Da Vinci Health Record Exchange (HRex)
1.1.0 - STU 1.1 United States of America flag

This page is part of the Da Vinci Health Record Exchange (v1.1.0: STU 1.1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: HRexConsent - Detailed Descriptions

Page standards status: Draft Maturity Level: 0

Definitions for the hrex-consent resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Consent
Definition

This Consent profile conveys high-level computable information about a member's consent for information sharing, along with information that allows a party depending on the consent to follow up with the consent holder to access the 'original' consent, be it in paper form, audio recording or electronic for audit purposes.

2. Consent.status
Must Supporttrue
Fixed Valueactive
4. Consent.scope
Must Supporttrue
Pattern Value{
  "coding" : [{
    "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
    "code" : "patient-privacy"
  }]
}
6. Consent.category
SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
  • 8. Consent.category:disclosure
    Slice Namedisclosure
    Control1..1
    Must Supporttrue
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
        "code" : "IDSCL"
      }]
    }
    10. Consent.patient
    Control1..?
    TypeReference(US Core Patient Profile)
    Must Supporttrue
    12. Consent.performer
    Control1..1
    TypeReference(US Core Patient Profile, RelatedPerson, US Core Practitioner Profile, HRex PractitionerRole Profile, HRex Organization Profile)
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    14. Consent.source[x]
    Comments

    ...Allows referencing the 'source of truth' for the Consent. This might be a detailed electronic consent, an audio recording of a verbal consent, or an identifier that can be used to follow up for audit.

    Control1..?
    TypeReference(DocumentReference), Attachment
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    16. Consent.policy
    Control1..?
    SlicingThis element introduces a set of slices on Consent.policy. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ uri
    • 18. Consent.policy:hrex
      Slice Namehrex
      Control1..1
      Must Supporttrue
      20. Consent.policy:hrex.uri
      Control1..?
      BindingThe codes SHALL be taken from HRex Consent Policy ValueSet
      (required to http://hl7.org/fhir/us/davinci-hrex/ValueSet/hrex-consent-policy)
      Must Supporttrue
      22. Consent.provision
      Control1..?
      Must Supporttrue
      24. Consent.provision.type
      Control1..?
      Must Supporttrue
      Fixed Valuepermit
      26. Consent.provision.period
      Control1..?
      Must Supporttrue
      28. Consent.provision.period.start
      Control1..?
      Must Supporttrue
      30. Consent.provision.period.end
      Control1..?
      Must Supporttrue
      32. Consent.provision.actor
      Control2..?
      SlicingThis element introduces a set of slices on Consent.provision.actor. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ role
      • 34. Consent.provision.actor:source
        Slice Namesource
        ShortAuthorized to disclose
        Comments

        Multiple repetitions are allowed. At least one repetition SHALL refer to the target payer's organization. If the consent is bidirectional, then the source system's organization would also be listed.

        Control1..*
        Must Supporttrue
        36. Consent.provision.actor:source.role
        Comments

        This code isn't in the value set, but there's no code that represents the function of 'discloser' or 'performer', so need to go outside the value set. Multiple

        Must Supporttrue
        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/provenance-participant-type",
            "code" : "performer"
          }]
        }
        38. Consent.provision.actor:source.reference
        TypeReference(HRex Organization Profile)
        Must Supporttrue
        40. Consent.provision.actor:recipient
        Slice Namerecipient
        ShortAuthorized to receive information
        Comments

        Multiple repetitions are allowed. At least one repetition SHALL refer to the requesting system's organization. If the consent is bidirectional, then the target payer's organization would also be listed.

        Control1..*
        Must Supporttrue
        42. Consent.provision.actor:recipient.role
        Comments

        ...The code chosen doesn't strictly have the desired semantics, but of the ones in the value set it is closest and has the needed level of generality.

        Must Supporttrue
        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/v3-ParticipationType",
            "code" : "IRCP"
          }]
        }
        44. Consent.provision.actor:recipient.reference
        TypeReference(HRex Organization Profile)
        Must Supporttrue
        46. Consent.provision.action
        Control1..1
        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/consentaction",
            "code" : "disclose"
          }]
        }
        48. Consent.provision.securityLabel
        Control0..0
        Requirements

        Further constraining disclosure based on securityLabel is prohibited. Consent rules are expressed solely in policy.

        50. Consent.provision.purpose
        Control0..0
        Requirements

        Further constraining disclosure based on purpose of use is prohibited. Consent rules are expressed solely in policy.

        52. Consent.provision.class
        Control0..0
        Requirements

        Further constraining disclosure based on information class is prohibited. Consent rules are expressed solely in policy.

        54. Consent.provision.code
        Control0..0
        Requirements

        Further constraining disclosure based on information type of use is prohibited. Consent rules are expressed solely in policy.

        56. Consent.provision.dataPeriod
        Control0..0
        Requirements

        Further constraining disclosure based on data period is prohibited. Consent rules are expressed solely in policy.

        58. Consent.provision.data
        Control0..0
        Requirements

        Further constraining disclosure based on data constraints is prohibited. Consent rules are expressed solely in policy.

        60. Consent.provision.provision
        Control0..0
        Requirements

        Further constraining disclosure based on nested provisions is prohibited. Consent rules are expressed solely in policy.

        Guidance on how to interpret the contents of this table can be found here

        0. Consent
        Definition

        This Consent profile conveys high-level computable information about a member's consent for information sharing, along with information that allows a party depending on the consent to follow up with the consent holder to access the 'original' consent, be it in paper form, audio recording or electronic for audit purposes.


        A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

        ShortA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
        Comments

        Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

        Control0..*
        Is Modifierfalse
        Summaryfalse
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
        ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
        ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
        ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
        ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
        ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
        ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
        ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
        ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
        ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
        2. Consent.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        4. Consent.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        6. Consent.status
        Definition

        Indicates the current state of this consent.

        Shortdraft | proposed | active | rejected | inactive | entered-in-error
        Comments

        This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from ConsentStatehttp://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1
        (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

        Indicates the state of the consent.

        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

        Fixed Valueactive
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Consent.scope
        Definition

        A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

        ShortWhich of the four areas this resource covers (extensible)
        Control1..1
        BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodeshttp://hl7.org/fhir/ValueSet/consent-scope
        (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

        The four anticipated uses for the Consent Resource.

        TypeCodeableConcept
        Is Modifiertrue because Allows changes to codes based on scope selection
        Must Supporttrue
        Summarytrue
        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
            "code" : "patient-privacy"
          }]
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Consent.category
        Definition

        A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

        ShortClassification of the consent statement - for indexing/retrieval
        Control1..*
        BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodeshttp://hl7.org/fhir/ValueSet/consent-category
        (extensible to http://hl7.org/fhir/ValueSet/consent-category)

        A classification of the type of consents found in a consent statement.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ $this
        • 12. Consent.category:disclosure
          Slice Namedisclosure
          Definition

          A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

          ShortClassification of the consent statement - for indexing/retrieval
          Control1..1*
          BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodeshttp://hl7.org/fhir/ValueSet/consent-category
          (extensible to http://hl7.org/fhir/ValueSet/consent-category)

          A classification of the type of consents found in a consent statement.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Pattern Value{
            "coding" : [{
              "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
              "code" : "IDSCL"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          14. Consent.patient
          Definition

          The patient/healthcare consumer to whom this consent applies.

          ShortWho the consent applies to
          Comments

          Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

          Control10..1
          TypeReference(US Core Patient Profile, Patient)
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          16. Consent.performer
          Definition

          Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

          ShortWho is agreeing to the policy and rules
          Comments

          Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

          Control10..1*
          TypeReference(US Core Patient Profile, RelatedPerson, US Core Practitioner Profile, HRex PractitionerRole Profile, HRex Organization Profile, Organization, Patient, Practitioner, PractitionerRole)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesNo must-support rules about the choice of types/profiles
          Summarytrue
          Alternate Namesconsentor
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          18. Consent.source[x]
          Definition

          The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

          ShortSource from which this consent is taken
          Comments

          The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id. Allows referencing the 'source of truth' for the Consent. This might be a detailed electronic consent, an audio recording of a verbal consent, or an identifier that can be used to follow up for audit.


