QI-Core Implementation Guide
6.0.0 - STU6 United States of America flag

This page is part of the Quality Improvement Core Framework (v6.0.0: STU6 (v6.0.0)) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: QICoreFamilyMemberHistory - Detailed Descriptions

Active as of 2018-08-22

Definitions for the qicore-familymemberhistory resource profile.

Guidance on how to interpret the contents of this table can be found here

0. FamilyMemberHistory
2. FamilyMemberHistory.patient
Short(QI-Core) Patient history is about
TypeReference(QICore Patient)
4. FamilyMemberHistory.date
Short(QI-Core) When history was recorded or last updated
6. FamilyMemberHistory.relationship
Short(QI-Core) Relationship to the subject
BindingThe codes SHOULD be taken from FamilyMember
(preferred to http://terminology.hl7.org/ValueSet/v3-FamilyMember
8. FamilyMemberHistory.age[x]
Short(QI-Core) (approximate) age
[x] NoteSee Choice of Data Types for further information about how to use [x]
10. FamilyMemberHistory.deceased[x]
Short(QI-Core) Dead? How old/when?
[x] NoteSee Choice of Data Types for further information about how to use [x]
12. FamilyMemberHistory.condition
Must Supportfalse
14. FamilyMemberHistory.condition.extension:condition-abatement
Slice Namecondition-abatement
Control0..1
TypeExtension(abatement) (Extension Type: Choice of: date, Age, boolean)
Must Supportfalse
16. FamilyMemberHistory.condition.extension:condition-severity
Slice Namecondition-severity
Control0..1
BindingThe codes SHOULD be taken from Condition/DiagnosisSeverity
(preferred to http://hl7.org/fhir/ValueSet/condition-severity
TypeExtension(severity) (Extension Type: CodeableConcept)
Must Supportfalse
18. FamilyMemberHistory.condition.code
Short(QI-Core) Condition suffered by relation
BindingUnless not suitable, these codes SHALL be taken from Condition/Problem/DiagnosisCodes
(extensible to http://hl7.org/fhir/ValueSet/condition-code
20. FamilyMemberHistory.condition.onset[x]
[x] NoteSee Choice of Data Types for further information about how to use [x]
Must Supportfalse

Guidance on how to interpret the contents of this table can be found here

0. FamilyMemberHistory
Definition

Significant health conditions for a person related to the patient relevant in the context of care for the patient.

ShortInformation about patient's relatives, relevant for patient
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
fhs-1: Can have age[x] or born[x], but not both (age.empty() or born.empty())
fhs-2: Can only have estimatedAge if age[x] is present (age.exists() or estimatedAge.empty())
fhs-1: Can have age[x] or born[x], but not both (age.empty() or born.empty())
fhs-2: Can only have estimatedAge if age[x] is present (age.exists() or estimatedAge.empty())
2. FamilyMemberHistory.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. FamilyMemberHistory.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. FamilyMemberHistory.status
Definition

A code specifying the status of the record of the family history of a specific family member.

Shortpartial | completed | entered-in-error | health-unknown
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from FamilyHistoryStatushttp://hl7.org/fhir/ValueSet/history-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/history-status|4.0.1
Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. FamilyMemberHistory.patient
Definition

The person who this history concerns.

Short(QI-Core) Patient history is aboutPatient history is about
Control1..1
TypeReference(QICore Patient, Patient)
Is Modifierfalse
Summarytrue
Alternate NamesProband
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. FamilyMemberHistory.date
Definition

The date (and possibly time) when the family member history was recorded or last updated.

Short(QI-Core) When history was recorded or last updatedWhen history was recorded or last updated
Comments

This should be captured even if the same as the date on the List aggregating the full family history.

Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows determination of how current the summary is.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. FamilyMemberHistory.relationship
Definition

The type of relationship this person has to the patient (father, mother, brother etc.).

Short(QI-Core) Relationship to the subjectRelationship to the subject
Control1..1
BindingThe codes SHOULD be taken from For example codes, see FamilyMemberhttp://terminology.hl7.org/ValueSet/v3-FamilyMember
(preferred to http://terminology.hl7.org/ValueSet/v3-FamilyMember
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. FamilyMemberHistory.age[x]
Definition

The age of the relative at the time the family member history is recorded.

Short(QI-Core) (approximate) age(approximate) age
Comments

use estimatedAge to indicate whether the age is actual or not.

Control0..1
This element is affected by the following invariants: fhs-1
TypeChoice of: Age, Range, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

While age can be calculated from date of birth, sometimes recording age directly is more natural for clinicians.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. FamilyMemberHistory.deceased[x]
Definition

Deceased flag or the actual or approximate age of the relative at the time of death for the family member history record.

Short(QI-Core) Dead? How old/when?Dead? How old/when?
Control0..1
TypeChoice of: boolean, Age, Range, date, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. FamilyMemberHistory.condition
Definition

The significant Conditions (or condition) that the family member had. This is a repeating section to allow a system to represent more than one condition per resource, though there is nothing stopping multiple resources - one per condition.

