QI-Core Implementation Guide
6.0.0 - STU6 United States of America flag

This page is part of the Quality Improvement Core Framework (v6.0.0: STU6 (v6.0.0)) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: QICoreMedicationStatement - Detailed Descriptions

Active as of 2018-08-22

Definitions for the qicore-medicationstatement resource profile.

Guidance on how to interpret the contents of this table can be found here

0. MedicationStatement
2. MedicationStatement.status
Short(QI-Core) active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken
4. MedicationStatement.medication[x]
Short(QI-Core) What medication was taken
BindingThe codes SHOULD be taken from Medication Clinical Drug .
(preferred to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.4
TypeChoice of: CodeableConcept, Reference(QICore Medication)
[x] NoteSee Choice of Data Types for further information about how to use [x]
6. MedicationStatement.subject
Short(QI-Core) Who is/was taking the medication
TypeReference(QICore Patient)
8. MedicationStatement.effective[x]
Short(QI-Core) The date/time or interval when the medication is/was/will be taken
[x] NoteSee Choice of Data Types for further information about how to use [x]
10. MedicationStatement.dateAsserted
Short(QI-Core) When the statement was asserted?
Control0..1
12. MedicationStatement.informationSource
Short(QI-Core) Person or organization that provided the information about the taking of this medication
TypeReference(QICore Patient, QICore Practitioner, QICore RelatedPerson)
14. MedicationStatement.derivedFrom
Short(QI-Core) Additional supporting information
16. MedicationStatement.reasonCode
TypeCodeableConcept
Must Supportfalse
18. MedicationStatement.dosage
Short(QI-Core) Details of how medication is/was taken or should be taken
TypeDosage
20. MedicationStatement.dosage.modifierExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Must Supportfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions.

22. MedicationStatement.dosage.timing
Short(QI-Core) When medication should be administered
24. MedicationStatement.dosage.site
Comments

If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

Must Supportfalse
26. MedicationStatement.dosage.route
Short(QI-Core) How drug should enter body
BindingThe codes SHOULD be taken from SNOMEDCTRouteCodes
(preferred to http://hl7.org/fhir/ValueSet/route-codes
28. MedicationStatement.dosage.doseAndRate
Short(QI-Core) Amount of medication administered
30. MedicationStatement.dosage.doseAndRate.dose[x]
Short(QI-Core) Amount of medication per dose
[x] NoteSee Choice of Data Types for further information about how to use [x]

Guidance on how to interpret the contents of this table can be found here

0. MedicationStatement
Definition

A record of a medication that is being consumed by a patient. A MedicationStatement may indicate that the patient may be taking the medication now or has taken the medication in the past or will be taking the medication in the future. The source of this information can be the patient, significant other (such as a family member or spouse), or a clinician. A common scenario where this information is captured is during the history taking process during a patient visit or stay. The medication information may come from sources such as the patient's memory, from a prescription bottle, or from a list of medications the patient, clinician or other party maintains.

The primary difference between a medication statement and a medication administration is that the medication administration has complete administration information and is based on actual administration information from the person who administered the medication. A medication statement is often, if not always, less specific. There is no required date/time when the medication was administered, in fact we only know that a source has reported the patient is taking this medication, where details such as time, quantity, or rate or even medication product may be incomplete or missing or less precise. As stated earlier, the medication statement information may come from the patient's memory, from a prescription bottle or from a list of medications the patient, clinician or other party maintains. Medication administration is more formal and is not missing detailed information.

ShortRecord of medication being taken by a patient
Comments

When interpreting a medicationStatement, the value of the status and NotTaken needed to be considered: MedicationStatement.status + MedicationStatement.wasNotTaken Status=Active + NotTaken=T = Not currently taking Status=Completed + NotTaken=T = Not taken in the past Status=Intended + NotTaken=T = No intention of taking Status=Active + NotTaken=F = Taking, but not as prescribed Status=Active + NotTaken=F = Taking Status=Intended +NotTaken= F = Will be taking (not started) Status=Completed + NotTaken=F = Taken in past Status=In Error + NotTaken=N/A = In Error.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. MedicationStatement.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. MedicationStatement.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. MedicationStatement.status
Definition

A code representing the patient or other source's judgment about the state of the medication used that this statement is about. Generally, this will be active or completed.

Short(QI-Core) active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-takenactive | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken
Comments

MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error).

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from Medication Status Codeshttp://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1
Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. MedicationStatement.medication[x]
Definition

Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

Short(QI-Core) What medication was takenWhat medication was taken
Comments

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

Control1..1
BindingThe codes SHOULD be taken from For example codes, see Medication Clinical Drug .http://hl7.org/fhir/ValueSet/medication-codes
(preferred to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.4
TypeChoice of: CodeableConcept, Reference(QICore Medication, Medication)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. MedicationStatement.subject
Definition

The person, animal or group who is/was taking the medication.

Short(QI-Core) Who is/was taking the medicationWho is/was taking the medication
Control1..1
TypeReference(QICore Patient, Patient, Group)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. MedicationStatement.effective[x]
Definition

The interval of time during which it is being asserted that the patient is/was/will be taking the medication (or was not taking, when the MedicationStatement.taken element is No).

Short(QI-Core) The date/time or interval when the medication is/was/will be takenThe date/time or interval when the medication is/was/will be taken
Comments

This attribute reflects the period over which the patient consumed the medication and is expected to be populated on the majority of Medication Statements. If the medication is still being taken at the time the statement is recorded, the "end" date will be omitted. The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

Control0..1
TypeChoice of: dateTime, Period
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. MedicationStatement.dateAsserted
Definition

The date when the medication statement was asserted by the information source.

Short(QI-Core) When the statement was asserted?When the statement was asserted?
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. MedicationStatement.informationSource
Definition

The person or organization that provided the information about the taking of this medication. Note: Use derivedFrom when a MedicationStatement is derived from other resources, e.g. Claim or MedicationRequest.

Short(QI-Core) Person or organization that provided the information about the taking of this medicationPerson or organization that provided the information about the taking of this medication
Control0..1
TypeReference(QICore Patient, QICore Practitioner, QICore RelatedPerson, Patient, Practitioner, PractitionerRole, RelatedPerson, Organization)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. MedicationStatement.derivedFrom
Definition

Allows linking the MedicationStatement to the underlying MedicationRequest, or to other information that supports or is used to derive the MedicationStatement.

Short(QI-Core) Additional supporting informationAdditional supporting information
Comments

Likely references would be to MedicationRequest, MedicationDispense, Claim, Observation or QuestionnaireAnswers. The most common use cases for deriving a MedicationStatement comes from creating a MedicationStatement from a MedicationRequest or from a lab observation or a claim. it should be noted that the amount of information that is available varies from the type resource that you derive the MedicationStatement from.

Control0..*
TypeReference(Resource)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. MedicationStatement.reasonCode
Definition

A reason for why the medication is being/was taken.

ShortReason for why the medication is being/was taken
Comments

This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonForUseReference.

Control0..*
BindingFor example codes, see Condition/Problem/DiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code
(example to http://hl7.org/fhir/ValueSet/condition-code
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MedicationStatement.dosage
Definition

Indicates how the medication is/was or should be taken by the patient.

Short(QI-Core) Details of how medication is/was taken or should be takenDetails of how medication is/was taken or should be taken
Comments

The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

Control0..*
TypeDosage
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MedicationStatement.dosage.modifierExtension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensionExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions.


Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. MedicationStatement.dosage.timing
Definition

When medication should be administered.

Short(QI-Core) When medication should be administeredWhen medication should be administered
Comments

This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

Control0..1
TypeTiming
Is Modifierfalse
Summarytrue
Requirements

The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MedicationStatement.dosage.site
Definition

Body site to administer to.

ShortBody site to administer to
Comments

If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.


If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

Control0..1
BindingFor example codes, see SNOMEDCTAnatomicalStructureForAdministrationSiteCodeshttp://hl7.org/fhir/ValueSet/approach-site-codes
(example to http://hl7.org/fhir/ValueSet/approach-site-codes
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

A coded specification of the anatomic site where the medication first enters the body.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MedicationStatement.dosage.route
Definition

How drug should enter body.

Short(QI-Core) How drug should enter bodyHow drug should enter body
Control0..1
BindingThe codes SHOULD be taken from For example codes, see SNOMEDCTRouteCodeshttp://hl7.org/fhir/ValueSet/route-codes
(preferred to http://hl7.org/fhir/ValueSet/route-codes
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MedicationStatement.dosage.doseAndRate
Definition

The amount of medication administered.

Short(QI-Core) Amount of medication administeredAmount of medication administered
Control0..*
TypeElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. MedicationStatement.dosage.doseAndRate.dose[x]
Definition

Amount of medication per dose.

Short(QI-Core) Amount of medication per doseAmount of medication per dose
Comments

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

Control0..1
TypeChoice of: Range, Quantity(SimpleQuantity)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Requirements

The amount of therapeutic or other substance given at one administration event.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. MedicationStatement
Definition

A record of a medication that is being consumed by a patient. A MedicationStatement may indicate that the patient may be taking the medication now or has taken the medication in the past or will be taking the medication in the future. The source of this information can be the patient, significant other (such as a family member or spouse), or a clinician. A common scenario where this information is captured is during the history taking process during a patient visit or stay. The medication information may come from sources such as the patient's memory, from a prescription bottle, or from a list of medications the patient, clinician or other party maintains.

The primary difference between a medication statement and a medication administration is that the medication administration has complete administration information and is based on actual administration information from the person who administered the medication. A medication statement is often, if not always, less specific. There is no required date/time when the medication was administered, in fact we only know that a source has reported the patient is taking this medication, where details such as time, quantity, or rate or even medication product may be incomplete or missing or less precise. As stated earlier, the medication statement information may come from the patient's memory, from a prescription bottle or from a list of medications the patient, clinician or other party maintains. Medication administration is more formal and is not missing detailed information.

ShortRecord of medication being taken by a patient
Comments

When interpreting a medicationStatement, the value of the status and NotTaken needed to be considered: MedicationStatement.status + MedicationStatement.wasNotTaken Status=Active + NotTaken=T = Not currently taking Status=Completed + NotTaken=T = Not taken in the past Status=Intended + NotTaken=T = No intention of taking Status=Active + NotTaken=F = Taking, but not as prescribed Status=Active + NotTaken=F = Taking Status=Intended +NotTaken= F = Will be taking (not started) Status=Completed + NotTaken=F = Taken in past Status=In Error + NotTaken=N/A = In Error.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. MedicationStatement.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. MedicationStatement.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. MedicationStatement.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. MedicationStatement.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. MedicationStatement.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. MedicationStatement.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. MedicationStatement.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. MedicationStatement.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. MedicationStatement.identifier
Definition

Identifiers associated with this Medication Statement that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

ShortExternal identifier
Comments

This is a business identifier, not a resource identifier.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. MedicationStatement.basedOn
Definition

A plan, proposal or order that is fulfilled in whole or in part by this event.

ShortFulfils plan, proposal or order
Control0..*
TypeReference(MedicationRequest, CarePlan, ServiceRequest)
Is Modifierfalse
Summarytrue
Requirements

Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. MedicationStatement.partOf
Definition

A larger event of which this particular event is a component or step.

ShortPart of referenced event
Control0..*
TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Observation)
Is Modifierfalse
Summarytrue
Requirements

This should not be used when indicating which resource a MedicationStatement has been derived from. If that is the use case, then MedicationStatement.derivedFrom should be used.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. MedicationStatement.status
Definition

A code representing the patient or other source's judgment about the state of the medication used that this statement is about. Generally, this will be active or completed.

Short(QI-Core) active | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken
Comments

MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error).

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from Medication Status Codes
(required to http://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1
Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. MedicationStatement.statusReason
Definition

Captures the reason for the current state of the MedicationStatement.

ShortReason for current status
Comments

This is generally only used for "exception" statuses such as "not-taken", "on-hold", "cancelled" or "entered-in-error". The reason for performing the event at all is captured in reasonCode, not here.

Control0..*
BindingFor example codes, see SNOMEDCTDrugTherapyStatusCodes
(example to http://hl7.org/fhir/ValueSet/reason-medication-status-codes
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. MedicationStatement.category
Definition

Indicates where the medication is expected to be consumed or administered.

ShortType of medication usage
Control0..1
BindingThe codes SHOULD be taken from Medication usage category codes
(preferred to http://hl7.org/fhir/ValueSet/medication-statement-category
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. MedicationStatement.medication[x]
Definition

Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

Short(QI-Core) What medication was taken
Comments

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

Control1..1
BindingThe codes SHOULD be taken from Medication Clinical Drug .
(preferred to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.4
TypeChoice of: CodeableConcept, Reference(QICore Medication)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. MedicationStatement.subject
Definition

The person, animal or group who is/was taking the medication.

Short(QI-Core) Who is/was taking the medication
Control1..1
TypeReference(QICore Patient)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. MedicationStatement.context
Definition

The encounter or episode of care that establishes the context for this MedicationStatement.

ShortEncounter / Episode associated with MedicationStatement
Control0..1
TypeReference(Encounter, EpisodeOfCare)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. MedicationStatement.effective[x]
Definition

The interval of time during which it is being asserted that the patient is/was/will be taking the medication (or was not taking, when the MedicationStatement.taken element is No).

Short(QI-Core) The date/time or interval when the medication is/was/will be taken
Comments

This attribute reflects the period over which the patient consumed the medication and is expected to be populated on the majority of Medication Statements. If the medication is still being taken at the time the statement is recorded, the "end" date will be omitted. The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

Control0..1
TypeChoice of: dateTime, Period
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. MedicationStatement.dateAsserted
Definition

The date when the medication statement was asserted by the information source.

Short(QI-Core) When the statement was asserted?
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. MedicationStatement.informationSource
Definition

The person or organization that provided the information about the taking of this medication. Note: Use derivedFrom when a MedicationStatement is derived from other resources, e.g. Claim or MedicationRequest.

Short(QI-Core) Person or organization that provided the information about the taking of this medication
Control0..1
TypeReference(QICore Patient, QICore Practitioner, QICore RelatedPerson)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. MedicationStatement.derivedFrom
Definition

Allows linking the MedicationStatement to the underlying MedicationRequest, or to other information that supports or is used to derive the MedicationStatement.

Short(QI-Core) Additional supporting information
Comments

Likely references would be to MedicationRequest, MedicationDispense, Claim, Observation or QuestionnaireAnswers. The most common use cases for deriving a MedicationStatement comes from creating a MedicationStatement from a MedicationRequest or from a lab observation or a claim. it should be noted that the amount of information that is available varies from the type resource that you derive the MedicationStatement from.

Control0..*
TypeReference(Resource)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. MedicationStatement.reasonCode
Definition

A reason for why the medication is being/was taken.

ShortReason for why the medication is being/was taken
Comments

This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonForUseReference.

Control0..*
BindingFor example codes, see Condition/Problem/DiagnosisCodes
(example to http://hl7.org/fhir/ValueSet/condition-code
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. MedicationStatement.reasonReference
Definition

Condition or observation that supports why the medication is being/was taken.

ShortCondition or observation that supports why the medication is being/was taken
Comments

This is a reference to a condition that is the reason why the medication is being/was taken. If only a code exists, use reasonForUseCode.

Control0..*
TypeReference(Condition, Observation, DiagnosticReport)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. MedicationStatement.note
Definition

Provides extra information about the medication statement that is not conveyed by the other attributes.

ShortFurther information about the statement
Control0..*
TypeAnnotation
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. MedicationStatement.dosage
Definition

Indicates how the medication is/was or should be taken by the patient.

Short(QI-Core) Details of how medication is/was taken or should be taken
Comments

The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

Control0..*
TypeDosage
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. MedicationStatement.dosage.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
54. MedicationStatement.dosage.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationStatement.dosage.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
56. MedicationStatement.dosage.modifierExtension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. MedicationStatement.dosage.sequence
Definition

Indicates the order in which the dosage instructions should be applied or interpreted.

ShortThe order of the dosage instructions
Control0..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

If the sequence number of multiple Dosages is the same, then it is implied that the instructions are to be treated as concurrent. If the sequence number is different, then the Dosages are intended to be sequential.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. MedicationStatement.dosage.text
Definition

Free text dosage instructions e.g. SIG.

ShortFree text dosage instructions e.g. SIG
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing. Additional information about administration or preparation of the medication should be included as text.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. MedicationStatement.dosage.additionalInstruction
Definition

Supplemental instructions to the patient on how to take the medication (e.g. "with meals" or"take half to one hour before food") or warnings for the patient about the medication (e.g. "may cause drowsiness" or "avoid exposure of skin to direct sunlight or sunlamps").

ShortSupplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness"
Comments

Information about administration or preparation of the medication (e.g. "infuse as rapidly as possibly via intraperitoneal port" or "immediately following drug x") should be populated in dosage.text.

Control0..*
BindingFor example codes, see SNOMEDCTAdditionalDosageInstructions
(example to http://hl7.org/fhir/ValueSet/additional-instruction-codes
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Additional instruction is intended to be coded, but where no code exists, the element could include text. For example, "Swallow with plenty of water" which might or might not be coded.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. MedicationStatement.dosage.patientInstruction
Definition

Instructions in terms that are understood by the patient or consumer.

ShortPatient or consumer oriented instructions
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. MedicationStatement.dosage.timing
Definition

When medication should be administered.

Short(QI-Core) When medication should be administered
Comments

This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

Control0..1
TypeTiming
Is Modifierfalse
Summarytrue
Requirements

The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. MedicationStatement.dosage.asNeeded[x]
Definition

Indicates whether the Medication is only taken when needed within a specific dosing schedule (Boolean option), or it indicates the precondition for taking the Medication (CodeableConcept).

ShortTake "as needed" (for x)
Comments

Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed".

Control0..1
BindingFor example codes, see SNOMEDCTMedicationAsNeededReasonCodes
(example to http://hl7.org/fhir/ValueSet/medication-as-needed-reason
TypeChoice of: boolean, CodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. MedicationStatement.dosage.site
Definition

Body site to administer to.

ShortBody site to administer to
Comments

If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

Control0..1
BindingFor example codes, see SNOMEDCTAnatomicalStructureForAdministrationSiteCodes
(example to http://hl7.org/fhir/ValueSet/approach-site-codes
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

A coded specification of the anatomic site where the medication first enters the body.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. MedicationStatement.dosage.route
Definition

How drug should enter body.

Short(QI-Core) How drug should enter body
Control0..1
BindingThe codes SHOULD be taken from SNOMEDCTRouteCodes
(preferred to http://hl7.org/fhir/ValueSet/route-codes
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. MedicationStatement.dosage.method
Definition

Technique for administering medication.

ShortTechnique for administering medication
Comments

Terminologies used often pre-coordinate this term with the route and or form of administration.

Control0..1
BindingFor example codes, see SNOMEDCTAdministrationMethodCodes
(example to http://hl7.org/fhir/ValueSet/administration-method-codes
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections. For examples, Slow Push; Deep IV.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. MedicationStatement.dosage.doseAndRate
Definition

The amount of medication administered.

Short(QI-Core) Amount of medication administered
Control0..*
TypeElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. MedicationStatement.dosage.doseAndRate.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
80. MedicationStatement.dosage.doseAndRate.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on MedicationStatement.dosage.doseAndRate.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
82. MedicationStatement.dosage.doseAndRate.type
Definition

The kind of dose or rate specified, for example, ordered or calculated.

ShortThe kind of dose or rate specified
Control0..1
BindingFor example codes, see DoseAndRateType
(example to http://hl7.org/fhir/ValueSet/dose-rate-type
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

If the type is not populated, assume to be "ordered".

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. MedicationStatement.dosage.doseAndRate.dose[x]
Definition

Amount of medication per dose.

Short(QI-Core) Amount of medication per dose
Comments

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

Control0..1
TypeChoice of: Range, Quantity(SimpleQuantity)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Requirements

The amount of therapeutic or other substance given at one administration event.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. MedicationStatement.dosage.doseAndRate.rate[x]
Definition

Amount of medication per unit of time.

ShortAmount of medication per unit of time
Comments

It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.

It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.

Control0..1
TypeChoice of: Ratio, Range, Quantity(SimpleQuantity)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Requirements

Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. MedicationStatement.dosage.maxDosePerPeriod
Definition

Upper limit on medication per unit of time.

ShortUpper limit on medication per unit of time
Comments

This is intended for use as an adjunct to the dosage when there is an upper cap. For example "2 tablets every 4 hours to a maximum of 8/day".

Control0..1
TypeRatio
Is Modifierfalse
Summarytrue
Requirements

The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. MedicationStatement.dosage.maxDosePerAdministration
Definition

Upper limit on medication per administration.

ShortUpper limit on medication per administration
Comments

This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg.

Control0..1
TypeQuantity(SimpleQuantity)
Is Modifierfalse
Summarytrue
Requirements

The maximum total quantity of a therapeutic substance that may be administered to a subject per administration.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. MedicationStatement.dosage.maxDosePerLifetime
Definition

Upper limit on medication per lifetime of the patient.

ShortUpper limit on medication per lifetime of the patient
Control0..1
TypeQuantity(SimpleQuantity)
Is Modifierfalse
Summarytrue
Requirements

The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))