This page is part of the SDOH Clinical Care for Multiple Domains (v1.0.0: STU 1) based on FHIR R4. The current version which supercedes this version is 2.0.0. For a full list of available versions, see the Directory of published versions
Definitions for the SDOHCC-Condition resource profile.
1. Condition | |
Definition | For representation of SDOH conditions. |
Control | 0..* |
Comments | Many of the SDOHCC profiles reference one another. One flow supported by this IG is that QuestionnaireResponses result in Observations that can be used as evidence for Conditions that can lead to Goals, ServiceRequests and Procedures. However, alternatives paths (e.g., to arrive at SDOH Conditions) are also possible. One specific use for this profile is to represent a Health Concern that is either; 1) directly asserted based on the patient’s answer to a specific question from an SDOH screening questionnaire or 2) computed/generated based on the patient’s answers to multiple questions. The questions and answers from the screening questionnaire are also represented using SDC Questionnaire, SDC QuestionnaireResponse and SDOHCC Screening Response Observation. |
Invariants | Defined on this element SDOH-Con-1: Can only have a max of one asserter. (: extension('http://hl7.org/fhir/4.5/StructureDefinition/extension-Condition.asserter').count()+asserter.count()<=1) con-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (: clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty()) con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (: abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists()) con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (: verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty()) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (: text.`div`.exists()) us-core-1: A code in Condition.category SHOULD be from US Core Condition Category Codes value set. (: where(category.memberOf('http://hl7.org/fhir/us/core/ValueSet/us-core-condition-category')).exists()) |
2. Condition.id | |
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
Control | 0..1 |
Type | string |
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. |
3. Condition.meta | |
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. |
Control | 0..1 |
Type | Meta |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
4. Condition.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
5. Condition.language | |
Definition | The base language in which the resource is written. |
Control | 0..1 |
Binding | The codes SHOULD be taken from CommonLanguages Max Binding: AllLanguages A human language. |
Type | code |
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
6. Condition.text | |
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. |
Control | 0..1 |
Type | Narrative |
Alternate Names | narrative, html, xhtml, display |
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
7. Condition.contained | |
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. |
Control | 0..* |
Type | Resource |
Alternate Names | inline resources, anonymous resources, contained resources |
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. |
8. Condition.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Condition.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
9. Condition.extension:AsserterDevice | |
SliceName | AsserterDevice |
Definition | An Extension |
Control | 0..1 This element is affected by the following invariants: ele-1, SDOH-Con-1 |
Type | Extension(Extension-4.5-Condition.asserter) (Extension Type: Reference(Practitioner | PractitionerRole | Patient | RelatedPerson | Device)) |
Must Support | true |
Requirements | For a condition that is autogenerated based on a computation that uses the patient’s answers to multiple questions on a SDOH questionnaire, this extension should be used to specify the device used to compute the condition. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
10. Condition.extension:AsserterDevice.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
11. Condition.extension:AsserterDevice.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Condition.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
12. Condition.extension:AsserterDevice.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/4.5/StructureDefinition/extension-Condition.asserter |
13. Condition.extension:AsserterDevice.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 0..1 |
Type | Reference(Device) |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
14. Condition.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
15. Condition.identifier | |
Definition | Business identifiers assigned to this condition by the performer or other systems which remain constant as the resource is updated and propagates from server to server. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Requirements | Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers. |
Comments | This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
16. Condition.clinicalStatus | |
Definition | The clinical status of the condition. |
Control | 0..1 This element is affected by the following invariants: con-3, con-4, con-5 |
Binding | The codes SHALL be taken from ConditionClinicalStatusCodes |
Type | CodeableConcept |
Is Modifier | true |
Must Support | true |
Comments | The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
17. Condition.verificationStatus | |
Definition | The verification status to support the clinical status of the condition. |
Control | 0..1 This element is affected by the following invariants: con-3, con-5 |
Binding | The codes SHALL be taken from ConditionVerificationStatus |
Type | CodeableConcept |
Is Modifier | true |
Must Support | true |
Comments | verificationStatus is not required. For example, when a patient complains of stress during a provider encounter, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity. For SDOH conditions that are autogenerated based on a questionnaire response, the Condition.asserter is a “Device” AND Condition.Category should be "health-concern". In that case, Condition.verificationStatus should be "unconfirmed" and should be changed to “confirmed” only after review and concurrence by the provider and patient. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
18. Condition.category | |
Definition | A category assigned to the condition. |
Control | 1..* This element is affected by the following invariants: us-core-1 |
Binding | The codes SHALL be taken from US Core Condition Category Codes; other codes may be used where these codes are not suitable |
Type | CodeableConcept |
Must Support | true |
Requirements | For a condition that is autogenerated based only on an individual's responses to an SDOH questionnaire, category should be "health-concern". |
Comments | The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Condition.category. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
19. Condition.category:SDOH | |
SliceName | SDOH |
Definition | A SDOH category assigned to the condition. |
Control | 0..* This element is affected by the following invariants: us-core-1 |
Binding | The codes SHALL be taken from SDOHCC ValueSet SDOH Category Codes for high-level SDOH categories. |
Type | CodeableConcept |
Must Support | true |
Requirements | Codes from this value set can be used to assign one or more SDOH categories (e.g., food-insecurity, transportation-insecurity, etc.) to a condition. It is recommended that SDOH category codes be used to facilitate searching for SDOH conditions. |
Comments | The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
20. Condition.severity | |
Definition | A subjective assessment of the severity of the condition as evaluated by the clinician. |
Control | 0..1 |
Binding | The codes SHOULD be taken from Condition/DiagnosisSeverity A subjective assessment of the severity of the condition as evaluated by the clinician. |
Type | CodeableConcept |
Comments | Coding of the severity with a terminology is preferred, where possible. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
21. Condition.code | |
Definition | Identification of the condition, problem or diagnosis. |
Control | 1..1 |
Binding | The codes SHALL be taken from Condition/Problem/DiagnosisCodes |
Type | CodeableConcept |
Must Support | true |
Requirements | Code is required and must be selected from the bound value set. |
Alternate Names | type |
Comments | As the Gravity Project continues to refine content for the SDOH categories (e.g., food, housing, transportation, etc.), this value set will be refined to codes that pertain to SDOH categories. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
22. Condition.code.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
23. Condition.code.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Condition.code.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
24. Condition.code.coding | |
Definition | A reference to a code defined by a terminology system. |
Control | 0..* |
Type | Coding |
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Condition.code.coding. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
25. Condition.code.coding:ICD-10Coding | |
SliceName | ICD-10Coding |
Definition | A reference to an ICD-10-CM code to document SDOH conditions |
Control | 0..1 |
Binding | The codes SHALL be taken from SDOHCC ValueSet ICD10CM ICD-10-CM codes |
Type | Coding |
Must Support | true |
Requirements | Allows for alternative encoding with an ICD-10 CM code. |
Comments | Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. As the Gravity Project continues to refine content for the SDOH categories (e.g., food, housing, transportation, etc.), this value set will be refined to codes that pertain to SDOH categories. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
26. Condition.code.text | |
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
Control | 0..1 |
Type | string |
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
Comments | Very often the text is the same as a displayName of one of the codings. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
27. Condition.bodySite | |
Definition | The anatomical location where this condition manifests itself. |
Control | 0..0 |
Binding | For example codes, see SNOMEDCTBodyStructures Codes describing anatomical locations. May include laterality. |
Type | CodeableConcept |
Comments | Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
28. Condition.subject | |
Definition | Indicates the patient who the condition record is associated with. |
Control | 1..1 |
Type | Reference(USCorePatientProfile) |
Must Support | true |
Requirements | US Core Condition Profile restricts subject to patient. |
Alternate Names | patient |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
29. Condition.encounter | |
Definition | The Encounter during which this Condition was created or to which the creation of this record is tightly associated. |
Control | 0..1 |
Type | Reference(Encounter) |
Comments | This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known". |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
30. Condition.onset[x] | |
Definition | Estimated or actual dateTime or Period the condition began. |
Control | 0..1 |
Type | Choice of: dateTime, Period |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Comments | For SDOH conditions that have their onset over an extended (or fuzzy) period (e.g., the past month), Condition.onset may use a lower precision representation (e.g., month/year or year) as opposed to a higher precision representation (e.g., year/month/date/hour/min). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
31. Condition.abatement[x] | |
Definition | The estimated or actual dateTime or Period that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution". |
Control | 0..1 This element is affected by the following invariants: con-4 |
Type | Choice of: dateTime, Period |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Comments | There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated. For SDOH Conditions that have a fuzzy abatement period, a lower precision representation (e.g., month/year or year) may be used. However, for SDOH Conditions that end at a specific point in time (e.g., food insecurity may abate upon acquiring a new job or gaining eligibility to a food program) a higher precision representation (e.g., year/month/date) may also be used. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
32. Condition.recordedDate | |