ShortCondition that the related person had
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. FamilyMemberHistory.condition.extension:condition-abatement
Slice Namecondition-abatement
Definition

The approximate date, age, or flag indicating that the condition of the family member resolved. The abatement should only be specified if the condition is stated in the positive sense, i.e., the didNotHave flag is false.

ShortWhen (or if) the family member's condition resolved
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(abatement) (Extension Type: Choice of: date, Age, boolean)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. FamilyMemberHistory.condition.extension:condition-severity
Slice Namecondition-severity
Definition

A qualification of the seriousness or impact on health of the family member condition.

ShortThe seriousness of the family member condition
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(severity) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. FamilyMemberHistory.condition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. FamilyMemberHistory.condition.code
Definition

The actual condition specified. Could be a coded condition (like MI or Diabetes) or a less specific string like 'cancer' depending on how much is known about the condition and the capabilities of the creating system.

Short(QI-Core) Condition suffered by relationCondition suffered by relation
Control1..1
BindingUnless not suitable, these codes SHALL be taken from For example codes, see Condition/Problem/DiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code
(extensible to http://hl7.org/fhir/ValueSet/condition-code
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. FamilyMemberHistory.condition.onset[x]
Definition

Either the age of onset, range of approximate age or descriptive string can be recorded. For conditions with multiple occurrences, this describes the first known occurrence.

ShortWhen condition first manifested
Control0..1
TypeChoice of: Age, Range, Period, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Requirements

Age of onset of a condition in relatives is predictive of risk for the patient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. FamilyMemberHistory
Definition

Significant health conditions for a person related to the patient relevant in the context of care for the patient.

ShortInformation about patient's relatives, relevant for patient
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
fhs-1: Can have age[x] or born[x], but not both (age.empty() or born.empty())
fhs-2: Can only have estimatedAge if age[x] is present (age.exists() or estimatedAge.empty())
2. FamilyMemberHistory.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. FamilyMemberHistory.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. FamilyMemberHistory.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. FamilyMemberHistory.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. FamilyMemberHistory.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. FamilyMemberHistory.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. FamilyMemberHistory.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. FamilyMemberHistory.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. FamilyMemberHistory.identifier
Definition

Business identifiers assigned to this family member history by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

ShortExternal Id(s) for this record
Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

Allows identification of the family member history as it is known by various participating systems and in a way that remains consistent across servers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. FamilyMemberHistory.instantiatesCanonical
Definition

The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this FamilyMemberHistory.

ShortInstantiates FHIR protocol or definition
Control0..*
Typecanonical(PlanDefinition, Questionnaire, ActivityDefinition, Measure, OperationDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. FamilyMemberHistory.instantiatesUri
Definition

The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this FamilyMemberHistory.

ShortInstantiates external protocol or definition
Comments

This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

Control0..*
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. FamilyMemberHistory.status
Definition

A code specifying the status of the record of the family history of a specific family member.

Shortpartial | completed | entered-in-error | health-unknown
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from FamilyHistoryStatus
(required to http://hl7.org/fhir/ValueSet/history-status|4.0.1
Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. FamilyMemberHistory.dataAbsentReason
Definition

Describes why the family member's history is not available.

Shortsubject-unknown | withheld | unable-to-obtain | deferred
Control0..1
BindingFor example codes, see FamilyHistoryAbsentReason
(example to http://hl7.org/fhir/ValueSet/history-absent-reason
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

This is a separate element to allow it to have a distinct binding from reasonCode.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. FamilyMemberHistory.patient
Definition

The person who this history concerns.

Short(QI-Core) Patient history is about
Control1..1
TypeReference(QICore Patient)
Is Modifierfalse
Summarytrue
Alternate NamesProband
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. FamilyMemberHistory.date
Definition

The date (and possibly time) when the family member history was recorded or last updated.

Short(QI-Core) When history was recorded or last updated
Comments

This should be captured even if the same as the date on the List aggregating the full family history.

Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows determination of how current the summary is.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. FamilyMemberHistory.name
Definition

This will either be a name or a description; e.g. "Aunt Susan", "my cousin with the red hair".

ShortThe family member described
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows greater ease in ensuring the same person is being talked about.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. FamilyMemberHistory.relationship
Definition

The type of relationship this person has to the patient (father, mother, brother etc.).

Short(QI-Core) Relationship to the subject
Control1..1
BindingThe codes SHOULD be taken from FamilyMember
(preferred to http://terminology.hl7.org/ValueSet/v3-FamilyMember
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. FamilyMemberHistory.sex
Definition

The birth sex of the family member.

Shortmale | female | other | unknown
Comments

This element should ideally reflect whether the individual is genetically male or female. However, as reported information based on the knowledge of the patient or reporting friend/relative, there may be situations where the reported sex might not be totally accurate. E.g. 'Aunt Sue' might be XY rather than XX. Questions soliciting this information should be phrased to encourage capture of genetic sex where known. However, systems performing analysis should also allow for the possibility of imprecision with this element.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from AdministrativeGender
(extensible to http://hl7.org/fhir/ValueSet/administrative-gender
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Not all relationship codes imply sex and the relative's sex can be relevant for risk assessments.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. FamilyMemberHistory.born[x]
Definition

The actual or approximate date of birth of the relative.

Short(approximate) date of birth
Control0..1
This element is affected by the following invariants: fhs-1
TypeChoice of: Period, date, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Allows calculation of the relative's age.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. FamilyMemberHistory.age[x]
Definition

The age of the relative at the time the family member history is recorded.

Short(QI-Core) (approximate) age
Comments

use estimatedAge to indicate whether the age is actual or not.

Control0..1
This element is affected by the following invariants: fhs-1
TypeChoice of: Age, Range, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

While age can be calculated from date of birth, sometimes recording age directly is more natural for clinicians.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. FamilyMemberHistory.estimatedAge
Definition

If true, indicates that the age value specified is an estimated value.

ShortAge is estimated?
Comments

This element is labeled as a modifier because the fact that age is estimated can/should change the results of any algorithm that calculates based on the specified age.

Control0..1
This element is affected by the following invariants: fhs-2
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Clinicians often prefer to specify an estimaged age rather than an age range.

Meaning if MissingIt is unknown whether the age is an estimate or not
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. FamilyMemberHistory.deceased[x]
Definition

Deceased flag or the actual or approximate age of the relative at the time of death for the family member history record.

Short(QI-Core) Dead? How old/when?
Control0..1
TypeChoice of: boolean, Age, Range, date, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. FamilyMemberHistory.reasonCode
Definition

Describes why the family member history occurred in coded or textual form.

ShortWhy was family member history performed?
Comments

Textual reasons can be captured using reasonCode.text.

Control0..*
BindingFor example codes, see SNOMEDCTClinicalFindings
(example to http://hl7.org/fhir/ValueSet/clinical-findings
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. FamilyMemberHistory.reasonReference
Definition

Indicates a Condition, Observation, AllergyIntolerance, or QuestionnaireResponse that justifies this family member history event.

ShortWhy was family member history performed?
Control0..*
TypeReference(Condition, Observation, AllergyIntolerance, QuestionnaireResponse, DiagnosticReport, DocumentReference)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. FamilyMemberHistory.note
Definition

This property allows a non condition-specific note to the made about the related person. Ideally, the note would be in the condition property, but this is not always possible.

ShortGeneral note about related person
Control0..*
TypeAnnotation
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. FamilyMemberHistory.condition
Definition

The significant Conditions (or condition) that the family member had. This is a repeating section to allow a system to represent more than one condition per resource, though there is nothing stopping multiple resources - one per condition.

ShortCondition that the related person had
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. FamilyMemberHistory.condition.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
56. FamilyMemberHistory.condition.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on FamilyMemberHistory.condition.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
58. FamilyMemberHistory.condition.extension:condition-abatement
Slice Namecondition-abatement
Definition

The approximate date, age, or flag indicating that the condition of the family member resolved. The abatement should only be specified if the condition is stated in the positive sense, i.e., the didNotHave flag is false.

ShortWhen (or if) the family member's condition resolved
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(abatement) (Extension Type: Choice of: date, Age, boolean)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
60. FamilyMemberHistory.condition.extension:condition-severity
Slice Namecondition-severity
Definition

A qualification of the seriousness or impact on health of the family member condition.

ShortThe seriousness of the family member condition
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(severity) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
62. FamilyMemberHistory.condition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. FamilyMemberHistory.condition.code
Definition

The actual condition specified. Could be a coded condition (like MI or Diabetes) or a less specific string like 'cancer' depending on how much is known about the condition and the capabilities of the creating system.

Short(QI-Core) Condition suffered by relation
Control1..1
BindingUnless not suitable, these codes SHALL be taken from Condition/Problem/DiagnosisCodes
(extensible to http://hl7.org/fhir/ValueSet/condition-code
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. FamilyMemberHistory.condition.outcome
Definition

Indicates what happened following the condition. If the condition resulted in death, deceased date is captured on the relation.

Shortdeceased | permanent disability | etc.
Control0..1
BindingFor example codes, see ConditionOutcomeCodes
(example to http://hl7.org/fhir/ValueSet/condition-outcome
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. FamilyMemberHistory.condition.contributedToDeath
Definition

This condition contributed to the cause of death of the related person. If contributedToDeath is not populated, then it is unknown.

ShortWhether the condition contributed to the cause of death
Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. FamilyMemberHistory.condition.onset[x]
Definition

Either the age of onset, range of approximate age or descriptive string can be recorded. For conditions with multiple occurrences, this describes the first known occurrence.

ShortWhen condition first manifested
Control0..1
TypeChoice of: Age, Range, Period, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Requirements

Age of onset of a condition in relatives is predictive of risk for the patient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. FamilyMemberHistory.condition.note
Definition

An area where general notes can be placed about this specific condition.

ShortExtra information about condition
Control0..*
TypeAnnotation
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))