minimal Common Oncology Data Elements (mCODE) Implementation Guide
2.0.0 - STU 2
minimal Common Oncology Data Elements (mCODE) Implementation Guide
2.0.0 - STU 2
This page is part of the HL7 FHIR Implementation Guide: minimal Common Oncology Data Elements (mCODE) Release 1 - US Realm | STU1 (v2.0.0: STU 2) based on FHIR R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions 
Definitions for the mcode-radiotherapy-dose-delivered-to-volume extension.
| 1. Extension | |
| Definition | Dose delivered to a given radiotherapy volume. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 3. Extension.extension | |
| Definition | An Extension |
| Control | 1..* |
| Type | Extension |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 4. Extension.extension:volume | |
| SliceName | volume |
| Definition | A BodyStructure resource representing volume in the body where radiation was delivered, for example, Chest Wall Lymph Nodes. |
| Control | 1..1 |
| Type | Extension |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 5. Extension.extension:volume.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 6. Extension.extension:volume.extension | |
| Definition | An Extension |
| Control | 0..0 |
| Type | Extension |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 7. Extension.extension:volume.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | volume |
| 8. Extension.extension:volume.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 0..1 |
| Type | Reference(RadiotherapyVolume) |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 9. Extension.extension:totalDoseDelivered | |
| SliceName | totalDoseDelivered |
| Definition | The total amount of radiation delivered to this volume within the scope of this dose delivery, i.e., dose delivered from the Procedure in which this extension is used. |
| Control | 0..1 |
| Type | Extension |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 10. Extension.extension:totalDoseDelivered.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 11. Extension.extension:totalDoseDelivered.extension | |
| Definition | An Extension |
| Control | 0..0 |
| Type | Extension |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 12. Extension.extension:totalDoseDelivered.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | totalDoseDelivered |
| 13. Extension.extension:totalDoseDelivered.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 0..1 |
| Type | Quantity |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
|
| 14. Extension.extension:totalDoseDelivered.value[x]:valueQuantity | |
| SliceName | valueQuantity |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 0..1 |
| Type | Quantity |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Pattern Value | <valueQuantity xmlns="http://hl7.org/fhir"> <system value="http://unitsofmeasure.org"/> <code value="cGy"/> </valueQuantity> |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 15. Extension.extension:fractionsDelivered | |
| SliceName | fractionsDelivered |
| Definition | The number of fractions delivered to this volume. |
| Control | 0..1 |
| Type | Extension |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 16. Extension.extension:fractionsDelivered.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 17. Extension.extension:fractionsDelivered.extension | |
| Definition | An Extension |
| Control | 0..0 |
| Type | Extension |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 18. Extension.extension:fractionsDelivered.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | fractionsDelivered |
| 19. Extension.extension:fractionsDelivered.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 0..1 |
| Type | unsignedInt |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 20. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-dose-delivered-to-volume |
| 21. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
IG © 2019+ HL7 International Clinical Interoperability Council. Package hl7.fhir.us.mcode#2.0.0 based on FHIR 4.0.1. Generated 2022-01-18
Links: Table of Contents |
QA Report
| Version History |
Search |
|
Propose a change