HL7 FHIR® Implementation Guide: Electronic Case Reporting (eCR) - US Realm
2.1.2 - STU 2 United States of America flag

This page is part of the electronic Case Reporting (eCR) (v2.1.2: STU 2) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Extension: USPublicHealthAddressExtension - Detailed Descriptions

Active as of 2024-10-30

Definitions for the us-ph-address-extension extension.

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Where the patient traveled to or visited as an address e.g. country, city, street address if applicable. At least, address must contain the country.

ShortUS Public Health Address Extension
Control0..1
2. Extension.url
Fixed Valuehttp://hl7.org/fhir/us/ecr/StructureDefinition/us-ph-address-extension
4. Extension.value[x]
TypeAddress, date, Meta, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Must Supporttrue
6. Extension.value[x].use
Must Supporttrue
8. Extension.value[x].type
Must Supporttrue
10. Extension.value[x].line
Must Supporttrue
12. Extension.value[x].city
Must Supporttrue
14. Extension.value[x].district
Must Supporttrue
16. Extension.value[x].state
BindingThe codes SHOULD be taken from USPS Two Letter Alphabetic Codes
(preferred to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state)

USPS Two Letter Alphabetic Codes

Must Supporttrue
18. Extension.value[x].postalCode
Must Supporttrue
20. Extension.value[x].country
Control1..1
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Where the patient traveled to or visited as an address e.g. country, city, street address if applicable. At least, address must contain the country.


Optional Extension Element - found in all resources.

ShortUS Public Health Address ExtensionOptional Extensions Element
Control0..1*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/us/ecr/StructureDefinition/us-ph-address-extension
4. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
TypeAddress, date, Meta, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Extension.value[x].use
Definition

The purpose of this address.

Shorthome | work | temp | old | billing - purpose of this address
Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/address-use|4.0.1)

The use of an address.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Allows an appropriate address to be chosen from a list of many.

Example<br/><b>General</b>:home
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Extension.value[x].type
Definition

Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

Shortpostal | physical | both
Comments

The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).


The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

Control0..1
BindingThe codes SHALL be taken from AddressTypehttp://hl7.org/fhir/ValueSet/address-type|4.0.1
(required to http://hl7.org/fhir/ValueSet/address-type|4.0.1)

The type of an address (physical / postal).

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:both
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.value[x].line
Definition

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

ShortStreet name, number, direction & P.O. Box etc.
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:137 Nowhere Street
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Extension.value[x].city
Definition

The name of the city, town, suburb, village or other community or delivery center.

ShortName of city, town etc.
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesMunicpality
Example<br/><b>General</b>:Erewhon
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Extension.value[x].district
Definition

The name of the administrative area (county).

ShortDistrict name (aka county)
Comments

District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesCounty
Example<br/><b>General</b>:Madison
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.value[x].state
Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

ShortSub-unit of country (abbreviations ok)
Control0..1
BindingThe codes SHOULD be taken from For codes, see USPS Two Letter Alphabetic Codes
(preferred to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state)

USPS Two Letter Alphabetic Codes

Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesProvince, Territory
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Extension.value[x].postalCode
Definition

A postal code designating a region defined by the postal service.

ShortPostal code for area
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesZip
Example<br/><b>General</b>:9132
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Extension.value[x].country
Definition

Country - a nation as commonly understood or generally accepted.

ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Where the patient traveled to or visited as an address e.g. country, city, street address if applicable. At least, address must contain the country.

ShortUS Public Health Address Extension
Control0..1
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
4. Extension.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Extension.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttp://hl7.org/fhir/us/ecr/StructureDefinition/us-ph-address-extension
    8. Extension.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortValue of extension
    Control0..1
    TypeAddress
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Extension.value[x].id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    12. Extension.value[x].extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 14. Extension.value[x].use
      Definition

      The purpose of this address.

      Shorthome | work | temp | old | billing - purpose of this address
      Comments

      Applications can assume that an address is current unless it explicitly says that it is temporary or old.

      Control0..1
      BindingThe codes SHALL be taken from AddressUse
      (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1)

      The use of an address.

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Allows an appropriate address to be chosen from a list of many.

      Example<br/><b>General</b>:home
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Extension.value[x].type
      Definition

      Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

      Shortpostal | physical | both
      Comments

      The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

      Control0..1
      BindingThe codes SHALL be taken from AddressType
      (required to http://hl7.org/fhir/ValueSet/address-type|4.0.1)

      The type of an address (physical / postal).

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:both
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Extension.value[x].text
      Definition

      Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

      ShortText representation of the address
      Comments

      Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      A renderable, unencoded form.

      Example<br/><b>General</b>:137 Nowhere Street, Erewhon 9132
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Extension.value[x].line
      Definition

      This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

      ShortStreet name, number, direction & P.O. Box etc.
      Control0..*
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Example<br/><b>General</b>:137 Nowhere Street
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Extension.value[x].city
      Definition

      The name of the city, town, suburb, village or other community or delivery center.

      ShortName of city, town etc.
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate NamesMunicpality
      Example<br/><b>General</b>:Erewhon
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Extension.value[x].district
      Definition

      The name of the administrative area (county).

      ShortDistrict name (aka county)
      Comments

      District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate NamesCounty
      Example<br/><b>General</b>:Madison
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Extension.value[x].state
      Definition

      Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

      ShortSub-unit of country (abbreviations ok)
      Control0..1
      BindingThe codes SHOULD be taken from USPS Two Letter Alphabetic Codes
      (preferred to http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state)

      USPS Two Letter Alphabetic Codes

      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate NamesProvince, Territory
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Extension.value[x].postalCode
      Definition

      A postal code designating a region defined by the postal service.

      ShortPostal code for area
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Alternate NamesZip
      Example<br/><b>General</b>:9132
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Extension.value[x].country
      Definition

      Country - a nation as commonly understood or generally accepted.

      ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)
      Comments

      ISO 3166 3 letter codes can be used in place of a human readable country name.

      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Extension.value[x].period
      Definition

      Time period when address was/is in use.

      ShortTime period when address was/is in use
      Control0..1
      TypePeriod
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows addresses to be placed in historical context.

      Example<br/><b>General</b>:{ "start" : "2010-03-23", "end" : "2010-07-01" }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))