This page is part of the electronic Case Reporting (eCR) (v1.1.0: STU 2 on FHIR R4 Ballot 1) based on FHIR R4. The current version which supercedes this version is 2.1.0. For a full list of available versions, see the Directory of published versions
Definitions for the address-extension extension.
1. Extension | |
Definition | Where the patient traveled to or visited as an address e.g. country, city, street address if applicable. At the least, address must contain the country. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
2. Extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
3. Extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
4. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/us/ecr/StructureDefinition/address-extension |
5. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 0..1 |
Type | Address |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Must Support | true |
Example | for Address:<valueAddress xmlns="http://hl7.org/fhir"> <text value="Nadi FIJI"/> <city value="Nadi"/> <country value="FIJI"/> </valueAddress> |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
6. Extension.value[x].id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
7. Extension.value[x].extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.value[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
8. Extension.value[x].use | |
Definition | The purpose of this address. |
Control | 0..1 |
Binding | The codes SHALL be taken from AddressUse The use of an address. |
Type | code |
Is Modifier | true |
Must Support | true |
Requirements | Allows an appropriate address to be chosen from a list of many. |
Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old. |
Example | General:home |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
9. Extension.value[x].type | |
Definition | Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. |
Control | 0..1 |
Binding | The codes SHALL be taken from AddressType The type of an address (physical / postal). |
Type | code |
Must Support | true |
Comments | The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource). |
Example | General:both |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
10. Extension.value[x].text | |
Definition | Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts. |
Control | 0..1 |
Type | string |
Requirements | A renderable, unencoded form. |
Comments | Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. |
Example | General:137 Nowhere Street, Erewhon 9132 |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
11. Extension.value[x].line | |
Definition | This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information. |
Control | 0..* |
Type | string |
Must Support | true |
Example | General:137 Nowhere Street |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
12. Extension.value[x].city | |
Definition | The name of the city, town, suburb, village or other community or delivery center. |
Control | 0..1 |
Type | string |
Must Support | true |
Alternate Names | Municpality |
Example | General:Erewhon |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
13. Extension.value[x].district | |
Definition | The name of the administrative area (county). |
Control | 0..1 |
Type | string |
Must Support | true |
Alternate Names | County |
Comments | District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. |
Example | General:Madison |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
14. Extension.value[x].state | |
Definition | Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes). |
Control | 0..1 |
Binding | The codes SHOULD be taken from USPS Two Letter Alphabetic Codes United States Postal Service Two-Letter State and Possession Abbreviations |
Type | string |
Must Support | true |
Alternate Names | Province, Territory |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
15. Extension.value[x].postalCode | |
Definition | A postal code designating a region defined by the postal service. |
Control | 0..1 |
Type | string |
Must Support | true |
Alternate Names | Zip |
Example | General:9132 |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
16. Extension.value[x].country | |
Definition | Country - a nation as commonly understood or generally accepted. |
Control | 1..1 |
Type | string |
Must Support | true |
Comments | ISO 3166 3 letter codes can be used in place of a human readable country name. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
17. Extension.value[x].period | |
Definition | Time period when address was/is in use. |
Control | 0..1 |
Type | Period |
Requirements | Allows addresses to be placed in historical context. |
Example | General:<valuePeriod xmlns="http://hl7.org/fhir"> <start value="2010-03-23"/> <end value="2010-07-01"/> </valuePeriod> |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |