Protocols for Clinical Registry Extraction and Data Submission (CREDS) IG
1.0.0-ballot - STU1 United States of America flag

This page is part of the Protocols for Clinical Registry Extraction and Data Submission (CREDS) IG (v1.0.0-ballot: STU1 Ballot 1) based on FHIR R4. . For a full list of available versions, see the Directory of published versions

Resource Profile: CapabilityStatementWithSlices - Detailed Descriptions

Draft as of 2023-03-29

Definitions for the CapabilityStatementWithSlices resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. CapabilityStatement
2. CapabilityStatement.rest
SlicingThis element introduces a set of slices on CapabilityStatement.rest. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ mode
3. CapabilityStatement.rest.resource
SlicingThis element introduces a set of slices on CapabilityStatement.rest.resource. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ type
4. CapabilityStatement.rest.resource:LocationSlice
SliceNameLocationSlice
Control0..1
5. CapabilityStatement.rest.resource:LocationSlice.type
Control0..?
Fixed ValueLocation
6. CapabilityStatement.rest.resource:OrganizationSlice
SliceNameOrganizationSlice
Control0..1
7. CapabilityStatement.rest.resource:OrganizationSlice.type
Control0..?
Fixed ValueOrganization
8. CapabilityStatement.rest.resource:MeasureSlice
SliceNameMeasureSlice
Control0..1
9. CapabilityStatement.rest.resource:MeasureSlice.type
Control0..?
Fixed ValueMeasure
10. CapabilityStatement.rest.resource:MeasureReportSlice
SliceNameMeasureReportSlice
Control0..1
11. CapabilityStatement.rest.resource:MeasureReportSlice.type
Control0..?
Fixed ValueMeasureReport
12. CapabilityStatement.rest.resource:QuestionnaireSlice
SliceNameQuestionnaireSlice
Control0..1
13. CapabilityStatement.rest.resource:QuestionnaireSlice.type
Control0..?
Fixed ValueQuestionnaire
14. CapabilityStatement.rest.resource:QuestionnaireResponseSlice
SliceNameQuestionnaireResponseSlice
Control0..1
15. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.type
Control0..?
Fixed ValueQuestionnaireResponse
16. CapabilityStatement.rest.resource:LibrarySlice
SliceNameLibrarySlice
Control0..*
17. CapabilityStatement.rest.resource:LibrarySlice.type
Control0..?
Fixed ValueLibrary
18. CapabilityStatement.rest.resource:ConceptMapSlice
SliceNameConceptMapSlice
Control0..*
19. CapabilityStatement.rest.resource:ConceptMapSlice.type
Control0..?
Fixed ValueConceptMap
20. CapabilityStatement.rest.resource:ValueSetSlice
SliceNameValueSetSlice
Control0..*
21. CapabilityStatement.rest.resource:ValueSetSlice.type
Control0..?
Fixed ValueValueSet
22. CapabilityStatement.rest.resource:CodeSystemSlice
SliceNameCodeSystemSlice
Control0..*
23. CapabilityStatement.rest.resource:CodeSystemSlice.type
Control0..?
Fixed ValueCodeSystem
24. CapabilityStatement.rest.resource:PatientSlice
SliceNamePatientSlice
Control0..*
25. CapabilityStatement.rest.resource:PatientSlice.type
Control0..?
Fixed ValuePatient
26. CapabilityStatement.rest.resource:AllergyIntoleranceSlice
SliceNameAllergyIntoleranceSlice
Control0..*
27. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.type
Control0..?
Fixed ValueAllergyIntolerance
28. CapabilityStatement.rest.resource:ConditionSlice
SliceNameConditionSlice
Control0..*
29. CapabilityStatement.rest.resource:ConditionSlice.type
Control0..?
Fixed ValueCondition
30. CapabilityStatement.rest.resource:DocumentReferenceSlice
SliceNameDocumentReferenceSlice
Control0..*
31. CapabilityStatement.rest.resource:DocumentReferenceSlice.type
Control0..?
Fixed ValueDocumentReference
32. CapabilityStatement.rest.resource:DiagnosticReportSlice
SliceNameDiagnosticReportSlice
Control0..*
33. CapabilityStatement.rest.resource:DiagnosticReportSlice.type
Control0..?
Fixed ValueDiagnosticReport
34. CapabilityStatement.rest.resource:EncounterSlice
SliceNameEncounterSlice
Control0..*
35. CapabilityStatement.rest.resource:EncounterSlice.type
Control0..?
Fixed ValueEncounter
36. CapabilityStatement.rest.resource:FamilyMemberHistorySlice
SliceNameFamilyMemberHistorySlice
Control0..*
37. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.type
Control0..?
Fixed ValueFamilyMemberHistory
38. CapabilityStatement.rest.resource:MedicationAdministrationSlice
SliceNameMedicationAdministrationSlice
Control0..*
39. CapabilityStatement.rest.resource:MedicationAdministrationSlice.type
Control0..?
Fixed ValueMedicationAdministration
40. CapabilityStatement.rest.resource:MedicationDispenseSlice
SliceNameMedicationDispenseSlice
Control0..*
41. CapabilityStatement.rest.resource:MedicationDispenseSlice.type
Control0..?
Fixed ValueMedicationDispense
42. CapabilityStatement.rest.resource:MedicationRequestSlice
SliceNameMedicationRequestSlice
Control0..*
43. CapabilityStatement.rest.resource:MedicationRequestSlice.type
Control0..?
Fixed ValueMedicationRequest
44. CapabilityStatement.rest.resource:MedicationStatementSlice
SliceNameMedicationStatementSlice
Control0..*
45. CapabilityStatement.rest.resource:MedicationStatementSlice.type
Control0..?
Fixed ValueMedicationStatement
46. CapabilityStatement.rest.resource:ObservationSlice
SliceNameObservationSlice
Control0..*
47. CapabilityStatement.rest.resource:ObservationSlice.type
Control0..?
Fixed ValueObservation
48. CapabilityStatement.rest.resource:ProcedureSlice
SliceNameProcedureSlice
Control0..*
49. CapabilityStatement.rest.resource:ProcedureSlice.type
Control0..?
Fixed ValueProcedure
50. CapabilityStatement.rest.resource:ServiceRequestSlice
SliceNameServiceRequestSlice
Control0..*
51. CapabilityStatement.rest.resource:ServiceRequestSlice.type
Control0..?
Fixed ValueServiceRequest
52. CapabilityStatement.rest.resource:ParametersSlice
SliceNameParametersSlice
Control0..*
53. CapabilityStatement.rest.resource:ParametersSlice.type
Control0..?
Fixed ValueParameters
54. CapabilityStatement.rest.resource:StructureDefinitionSlice
SliceNameStructureDefinitionSlice
Control0..*
55. CapabilityStatement.rest.resource:StructureDefinitionSlice.type
Control0..?
Fixed ValueStructureDefinition
56. CapabilityStatement.rest.resource:StructureMapSlice
SliceNameStructureMapSlice
Control0..*
57. CapabilityStatement.rest.resource:StructureMapSlice.type
Control0..?
Fixed ValueStructureMap
58. CapabilityStatement.rest:clientSlice
SliceNameclientSlice
Control0..1
59. CapabilityStatement.rest:clientSlice.mode
Control0..?
Fixed Valueclient
60. CapabilityStatement.rest:serverSlice
SliceNameserverSlice
Control0..1
61. CapabilityStatement.rest:serverSlice.mode
Control0..?
Fixed Valueserver

Guidance on how to interpret the contents of this table can be found here.

1. CapabilityStatement
Definition

A Capability Statement documents a set of capabilities (behaviors) of a FHIR Server for a particular version of FHIR that may be used as a statement of actual server functionality or a statement of required or desired server implementation.

Control0..*
Summaryfalse
Comments

Applications may implement multiple versions (see Managing Multiple Versions, and the $versions operation). If they do, then a CapabilityStatement describes the system's support for a particular version of FHIR, and the server will have multiple statements, one for each version.

InvariantsDefined on this element
cpb-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (: name.matches('[A-Z]([A-Za-z0-9_]){0,254}'))
cpb-1: A Capability Statement SHALL have at least one of REST, messaging or document element. (: rest.exists() or messaging.exists() or document.exists())
cpb-2: A Capability Statement SHALL have at least one of description, software, or implementation element. (: (description.count() + software.count() + implementation.count()) > 0)
cpb-3: Messaging end-point is required (and is only permitted) when a statement is for an implementation. (: messaging.endpoint.empty() or kind = 'instance')
cpb-7: The set of documents must be unique by the combination of profile and mode. (: document.select(profile&mode).isDistinct())
cpb-14: If kind = instance, implementation must be present and software may be present (: (kind != 'instance') or implementation.exists())
cpb-15: If kind = capability, implementation must be absent, software must be present (: (kind != 'capability') or (implementation.exists().not() and software.exists()))
cpb-16: If kind = requirements, implementation and software must be absent (: (kind!='requirements') or (implementation.exists().not() and software.exists().not()))
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. CapabilityStatement.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. CapabilityStatement.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. CapabilityStatement.status
Definition

The status of this capability statement. Enables tracking the life-cycle of the content.

Control1..1
BindingThe codes SHALL be taken from PublicationStatus

The lifecycle status of an artifact.

Typecode
Is Modifiertrue
Summarytrue
Comments

Allows filtering of capability statements that are appropriate for use versus not.This is not intended for use with actual capability statements, but where capability statements are used to describe possible or desired systems.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. CapabilityStatement.date
Definition

The date (and optionally time) when the capability statement was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the capability statement changes.

Control1..1
TypedateTime
Summarytrue
Alternate NamesRevision Date
Comments

Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the capability statement. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. CapabilityStatement.kind
Definition

The way that this statement is intended to be used, to describe an actual running instance of software, a particular product (kind, not instance of software) or a class of implementation (e.g. a desired purchase).

Control1..1 This element is affected by the following invariants: cpb-15
BindingThe codes SHALL be taken from CapabilityStatementKind

How a capability statement is intended to be used.

Typecode
Summarytrue
Requirements

Allow searching the 3 modes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. CapabilityStatement.implementation
Definition

Identifies a specific implementation instance that is described by the capability statement - i.e. a particular installation, rather than the capabilities of a software program.

Control0..1 This element is affected by the following invariants: cpb-2, cpb-15
TypeBackboneElement
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. CapabilityStatement.implementation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. CapabilityStatement.implementation.description
Definition

Information about the specific installation that this capability statement relates to.

Control1..1
Typestring
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. CapabilityStatement.fhirVersion
Definition

The version of the FHIR specification that this CapabilityStatement describes (which SHALL be the same as the FHIR version of the CapabilityStatement itself). There is no default value.

Control1..1
BindingThe codes SHALL be taken from FHIRVersion

All published FHIR Versions.

Typecode
Summarytrue
Comments

Servers may implement multiple versions (see Managing Multiple Versions, and the $versions operation). If they do, and the CapabilityStatement is requested from the server, then this fhirVersion will be either the version requested, or the server's default version.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. CapabilityStatement.format
Definition

A list of the formats supported by this implementation using their content types.

Control1..*
BindingThe codes SHALL be taken from Mime Types

The mime type of an attachment. Any valid mime type is allowed.

Typecode
Summarytrue
Comments

"xml", "json" and "ttl" are allowed, which describe the simple encodings described in the specification (and imply appropriate bundle support). Otherwise, mime types are legal here.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. CapabilityStatement.rest
Definition

A definition of the restful capabilities of the solution, if any.

Control0..* This element is affected by the following invariants: cpb-1
TypeBackboneElement
Summarytrue
Comments

Multiple repetitions allow definition of both client and/or server behaviors or possibly behaviors under different configuration settings (for software or requirements statements).

InvariantsDefined on this element
cpb-9: A given resource can only be described once per RESTful mode. (: resource.select(type).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on CapabilityStatement.rest. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ mode
13. CapabilityStatement.rest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
14. CapabilityStatement.rest.mode
Definition

Identifies whether this portion of the statement is describing the ability to initiate or receive restful operations.

Control1..1
BindingThe codes SHALL be taken from RestfulCapabilityMode

The mode of a RESTful capability statement.

Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. CapabilityStatement.rest.resource
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on CapabilityStatement.rest.resource. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ type
16. CapabilityStatement.rest.resource.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
17. CapabilityStatement.rest.resource.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. CapabilityStatement.rest.resource:LocationSlice
SliceNameLocationSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. CapabilityStatement.rest.resource:LocationSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
20. CapabilityStatement.rest.resource:LocationSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueLocation
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. CapabilityStatement.rest.resource:OrganizationSlice
SliceNameOrganizationSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. CapabilityStatement.rest.resource:OrganizationSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
23. CapabilityStatement.rest.resource:OrganizationSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueOrganization
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. CapabilityStatement.rest.resource:MeasureSlice
SliceNameMeasureSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. CapabilityStatement.rest.resource:MeasureSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
26. CapabilityStatement.rest.resource:MeasureSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueMeasure
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. CapabilityStatement.rest.resource:MeasureReportSlice
SliceNameMeasureReportSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. CapabilityStatement.rest.resource:MeasureReportSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
29. CapabilityStatement.rest.resource:MeasureReportSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueMeasureReport
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. CapabilityStatement.rest.resource:QuestionnaireSlice
SliceNameQuestionnaireSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. CapabilityStatement.rest.resource:QuestionnaireSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
32. CapabilityStatement.rest.resource:QuestionnaireSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueQuestionnaire
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. CapabilityStatement.rest.resource:QuestionnaireResponseSlice
SliceNameQuestionnaireResponseSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
35. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueQuestionnaireResponse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. CapabilityStatement.rest.resource:LibrarySlice
SliceNameLibrarySlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. CapabilityStatement.rest.resource:LibrarySlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
38. CapabilityStatement.rest.resource:LibrarySlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueLibrary
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. CapabilityStatement.rest.resource:ConceptMapSlice
SliceNameConceptMapSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. CapabilityStatement.rest.resource:ConceptMapSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
41. CapabilityStatement.rest.resource:ConceptMapSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueConceptMap
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. CapabilityStatement.rest.resource:ValueSetSlice
SliceNameValueSetSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. CapabilityStatement.rest.resource:ValueSetSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
44. CapabilityStatement.rest.resource:ValueSetSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueValueSet
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. CapabilityStatement.rest.resource:CodeSystemSlice
SliceNameCodeSystemSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. CapabilityStatement.rest.resource:CodeSystemSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
47. CapabilityStatement.rest.resource:CodeSystemSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueCodeSystem
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. CapabilityStatement.rest.resource:PatientSlice
SliceNamePatientSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. CapabilityStatement.rest.resource:PatientSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
50. CapabilityStatement.rest.resource:PatientSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValuePatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. CapabilityStatement.rest.resource:AllergyIntoleranceSlice
SliceNameAllergyIntoleranceSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
53. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueAllergyIntolerance
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
54. CapabilityStatement.rest.resource:ConditionSlice
SliceNameConditionSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
55. CapabilityStatement.rest.resource:ConditionSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
56. CapabilityStatement.rest.resource:ConditionSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueCondition
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
57. CapabilityStatement.rest.resource:DocumentReferenceSlice
SliceNameDocumentReferenceSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
58. CapabilityStatement.rest.resource:DocumentReferenceSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
59. CapabilityStatement.rest.resource:DocumentReferenceSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueDocumentReference
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
60. CapabilityStatement.rest.resource:DiagnosticReportSlice
SliceNameDiagnosticReportSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
61. CapabilityStatement.rest.resource:DiagnosticReportSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
62. CapabilityStatement.rest.resource:DiagnosticReportSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueDiagnosticReport
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
63. CapabilityStatement.rest.resource:EncounterSlice
SliceNameEncounterSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
64. CapabilityStatement.rest.resource:EncounterSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
65. CapabilityStatement.rest.resource:EncounterSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueEncounter
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
66. CapabilityStatement.rest.resource:FamilyMemberHistorySlice
SliceNameFamilyMemberHistorySlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
67. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
68. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueFamilyMemberHistory
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
69. CapabilityStatement.rest.resource:MedicationAdministrationSlice
SliceNameMedicationAdministrationSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
70. CapabilityStatement.rest.resource:MedicationAdministrationSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
71. CapabilityStatement.rest.resource:MedicationAdministrationSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueMedicationAdministration
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
72. CapabilityStatement.rest.resource:MedicationDispenseSlice
SliceNameMedicationDispenseSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
73. CapabilityStatement.rest.resource:MedicationDispenseSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
74. CapabilityStatement.rest.resource:MedicationDispenseSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueMedicationDispense
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
75. CapabilityStatement.rest.resource:MedicationRequestSlice
SliceNameMedicationRequestSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
76. CapabilityStatement.rest.resource:MedicationRequestSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
77. CapabilityStatement.rest.resource:MedicationRequestSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueMedicationRequest
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
78. CapabilityStatement.rest.resource:MedicationStatementSlice
SliceNameMedicationStatementSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
79. CapabilityStatement.rest.resource:MedicationStatementSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
80. CapabilityStatement.rest.resource:MedicationStatementSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueMedicationStatement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
81. CapabilityStatement.rest.resource:ObservationSlice
SliceNameObservationSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
82. CapabilityStatement.rest.resource:ObservationSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
83. CapabilityStatement.rest.resource:ObservationSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueObservation
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
84. CapabilityStatement.rest.resource:ProcedureSlice
SliceNameProcedureSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
85. CapabilityStatement.rest.resource:ProcedureSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
86. CapabilityStatement.rest.resource:ProcedureSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueProcedure
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
87. CapabilityStatement.rest.resource:ServiceRequestSlice
SliceNameServiceRequestSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
88. CapabilityStatement.rest.resource:ServiceRequestSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
89. CapabilityStatement.rest.resource:ServiceRequestSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueServiceRequest
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
90. CapabilityStatement.rest.resource:ParametersSlice
SliceNameParametersSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
91. CapabilityStatement.rest.resource:ParametersSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
92. CapabilityStatement.rest.resource:ParametersSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueParameters
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
93. CapabilityStatement.rest.resource:StructureDefinitionSlice
SliceNameStructureDefinitionSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
94. CapabilityStatement.rest.resource:StructureDefinitionSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
95. CapabilityStatement.rest.resource:StructureDefinitionSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueStructureDefinition
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
96. CapabilityStatement.rest.resource:StructureMapSlice
SliceNameStructureMapSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
97. CapabilityStatement.rest.resource:StructureMapSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
98. CapabilityStatement.rest.resource:StructureMapSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType

One of the resource types defined as part of this version of FHIR.

Typecode
Summarytrue
Fixed ValueStructureMap
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
99. CapabilityStatement.rest:clientSlice
SliceNameclientSlice
Definition

A definition of the restful capabilities of the solution, if any.

Control0..1* This element is affected by the following invariants: cpb-1
TypeBackboneElement
Summarytrue
Comments

Multiple repetitions allow definition of both client and/or server behaviors or possibly behaviors under different configuration settings (for software or requirements statements).

InvariantsDefined on this element
cpb-9: A given resource can only be described once per RESTful mode. (: resource.select(type).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
100. CapabilityStatement.rest:clientSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
101. CapabilityStatement.rest:clientSlice.mode
Definition

Identifies whether this portion of the statement is describing the ability to initiate or receive restful operations.

Control1..1
BindingThe codes SHALL be taken from RestfulCapabilityMode

The mode of a RESTful capability statement.

Typecode
Summarytrue
Fixed Valueclient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
102. CapabilityStatement.rest:serverSlice
SliceNameserverSlice
Definition

A definition of the restful capabilities of the solution, if any.

Control0..1* This element is affected by the following invariants: cpb-1
TypeBackboneElement
Summarytrue
Comments

Multiple repetitions allow definition of both client and/or server behaviors or possibly behaviors under different configuration settings (for software or requirements statements).

InvariantsDefined on this element
cpb-9: A given resource can only be described once per RESTful mode. (: resource.select(type).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
103. CapabilityStatement.rest:serverSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
104. CapabilityStatement.rest:serverSlice.mode
Definition

Identifies whether this portion of the statement is describing the ability to initiate or receive restful operations.

Control1..1
BindingThe codes SHALL be taken from RestfulCapabilityMode

The mode of a RESTful capability statement.

Typecode
Summarytrue
Fixed Valueserver
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. CapabilityStatement
Definition

A Capability Statement documents a set of capabilities (behaviors) of a FHIR Server for a particular version of FHIR that may be used as a statement of actual server functionality or a statement of required or desired server implementation.

Control0..*
Summaryfalse
Comments

Applications may implement multiple versions (see Managing Multiple Versions, and the $versions operation). If they do, then a CapabilityStatement describes the system's support for a particular version of FHIR, and the server will have multiple statements, one for each version.

2. CapabilityStatement.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. CapabilityStatement.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. CapabilityStatement.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. CapabilityStatement.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Summaryfalse
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. CapabilityStatement.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. CapabilityStatement.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. CapabilityStatement.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. CapabilityStatement.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. CapabilityStatement.url
Definition

An absolute URI that is used to identify this capability statement when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this capability statement is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the capability statement is stored on different servers.

Control0..1
Typeuri
Summarytrue
Requirements

Allows the capability statement to be referenced by a single globally unique identifier.

Comments

Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. CapabilityStatement.version
Definition

The identifier that is used to identify this version of the capability statement when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the capability statement author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Summarytrue
Comments

There may be different capability statement instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the capability statement with the format [url]|[version].

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. CapabilityStatement.name
Definition

A natural language name identifying the capability statement. This name should be usable as an identifier for the module by machine processing applications such as code generation.

Control0..1 This element is affected by the following invariants: inv-0
Typestring
Summarytrue
Requirements

Support human navigation and code generation.

Comments

The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. CapabilityStatement.title
Definition

A short, descriptive, user-friendly title for the capability statement.

Control0..1
Typestring
Summarytrue
Comments

This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. CapabilityStatement.status
Definition

The status of this capability statement. Enables tracking the life-cycle of the content.

Control1..1
BindingThe codes SHALL be taken from PublicationStatus The lifecycle status of an artifact
Typecode
Is Modifiertrue
Summarytrue
Comments

Allows filtering of capability statements that are appropriate for use versus not.This is not intended for use with actual capability statements, but where capability statements are used to describe possible or desired systems.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. CapabilityStatement.experimental
Definition

A Boolean value to indicate that this capability statement is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.

Control0..1
Typeboolean
Summarytrue
Requirements

Enables experimental content to be developed following the same lifecycle that would be used for a production-level capability statement.

Comments

Allows filtering of capability statements that are appropriate for use versus not.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. CapabilityStatement.date
Definition

The date (and optionally time) when the capability statement was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the capability statement changes.

Control1..1
TypedateTime
Summarytrue
Alternate NamesRevision Date
Comments

Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the capability statement. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. CapabilityStatement.publisher
Definition

The name of the organization or individual that published the capability statement.

Control0..1
Typestring
Summarytrue
Requirements

Helps establish the "authority/credibility" of the capability statement. May also allow for contact.

Comments

Usually an organization but may be an individual. The publisher (or steward) of the capability statement is the organization or individual primarily responsible for the maintenance and upkeep of the capability statement. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the capability statement. This item SHOULD be populated unless the information is available from context.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. CapabilityStatement.contact
Definition

Contact details to assist a user in finding and communicating with the publisher.

Control0..*
TypeContactDetail
Summarytrue
Comments

May be a web site, an email address, a telephone number, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. CapabilityStatement.description
Definition

A free text natural language description of the capability statement from a consumer's perspective. Typically, this is used when the capability statement describes a desired rather than an actual solution, for example as a formal expression of requirements as part of an RFP.

Control0..1 This element is affected by the following invariants: cpb-2
Typemarkdown
Summaryfalse
Comments

This description can be used to capture details such as why the capability statement was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the capability statement as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the capability statement is presumed to be the predominant language in the place the capability statement was created).This does not need to be populated if the description is adequately implied by the software or implementation details.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. CapabilityStatement.useContext
Definition

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate capability statement instances.

Control0..*
TypeUsageContext
Standards StatusTrial Use (from Normative)
Summarytrue
Requirements

Assist in searching for appropriate content.

Comments

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. CapabilityStatement.jurisdiction
Definition

A legal or geographic region in which the capability statement is intended to be used.

Control0..*
BindingThe codes SHALL be taken from Jurisdiction ValueSet; other codes may be used where these codes are not suitable Countries and regions within which this artifact is targeted for use
TypeCodeableConcept
Summarytrue
Comments

It may be possible for the capability statement to be used in jurisdictions other than those for which it was originally designed or intended.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. CapabilityStatement.purpose
Definition

Explanation of why this capability statement is needed and why it has been designed as it has.

Control0..1
Typemarkdown
Summaryfalse
Comments

This element does not describe the usage of the capability statement. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this capability statement.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. CapabilityStatement.copyright
Definition

A copyright statement relating to the capability statement and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the capability statement.

Control0..1
Typemarkdown
Summaryfalse
Requirements

Consumers must be able to determine any legal restrictions on the use of the capability statement and/or its content.

Alternate NamesLicense, Restrictions
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. CapabilityStatement.kind
Definition

The way that this statement is intended to be used, to describe an actual running instance of software, a particular product (kind, not instance of software) or a class of implementation (e.g. a desired purchase).

Control1..1 This element is affected by the following invariants: cpb-15
BindingThe codes SHALL be taken from CapabilityStatementKind How a capability statement is intended to be used
Typecode
Summarytrue
Requirements

Allow searching the 3 modes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. CapabilityStatement.instantiates
Definition

Reference to a canonical URL of another CapabilityStatement that this software implements. This capability statement is a published API description that corresponds to a business service. The server may actually implement a subset of the capability statement it claims to implement, so the capability statement must specify the full capability details.

Control0..*
Typecanonical(CapabilityStatement)
Summarytrue
Comments

HL7 defines the following Services: Terminology Service.

Many Implementation Guides define additional services.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. CapabilityStatement.imports
Definition

Reference to a canonical URL of another CapabilityStatement that this software adds to. The capability statement automatically includes everything in the other statement, and it is not duplicated, though the server may repeat the same resources, interactions and operations to add additional details to them.

Control0..*
Typecanonical(CapabilityStatement)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

the contents of any directly or indirectly imported CapabilityStatements SHALL NOT overlap, i.e. they cannot refer to the same rest/resource, operations/name, searchparam/name, interaction/code, messaging/endpoint, document/mode pair.

A capability statement that imports another CapabilityStatement automatically instantiates it too (though this is often not a very useful statement for the kinds of CapabilityStatements that are suitable for importing).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. CapabilityStatement.software
Definition

Software that is covered by this capability statement. It is used when the capability statement describes the capabilities of a particular software version, independent of an installation.

Control0..1 This element is affected by the following invariants: cpb-2
TypeBackboneElement
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. CapabilityStatement.software.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
29. CapabilityStatement.software.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
30. CapabilityStatement.software.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
31. CapabilityStatement.software.name
Definition

Name the software is known by.

Control1..1
Typestring
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
32. CapabilityStatement.software.version
Definition

The version identifier for the software covered by this statement.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Summarytrue
Comments

If possible, a version should be specified, as statements are likely to be different for different versions of software.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. CapabilityStatement.software.releaseDate
Definition

Date this version of the software was released.

Control0..1
TypedateTime
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. CapabilityStatement.implementation
Definition

Identifies a specific implementation instance that is described by the capability statement - i.e. a particular installation, rather than the capabilities of a software program.

Control0..1 This element is affected by the following invariants: cpb-2, cpb-15
TypeBackboneElement
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. CapabilityStatement.implementation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
36. CapabilityStatement.implementation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
37. CapabilityStatement.implementation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
38. CapabilityStatement.implementation.description
Definition

Information about the specific installation that this capability statement relates to.

Control1..1
Typestring
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. CapabilityStatement.implementation.url
Definition

An absolute base URL for the implementation. This forms the base for REST interfaces as well as the mailbox and document interfaces.

Control0..1
Typeurl
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. CapabilityStatement.implementation.custodian
Definition

The organization responsible for the management of the instance and oversight of the data on the server at the specified URL.

Control0..1
TypeReference(Organization)
Standards StatusTrial Use (from Normative)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
41. CapabilityStatement.fhirVersion
Definition

The version of the FHIR specification that this CapabilityStatement describes (which SHALL be the same as the FHIR version of the CapabilityStatement itself). There is no default value.

Control1..1
BindingThe codes SHALL be taken from FHIRVersion All published FHIR Versions
Typecode
Summarytrue
Comments

Servers may implement multiple versions (see Managing Multiple Versions, and the $versions operation). If they do, and the CapabilityStatement is requested from the server, then this fhirVersion will be either the version requested, or the server's default version.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. CapabilityStatement.format
Definition

A list of the formats supported by this implementation using their content types.

Control1..*
BindingThe codes SHALL be taken from Mime Types The mime type of an attachment. Any valid mime type is allowed
Typecode
Summarytrue
Comments

"xml", "json" and "ttl" are allowed, which describe the simple encodings described in the specification (and imply appropriate bundle support). Otherwise, mime types are legal here.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. CapabilityStatement.patchFormat
Definition

A list of the patch formats supported by this implementation using their content types.

Control0..*
BindingThe codes SHALL be taken from Mime Types The mime type of an attachment. Any valid mime type is allowed
Typecode
Summarytrue
Comments

At present, the patch mime types application/json-patch+json and application/xml-patch+xml are legal. Generally, if a server supports PATCH, it would be expected to support the patch formats and match the formats it supports, but this is not always possible or necessary.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
44. CapabilityStatement.implementationGuide
Definition

A list of implementation guides that the server does (or should) support in their entirety.

Control0..*
Typecanonical(ImplementationGuide)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. CapabilityStatement.rest
Definition

A definition of the restful capabilities of the solution, if any.

Control0..* This element is affected by the following invariants: cpb-1
TypeBackboneElement
Summarytrue
Comments

Multiple repetitions allow definition of both client and/or server behaviors or possibly behaviors under different configuration settings (for software or requirements statements).

InvariantsDefined on this element
cpb-9: A given resource can only be described once per RESTful mode. (: resource.select(type).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on CapabilityStatement.rest. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ mode
46. CapabilityStatement.rest.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
47. CapabilityStatement.rest.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
48. CapabilityStatement.rest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
49. CapabilityStatement.rest.mode
Definition

Identifies whether this portion of the statement is describing the ability to initiate or receive restful operations.

Control1..1
BindingThe codes SHALL be taken from RestfulCapabilityMode The mode of a RESTful capability statement
Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
50. CapabilityStatement.rest.documentation
Definition

Information about the system's restful capabilities that apply across all applications, such as security.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. CapabilityStatement.rest.security
Definition

Information about security implementation from an interface perspective - what a client needs to know.

Control0..1
TypeBackboneElement
Standards StatusTrial Use (from Normative)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. CapabilityStatement.rest.security.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
53. CapabilityStatement.rest.security.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
54. CapabilityStatement.rest.security.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
55. CapabilityStatement.rest.security.cors
Definition

Server adds CORS headers when responding to requests - this enables Javascript applications to use the server.

Control0..1
Typeboolean
Summarytrue
Comments

The easiest CORS headers to add are Access-Control-Allow-Origin: * & Access-Control-Request-Method: GET, POST, PUT, DELETE. All servers SHOULD support CORS.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
56. CapabilityStatement.rest.security.service
Definition

Types of security services that are supported/required by the system.

Control0..*
BindingThe codes SHALL be taken from RestfulSecurityService; other codes may be used where these codes are not suitable Types of security services used with FHIR
TypeCodeableConcept
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
57. CapabilityStatement.rest.security.description
Definition