Definition | The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date. |
Control | 0..1 |
Type | dateTime |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
33. Condition.recorder | |
Definition | Individual who recorded the record and takes responsibility for its content. |
Control | 0..1 |
Type | Reference(Practitioner | PractitionerRole) |
Requirements | For a condition that is autogenerated based on a QuestionnaireResponse, the AsserterDevice extension should be used to specify the device used to compute the condition and recorder should be empty. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
34. Condition.asserter | |
Definition | The individual or device making the condition statement. |
Control | 0..1 This element is affected by the following invariants: SDOH-Con-1 |
Type | Reference(RelatedPerson | USCorePatientProfile | USCorePractitionerProfile | USCorePractitionerRoleProfile) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. For a condition that is autogenerated based on the patient directly answering a specific question from an SDOH screening questionnaire, the Condition.asserter should be the patient. For a condition that is autogenerated based on a computation that uses the patient’s answers to multiple questions, Condition.asserter should reference “Device” (using the using AsserterDevice extension) to specify the device used to compute the condition. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
35. Condition.stage | |
Definition | Clinical stage or grade of a condition. May include formal severity assessments. |
Control | 0..0 |
Type | BackboneElement |
Invariants | Defined on this element con-1: Stage SHALL have summary or assessment (: summary.exists() or assessment.exists()) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
36. Condition.stage.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
37. Condition.stage.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
38. Condition.stage.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
39. Condition.stage.summary | |
Definition | A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific. |
Control | 0..1 This element is affected by the following invariants: con-1 |
Binding | For example codes, see ConditionStage Codes describing condition stages (e.g. Cancer stages). |
Type | CodeableConcept |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
40. Condition.stage.assessment | |
Definition | Reference to a formal record of the evidence on which the staging assessment is based. |
Control | 0..* This element is affected by the following invariants: con-1 |
Type | Reference(ClinicalImpression | DiagnosticReport | Observation) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
41. Condition.stage.type | |
Definition | The kind of staging, such as pathological or clinical staging. |
Control | 0..1 |
Binding | For example codes, see ConditionStageType Codes describing the kind of condition staging (e.g. clinical or pathological). |
Type | CodeableConcept |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
42. Condition.evidence | |
Definition | Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition. |
Control | 0..* |
Type | BackboneElement |
Must Support | true |
Comments | The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both. |
Invariants | Defined on this element con-2: evidence SHALL have code or details (: code.exists() or detail.exists()) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
43. Condition.evidence.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
44. Condition.evidence.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
45. Condition.evidence.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
46. Condition.evidence.code | |
Definition | A manifestation or symptom that led to the recording of this condition. |
Control | 0..* This element is affected by the following invariants: con-2 |
Binding | For example codes, see ManifestationAndSymptomCodes Codes that describe the manifestation or symptoms of a condition. |
Type | CodeableConcept |
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. Information represented by Condition.evidence.code may overlap significantly with information represented by Condition.evidence.detail. Multiple approaches to representing the same information may negatively impact interoperability. Therefore, where similar infomation could be provided by either Condition.evidence.code or Condition.evidence.detail, it is recommended that Condition.evidence.detail should be used as supporting evidence for the condition. As the Gravity Project continues to refine content for the SDOH categories (e.g., food, housing, transportation, etc.), this value set may be refined to codes that pertain to SDOH categories. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
47. Condition.evidence.detail | |
Definition | Links to other relevant information, including pathology reports. |
Control | 0..* This element is affected by the following invariants: con-2 |
Type | Reference(Resource) |
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Additionally, see Comment for Condition.evidence.code. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Condition.evidence.detail. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
48. Condition.evidence.detail:SupportedDetail | |
SliceName | SupportedDetail |
Definition | Links to other relevant information. |
Control | 0..* This element is affected by the following invariants: con-2 |
Type | Reference(SDOHCCObservationScreeningResponse | SDOHCCCondition | SDOHCCObservationAssessment) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Requirements | When a condition is based on one or more SDOH observations that were generated from questionnaire responses, Condition.evidence.detail should reference instances that comply with the SDOHCC Screening Response Observation. However, references to other instance types are also possible. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
49. Condition.note | |
Definition | Additional information about the Condition. This is a general notes/comments entry for description of the Condition, its diagnosis and prognosis. |
Control | 0..* |
Type | Annotation |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |