                        Is Modifierfalse
                        Must Supporttrue
                        Must Support TypesNo must-support rules about the choice of types/profiles
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Observation.derivedFrom. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • profile @ $this.resolve()
                        • 94. Observation.derivedFrom:SupportedDerivedFrom
                          Slice NameSupportedDerivedFrom
                          Definition

                          The types of 'derivedFrom' resources that must be supported by implementations conforming to this IG

                          ShortRelated questionnaire responses or observations that the observation is made from
                          Comments

                          Additional derivation targets (as supported by the underlying Observation resource) are allowed, but there is no expectation that implementers of this IG will pay attention to them.

                          Control0..*
                          TypeReference(SDOHCC Observation Screening Response, SDC Questionnaire Response)
                          Is Modifierfalse
                          Must Supporttrue
                          Must Support TypesNo must-support rules about the choice of types/profiles
                          Summarytrue
                          Requirements

                          Allows traceability (and context) for Observations derived from a QuestionnaireResponse and also establishes links for observations that were calculated or inferred based on other Observations (e.g. for calculated scores).

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          96. Observation.component
                          Definition

                          Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

                          ShortComponent results
                          Comments

                          For a discussion on the ways Observations can be assembled in groups together see Notes below.

                          Control0..*
                          TypeBackboneElement
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          98. Observation.component.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          100. Observation.component.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          102. Observation.component.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          104. Observation.component.code
                          Definition

                          Describes what was observed. Sometimes this is called the observation "code".

                          ShortType of component observation (code / type)
                          Comments

                          All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                          Control1..1
                          BindingFor example codes, see LOINCCodes
                          (example to http://hl7.org/fhir/ValueSet/observation-codes)

                          Codes identifying names of simple observations.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Knowing what kind of observation is being made is essential to understanding the observation.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          106. Observation.component.value[x]
                          Definition

                          The information determined as a result of making the observation, if the information has a simple value.

                          ShortActual component result
                          Comments

                          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                          Control0..1
                          TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          108. Observation.component.dataAbsentReason
                          Definition

                          Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                          ShortWhy the component result is missing
                          Comments

                          "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                          The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                          Control0..1
                          This element is affected by the following invariants: obs-6
                          BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                          (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

                          Codes specifying why the result (Observation.value[x]) is missing.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          For many results it is necessary to handle exceptional values in measurements.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          110. Observation.component.interpretation
                          Definition

                          A categorical assessment of an observation value. For example, high, low, normal.

                          ShortHigh, low, normal, etc.
                          Comments

                          Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                          Control0..*
                          BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                          (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

                          Codes identifying interpretations of observations.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                          Alternate NamesAbnormal Flag
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          112. Observation.component.referenceRange
                          Definition

                          Guidance on how to interpret the value by comparison to a normal or recommended range.

                          ShortProvides guide for interpretation of component result
                          Comments

                          Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                          Control0..*
                          TypeSeettp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))