General description of how security works.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
58. CapabilityStatement.rest.resource
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on CapabilityStatement.rest.resource. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ type
59. CapabilityStatement.rest.resource.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
60. CapabilityStatement.rest.resource.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
61. CapabilityStatement.rest.resource.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
62. CapabilityStatement.rest.resource.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
63. CapabilityStatement.rest.resource.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
64. CapabilityStatement.rest.resource.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
65. CapabilityStatement.rest.resource.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
66. CapabilityStatement.rest.resource.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
67. CapabilityStatement.rest.resource.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
68. CapabilityStatement.rest.resource.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
69. CapabilityStatement.rest.resource.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
70. CapabilityStatement.rest.resource.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
71. CapabilityStatement.rest.resource.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
72. CapabilityStatement.rest.resource.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
73. CapabilityStatement.rest.resource.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
74. CapabilityStatement.rest.resource.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
75. CapabilityStatement.rest.resource.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
76. CapabilityStatement.rest.resource.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
77. CapabilityStatement.rest.resource.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
78. CapabilityStatement.rest.resource.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
79. CapabilityStatement.rest.resource.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
80. CapabilityStatement.rest.resource.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
81. CapabilityStatement.rest.resource.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
82. CapabilityStatement.rest.resource.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
83. CapabilityStatement.rest.resource.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
84. CapabilityStatement.rest.resource.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
85. CapabilityStatement.rest.resource.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
86. CapabilityStatement.rest.resource.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
87. CapabilityStatement.rest.resource.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
88. CapabilityStatement.rest.resource.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
89. CapabilityStatement.rest.resource.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
90. CapabilityStatement.rest.resource.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
91. CapabilityStatement.rest.resource.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
92. CapabilityStatement.rest.resource.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
93. CapabilityStatement.rest.resource.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
94. CapabilityStatement.rest.resource.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
95. CapabilityStatement.rest.resource.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
96. CapabilityStatement.rest.resource.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
97. CapabilityStatement.rest.resource:LocationSlice
SliceNameLocationSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
98. CapabilityStatement.rest.resource:LocationSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
99. CapabilityStatement.rest.resource:LocationSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
100. CapabilityStatement.rest.resource:LocationSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
101. CapabilityStatement.rest.resource:LocationSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueLocation
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
102. CapabilityStatement.rest.resource:LocationSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
103. CapabilityStatement.rest.resource:LocationSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
104. CapabilityStatement.rest.resource:LocationSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
105. CapabilityStatement.rest.resource:LocationSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
106. CapabilityStatement.rest.resource:LocationSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
107. CapabilityStatement.rest.resource:LocationSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
108. CapabilityStatement.rest.resource:LocationSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
109. CapabilityStatement.rest.resource:LocationSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
110. CapabilityStatement.rest.resource:LocationSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
111. CapabilityStatement.rest.resource:LocationSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
112. CapabilityStatement.rest.resource:LocationSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
113. CapabilityStatement.rest.resource:LocationSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
114. CapabilityStatement.rest.resource:LocationSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
115. CapabilityStatement.rest.resource:LocationSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
116. CapabilityStatement.rest.resource:LocationSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
117. CapabilityStatement.rest.resource:LocationSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
118. CapabilityStatement.rest.resource:LocationSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
119. CapabilityStatement.rest.resource:LocationSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
120. CapabilityStatement.rest.resource:LocationSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
121. CapabilityStatement.rest.resource:LocationSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
122. CapabilityStatement.rest.resource:LocationSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
123. CapabilityStatement.rest.resource:LocationSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
124. CapabilityStatement.rest.resource:LocationSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
125. CapabilityStatement.rest.resource:LocationSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
126. CapabilityStatement.rest.resource:LocationSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
127. CapabilityStatement.rest.resource:LocationSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
128. CapabilityStatement.rest.resource:LocationSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
129. CapabilityStatement.rest.resource:LocationSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
130. CapabilityStatement.rest.resource:LocationSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
131. CapabilityStatement.rest.resource:LocationSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
132. CapabilityStatement.rest.resource:LocationSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
133. CapabilityStatement.rest.resource:LocationSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
134. CapabilityStatement.rest.resource:LocationSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
135. CapabilityStatement.rest.resource:LocationSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
136. CapabilityStatement.rest.resource:OrganizationSlice
SliceNameOrganizationSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
137. CapabilityStatement.rest.resource:OrganizationSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
138. CapabilityStatement.rest.resource:OrganizationSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
139. CapabilityStatement.rest.resource:OrganizationSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
140. CapabilityStatement.rest.resource:OrganizationSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueOrganization
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
141. CapabilityStatement.rest.resource:OrganizationSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
142. CapabilityStatement.rest.resource:OrganizationSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
143. CapabilityStatement.rest.resource:OrganizationSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
144. CapabilityStatement.rest.resource:OrganizationSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
145. CapabilityStatement.rest.resource:OrganizationSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
146. CapabilityStatement.rest.resource:OrganizationSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
147. CapabilityStatement.rest.resource:OrganizationSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
148. CapabilityStatement.rest.resource:OrganizationSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
149. CapabilityStatement.rest.resource:OrganizationSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
150. CapabilityStatement.rest.resource:OrganizationSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
151. CapabilityStatement.rest.resource:OrganizationSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
152. CapabilityStatement.rest.resource:OrganizationSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
153. CapabilityStatement.rest.resource:OrganizationSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
154. CapabilityStatement.rest.resource:OrganizationSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
155. CapabilityStatement.rest.resource:OrganizationSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
156. CapabilityStatement.rest.resource:OrganizationSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
157. CapabilityStatement.rest.resource:OrganizationSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
158. CapabilityStatement.rest.resource:OrganizationSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
159. CapabilityStatement.rest.resource:OrganizationSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
160. CapabilityStatement.rest.resource:OrganizationSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
161. CapabilityStatement.rest.resource:OrganizationSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
162. CapabilityStatement.rest.resource:OrganizationSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
163. CapabilityStatement.rest.resource:OrganizationSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
164. CapabilityStatement.rest.resource:OrganizationSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
165. CapabilityStatement.rest.resource:OrganizationSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
166. CapabilityStatement.rest.resource:OrganizationSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
167. CapabilityStatement.rest.resource:OrganizationSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
168. CapabilityStatement.rest.resource:OrganizationSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
169. CapabilityStatement.rest.resource:OrganizationSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
170. CapabilityStatement.rest.resource:OrganizationSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
171. CapabilityStatement.rest.resource:OrganizationSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
172. CapabilityStatement.rest.resource:OrganizationSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
173. CapabilityStatement.rest.resource:OrganizationSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
174. CapabilityStatement.rest.resource:OrganizationSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
175. CapabilityStatement.rest.resource:MeasureSlice
SliceNameMeasureSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
176. CapabilityStatement.rest.resource:MeasureSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
177. CapabilityStatement.rest.resource:MeasureSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
178. CapabilityStatement.rest.resource:MeasureSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
179. CapabilityStatement.rest.resource:MeasureSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueMeasure
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
180. CapabilityStatement.rest.resource:MeasureSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
181. CapabilityStatement.rest.resource:MeasureSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
182. CapabilityStatement.rest.resource:MeasureSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
183. CapabilityStatement.rest.resource:MeasureSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
184. CapabilityStatement.rest.resource:MeasureSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
185. CapabilityStatement.rest.resource:MeasureSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
186. CapabilityStatement.rest.resource:MeasureSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
187. CapabilityStatement.rest.resource:MeasureSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
188. CapabilityStatement.rest.resource:MeasureSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
189. CapabilityStatement.rest.resource:MeasureSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
190. CapabilityStatement.rest.resource:MeasureSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
191. CapabilityStatement.rest.resource:MeasureSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
192. CapabilityStatement.rest.resource:MeasureSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
193. CapabilityStatement.rest.resource:MeasureSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
194. CapabilityStatement.rest.resource:MeasureSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
195. CapabilityStatement.rest.resource:MeasureSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
196. CapabilityStatement.rest.resource:MeasureSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
197. CapabilityStatement.rest.resource:MeasureSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
198. CapabilityStatement.rest.resource:MeasureSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
199. CapabilityStatement.rest.resource:MeasureSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
200. CapabilityStatement.rest.resource:MeasureSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
201. CapabilityStatement.rest.resource:MeasureSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
202. CapabilityStatement.rest.resource:MeasureSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
203. CapabilityStatement.rest.resource:MeasureSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
204. CapabilityStatement.rest.resource:MeasureSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
205. CapabilityStatement.rest.resource:MeasureSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
206. CapabilityStatement.rest.resource:MeasureSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
207. CapabilityStatement.rest.resource:MeasureSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
208. CapabilityStatement.rest.resource:MeasureSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
209. CapabilityStatement.rest.resource:MeasureSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
210. CapabilityStatement.rest.resource:MeasureSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
211. CapabilityStatement.rest.resource:MeasureSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
212. CapabilityStatement.rest.resource:MeasureSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
213. CapabilityStatement.rest.resource:MeasureSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
214. CapabilityStatement.rest.resource:MeasureReportSlice
SliceNameMeasureReportSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
215. CapabilityStatement.rest.resource:MeasureReportSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
216. CapabilityStatement.rest.resource:MeasureReportSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
217. CapabilityStatement.rest.resource:MeasureReportSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
218. CapabilityStatement.rest.resource:MeasureReportSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueMeasureReport
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
219. CapabilityStatement.rest.resource:MeasureReportSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
220. CapabilityStatement.rest.resource:MeasureReportSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
221. CapabilityStatement.rest.resource:MeasureReportSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
222. CapabilityStatement.rest.resource:MeasureReportSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
223. CapabilityStatement.rest.resource:MeasureReportSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
224. CapabilityStatement.rest.resource:MeasureReportSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
225. CapabilityStatement.rest.resource:MeasureReportSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
226. CapabilityStatement.rest.resource:MeasureReportSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
227. CapabilityStatement.rest.resource:MeasureReportSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
228. CapabilityStatement.rest.resource:MeasureReportSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
229. CapabilityStatement.rest.resource:MeasureReportSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
230. CapabilityStatement.rest.resource:MeasureReportSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
231. CapabilityStatement.rest.resource:MeasureReportSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
232. CapabilityStatement.rest.resource:MeasureReportSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
233. CapabilityStatement.rest.resource:MeasureReportSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
234. CapabilityStatement.rest.resource:MeasureReportSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
235. CapabilityStatement.rest.resource:MeasureReportSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
236. CapabilityStatement.rest.resource:MeasureReportSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
237. CapabilityStatement.rest.resource:MeasureReportSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
238. CapabilityStatement.rest.resource:MeasureReportSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
239. CapabilityStatement.rest.resource:MeasureReportSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
240. CapabilityStatement.rest.resource:MeasureReportSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
241. CapabilityStatement.rest.resource:MeasureReportSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
242. CapabilityStatement.rest.resource:MeasureReportSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
243. CapabilityStatement.rest.resource:MeasureReportSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
244. CapabilityStatement.rest.resource:MeasureReportSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
245. CapabilityStatement.rest.resource:MeasureReportSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
246. CapabilityStatement.rest.resource:MeasureReportSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
247. CapabilityStatement.rest.resource:MeasureReportSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
248. CapabilityStatement.rest.resource:MeasureReportSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
249. CapabilityStatement.rest.resource:MeasureReportSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
250. CapabilityStatement.rest.resource:MeasureReportSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
251. CapabilityStatement.rest.resource:MeasureReportSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
252. CapabilityStatement.rest.resource:MeasureReportSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
253. CapabilityStatement.rest.resource:QuestionnaireSlice
SliceNameQuestionnaireSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
254. CapabilityStatement.rest.resource:QuestionnaireSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
255. CapabilityStatement.rest.resource:QuestionnaireSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
256. CapabilityStatement.rest.resource:QuestionnaireSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
257. CapabilityStatement.rest.resource:QuestionnaireSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueQuestionnaire
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
258. CapabilityStatement.rest.resource:QuestionnaireSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
259. CapabilityStatement.rest.resource:QuestionnaireSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
260. CapabilityStatement.rest.resource:QuestionnaireSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
261. CapabilityStatement.rest.resource:QuestionnaireSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
262. CapabilityStatement.rest.resource:QuestionnaireSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
263. CapabilityStatement.rest.resource:QuestionnaireSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
264. CapabilityStatement.rest.resource:QuestionnaireSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
265. CapabilityStatement.rest.resource:QuestionnaireSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
266. CapabilityStatement.rest.resource:QuestionnaireSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
267. CapabilityStatement.rest.resource:QuestionnaireSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
268. CapabilityStatement.rest.resource:QuestionnaireSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
269. CapabilityStatement.rest.resource:QuestionnaireSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
270. CapabilityStatement.rest.resource:QuestionnaireSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
271. CapabilityStatement.rest.resource:QuestionnaireSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
272. CapabilityStatement.rest.resource:QuestionnaireSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
273. CapabilityStatement.rest.resource:QuestionnaireSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
274. CapabilityStatement.rest.resource:QuestionnaireSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
275. CapabilityStatement.rest.resource:QuestionnaireSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
276. CapabilityStatement.rest.resource:QuestionnaireSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
277. CapabilityStatement.rest.resource:QuestionnaireSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
278. CapabilityStatement.rest.resource:QuestionnaireSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
279. CapabilityStatement.rest.resource:QuestionnaireSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
280. CapabilityStatement.rest.resource:QuestionnaireSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
281. CapabilityStatement.rest.resource:QuestionnaireSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
282. CapabilityStatement.rest.resource:QuestionnaireSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
283. CapabilityStatement.rest.resource:QuestionnaireSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
284. CapabilityStatement.rest.resource:QuestionnaireSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
285. CapabilityStatement.rest.resource:QuestionnaireSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
286. CapabilityStatement.rest.resource:QuestionnaireSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
287. CapabilityStatement.rest.resource:QuestionnaireSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
288. CapabilityStatement.rest.resource:QuestionnaireSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
289. CapabilityStatement.rest.resource:QuestionnaireSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
290. CapabilityStatement.rest.resource:QuestionnaireSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
291. CapabilityStatement.rest.resource:QuestionnaireSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
292. CapabilityStatement.rest.resource:QuestionnaireResponseSlice
SliceNameQuestionnaireResponseSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..1
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
293. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
294. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
295. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
296. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueQuestionnaireResponse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
297. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
298. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
299. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
300. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
301. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
302. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
303. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
304. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
305. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
306. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
307. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
308. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
309. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
310. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
311. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
312. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
313. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
314. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
315. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
316. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
317. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
318. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
319. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
320. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
321. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
322. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
323. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
324. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
325. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
326. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
327. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
328. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
329. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
330. CapabilityStatement.rest.resource:QuestionnaireResponseSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
331. CapabilityStatement.rest.resource:LibrarySlice
SliceNameLibrarySlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
332. CapabilityStatement.rest.resource:LibrarySlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
333. CapabilityStatement.rest.resource:LibrarySlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
334. CapabilityStatement.rest.resource:LibrarySlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
335. CapabilityStatement.rest.resource:LibrarySlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueLibrary
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
336. CapabilityStatement.rest.resource:LibrarySlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
337. CapabilityStatement.rest.resource:LibrarySlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
338. CapabilityStatement.rest.resource:LibrarySlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
339. CapabilityStatement.rest.resource:LibrarySlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
340. CapabilityStatement.rest.resource:LibrarySlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
341. CapabilityStatement.rest.resource:LibrarySlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
342. CapabilityStatement.rest.resource:LibrarySlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
343. CapabilityStatement.rest.resource:LibrarySlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
344. CapabilityStatement.rest.resource:LibrarySlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
345. CapabilityStatement.rest.resource:LibrarySlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
346. CapabilityStatement.rest.resource:LibrarySlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
347. CapabilityStatement.rest.resource:LibrarySlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
348. CapabilityStatement.rest.resource:LibrarySlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
349. CapabilityStatement.rest.resource:LibrarySlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
350. CapabilityStatement.rest.resource:LibrarySlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
351. CapabilityStatement.rest.resource:LibrarySlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
352. CapabilityStatement.rest.resource:LibrarySlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
353. CapabilityStatement.rest.resource:LibrarySlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
354. CapabilityStatement.rest.resource:LibrarySlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
355. CapabilityStatement.rest.resource:LibrarySlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
356. CapabilityStatement.rest.resource:LibrarySlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
357. CapabilityStatement.rest.resource:LibrarySlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
358. CapabilityStatement.rest.resource:LibrarySlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
359. CapabilityStatement.rest.resource:LibrarySlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
360. CapabilityStatement.rest.resource:LibrarySlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
361. CapabilityStatement.rest.resource:LibrarySlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
362. CapabilityStatement.rest.resource:LibrarySlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
363. CapabilityStatement.rest.resource:LibrarySlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
364. CapabilityStatement.rest.resource:LibrarySlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
365. CapabilityStatement.rest.resource:LibrarySlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
366. CapabilityStatement.rest.resource:LibrarySlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
367. CapabilityStatement.rest.resource:LibrarySlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
368. CapabilityStatement.rest.resource:LibrarySlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
369. CapabilityStatement.rest.resource:LibrarySlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
370. CapabilityStatement.rest.resource:ConceptMapSlice
SliceNameConceptMapSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
371. CapabilityStatement.rest.resource:ConceptMapSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
372. CapabilityStatement.rest.resource:ConceptMapSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
373. CapabilityStatement.rest.resource:ConceptMapSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
374. CapabilityStatement.rest.resource:ConceptMapSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueConceptMap
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
375. CapabilityStatement.rest.resource:ConceptMapSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
376. CapabilityStatement.rest.resource:ConceptMapSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
377. CapabilityStatement.rest.resource:ConceptMapSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
378. CapabilityStatement.rest.resource:ConceptMapSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
379. CapabilityStatement.rest.resource:ConceptMapSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
380. CapabilityStatement.rest.resource:ConceptMapSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
381. CapabilityStatement.rest.resource:ConceptMapSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
382. CapabilityStatement.rest.resource:ConceptMapSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
383. CapabilityStatement.rest.resource:ConceptMapSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
384. CapabilityStatement.rest.resource:ConceptMapSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
385. CapabilityStatement.rest.resource:ConceptMapSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
386. CapabilityStatement.rest.resource:ConceptMapSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
387. CapabilityStatement.rest.resource:ConceptMapSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
388. CapabilityStatement.rest.resource:ConceptMapSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
389. CapabilityStatement.rest.resource:ConceptMapSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
390. CapabilityStatement.rest.resource:ConceptMapSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
391. CapabilityStatement.rest.resource:ConceptMapSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
392. CapabilityStatement.rest.resource:ConceptMapSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
393. CapabilityStatement.rest.resource:ConceptMapSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
394. CapabilityStatement.rest.resource:ConceptMapSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
395. CapabilityStatement.rest.resource:ConceptMapSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
396. CapabilityStatement.rest.resource:ConceptMapSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
397. CapabilityStatement.rest.resource:ConceptMapSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
398. CapabilityStatement.rest.resource:ConceptMapSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
399. CapabilityStatement.rest.resource:ConceptMapSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
400. CapabilityStatement.rest.resource:ConceptMapSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
401. CapabilityStatement.rest.resource:ConceptMapSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
402. CapabilityStatement.rest.resource:ConceptMapSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
403. CapabilityStatement.rest.resource:ConceptMapSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
404. CapabilityStatement.rest.resource:ConceptMapSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
405. CapabilityStatement.rest.resource:ConceptMapSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
406. CapabilityStatement.rest.resource:ConceptMapSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
407. CapabilityStatement.rest.resource:ConceptMapSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
408. CapabilityStatement.rest.resource:ConceptMapSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
409. CapabilityStatement.rest.resource:ValueSetSlice
SliceNameValueSetSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
410. CapabilityStatement.rest.resource:ValueSetSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
411. CapabilityStatement.rest.resource:ValueSetSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
412. CapabilityStatement.rest.resource:ValueSetSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
413. CapabilityStatement.rest.resource:ValueSetSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueValueSet
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
414. CapabilityStatement.rest.resource:ValueSetSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
415. CapabilityStatement.rest.resource:ValueSetSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
416. CapabilityStatement.rest.resource:ValueSetSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
417. CapabilityStatement.rest.resource:ValueSetSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
418. CapabilityStatement.rest.resource:ValueSetSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
419. CapabilityStatement.rest.resource:ValueSetSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
420. CapabilityStatement.rest.resource:ValueSetSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
421. CapabilityStatement.rest.resource:ValueSetSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
422. CapabilityStatement.rest.resource:ValueSetSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
423. CapabilityStatement.rest.resource:ValueSetSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
424. CapabilityStatement.rest.resource:ValueSetSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
425. CapabilityStatement.rest.resource:ValueSetSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
426. CapabilityStatement.rest.resource:ValueSetSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
427. CapabilityStatement.rest.resource:ValueSetSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
428. CapabilityStatement.rest.resource:ValueSetSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
429. CapabilityStatement.rest.resource:ValueSetSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
430. CapabilityStatement.rest.resource:ValueSetSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
431. CapabilityStatement.rest.resource:ValueSetSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
432. CapabilityStatement.rest.resource:ValueSetSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
433. CapabilityStatement.rest.resource:ValueSetSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
434. CapabilityStatement.rest.resource:ValueSetSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
435. CapabilityStatement.rest.resource:ValueSetSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
436. CapabilityStatement.rest.resource:ValueSetSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
437. CapabilityStatement.rest.resource:ValueSetSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
438. CapabilityStatement.rest.resource:ValueSetSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
439. CapabilityStatement.rest.resource:ValueSetSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
440. CapabilityStatement.rest.resource:ValueSetSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
441. CapabilityStatement.rest.resource:ValueSetSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
442. CapabilityStatement.rest.resource:ValueSetSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
443. CapabilityStatement.rest.resource:ValueSetSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
444. CapabilityStatement.rest.resource:ValueSetSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
445. CapabilityStatement.rest.resource:ValueSetSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
446. CapabilityStatement.rest.resource:ValueSetSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
447. CapabilityStatement.rest.resource:ValueSetSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
448. CapabilityStatement.rest.resource:CodeSystemSlice
SliceNameCodeSystemSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
449. CapabilityStatement.rest.resource:CodeSystemSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
450. CapabilityStatement.rest.resource:CodeSystemSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
451. CapabilityStatement.rest.resource:CodeSystemSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
452. CapabilityStatement.rest.resource:CodeSystemSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueCodeSystem
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
453. CapabilityStatement.rest.resource:CodeSystemSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
454. CapabilityStatement.rest.resource:CodeSystemSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
455. CapabilityStatement.rest.resource:CodeSystemSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
456. CapabilityStatement.rest.resource:CodeSystemSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
457. CapabilityStatement.rest.resource:CodeSystemSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
458. CapabilityStatement.rest.resource:CodeSystemSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
459. CapabilityStatement.rest.resource:CodeSystemSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
460. CapabilityStatement.rest.resource:CodeSystemSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
461. CapabilityStatement.rest.resource:CodeSystemSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
462. CapabilityStatement.rest.resource:CodeSystemSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
463. CapabilityStatement.rest.resource:CodeSystemSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
464. CapabilityStatement.rest.resource:CodeSystemSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
465. CapabilityStatement.rest.resource:CodeSystemSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
466. CapabilityStatement.rest.resource:CodeSystemSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
467. CapabilityStatement.rest.resource:CodeSystemSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
468. CapabilityStatement.rest.resource:CodeSystemSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
469. CapabilityStatement.rest.resource:CodeSystemSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
470. CapabilityStatement.rest.resource:CodeSystemSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
471. CapabilityStatement.rest.resource:CodeSystemSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
472. CapabilityStatement.rest.resource:CodeSystemSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
473. CapabilityStatement.rest.resource:CodeSystemSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
474. CapabilityStatement.rest.resource:CodeSystemSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
475. CapabilityStatement.rest.resource:CodeSystemSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
476. CapabilityStatement.rest.resource:CodeSystemSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
477. CapabilityStatement.rest.resource:CodeSystemSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
478. CapabilityStatement.rest.resource:CodeSystemSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
479. CapabilityStatement.rest.resource:CodeSystemSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
480. CapabilityStatement.rest.resource:CodeSystemSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
481. CapabilityStatement.rest.resource:CodeSystemSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
482. CapabilityStatement.rest.resource:CodeSystemSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
483. CapabilityStatement.rest.resource:CodeSystemSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
484. CapabilityStatement.rest.resource:CodeSystemSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
485. CapabilityStatement.rest.resource:CodeSystemSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
486. CapabilityStatement.rest.resource:CodeSystemSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
487. CapabilityStatement.rest.resource:PatientSlice
SliceNamePatientSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
488. CapabilityStatement.rest.resource:PatientSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
489. CapabilityStatement.rest.resource:PatientSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
490. CapabilityStatement.rest.resource:PatientSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
491. CapabilityStatement.rest.resource:PatientSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValuePatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
492. CapabilityStatement.rest.resource:PatientSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
493. CapabilityStatement.rest.resource:PatientSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
494. CapabilityStatement.rest.resource:PatientSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
495. CapabilityStatement.rest.resource:PatientSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
496. CapabilityStatement.rest.resource:PatientSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
497. CapabilityStatement.rest.resource:PatientSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
498. CapabilityStatement.rest.resource:PatientSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
499. CapabilityStatement.rest.resource:PatientSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
500. CapabilityStatement.rest.resource:PatientSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
501. CapabilityStatement.rest.resource:PatientSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
502. CapabilityStatement.rest.resource:PatientSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
503. CapabilityStatement.rest.resource:PatientSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
504. CapabilityStatement.rest.resource:PatientSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
505. CapabilityStatement.rest.resource:PatientSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
506. CapabilityStatement.rest.resource:PatientSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
507. CapabilityStatement.rest.resource:PatientSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
508. CapabilityStatement.rest.resource:PatientSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
509. CapabilityStatement.rest.resource:PatientSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
510. CapabilityStatement.rest.resource:PatientSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
511. CapabilityStatement.rest.resource:PatientSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
512. CapabilityStatement.rest.resource:PatientSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
513. CapabilityStatement.rest.resource:PatientSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
514. CapabilityStatement.rest.resource:PatientSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
515. CapabilityStatement.rest.resource:PatientSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
516. CapabilityStatement.rest.resource:PatientSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
517. CapabilityStatement.rest.resource:PatientSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
518. CapabilityStatement.rest.resource:PatientSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
519. CapabilityStatement.rest.resource:PatientSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
520. CapabilityStatement.rest.resource:PatientSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
521. CapabilityStatement.rest.resource:PatientSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
522. CapabilityStatement.rest.resource:PatientSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
523. CapabilityStatement.rest.resource:PatientSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
524. CapabilityStatement.rest.resource:PatientSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
525. CapabilityStatement.rest.resource:PatientSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
526. CapabilityStatement.rest.resource:AllergyIntoleranceSlice
SliceNameAllergyIntoleranceSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
527. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
528. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
529. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
530. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueAllergyIntolerance
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
531. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
532. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
533. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
534. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
535. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
536. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
537. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
538. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
539. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
540. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
541. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
542. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
543. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
544. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
545. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
546. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
547. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
548. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
549. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
550. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
551. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
552. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
553. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
554. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
555. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
556. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
557. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
558. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
559. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
560. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
561. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
562. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
563. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
564. CapabilityStatement.rest.resource:AllergyIntoleranceSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
565. CapabilityStatement.rest.resource:ConditionSlice
SliceNameConditionSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
566. CapabilityStatement.rest.resource:ConditionSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
567. CapabilityStatement.rest.resource:ConditionSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
568. CapabilityStatement.rest.resource:ConditionSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
569. CapabilityStatement.rest.resource:ConditionSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueCondition
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
570. CapabilityStatement.rest.resource:ConditionSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
571. CapabilityStatement.rest.resource:ConditionSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
572. CapabilityStatement.rest.resource:ConditionSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
573. CapabilityStatement.rest.resource:ConditionSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
574. CapabilityStatement.rest.resource:ConditionSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
575. CapabilityStatement.rest.resource:ConditionSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
576. CapabilityStatement.rest.resource:ConditionSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
577. CapabilityStatement.rest.resource:ConditionSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
578. CapabilityStatement.rest.resource:ConditionSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
579. CapabilityStatement.rest.resource:ConditionSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
580. CapabilityStatement.rest.resource:ConditionSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
581. CapabilityStatement.rest.resource:ConditionSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
582. CapabilityStatement.rest.resource:ConditionSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
583. CapabilityStatement.rest.resource:ConditionSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
584. CapabilityStatement.rest.resource:ConditionSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
585. CapabilityStatement.rest.resource:ConditionSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
586. CapabilityStatement.rest.resource:ConditionSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
587. CapabilityStatement.rest.resource:ConditionSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
588. CapabilityStatement.rest.resource:ConditionSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
589. CapabilityStatement.rest.resource:ConditionSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
590. CapabilityStatement.rest.resource:ConditionSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
591. CapabilityStatement.rest.resource:ConditionSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
592. CapabilityStatement.rest.resource:ConditionSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
593. CapabilityStatement.rest.resource:ConditionSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
594. CapabilityStatement.rest.resource:ConditionSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
595. CapabilityStatement.rest.resource:ConditionSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
596. CapabilityStatement.rest.resource:ConditionSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
597. CapabilityStatement.rest.resource:ConditionSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
598. CapabilityStatement.rest.resource:ConditionSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
599. CapabilityStatement.rest.resource:ConditionSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
600. CapabilityStatement.rest.resource:ConditionSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
601. CapabilityStatement.rest.resource:ConditionSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
602. CapabilityStatement.rest.resource:ConditionSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
603. CapabilityStatement.rest.resource:ConditionSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
604. CapabilityStatement.rest.resource:DocumentReferenceSlice
SliceNameDocumentReferenceSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
605. CapabilityStatement.rest.resource:DocumentReferenceSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
606. CapabilityStatement.rest.resource:DocumentReferenceSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
607. CapabilityStatement.rest.resource:DocumentReferenceSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
608. CapabilityStatement.rest.resource:DocumentReferenceSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueDocumentReference
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
609. CapabilityStatement.rest.resource:DocumentReferenceSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
610. CapabilityStatement.rest.resource:DocumentReferenceSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
611. CapabilityStatement.rest.resource:DocumentReferenceSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
612. CapabilityStatement.rest.resource:DocumentReferenceSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
613. CapabilityStatement.rest.resource:DocumentReferenceSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
614. CapabilityStatement.rest.resource:DocumentReferenceSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
615. CapabilityStatement.rest.resource:DocumentReferenceSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
616. CapabilityStatement.rest.resource:DocumentReferenceSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
617. CapabilityStatement.rest.resource:DocumentReferenceSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
618. CapabilityStatement.rest.resource:DocumentReferenceSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
619. CapabilityStatement.rest.resource:DocumentReferenceSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
620. CapabilityStatement.rest.resource:DocumentReferenceSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
621. CapabilityStatement.rest.resource:DocumentReferenceSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
622. CapabilityStatement.rest.resource:DocumentReferenceSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
623. CapabilityStatement.rest.resource:DocumentReferenceSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
624. CapabilityStatement.rest.resource:DocumentReferenceSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
625. CapabilityStatement.rest.resource:DocumentReferenceSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
626. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
627. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
628. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
629. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
630. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
631. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
632. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
633. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
634. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
635. CapabilityStatement.rest.resource:DocumentReferenceSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
636. CapabilityStatement.rest.resource:DocumentReferenceSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
637. CapabilityStatement.rest.resource:DocumentReferenceSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
638. CapabilityStatement.rest.resource:DocumentReferenceSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
639. CapabilityStatement.rest.resource:DocumentReferenceSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
640. CapabilityStatement.rest.resource:DocumentReferenceSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
641. CapabilityStatement.rest.resource:DocumentReferenceSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
642. CapabilityStatement.rest.resource:DocumentReferenceSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
643. CapabilityStatement.rest.resource:DiagnosticReportSlice
SliceNameDiagnosticReportSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
644. CapabilityStatement.rest.resource:DiagnosticReportSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
645. CapabilityStatement.rest.resource:DiagnosticReportSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
646. CapabilityStatement.rest.resource:DiagnosticReportSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
647. CapabilityStatement.rest.resource:DiagnosticReportSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueDiagnosticReport
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
648. CapabilityStatement.rest.resource:DiagnosticReportSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
649. CapabilityStatement.rest.resource:DiagnosticReportSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
650. CapabilityStatement.rest.resource:DiagnosticReportSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
651. CapabilityStatement.rest.resource:DiagnosticReportSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
652. CapabilityStatement.rest.resource:DiagnosticReportSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
653. CapabilityStatement.rest.resource:DiagnosticReportSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
654. CapabilityStatement.rest.resource:DiagnosticReportSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
655. CapabilityStatement.rest.resource:DiagnosticReportSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
656. CapabilityStatement.rest.resource:DiagnosticReportSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
657. CapabilityStatement.rest.resource:DiagnosticReportSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
658. CapabilityStatement.rest.resource:DiagnosticReportSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
659. CapabilityStatement.rest.resource:DiagnosticReportSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
660. CapabilityStatement.rest.resource:DiagnosticReportSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
661. CapabilityStatement.rest.resource:DiagnosticReportSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
662. CapabilityStatement.rest.resource:DiagnosticReportSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
663. CapabilityStatement.rest.resource:DiagnosticReportSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
664. CapabilityStatement.rest.resource:DiagnosticReportSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
665. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
666. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
667. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
668. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
669. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
670. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
671. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
672. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
673. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
674. CapabilityStatement.rest.resource:DiagnosticReportSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
675. CapabilityStatement.rest.resource:DiagnosticReportSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
676. CapabilityStatement.rest.resource:DiagnosticReportSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
677. CapabilityStatement.rest.resource:DiagnosticReportSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
678. CapabilityStatement.rest.resource:DiagnosticReportSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
679. CapabilityStatement.rest.resource:DiagnosticReportSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
680. CapabilityStatement.rest.resource:DiagnosticReportSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
681. CapabilityStatement.rest.resource:DiagnosticReportSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
682. CapabilityStatement.rest.resource:EncounterSlice
SliceNameEncounterSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
683. CapabilityStatement.rest.resource:EncounterSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
684. CapabilityStatement.rest.resource:EncounterSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
685. CapabilityStatement.rest.resource:EncounterSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
686. CapabilityStatement.rest.resource:EncounterSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueEncounter
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
687. CapabilityStatement.rest.resource:EncounterSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
688. CapabilityStatement.rest.resource:EncounterSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
689. CapabilityStatement.rest.resource:EncounterSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
690. CapabilityStatement.rest.resource:EncounterSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
691. CapabilityStatement.rest.resource:EncounterSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
692. CapabilityStatement.rest.resource:EncounterSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
693. CapabilityStatement.rest.resource:EncounterSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
694. CapabilityStatement.rest.resource:EncounterSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
695. CapabilityStatement.rest.resource:EncounterSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
696. CapabilityStatement.rest.resource:EncounterSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
697. CapabilityStatement.rest.resource:EncounterSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
698. CapabilityStatement.rest.resource:EncounterSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
699. CapabilityStatement.rest.resource:EncounterSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
700. CapabilityStatement.rest.resource:EncounterSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
701. CapabilityStatement.rest.resource:EncounterSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
702. CapabilityStatement.rest.resource:EncounterSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
703. CapabilityStatement.rest.resource:EncounterSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
704. CapabilityStatement.rest.resource:EncounterSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
705. CapabilityStatement.rest.resource:EncounterSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
706. CapabilityStatement.rest.resource:EncounterSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
707. CapabilityStatement.rest.resource:EncounterSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
708. CapabilityStatement.rest.resource:EncounterSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
709. CapabilityStatement.rest.resource:EncounterSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
710. CapabilityStatement.rest.resource:EncounterSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
711. CapabilityStatement.rest.resource:EncounterSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
712. CapabilityStatement.rest.resource:EncounterSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
713. CapabilityStatement.rest.resource:EncounterSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
714. CapabilityStatement.rest.resource:EncounterSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
715. CapabilityStatement.rest.resource:EncounterSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
716. CapabilityStatement.rest.resource:EncounterSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
717. CapabilityStatement.rest.resource:EncounterSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
718. CapabilityStatement.rest.resource:EncounterSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
719. CapabilityStatement.rest.resource:EncounterSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
720. CapabilityStatement.rest.resource:EncounterSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
721. CapabilityStatement.rest.resource:FamilyMemberHistorySlice
SliceNameFamilyMemberHistorySlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
722. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
723. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
724. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
725. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueFamilyMemberHistory
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
726. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
727. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
728. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
729. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
730. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
731. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
732. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
733. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
734. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
735. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
736. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
737. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
738. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
739. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
740. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
741. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
742. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
743. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
744. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
745. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
746. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
747. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
748. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
749. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
750. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
751. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
752. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
753. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
754. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
755. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
756. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
757. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
758. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
759. CapabilityStatement.rest.resource:FamilyMemberHistorySlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
760. CapabilityStatement.rest.resource:MedicationAdministrationSlice
SliceNameMedicationAdministrationSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
761. CapabilityStatement.rest.resource:MedicationAdministrationSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
762. CapabilityStatement.rest.resource:MedicationAdministrationSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
763. CapabilityStatement.rest.resource:MedicationAdministrationSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
764. CapabilityStatement.rest.resource:MedicationAdministrationSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueMedicationAdministration
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
765. CapabilityStatement.rest.resource:MedicationAdministrationSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
766. CapabilityStatement.rest.resource:MedicationAdministrationSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
767. CapabilityStatement.rest.resource:MedicationAdministrationSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
768. CapabilityStatement.rest.resource:MedicationAdministrationSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
769. CapabilityStatement.rest.resource:MedicationAdministrationSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
770. CapabilityStatement.rest.resource:MedicationAdministrationSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
771. CapabilityStatement.rest.resource:MedicationAdministrationSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
772. CapabilityStatement.rest.resource:MedicationAdministrationSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
773. CapabilityStatement.rest.resource:MedicationAdministrationSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
774. CapabilityStatement.rest.resource:MedicationAdministrationSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
775. CapabilityStatement.rest.resource:MedicationAdministrationSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
776. CapabilityStatement.rest.resource:MedicationAdministrationSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
777. CapabilityStatement.rest.resource:MedicationAdministrationSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
778. CapabilityStatement.rest.resource:MedicationAdministrationSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
779. CapabilityStatement.rest.resource:MedicationAdministrationSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
780. CapabilityStatement.rest.resource:MedicationAdministrationSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
781. CapabilityStatement.rest.resource:MedicationAdministrationSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
782. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
783. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
784. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
785. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
786. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
787. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
788. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
789. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
790. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
791. CapabilityStatement.rest.resource:MedicationAdministrationSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
792. CapabilityStatement.rest.resource:MedicationAdministrationSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
793. CapabilityStatement.rest.resource:MedicationAdministrationSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
794. CapabilityStatement.rest.resource:MedicationAdministrationSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
795. CapabilityStatement.rest.resource:MedicationAdministrationSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
796. CapabilityStatement.rest.resource:MedicationAdministrationSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
797. CapabilityStatement.rest.resource:MedicationAdministrationSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
798. CapabilityStatement.rest.resource:MedicationAdministrationSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
799. CapabilityStatement.rest.resource:MedicationDispenseSlice
SliceNameMedicationDispenseSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
800. CapabilityStatement.rest.resource:MedicationDispenseSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
801. CapabilityStatement.rest.resource:MedicationDispenseSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
802. CapabilityStatement.rest.resource:MedicationDispenseSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
803. CapabilityStatement.rest.resource:MedicationDispenseSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueMedicationDispense
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
804. CapabilityStatement.rest.resource:MedicationDispenseSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
805. CapabilityStatement.rest.resource:MedicationDispenseSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
806. CapabilityStatement.rest.resource:MedicationDispenseSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
807. CapabilityStatement.rest.resource:MedicationDispenseSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
808. CapabilityStatement.rest.resource:MedicationDispenseSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
809. CapabilityStatement.rest.resource:MedicationDispenseSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
810. CapabilityStatement.rest.resource:MedicationDispenseSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
811. CapabilityStatement.rest.resource:MedicationDispenseSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
812. CapabilityStatement.rest.resource:MedicationDispenseSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
813. CapabilityStatement.rest.resource:MedicationDispenseSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
814. CapabilityStatement.rest.resource:MedicationDispenseSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
815. CapabilityStatement.rest.resource:MedicationDispenseSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
816. CapabilityStatement.rest.resource:MedicationDispenseSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
817. CapabilityStatement.rest.resource:MedicationDispenseSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
818. CapabilityStatement.rest.resource:MedicationDispenseSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
819. CapabilityStatement.rest.resource:MedicationDispenseSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
820. CapabilityStatement.rest.resource:MedicationDispenseSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
821. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
822. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
823. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
824. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
825. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
826. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
827. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
828. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
829. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
830. CapabilityStatement.rest.resource:MedicationDispenseSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
831. CapabilityStatement.rest.resource:MedicationDispenseSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
832. CapabilityStatement.rest.resource:MedicationDispenseSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
833. CapabilityStatement.rest.resource:MedicationDispenseSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
834. CapabilityStatement.rest.resource:MedicationDispenseSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
835. CapabilityStatement.rest.resource:MedicationDispenseSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
836. CapabilityStatement.rest.resource:MedicationDispenseSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
837. CapabilityStatement.rest.resource:MedicationDispenseSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
838. CapabilityStatement.rest.resource:MedicationRequestSlice
SliceNameMedicationRequestSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
839. CapabilityStatement.rest.resource:MedicationRequestSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
840. CapabilityStatement.rest.resource:MedicationRequestSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
841. CapabilityStatement.rest.resource:MedicationRequestSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
842. CapabilityStatement.rest.resource:MedicationRequestSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueMedicationRequest
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
843. CapabilityStatement.rest.resource:MedicationRequestSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
844. CapabilityStatement.rest.resource:MedicationRequestSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
845. CapabilityStatement.rest.resource:MedicationRequestSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
846. CapabilityStatement.rest.resource:MedicationRequestSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
847. CapabilityStatement.rest.resource:MedicationRequestSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
848. CapabilityStatement.rest.resource:MedicationRequestSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
849. CapabilityStatement.rest.resource:MedicationRequestSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
850. CapabilityStatement.rest.resource:MedicationRequestSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
851. CapabilityStatement.rest.resource:MedicationRequestSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
852. CapabilityStatement.rest.resource:MedicationRequestSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
853. CapabilityStatement.rest.resource:MedicationRequestSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
854. CapabilityStatement.rest.resource:MedicationRequestSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
855. CapabilityStatement.rest.resource:MedicationRequestSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
856. CapabilityStatement.rest.resource:MedicationRequestSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
857. CapabilityStatement.rest.resource:MedicationRequestSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
858. CapabilityStatement.rest.resource:MedicationRequestSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
859. CapabilityStatement.rest.resource:MedicationRequestSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
860. CapabilityStatement.rest.resource:MedicationRequestSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
861. CapabilityStatement.rest.resource:MedicationRequestSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
862. CapabilityStatement.rest.resource:MedicationRequestSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
863. CapabilityStatement.rest.resource:MedicationRequestSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
864. CapabilityStatement.rest.resource:MedicationRequestSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
865. CapabilityStatement.rest.resource:MedicationRequestSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
866. CapabilityStatement.rest.resource:MedicationRequestSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
867. CapabilityStatement.rest.resource:MedicationRequestSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
868. CapabilityStatement.rest.resource:MedicationRequestSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
869. CapabilityStatement.rest.resource:MedicationRequestSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
870. CapabilityStatement.rest.resource:MedicationRequestSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
871. CapabilityStatement.rest.resource:MedicationRequestSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
872. CapabilityStatement.rest.resource:MedicationRequestSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
873. CapabilityStatement.rest.resource:MedicationRequestSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
874. CapabilityStatement.rest.resource:MedicationRequestSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
875. CapabilityStatement.rest.resource:MedicationRequestSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
876. CapabilityStatement.rest.resource:MedicationRequestSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
877. CapabilityStatement.rest.resource:MedicationStatementSlice
SliceNameMedicationStatementSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
878. CapabilityStatement.rest.resource:MedicationStatementSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
879. CapabilityStatement.rest.resource:MedicationStatementSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
880. CapabilityStatement.rest.resource:MedicationStatementSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
881. CapabilityStatement.rest.resource:MedicationStatementSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueMedicationStatement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
882. CapabilityStatement.rest.resource:MedicationStatementSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
883. CapabilityStatement.rest.resource:MedicationStatementSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
884. CapabilityStatement.rest.resource:MedicationStatementSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
885. CapabilityStatement.rest.resource:MedicationStatementSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
886. CapabilityStatement.rest.resource:MedicationStatementSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
887. CapabilityStatement.rest.resource:MedicationStatementSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
888. CapabilityStatement.rest.resource:MedicationStatementSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
889. CapabilityStatement.rest.resource:MedicationStatementSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
890. CapabilityStatement.rest.resource:MedicationStatementSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
891. CapabilityStatement.rest.resource:MedicationStatementSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
892. CapabilityStatement.rest.resource:MedicationStatementSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
893. CapabilityStatement.rest.resource:MedicationStatementSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
894. CapabilityStatement.rest.resource:MedicationStatementSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
895. CapabilityStatement.rest.resource:MedicationStatementSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
896. CapabilityStatement.rest.resource:MedicationStatementSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
897. CapabilityStatement.rest.resource:MedicationStatementSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
898. CapabilityStatement.rest.resource:MedicationStatementSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
899. CapabilityStatement.rest.resource:MedicationStatementSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
900. CapabilityStatement.rest.resource:MedicationStatementSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
901. CapabilityStatement.rest.resource:MedicationStatementSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
902. CapabilityStatement.rest.resource:MedicationStatementSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
903. CapabilityStatement.rest.resource:MedicationStatementSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
904. CapabilityStatement.rest.resource:MedicationStatementSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
905. CapabilityStatement.rest.resource:MedicationStatementSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
906. CapabilityStatement.rest.resource:MedicationStatementSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
907. CapabilityStatement.rest.resource:MedicationStatementSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
908. CapabilityStatement.rest.resource:MedicationStatementSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
909. CapabilityStatement.rest.resource:MedicationStatementSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
910. CapabilityStatement.rest.resource:MedicationStatementSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
911. CapabilityStatement.rest.resource:MedicationStatementSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
912. CapabilityStatement.rest.resource:MedicationStatementSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
913. CapabilityStatement.rest.resource:MedicationStatementSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
914. CapabilityStatement.rest.resource:MedicationStatementSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
915. CapabilityStatement.rest.resource:MedicationStatementSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
916. CapabilityStatement.rest.resource:ObservationSlice
SliceNameObservationSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
917. CapabilityStatement.rest.resource:ObservationSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
918. CapabilityStatement.rest.resource:ObservationSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
919. CapabilityStatement.rest.resource:ObservationSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
920. CapabilityStatement.rest.resource:ObservationSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueObservation
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
921. CapabilityStatement.rest.resource:ObservationSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
922. CapabilityStatement.rest.resource:ObservationSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
923. CapabilityStatement.rest.resource:ObservationSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
924. CapabilityStatement.rest.resource:ObservationSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
925. CapabilityStatement.rest.resource:ObservationSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
926. CapabilityStatement.rest.resource:ObservationSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
927. CapabilityStatement.rest.resource:ObservationSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
928. CapabilityStatement.rest.resource:ObservationSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
929. CapabilityStatement.rest.resource:ObservationSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
930. CapabilityStatement.rest.resource:ObservationSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
931. CapabilityStatement.rest.resource:ObservationSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
932. CapabilityStatement.rest.resource:ObservationSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
933. CapabilityStatement.rest.resource:ObservationSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
934. CapabilityStatement.rest.resource:ObservationSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
935. CapabilityStatement.rest.resource:ObservationSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
936. CapabilityStatement.rest.resource:ObservationSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
937. CapabilityStatement.rest.resource:ObservationSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
938. CapabilityStatement.rest.resource:ObservationSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
939. CapabilityStatement.rest.resource:ObservationSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
940. CapabilityStatement.rest.resource:ObservationSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
941. CapabilityStatement.rest.resource:ObservationSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
942. CapabilityStatement.rest.resource:ObservationSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
943. CapabilityStatement.rest.resource:ObservationSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
944. CapabilityStatement.rest.resource:ObservationSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
945. CapabilityStatement.rest.resource:ObservationSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
946. CapabilityStatement.rest.resource:ObservationSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
947. CapabilityStatement.rest.resource:ObservationSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
948. CapabilityStatement.rest.resource:ObservationSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
949. CapabilityStatement.rest.resource:ObservationSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
950. CapabilityStatement.rest.resource:ObservationSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
951. CapabilityStatement.rest.resource:ObservationSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
952. CapabilityStatement.rest.resource:ObservationSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
953. CapabilityStatement.rest.resource:ObservationSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
954. CapabilityStatement.rest.resource:ObservationSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
955. CapabilityStatement.rest.resource:ProcedureSlice
SliceNameProcedureSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
956. CapabilityStatement.rest.resource:ProcedureSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
957. CapabilityStatement.rest.resource:ProcedureSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
958. CapabilityStatement.rest.resource:ProcedureSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
959. CapabilityStatement.rest.resource:ProcedureSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueProcedure
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
960. CapabilityStatement.rest.resource:ProcedureSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
961. CapabilityStatement.rest.resource:ProcedureSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
962. CapabilityStatement.rest.resource:ProcedureSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
963. CapabilityStatement.rest.resource:ProcedureSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
964. CapabilityStatement.rest.resource:ProcedureSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
965. CapabilityStatement.rest.resource:ProcedureSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
966. CapabilityStatement.rest.resource:ProcedureSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
967. CapabilityStatement.rest.resource:ProcedureSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
968. CapabilityStatement.rest.resource:ProcedureSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
969. CapabilityStatement.rest.resource:ProcedureSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
970. CapabilityStatement.rest.resource:ProcedureSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
971. CapabilityStatement.rest.resource:ProcedureSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
972. CapabilityStatement.rest.resource:ProcedureSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
973. CapabilityStatement.rest.resource:ProcedureSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
974. CapabilityStatement.rest.resource:ProcedureSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
975. CapabilityStatement.rest.resource:ProcedureSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
976. CapabilityStatement.rest.resource:ProcedureSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
977. CapabilityStatement.rest.resource:ProcedureSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
978. CapabilityStatement.rest.resource:ProcedureSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
979. CapabilityStatement.rest.resource:ProcedureSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
980. CapabilityStatement.rest.resource:ProcedureSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
981. CapabilityStatement.rest.resource:ProcedureSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
982. CapabilityStatement.rest.resource:ProcedureSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
983. CapabilityStatement.rest.resource:ProcedureSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
984. CapabilityStatement.rest.resource:ProcedureSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
985. CapabilityStatement.rest.resource:ProcedureSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
986. CapabilityStatement.rest.resource:ProcedureSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
987. CapabilityStatement.rest.resource:ProcedureSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
988. CapabilityStatement.rest.resource:ProcedureSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
989. CapabilityStatement.rest.resource:ProcedureSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
990. CapabilityStatement.rest.resource:ProcedureSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
991. CapabilityStatement.rest.resource:ProcedureSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
992. CapabilityStatement.rest.resource:ProcedureSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
993. CapabilityStatement.rest.resource:ProcedureSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
994. CapabilityStatement.rest.resource:ServiceRequestSlice
SliceNameServiceRequestSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
995. CapabilityStatement.rest.resource:ServiceRequestSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
996. CapabilityStatement.rest.resource:ServiceRequestSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
997. CapabilityStatement.rest.resource:ServiceRequestSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
998. CapabilityStatement.rest.resource:ServiceRequestSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueServiceRequest
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
999. CapabilityStatement.rest.resource:ServiceRequestSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1000. CapabilityStatement.rest.resource:ServiceRequestSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1001. CapabilityStatement.rest.resource:ServiceRequestSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1002. CapabilityStatement.rest.resource:ServiceRequestSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1003. CapabilityStatement.rest.resource:ServiceRequestSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1004. CapabilityStatement.rest.resource:ServiceRequestSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1005. CapabilityStatement.rest.resource:ServiceRequestSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1006. CapabilityStatement.rest.resource:ServiceRequestSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1007. CapabilityStatement.rest.resource:ServiceRequestSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1008. CapabilityStatement.rest.resource:ServiceRequestSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1009. CapabilityStatement.rest.resource:ServiceRequestSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1010. CapabilityStatement.rest.resource:ServiceRequestSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1011. CapabilityStatement.rest.resource:ServiceRequestSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1012. CapabilityStatement.rest.resource:ServiceRequestSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1013. CapabilityStatement.rest.resource:ServiceRequestSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1014. CapabilityStatement.rest.resource:ServiceRequestSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1015. CapabilityStatement.rest.resource:ServiceRequestSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1016. CapabilityStatement.rest.resource:ServiceRequestSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1017. CapabilityStatement.rest.resource:ServiceRequestSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1018. CapabilityStatement.rest.resource:ServiceRequestSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1019. CapabilityStatement.rest.resource:ServiceRequestSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1020. CapabilityStatement.rest.resource:ServiceRequestSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1021. CapabilityStatement.rest.resource:ServiceRequestSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1022. CapabilityStatement.rest.resource:ServiceRequestSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1023. CapabilityStatement.rest.resource:ServiceRequestSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1024. CapabilityStatement.rest.resource:ServiceRequestSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1025. CapabilityStatement.rest.resource:ServiceRequestSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1026. CapabilityStatement.rest.resource:ServiceRequestSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1027. CapabilityStatement.rest.resource:ServiceRequestSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1028. CapabilityStatement.rest.resource:ServiceRequestSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1029. CapabilityStatement.rest.resource:ServiceRequestSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1030. CapabilityStatement.rest.resource:ServiceRequestSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1031. CapabilityStatement.rest.resource:ServiceRequestSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1032. CapabilityStatement.rest.resource:ServiceRequestSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1033. CapabilityStatement.rest.resource:ParametersSlice
SliceNameParametersSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1034. CapabilityStatement.rest.resource:ParametersSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1035. CapabilityStatement.rest.resource:ParametersSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1036. CapabilityStatement.rest.resource:ParametersSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1037. CapabilityStatement.rest.resource:ParametersSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueParameters
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1038. CapabilityStatement.rest.resource:ParametersSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1039. CapabilityStatement.rest.resource:ParametersSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1040. CapabilityStatement.rest.resource:ParametersSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1041. CapabilityStatement.rest.resource:ParametersSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1042. CapabilityStatement.rest.resource:ParametersSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1043. CapabilityStatement.rest.resource:ParametersSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1044. CapabilityStatement.rest.resource:ParametersSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1045. CapabilityStatement.rest.resource:ParametersSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1046. CapabilityStatement.rest.resource:ParametersSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1047. CapabilityStatement.rest.resource:ParametersSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1048. CapabilityStatement.rest.resource:ParametersSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1049. CapabilityStatement.rest.resource:ParametersSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1050. CapabilityStatement.rest.resource:ParametersSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1051. CapabilityStatement.rest.resource:ParametersSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1052. CapabilityStatement.rest.resource:ParametersSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1053. CapabilityStatement.rest.resource:ParametersSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1054. CapabilityStatement.rest.resource:ParametersSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1055. CapabilityStatement.rest.resource:ParametersSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1056. CapabilityStatement.rest.resource:ParametersSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1057. CapabilityStatement.rest.resource:ParametersSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1058. CapabilityStatement.rest.resource:ParametersSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1059. CapabilityStatement.rest.resource:ParametersSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1060. CapabilityStatement.rest.resource:ParametersSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1061. CapabilityStatement.rest.resource:ParametersSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1062. CapabilityStatement.rest.resource:ParametersSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1063. CapabilityStatement.rest.resource:ParametersSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1064. CapabilityStatement.rest.resource:ParametersSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1065. CapabilityStatement.rest.resource:ParametersSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1066. CapabilityStatement.rest.resource:ParametersSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1067. CapabilityStatement.rest.resource:ParametersSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1068. CapabilityStatement.rest.resource:ParametersSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1069. CapabilityStatement.rest.resource:ParametersSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1070. CapabilityStatement.rest.resource:ParametersSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1071. CapabilityStatement.rest.resource:ParametersSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1072. CapabilityStatement.rest.resource:StructureDefinitionSlice
SliceNameStructureDefinitionSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1073. CapabilityStatement.rest.resource:StructureDefinitionSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1074. CapabilityStatement.rest.resource:StructureDefinitionSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1075. CapabilityStatement.rest.resource:StructureDefinitionSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1076. CapabilityStatement.rest.resource:StructureDefinitionSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueStructureDefinition
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1077. CapabilityStatement.rest.resource:StructureDefinitionSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1078. CapabilityStatement.rest.resource:StructureDefinitionSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1079. CapabilityStatement.rest.resource:StructureDefinitionSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1080. CapabilityStatement.rest.resource:StructureDefinitionSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1081. CapabilityStatement.rest.resource:StructureDefinitionSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1082. CapabilityStatement.rest.resource:StructureDefinitionSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1083. CapabilityStatement.rest.resource:StructureDefinitionSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1084. CapabilityStatement.rest.resource:StructureDefinitionSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1085. CapabilityStatement.rest.resource:StructureDefinitionSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1086. CapabilityStatement.rest.resource:StructureDefinitionSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1087. CapabilityStatement.rest.resource:StructureDefinitionSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1088. CapabilityStatement.rest.resource:StructureDefinitionSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1089. CapabilityStatement.rest.resource:StructureDefinitionSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1090. CapabilityStatement.rest.resource:StructureDefinitionSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1091. CapabilityStatement.rest.resource:StructureDefinitionSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1092. CapabilityStatement.rest.resource:StructureDefinitionSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1093. CapabilityStatement.rest.resource:StructureDefinitionSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1094. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1095. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1096. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1097. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1098. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1099. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1100. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1101. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1102. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1103. CapabilityStatement.rest.resource:StructureDefinitionSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1104. CapabilityStatement.rest.resource:StructureDefinitionSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1105. CapabilityStatement.rest.resource:StructureDefinitionSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1106. CapabilityStatement.rest.resource:StructureDefinitionSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1107. CapabilityStatement.rest.resource:StructureDefinitionSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1108. CapabilityStatement.rest.resource:StructureDefinitionSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1109. CapabilityStatement.rest.resource:StructureDefinitionSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1110. CapabilityStatement.rest.resource:StructureDefinitionSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1111. CapabilityStatement.rest.resource:StructureMapSlice
SliceNameStructureMapSlice
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1112. CapabilityStatement.rest.resource:StructureMapSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1113. CapabilityStatement.rest.resource:StructureMapSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1114. CapabilityStatement.rest.resource:StructureMapSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1115. CapabilityStatement.rest.resource:StructureMapSlice.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
Fixed ValueStructureMap
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1116. CapabilityStatement.rest.resource:StructureMapSlice.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1117. CapabilityStatement.rest.resource:StructureMapSlice.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1118. CapabilityStatement.rest.resource:StructureMapSlice.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1119. CapabilityStatement.rest.resource:StructureMapSlice.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1120. CapabilityStatement.rest.resource:StructureMapSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1121. CapabilityStatement.rest.resource:StructureMapSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1122. CapabilityStatement.rest.resource:StructureMapSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1123. CapabilityStatement.rest.resource:StructureMapSlice.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1124. CapabilityStatement.rest.resource:StructureMapSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1125. CapabilityStatement.rest.resource:StructureMapSlice.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1126. CapabilityStatement.rest.resource:StructureMapSlice.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1127. CapabilityStatement.rest.resource:StructureMapSlice.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1128. CapabilityStatement.rest.resource:StructureMapSlice.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1129. CapabilityStatement.rest.resource:StructureMapSlice.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1130. CapabilityStatement.rest.resource:StructureMapSlice.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1131. CapabilityStatement.rest.resource:StructureMapSlice.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1132. CapabilityStatement.rest.resource:StructureMapSlice.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1133. CapabilityStatement.rest.resource:StructureMapSlice.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1134. CapabilityStatement.rest.resource:StructureMapSlice.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1135. CapabilityStatement.rest.resource:StructureMapSlice.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1136. CapabilityStatement.rest.resource:StructureMapSlice.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1137. CapabilityStatement.rest.resource:StructureMapSlice.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1138. CapabilityStatement.rest.resource:StructureMapSlice.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1139. CapabilityStatement.rest.resource:StructureMapSlice.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1140. CapabilityStatement.rest.resource:StructureMapSlice.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1141. CapabilityStatement.rest.resource:StructureMapSlice.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1142. CapabilityStatement.rest.resource:StructureMapSlice.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1143. CapabilityStatement.rest.resource:StructureMapSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1144. CapabilityStatement.rest.resource:StructureMapSlice.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1145. CapabilityStatement.rest.resource:StructureMapSlice.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1146. CapabilityStatement.rest.resource:StructureMapSlice.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1147. CapabilityStatement.rest.resource:StructureMapSlice.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1148. CapabilityStatement.rest.resource:StructureMapSlice.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1149. CapabilityStatement.rest.resource:StructureMapSlice.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1150. CapabilityStatement.rest.interaction
Definition

A specification of restful operations supported by the system.

Control0..*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1151. CapabilityStatement.rest.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1152. CapabilityStatement.rest.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1153. CapabilityStatement.rest.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1154. CapabilityStatement.rest.interaction.code
Definition

A coded identifier of the operation, supported by the system.

Control1..1
BindingThe codes SHALL be taken from SystemRestfulInteraction Operations supported by REST at the system level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1155. CapabilityStatement.rest.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as limitations on the kind of transactions allowed, or information about system wide search is implemented.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1156. CapabilityStatement.rest.searchParam
Definition

Search parameters that are supported for searching all resources for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/CapabilityStatement#CapabilityStatement.rest.resource.searchParam
Summaryfalse
Comments

Typically, the only search parameters supported for all searches are those that apply to all resources - tags, profiles, text search etc. These search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1157. CapabilityStatement.rest.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/CapabilityStatement#CapabilityStatement.rest.resource.operation
Summarytrue
Comments

CapabilityStatement.rest.operation is for operations invoked at the system level, or for operations that are supported across multiple resource types. Operations linked from CapabilityStatement.rest.operation must have OperationDefinition.system = true, or more than one Operation.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1158. CapabilityStatement.rest.compartment
Definition

An absolute URI which is a reference to the definition of a compartment that the system supports. The reference is to a CompartmentDefinition resource by its canonical URL .

Control0..*
Typecanonical(CompartmentDefinition)
Summaryfalse
Comments

At present, the only defined compartments are at CompartmentDefinition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1159. CapabilityStatement.rest:clientSlice
SliceNameclientSlice
Definition

A definition of the restful capabilities of the solution, if any.

Control0..1 This element is affected by the following invariants: cpb-1
TypeBackboneElement
Summarytrue
Comments

Multiple repetitions allow definition of both client and/or server behaviors or possibly behaviors under different configuration settings (for software or requirements statements).

InvariantsDefined on this element
cpb-9: A given resource can only be described once per RESTful mode. (: resource.select(type).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1160. CapabilityStatement.rest:clientSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1161. CapabilityStatement.rest:clientSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1162. CapabilityStatement.rest:clientSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1163. CapabilityStatement.rest:clientSlice.mode
Definition

Identifies whether this portion of the statement is describing the ability to initiate or receive restful operations.

Control1..1
BindingThe codes SHALL be taken from RestfulCapabilityMode The mode of a RESTful capability statement
Typecode
Summarytrue
Fixed Valueclient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1164. CapabilityStatement.rest:clientSlice.documentation
Definition

Information about the system's restful capabilities that apply across all applications, such as security.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1165. CapabilityStatement.rest:clientSlice.security
Definition

Information about security implementation from an interface perspective - what a client needs to know.

Control0..1
TypeBackboneElement
Standards StatusTrial Use (from Normative)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1166. CapabilityStatement.rest:clientSlice.security.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1167. CapabilityStatement.rest:clientSlice.security.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1168. CapabilityStatement.rest:clientSlice.security.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1169. CapabilityStatement.rest:clientSlice.security.cors
Definition

Server adds CORS headers when responding to requests - this enables Javascript applications to use the server.

Control0..1
Typeboolean
Summarytrue
Comments

The easiest CORS headers to add are Access-Control-Allow-Origin: * & Access-Control-Request-Method: GET, POST, PUT, DELETE. All servers SHOULD support CORS.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1170. CapabilityStatement.rest:clientSlice.security.service
Definition

Types of security services that are supported/required by the system.

Control0..*
BindingThe codes SHALL be taken from RestfulSecurityService; other codes may be used where these codes are not suitable Types of security services used with FHIR
TypeCodeableConcept
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1171. CapabilityStatement.rest:clientSlice.security.description
Definition

General description of how security works.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1172. CapabilityStatement.rest:clientSlice.resource
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1173. CapabilityStatement.rest:clientSlice.resource.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1174. CapabilityStatement.rest:clientSlice.resource.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1175. CapabilityStatement.rest:clientSlice.resource.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1176. CapabilityStatement.rest:clientSlice.resource.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1177. CapabilityStatement.rest:clientSlice.resource.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1178. CapabilityStatement.rest:clientSlice.resource.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1179. CapabilityStatement.rest:clientSlice.resource.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1180. CapabilityStatement.rest:clientSlice.resource.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1181. CapabilityStatement.rest:clientSlice.resource.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1182. CapabilityStatement.rest:clientSlice.resource.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1183. CapabilityStatement.rest:clientSlice.resource.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1184. CapabilityStatement.rest:clientSlice.resource.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1185. CapabilityStatement.rest:clientSlice.resource.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1186. CapabilityStatement.rest:clientSlice.resource.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1187. CapabilityStatement.rest:clientSlice.resource.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1188. CapabilityStatement.rest:clientSlice.resource.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1189. CapabilityStatement.rest:clientSlice.resource.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1190. CapabilityStatement.rest:clientSlice.resource.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1191. CapabilityStatement.rest:clientSlice.resource.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1192. CapabilityStatement.rest:clientSlice.resource.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1193. CapabilityStatement.rest:clientSlice.resource.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1194. CapabilityStatement.rest:clientSlice.resource.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1195. CapabilityStatement.rest:clientSlice.resource.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1196. CapabilityStatement.rest:clientSlice.resource.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1197. CapabilityStatement.rest:clientSlice.resource.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1198. CapabilityStatement.rest:clientSlice.resource.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1199. CapabilityStatement.rest:clientSlice.resource.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1200. CapabilityStatement.rest:clientSlice.resource.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1201. CapabilityStatement.rest:clientSlice.resource.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1202. CapabilityStatement.rest:clientSlice.resource.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1203. CapabilityStatement.rest:clientSlice.resource.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1204. CapabilityStatement.rest:clientSlice.resource.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1205. CapabilityStatement.rest:clientSlice.resource.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1206. CapabilityStatement.rest:clientSlice.resource.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1207. CapabilityStatement.rest:clientSlice.resource.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1208. CapabilityStatement.rest:clientSlice.resource.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1209. CapabilityStatement.rest:clientSlice.resource.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1210. CapabilityStatement.rest:clientSlice.resource.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1211. CapabilityStatement.rest:clientSlice.interaction
Definition

A specification of restful operations supported by the system.

Control0..*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1212. CapabilityStatement.rest:clientSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1213. CapabilityStatement.rest:clientSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1214. CapabilityStatement.rest:clientSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1215. CapabilityStatement.rest:clientSlice.interaction.code
Definition

A coded identifier of the operation, supported by the system.

Control1..1
BindingThe codes SHALL be taken from SystemRestfulInteraction Operations supported by REST at the system level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1216. CapabilityStatement.rest:clientSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as limitations on the kind of transactions allowed, or information about system wide search is implemented.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1217. CapabilityStatement.rest:clientSlice.searchParam
Definition

Search parameters that are supported for searching all resources for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/CapabilityStatement#CapabilityStatement.rest.resource.searchParam
Summaryfalse
Comments

Typically, the only search parameters supported for all searches are those that apply to all resources - tags, profiles, text search etc. These search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1218. CapabilityStatement.rest:clientSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/CapabilityStatement#CapabilityStatement.rest.resource.operation
Summarytrue
Comments

CapabilityStatement.rest.operation is for operations invoked at the system level, or for operations that are supported across multiple resource types. Operations linked from CapabilityStatement.rest.operation must have OperationDefinition.system = true, or more than one Operation.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1219. CapabilityStatement.rest:clientSlice.compartment
Definition

An absolute URI which is a reference to the definition of a compartment that the system supports. The reference is to a CompartmentDefinition resource by its canonical URL .

Control0..*
Typecanonical(CompartmentDefinition)
Summaryfalse
Comments

At present, the only defined compartments are at CompartmentDefinition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1220. CapabilityStatement.rest:serverSlice
SliceNameserverSlice
Definition

A definition of the restful capabilities of the solution, if any.

Control0..1 This element is affected by the following invariants: cpb-1
TypeBackboneElement
Summarytrue
Comments

Multiple repetitions allow definition of both client and/or server behaviors or possibly behaviors under different configuration settings (for software or requirements statements).

InvariantsDefined on this element
cpb-9: A given resource can only be described once per RESTful mode. (: resource.select(type).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1221. CapabilityStatement.rest:serverSlice.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1222. CapabilityStatement.rest:serverSlice.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1223. CapabilityStatement.rest:serverSlice.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1224. CapabilityStatement.rest:serverSlice.mode
Definition

Identifies whether this portion of the statement is describing the ability to initiate or receive restful operations.

Control1..1
BindingThe codes SHALL be taken from RestfulCapabilityMode The mode of a RESTful capability statement
Typecode
Summarytrue
Fixed Valueserver
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1225. CapabilityStatement.rest:serverSlice.documentation
Definition

Information about the system's restful capabilities that apply across all applications, such as security.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1226. CapabilityStatement.rest:serverSlice.security
Definition

Information about security implementation from an interface perspective - what a client needs to know.

Control0..1
TypeBackboneElement
Standards StatusTrial Use (from Normative)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1227. CapabilityStatement.rest:serverSlice.security.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1228. CapabilityStatement.rest:serverSlice.security.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1229. CapabilityStatement.rest:serverSlice.security.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1230. CapabilityStatement.rest:serverSlice.security.cors
Definition

Server adds CORS headers when responding to requests - this enables Javascript applications to use the server.

Control0..1
Typeboolean
Summarytrue
Comments

The easiest CORS headers to add are Access-Control-Allow-Origin: * & Access-Control-Request-Method: GET, POST, PUT, DELETE. All servers SHOULD support CORS.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1231. CapabilityStatement.rest:serverSlice.security.service
Definition

Types of security services that are supported/required by the system.

Control0..*
BindingThe codes SHALL be taken from RestfulSecurityService; other codes may be used where these codes are not suitable Types of security services used with FHIR
TypeCodeableConcept
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1232. CapabilityStatement.rest:serverSlice.security.description
Definition

General description of how security works.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1233. CapabilityStatement.rest:serverSlice.resource
Definition

A specification of the restful capabilities of the solution for a specific resource type.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Max of one repetition per resource type.

InvariantsDefined on this element
cpb-12: Search parameter names must be unique in the context of a resource. (: searchParam.select(name).isDistinct())
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1234. CapabilityStatement.rest:serverSlice.resource.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1235. CapabilityStatement.rest:serverSlice.resource.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1236. CapabilityStatement.rest:serverSlice.resource.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1237. CapabilityStatement.rest:serverSlice.resource.type
Definition

A type of resource exposed via the restful interface.

Control1..1
BindingThe codes SHALL be taken from ResourceType One of the resource types defined as part of this version of FHIR
Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1238. CapabilityStatement.rest:serverSlice.resource.profile
Definition

A specification of the profile that describes the solution's overall support for the resource, including any constraints on cardinality, bindings, lengths or other limitations. See further discussion in Using Profiles.

Control0..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile applies to all resources of this type - i.e. it is the superset of what is supported by the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1239. CapabilityStatement.rest:serverSlice.resource.supportedProfile
Definition

A list of profiles that represent different use cases supported by the system. For a server, "supported by the system" means the system hosts/produces a set of resources that are conformant to a particular profile, and allows clients that use its services to search using this profile and to find appropriate data. For a client, it means the system will search by this profile and process data according to the guidance implicit in the profile. See further discussion in Using Profiles.

Control0..*
Typecanonical(StructureDefinition)
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Supported profiles are different than the profile that applies to a particular resource in .rest.resource.profile. The resource profile is a general statement of what features of the resource are supported overall by the system - the sum total of the facilities it supports. A supported profile is a deeper statement about the functionality of the data and services provided by the server (or used by the client). A typical case is a laboratory system that produces a set of different reports - this is the list of types of data that it publishes. A key aspect of declaring profiles here is the question of how the client converts knowledge that the server publishes this data into working with the data; the client can inspect individual resources to determine whether they conform to a particular profile, but how does it find the ones that do? It does so by searching using the _profile parameter, so any resources listed here must be valid values for the _profile resource (using the identifier in the target profile).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1240. CapabilityStatement.rest:serverSlice.resource.documentation
Definition

Additional information about the resource type used by the system.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1241. CapabilityStatement.rest:serverSlice.resource.interaction
Definition

Identifies a restful operation supported by the solution.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

In general, a Resource will only appear in a CapabilityStatement if the server actually has some capabilities - e.g. there is at least one interaction supported. However interactions can be omitted to support summarization (_summary = true).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1242. CapabilityStatement.rest:serverSlice.resource.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1243. CapabilityStatement.rest:serverSlice.resource.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1244. CapabilityStatement.rest:serverSlice.resource.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1245. CapabilityStatement.rest:serverSlice.resource.interaction.code
Definition

Coded identifier of the operation, supported by the system resource.

Control1..1
BindingThe codes SHALL be taken from TypeRestfulInteraction Operations supported by REST at the type or instance level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1246. CapabilityStatement.rest:serverSlice.resource.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as 'delete is a logical delete' or 'updates are only allowed with version id' or 'creates permitted from pre-authorized certificates only'.

Control0..1
Typemarkdown
Summaryfalse
Requirements

REST allows a degree of variability in the implementation of RESTful solutions that is useful for exchange partners to be aware of.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1247. CapabilityStatement.rest:serverSlice.resource.versioning
Definition

This field is set to no-version to specify that the system does not support (server) or use (client) versioning for this resource type. If this has some other value, the server must at least correctly track and populate the versionId meta-property on resources. If the value is 'versioned-update', then the server supports all the versioning features, including using e-tags for version integrity in the API.

Control0..1
BindingThe codes SHALL be taken from ResourceVersionPolicy How the system supports versioning for a resource
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If a server supports versionIds correctly, it SHOULD support vread too, but is not required to do so.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1248. CapabilityStatement.rest:serverSlice.resource.readHistory
Definition

A flag for whether the server is able to return past versions as part of the vRead operation.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

It is useful to support the vRead operation for current operations, even if past versions aren't available.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1249. CapabilityStatement.rest:serverSlice.resource.updateCreate
Definition

A flag to indicate that the server allows or needs to allow the client to create new identities on the server (that is, the client PUTs to a location where there is no existing resource). Allowing this operation means that the server allows the client to create new identities on the server.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Allowing the clients to create new identities on the server means that the system administrator needs to have confidence that the clients do not create clashing identities between them. Obviously, if there is only one client, this won't happen. While creating identities on the client means that the clients need to be managed, it's much more convenient for many scenarios if such management can be put in place.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1250. CapabilityStatement.rest:serverSlice.resource.conditionalCreate
Definition

A flag that indicates that the server supports conditional create.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Create is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1251. CapabilityStatement.rest:serverSlice.resource.conditionalRead
Definition

A code that indicates how the server supports conditional read.

Control0..1
BindingThe codes SHALL be taken from ConditionalReadStatus A code that indicates how the server supports conditional read
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Read is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1252. CapabilityStatement.rest:serverSlice.resource.conditionalUpdate
Definition

A flag that indicates that the server supports conditional update.

Control0..1
Typeboolean
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Update is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1253. CapabilityStatement.rest:serverSlice.resource.conditionalDelete
Definition

A code that indicates how the server supports conditional delete.

Control0..1
BindingThe codes SHALL be taken from ConditionalDeleteStatus A code that indicates how the server supports conditional delete
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

Conditional Delete is mainly appropriate for interface engine scripts converting from other formats, such as v2.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1254. CapabilityStatement.rest:serverSlice.resource.referencePolicy
Definition

A set of flags that defines how references are supported.

Control0..*
BindingThe codes SHALL be taken from ReferenceHandlingPolicy A set of flags that defines how references are supported
Typecode
Standards StatusTrial Use (from Normative)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1255. CapabilityStatement.rest:serverSlice.resource.searchInclude
Definition

A list of _include values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1256. CapabilityStatement.rest:serverSlice.resource.searchRevInclude
Definition

A list of _revinclude (reverse include) values supported by the server.

Control0..*
Typestring
Standards StatusTrial Use (from Normative)
Summaryfalse
Comments

If this list is empty, the server does not support reverse includes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1257. CapabilityStatement.rest:serverSlice.resource.searchParam
Definition

Search parameters for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeBackboneElement
Summaryfalse
Comments

The search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1258. CapabilityStatement.rest:serverSlice.resource.searchParam.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1259. CapabilityStatement.rest:serverSlice.resource.searchParam.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1260. CapabilityStatement.rest:serverSlice.resource.searchParam.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1261. CapabilityStatement.rest:serverSlice.resource.searchParam.name
Definition

The name of the search parameter used in the interface.

Control1..1
Typestring
Summaryfalse
Comments

Parameter names cannot overlap with standard parameter names, and standard parameters cannot be redefined.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1262. CapabilityStatement.rest:serverSlice.resource.searchParam.definition
Definition

An absolute URI that is a formal reference to where this parameter was first defined, so that a client can be confident of the meaning of the search parameter (a reference to SearchParameter.url). This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

Control0..1
Typecanonical(SearchParameter)
Summaryfalse
Comments

This SHOULD be present, and matches refers to a SearchParameter by its canonical URL. If systems wish to document their support for modifiers, comparators, target resource types, and chained parameters, they should do using a search parameter resource. This element SHALL be populated if the search parameter refers to a SearchParameter defined by the FHIR core specification or externally defined IGs.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1263. CapabilityStatement.rest:serverSlice.resource.searchParam.type
Definition

The type of value a search parameter refers to, and how the content is interpreted.

Control1..1
BindingThe codes SHALL be taken from SearchParamType Data types allowed to be used for search parameters
Typecode
Summaryfalse
Comments

While this can be looked up from the definition, it is included here as a convenience for systems that autogenerate a query interface based on the server capability statement. It SHALL be the same as the type in the search parameter definition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1264. CapabilityStatement.rest:serverSlice.resource.searchParam.documentation
Definition

This allows documentation of any distinct behaviors about how the search parameter is used. For example, text matching algorithms.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1265. CapabilityStatement.rest:serverSlice.resource.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type. Consult the definition of the operation for details about how to invoke the operation, and the parameters.

Control0..*
TypeBackboneElement
Summarytrue
Comments

Operations linked from CapabilityStatement.rest.resource.operation must have OperationDefinition.type = true or OperationDefinition.instance = true.

If an operation that is listed in multiple CapabilityStatement.rest.resource.operation (e.g. for different resource types), then clients should understand that the operation is only supported on the specified resource types, and that may be a subset of those listed in OperationDefinition.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1266. CapabilityStatement.rest:serverSlice.resource.operation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1267. CapabilityStatement.rest:serverSlice.resource.operation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1268. CapabilityStatement.rest:serverSlice.resource.operation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1269. CapabilityStatement.rest:serverSlice.resource.operation.name
Definition

The name of the operation or query. For an operation, this is the name prefixed with $ and used in the URL. For a query, this is the name used in the _query parameter when the query is called.

Control1..1
Typestring
Summarytrue
Comments

The name here SHOULD be the same as the name in the definition, unless there is a name clash and the name cannot be used. The name does not include the "$" portion that is always included in the URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1270. CapabilityStatement.rest:serverSlice.resource.operation.definition
Definition

Where the formal definition can be found. If a server references the base definition of an Operation (i.e. from the specification itself such as http://hl7.org/fhir/OperationDefinition/ValueSet-expand), that means it supports the full capabilities of the operation - e.g. both GET and POST invocation. If it only supports a subset, it must define its own custom OperationDefinition with a 'base' of the original OperationDefinition. The custom definition would describe the specific subset of functionality supported.

Control1..1
Typecanonical(OperationDefinition)
Summarytrue
Comments

This can be used to build an HTML form to invoke the operation, for instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1271. CapabilityStatement.rest:serverSlice.resource.operation.documentation
Definition

Documentation that describes anything special about the operation behavior, possibly detailing different behavior for system, type and instance-level invocation of the operation.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1272. CapabilityStatement.rest:serverSlice.interaction
Definition

A specification of restful operations supported by the system.

Control0..*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1273. CapabilityStatement.rest:serverSlice.interaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1274. CapabilityStatement.rest:serverSlice.interaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1275. CapabilityStatement.rest:serverSlice.interaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1276. CapabilityStatement.rest:serverSlice.interaction.code
Definition

A coded identifier of the operation, supported by the system.

Control1..1
BindingThe codes SHALL be taken from SystemRestfulInteraction Operations supported by REST at the system level
Typecode
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1277. CapabilityStatement.rest:serverSlice.interaction.documentation
Definition

Guidance specific to the implementation of this operation, such as limitations on the kind of transactions allowed, or information about system wide search is implemented.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1278. CapabilityStatement.rest:serverSlice.searchParam
Definition

Search parameters that are supported for searching all resources for implementations to support and/or make use of - either references to ones defined in the specification, or additional ones defined for/by the implementation.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/CapabilityStatement#CapabilityStatement.rest.resource.searchParam
Summaryfalse
Comments

Typically, the only search parameters supported for all searches are those that apply to all resources - tags, profiles, text search etc. These search parameters should include the control search parameters such as _sort, _count, etc. that also apply to this resource (though many will be listed at CapabilityStatement.rest.searchParam). The behavior of some search parameters may be further described by other code or extension elements, or narrative within the capability statement or linked SearchParameter definitions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1279. CapabilityStatement.rest:serverSlice.operation
Definition

Definition of an operation or a named query together with its parameters and their meaning and type.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/CapabilityStatement#CapabilityStatement.rest.resource.operation
Summarytrue
Comments

CapabilityStatement.rest.operation is for operations invoked at the system level, or for operations that are supported across multiple resource types. Operations linked from CapabilityStatement.rest.operation must have OperationDefinition.system = true, or more than one Operation.resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1280. CapabilityStatement.rest:serverSlice.compartment
Definition

An absolute URI which is a reference to the definition of a compartment that the system supports. The reference is to a CompartmentDefinition resource by its canonical URL .

Control0..*
Typecanonical(CompartmentDefinition)
Summaryfalse
Comments

At present, the only defined compartments are at CompartmentDefinition.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1281. CapabilityStatement.messaging
Definition

A description of the messaging capabilities of the solution.

Control0..* This element is affected by the following invariants: cpb-1
TypeBackboneElement
Standards StatusTrial Use (from Normative)
Summarytrue
Comments

Multiple repetitions allow the documentation of multiple endpoints per solution.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1282. CapabilityStatement.messaging.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1283. CapabilityStatement.messaging.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1284. CapabilityStatement.messaging.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1285. CapabilityStatement.messaging.endpoint
Definition

An endpoint (network accessible address) to which messages and/or replies are to be sent.

Control0..*
TypeBackboneElement
Summaryfalse
Alternate Names3
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1286. CapabilityStatement.messaging.endpoint.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1287. CapabilityStatement.messaging.endpoint.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1288. CapabilityStatement.messaging.endpoint.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1289. CapabilityStatement.messaging.endpoint.protocol
Definition

A list of the messaging transport protocol(s) identifiers, supported by this endpoint.

Control1..1
BindingThe codes SHALL be taken from MessageTransport; other codes may be used where these codes are not suitable The protocol used for message transport
TypeCoding
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1290. CapabilityStatement.messaging.endpoint.address
Definition

The network address of the endpoint. For solutions that do not use network addresses for routing, it can be just an identifier.

Control1..1
Typeurl
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1291. CapabilityStatement.messaging.reliableCache
Definition

Length if the receiver's reliable messaging cache in minutes (if a receiver) or how long the cache length on the receiver should be (if a sender).

Control0..1
TypeunsignedInt
Summaryfalse
Comments

If this value is missing then the application does not implement (receiver) or depend on (sender) reliable messaging.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1292. CapabilityStatement.messaging.documentation
Definition

Documentation about the system's messaging capabilities for this endpoint not otherwise documented by the capability statement. For example, the process for becoming an authorized messaging exchange partner.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1293. CapabilityStatement.messaging.supportedMessage
Definition

References to message definitions for messages this system can send or receive.

Control0..*
TypeBackboneElement
Summarytrue
Comments

This is a proposed alternative to the messaging.event structure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1294. CapabilityStatement.messaging.supportedMessage.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1295. CapabilityStatement.messaging.supportedMessage.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1296. CapabilityStatement.messaging.supportedMessage.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1297. CapabilityStatement.messaging.supportedMessage.mode
Definition

The mode of this event declaration - whether application is sender or receiver.

Control1..1
BindingThe codes SHALL be taken from EventCapabilityMode The mode of a message capability statement
Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1298. CapabilityStatement.messaging.supportedMessage.definition
Definition

Points to a message definition that identifies the messaging event, message structure, allowed responses, etc.

Control1..1
Typecanonical(MessageDefinition)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1299. CapabilityStatement.document
Definition

A document definition.

Control0..* This element is affected by the following invariants: cpb-1
TypeBackboneElement
Standards StatusTrial Use (from Normative)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1300. CapabilityStatement.document.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
1301. CapabilityStatement.document.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1302. CapabilityStatement.document.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
1303. CapabilityStatement.document.mode
Definition

Mode of this document declaration - whether an application is a producer or consumer.

Control1..1
BindingThe codes SHALL be taken from DocumentMode Whether the application produces or consumes documents
Typecode
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1304. CapabilityStatement.document.documentation
Definition

A description of how the application supports or uses the specified document profile. For example, when documents are created, what action is taken with consumed documents, etc.

Control0..1
Typemarkdown
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
1305. CapabilityStatement.document.profile
Definition

A profile on the document Bundle that constrains which resources are present, and their contents.

Control1..1
Typecanonical(StructureDefinition)
Summarytrue
Comments

The profile is actually on the Bundle.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))