          The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

          Control10..1
          TypeReference(DocumentReference, Consent, Contract, QuestionnaireResponse), Attachment
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          20. Consent.policy
          Definition

          The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

          ShortPolicies covered by this consent
          Control10..*
          TypeBackboneElement
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Consent.policy. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ uri
          • 22. Consent.policy.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            24. Consent.policy:hrex
            Slice Namehrex
            Definition

            The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

            ShortPolicies covered by this consent
            Control10..1*
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Consent.policy:hrex.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            28. Consent.policy:hrex.uri
            Definition

            The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

            ShortSpecific policy covered by this consent
            Comments

            This element is for discoverability / documentation and does not modify or qualify the policy rules.

            Control10..1
            This element is affected by the following invariants: ppc-1
            BindingThe codes SHALL be taken from For codes, see HRex Consent Policy ValueSet
            (required to http://hl7.org/fhir/us/davinci-hrex/ValueSet/hrex-consent-policy)
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. Consent.provision
            Definition

            An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

            ShortConstraints to the base Consent.policyRule
            Control10..1
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. Consent.provision.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            34. Consent.provision.type
            Definition

            Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

            Shortdeny | permit
            Control10..1
            BindingThe codes SHALL be taken from ConsentProvisionTypehttp://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1
            (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

            How a rule statement is applied, such as adding additional consent or removing consent.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Fixed Valuepermit
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            36. Consent.provision.period
            Definition

            The timeframe in this rule is valid.

            ShortTimeframe for this rule
            Control10..1
            TypePeriod
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            38. Consent.provision.period.start
            Definition

            The start of the period. The boundary is inclusive.

            ShortStarting time with inclusive boundary
            Comments

            If the low element is missing, the meaning is that the low boundary is not known.

            Control10..1
            This element is affected by the following invariants: per-1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. Consent.provision.period.end
            Definition

            The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

            ShortEnd time with inclusive boundary, if not ongoing
            Comments

            The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

            Control10..1
            This element is affected by the following invariants: per-1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. Consent.provision.actor
            Definition

            Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

            ShortWho|what controlled by this rule (or group, by role)
            Control20..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Meaning if MissingThere is no specific actor associated with the exception
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Consent.provision.actor. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ role
            • 44. Consent.provision.actor.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              46. Consent.provision.actor.role
              Definition

              How the individual is involved in the resources content that is described in the exception.

              ShortHow the actor is involved
              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from SecurityRoleTypehttp://hl7.org/fhir/ValueSet/security-role-type
              (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

              How an actor is involved in the consent considerations.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. Consent.provision.actor.reference
              Definition

              The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

              ShortResource for the actor (or group, by role)
              Control1..1
              TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. Consent.provision.actor:source
              Slice Namesource
              Definition

              Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

              ShortAuthorized to discloseWho|what controlled by this rule (or group, by role)
              Comments

              Multiple repetitions are allowed. At least one repetition SHALL refer to the target payer's organization. If the consent is bidirectional, then the source system's organization would also be listed.

              Control10..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Meaning if MissingThere is no specific actor associated with the exception
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. Consent.provision.actor:source.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              54. Consent.provision.actor:source.role
              Definition

              How the individual is involved in the resources content that is described in the exception.

              ShortHow the actor is involved
              Comments

              This code isn't in the value set, but there's no code that represents the function of 'discloser' or 'performer', so need to go outside the value set. Multiple

              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from SecurityRoleTypehttp://hl7.org/fhir/ValueSet/security-role-type
              (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

              How an actor is involved in the consent considerations.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Pattern Value{
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/provenance-participant-type",
                  "code" : "performer"
                }]
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Consent.provision.actor:source.reference
              Definition

              The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

              ShortResource for the actor (or group, by role)
              Control1..1
              TypeReference(HRex Organization Profile, Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. Consent.provision.actor:recipient
              Slice Namerecipient
              Definition

              Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

              ShortAuthorized to receive informationWho|what controlled by this rule (or group, by role)
              Comments

              Multiple repetitions are allowed. At least one repetition SHALL refer to the requesting system's organization. If the consent is bidirectional, then the target payer's organization would also be listed.

              Control10..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Meaning if MissingThere is no specific actor associated with the exception
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. Consent.provision.actor:recipient.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              62. Consent.provision.actor:recipient.role
              Definition

              How the individual is involved in the resources content that is described in the exception.

              ShortHow the actor is involved
              Comments

              The code chosen doesn't strictly have the desired semantics, but of the ones in the value set it is closest and has the needed level of generality.

              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from SecurityRoleTypehttp://hl7.org/fhir/ValueSet/security-role-type
              (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

              How an actor is involved in the consent considerations.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Pattern Value{
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/v3-ParticipationType",
                  "code" : "IRCP"
                }]
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              64. Consent.provision.actor:recipient.reference
              Definition

              The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

              ShortResource for the actor (or group, by role)
              Control1..1
              TypeReference(HRex Organization Profile, Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              66. Consent.provision.action
              Definition

              Actions controlled by this Rule.

              ShortActions controlled by this rule
              Comments

              Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

              Control10..1*
              BindingFor example codes, see ConsentActionCodeshttp://hl7.org/fhir/ValueSet/consent-action
              (example to http://hl7.org/fhir/ValueSet/consent-action)

              Detailed codes for the consent action.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Meaning if Missingall actions
              Pattern Value{
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/consentaction",
                  "code" : "disclose"
                }]
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              68. Consent.provision.securityLabel
              Definition

              A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception.

              ShortSecurity Labels that define affected resources
              Comments

              If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict.

              Control0..0*
              BindingUnless not suitable, these codes SHALL be taken from All Security Labelshttp://hl7.org/fhir/ValueSet/security-labels
              (extensible to http://hl7.org/fhir/ValueSet/security-labels)

              Security Labels from the Healthcare Privacy and Security Classification System.

              TypeCoding
              Is Modifierfalse
              Summarytrue
              Requirements

              Further constraining disclosure based on securityLabel is prohibited. Consent rules are expressed solely in policy.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              70. Consent.provision.purpose
              Definition

              The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule.

              ShortContext of activities covered by this rule
              Comments

              When the purpose of use tag is on the data, access request purpose of use shall not conflict.

              Control0..0*
              BindingUnless not suitable, these codes SHALL be taken from PurposeOfUsehttp://terminology.hl7.org/ValueSet/v3-PurposeOfUse
              (extensible to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

              What purposes of use are controlled by this exception. If more than one label is specified, operations must have all the specified labels.

              TypeCoding
              Is Modifierfalse
              Summarytrue
              Requirements

              Further constraining disclosure based on purpose of use is prohibited. Consent rules are expressed solely in policy.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              72. Consent.provision.class
              Definition

              The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to.

              Shorte.g. Resource Type, Profile, CDA, etc.
              Comments

              Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere.

              Control0..0*
              BindingUnless not suitable, these codes SHALL be taken from ConsentContentClasshttp://hl7.org/fhir/ValueSet/consent-content-class
              (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

              The class (type) of information a consent rule covers.

              TypeCoding
              Is Modifierfalse
              Summarytrue
              Requirements

              Further constraining disclosure based on information class is prohibited. Consent rules are expressed solely in policy.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. Consent.provision.code
              Definition

              If this code is found in an instance, then the rule applies.

              Shorte.g. LOINC or SNOMED CT code, etc. in the content
              Comments

              Typical use of this is a Document code with class = CDA.

              Control0..0*
              BindingFor example codes, see ConsentContentCodeshttp://hl7.org/fhir/ValueSet/consent-content-code
              (example to http://hl7.org/fhir/ValueSet/consent-content-code)

              If this code is found in an instance, then the exception applies.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Further constraining disclosure based on information type of use is prohibited. Consent rules are expressed solely in policy.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. Consent.provision.dataPeriod
              Definition

              Clinical or Operational Relevant period of time that bounds the data controlled by this rule.

              ShortTimeframe for data controlled by this rule
              Comments

              This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement.

              Control0..01
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Requirements

              Further constraining disclosure based on data period is prohibited. Consent rules are expressed solely in policy.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              78. Consent.provision.data
              Definition

              The resources controlled by this rule if specific resources are referenced.

              ShortData controlled by this rule
              Control0..0*
              TypeBackboneElement
              Is Modifierfalse
              Summarytrue
              Requirements

              Further constraining disclosure based on data constraints is prohibited. Consent rules are expressed solely in policy.

              Meaning if Missingall data
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              83. Consent.provision.provision
              Definition

              Rules which provide exceptions to the base rule or subrules.

              ShortNested Exception Rules
              Control0..0*
              TypeSeettp://hl7.org/fhir/StructureDefinition/Consent#Consent.provision
              Is Modifierfalse
              Summaryfalse
              Requirements

              Further constraining disclosure based on nested provisions is prohibited. Consent rules are expressed solely in policy.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

              Guidance on how to interpret the contents of this table can be found here

              0. Consent
              Definition

              This Consent profile conveys high-level computable information about a member's consent for information sharing, along with information that allows a party depending on the consent to follow up with the consent holder to access the 'original' consent, be it in paper form, audio recording or electronic for audit purposes.

              ShortA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
              Comments

              Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

              Control0..*
              Is Modifierfalse
              Summaryfalse
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
              ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
              ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
              ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
              ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
              2. Consent.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

              Control0..1
              Typeid
              Is Modifierfalse
              Summarytrue
              4. Consent.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Consent.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. Consent.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHOULD be taken from CommonLanguages
              (preferred to http://hl7.org/fhir/ValueSet/languages)

              A human language.

              Additional BindingsPurpose
              AllLanguagesMax Binding
              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. Consent.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              TypeNarrative
              Is Modifierfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. Consent.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

              Control0..*
              TypeResource
              Is Modifierfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. Consent.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              16. Consent.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Summaryfalse
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. Consent.identifier
              Definition

              Unique identifier for this copy of the Consent Statement.

              ShortIdentifier for this record (external references)
              Comments

              This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Is Modifierfalse
              Summarytrue
              Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. Consent.status
              Definition

              Indicates the current state of this consent.

              Shortdraft | proposed | active | rejected | inactive | entered-in-error
              Comments

              This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

              Control1..1
              BindingThe codes SHALL be taken from ConsentState
              (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

              Indicates the state of the consent.

              Typecode
              Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Requirements

              The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

              Fixed Valueactive
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              22. Consent.scope
              Definition

              A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

              ShortWhich of the four areas this resource covers (extensible)
              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodes
              (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

              The four anticipated uses for the Consent Resource.

              TypeCodeableConcept
              Is Modifiertrue because Allows changes to codes based on scope selection
              Must Supporttrue
              Summarytrue
              Pattern Value{
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
                  "code" : "patient-privacy"
                }]
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              24. Consent.category
              Definition

              A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

              ShortClassification of the consent statement - for indexing/retrieval
              Control1..*
              BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodes
              (extensible to http://hl7.org/fhir/ValueSet/consent-category)

              A classification of the type of consents found in a consent statement.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ $this
              • 26. Consent.category:disclosure
                Slice Namedisclosure
                Definition

                A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

                ShortClassification of the consent statement - for indexing/retrieval
                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodes
                (extensible to http://hl7.org/fhir/ValueSet/consent-category)

                A classification of the type of consents found in a consent statement.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Pattern Value{
                  "coding" : [{
                    "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
                    "code" : "IDSCL"
                  }]
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Consent.patient
                Definition

                The patient/healthcare consumer to whom this consent applies.

                ShortWho the consent applies to
                Comments

                Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

                Control1..1
                TypeReference(US Core Patient Profile)
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. Consent.dateTime
                Definition

                When this Consent was issued / created / indexed.

                ShortWhen this Consent was created or indexed
                Comments

                This is not the time of the original consent, but the time that this statement was made or derived.

                Control0..1
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                32. Consent.performer
                Definition

                Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

                ShortWho is agreeing to the policy and rules
                Comments

                Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

                Control1..1
                TypeReference(US Core Patient Profile, RelatedPerson, US Core Practitioner Profile, HRex PractitionerRole Profile, HRex Organization Profile)
                Is Modifierfalse
                Must Supporttrue
                Must Support TypesNo must-support rules about the choice of types/profiles
                Summarytrue
                Alternate Namesconsentor
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                34. Consent.organization
                Definition

                The organization that manages the consent, and the framework within which it is executed.

                ShortCustodian of the consent
                Control0..*
                TypeReference(Organization)
                Is Modifierfalse
                Summarytrue
                Alternate Namescustodian
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                36. Consent.source[x]
                Definition

                The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

                ShortSource from which this consent is taken
                Comments

                The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id. Allows referencing the 'source of truth' for the Consent. This might be a detailed electronic consent, an audio recording of a verbal consent, or an identifier that can be used to follow up for audit.

                Control1..1
                TypeReference(DocumentReference)
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                38. Consent.policy
                Definition

                The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

                ShortPolicies covered by this consent
                Control1..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Consent.policy. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ uri
                • 40. Consent.policy.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  42. Consent.policy.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  44. Consent.policy.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  46. Consent.policy.authority
                  Definition

                  Entity or Organization having regulatory jurisdiction or accountability for enforcing policies pertaining to Consent Directives.

                  ShortEnforcement source for policy
                  Control0..1
                  This element is affected by the following invariants: ppc-1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  48. Consent.policy.uri
                  Definition

                  The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

                  ShortSpecific policy covered by this consent
                  Comments

                  This element is for discoverability / documentation and does not modify or qualify the policy rules.

                  Control0..1
                  This element is affected by the following invariants: ppc-1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  50. Consent.policy:hrex
                  Slice Namehrex
                  Definition

                  The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

                  ShortPolicies covered by this consent
                  Control1..1
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supporttrue
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  52. Consent.policy:hrex.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  54. Consent.policy:hrex.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  56. Consent.policy:hrex.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  58. Consent.policy:hrex.authority
                  Definition

                  Entity or Organization having regulatory jurisdiction or accountability for enforcing policies pertaining to Consent Directives.

                  ShortEnforcement source for policy
                  Control0..1
                  This element is affected by the following invariants: ppc-1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  60. Consent.policy:hrex.uri
                  Definition

                  The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

                  ShortSpecific policy covered by this consent
                  Comments

                  This element is for discoverability / documentation and does not modify or qualify the policy rules.

                  Control1..1
                  This element is affected by the following invariants: ppc-1
                  BindingThe codes SHALL be taken from HRex Consent Policy ValueSet
                  (required to http://hl7.org/fhir/us/davinci-hrex/ValueSet/hrex-consent-policy)
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  62. Consent.policyRule
                  Definition

                  A reference to the specific base computable regulation or policy.

                  ShortRegulation that this consents to
                  Comments

                  If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

                  Control0..1
                  This element is affected by the following invariants: ppc-1
                  BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodes
                  (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

                  Regulatory policy examples.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Might be a unique identifier of a policy set in XACML, or other rules engine.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  64. Consent.verification
                  Definition

                  Whether a treatment instruction (e.g. artificial respiration yes or no) was verified with the patient, his/her family or another authorized person.

                  ShortConsent Verified by patient or family
                  Control0..*
                  TypeBackboneElement
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  66. Consent.verification.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  68. Consent.verification.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  70. Consent.verification.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  72. Consent.verification.verified
                  Definition

                  Has the instruction been verified.

                  ShortHas been verified
                  Control1..1
                  Typeboolean
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. Consent.verification.verifiedWith
                  Definition

                  Who verified the instruction (Patient, Relative or other Authorized Person).

                  ShortPerson who verified
                  Control0..1
                  TypeReference(Patient, RelatedPerson)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  76. Consent.verification.verificationDate
                  Definition

                  Date verification was collected.

                  ShortWhen consent verified
                  Control0..1
                  TypedateTime
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  78. Consent.provision
                  Definition

                  An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

                  ShortConstraints to the base Consent.policyRule
                  Control1..1
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supporttrue
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  80. Consent.provision.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  82. Consent.provision.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  84. Consent.provision.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  86. Consent.provision.type
                  Definition

                  Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

                  Shortdeny | permit
                  Control1..1
                  BindingThe codes SHALL be taken from ConsentProvisionType
                  (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

                  How a rule statement is applied, such as adding additional consent or removing consent.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Fixed Valuepermit
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  88. Consent.provision.period
                  Definition

                  The timeframe in this rule is valid.

                  ShortTimeframe for this rule
                  Control1..1
                  TypePeriod
                  Is Modifierfalse
                  Must Supporttrue
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  90. Consent.provision.period.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  92. Consent.provision.period.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Consent.provision.period.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 94. Consent.provision.period.start
                    Definition

                    The start of the period. The boundary is inclusive.

                    ShortStarting time with inclusive boundary
                    Comments

                    If the low element is missing, the meaning is that the low boundary is not known.

                    Control1..1
                    This element is affected by the following invariants: per-1
                    TypedateTime
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    96. Consent.provision.period.end
                    Definition

                    The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

                    ShortEnd time with inclusive boundary, if not ongoing
                    Comments

                    The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

                    Control1..1
                    This element is affected by the following invariants: per-1
                    TypedateTime
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    98. Consent.provision.actor
                    Definition

                    Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                    ShortWho|what controlled by this rule (or group, by role)
                    Control2..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Summaryfalse
                    Meaning if MissingThere is no specific actor associated with the exception
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Consent.provision.actor. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ role
                    • 100. Consent.provision.actor.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      102. Consent.provision.actor.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      104. Consent.provision.actor.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      106. Consent.provision.actor.role
                      Definition

                      How the individual is involved in the resources content that is described in the exception.

                      ShortHow the actor is involved
                      Control1..1
                      BindingUnless not suitable, these codes SHALL be taken from SecurityRoleType
                      (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

                      How an actor is involved in the consent considerations.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      108. Consent.provision.actor.reference
                      Definition

                      The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                      ShortResource for the actor (or group, by role)
                      Control1..1
                      TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      110. Consent.provision.actor:source
                      Slice Namesource
                      Definition

                      Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                      ShortAuthorized to disclose
                      Comments

                      Multiple repetitions are allowed. At least one repetition SHALL refer to the target payer's organization. If the consent is bidirectional, then the source system's organization would also be listed.

                      Control1..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Meaning if MissingThere is no specific actor associated with the exception
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      112. Consent.provision.actor:source.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      114. Consent.provision.actor:source.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      116. Consent.provision.actor:source.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      118. Consent.provision.actor:source.role
                      Definition

                      How the individual is involved in the resources content that is described in the exception.

                      ShortHow the actor is involved
                      Comments

                      This code isn't in the value set, but there's no code that represents the function of 'discloser' or 'performer', so need to go outside the value set. Multiple

                      Control1..1
                      BindingUnless not suitable, these codes SHALL be taken from SecurityRoleType
                      (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

                      How an actor is involved in the consent considerations.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Pattern Value{
                        "coding" : [{
                          "system" : "http://terminology.hl7.org/CodeSystem/provenance-participant-type",
                          "code" : "performer"
                        }]
                      }
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      120. Consent.provision.actor:source.reference
                      Definition

                      The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                      ShortResource for the actor (or group, by role)
                      Control1..1
                      TypeReference(HRex Organization Profile)
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      122. Consent.provision.actor:recipient
                      Slice Namerecipient
                      Definition

                      Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                      ShortAuthorized to receive information
                      Comments

                      Multiple repetitions are allowed. At least one repetition SHALL refer to the requesting system's organization. If the consent is bidirectional, then the target payer's organization would also be listed.

                      Control1..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Meaning if MissingThere is no specific actor associated with the exception
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      124. Consent.provision.actor:recipient.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      126. Consent.provision.actor:recipient.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      128. Consent.provision.actor:recipient.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      130. Consent.provision.actor:recipient.role
                      Definition

                      How the individual is involved in the resources content that is described in the exception.

                      ShortHow the actor is involved
                      Comments

                      The code chosen doesn't strictly have the desired semantics, but of the ones in the value set it is closest and has the needed level of generality.

                      Control1..1
                      BindingUnless not suitable, these codes SHALL be taken from SecurityRoleType
                      (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

                      How an actor is involved in the consent considerations.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Pattern Value{
                        "coding" : [{
                          "system" : "http://terminology.hl7.org/CodeSystem/v3-ParticipationType",
                          "code" : "IRCP"
                        }]
                      }
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      132. Consent.provision.actor:recipient.reference
                      Definition

                      The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                      ShortResource for the actor (or group, by role)
                      Control1..1
                      TypeReference(HRex Organization Profile)
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      134. Consent.provision.action
                      Definition

                      Actions controlled by this Rule.

                      ShortActions controlled by this rule
                      Comments

                      Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

                      Control1..1
                      BindingFor example codes, see ConsentActionCodes
                      (example to http://hl7.org/fhir/ValueSet/consent-action)

                      Detailed codes for the consent action.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Meaning if Missingall actions
                      Pattern Value{
                        "coding" : [{
                          "system" : "http://terminology.hl7.org/CodeSystem/consentaction",
                          "code" : "disclose"
                        }]
                      }
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      136. Consent.provision.securityLabel
                      Definition

                      A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception.

                      ShortSecurity Labels that define affected resources
                      Comments

                      If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict.

                      Control0..0
                      BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                      (extensible to http://hl7.org/fhir/ValueSet/security-labels)

                      Security Labels from the Healthcare Privacy and Security Classification System.

                      TypeCoding
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Further constraining disclosure based on securityLabel is prohibited. Consent rules are expressed solely in policy.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      138. Consent.provision.purpose
                      Definition

                      The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule.

                      ShortContext of activities covered by this rule
                      Comments

                      When the purpose of use tag is on the data, access request purpose of use shall not conflict.

                      Control0..0
                      BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse
                      (extensible to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

                      What purposes of use are controlled by this exception. If more than one label is specified, operations must have all the specified labels.

                      TypeCoding
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Further constraining disclosure based on purpose of use is prohibited. Consent rules are expressed solely in policy.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      140. Consent.provision.class
                      Definition

                      The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to.

                      Shorte.g. Resource Type, Profile, CDA, etc.
                      Comments

                      Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere.

                      Control0..0
                      BindingUnless not suitable, these codes SHALL be taken from ConsentContentClass
                      (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

                      The class (type) of information a consent rule covers.

                      TypeCoding
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Further constraining disclosure based on information class is prohibited. Consent rules are expressed solely in policy.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      142. Consent.provision.code
                      Definition

                      If this code is found in an instance, then the rule applies.

                      Shorte.g. LOINC or SNOMED CT code, etc. in the content
                      Comments

                      Typical use of this is a Document code with class = CDA.

                      Control0..0
                      BindingFor example codes, see ConsentContentCodes
                      (example to http://hl7.org/fhir/ValueSet/consent-content-code)

                      If this code is found in an instance, then the exception applies.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Further constraining disclosure based on information type of use is prohibited. Consent rules are expressed solely in policy.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      144. Consent.provision.dataPeriod
                      Definition

                      Clinical or Operational Relevant period of time that bounds the data controlled by this rule.

                      ShortTimeframe for data controlled by this rule
                      Comments

                      This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement.

                      Control0..0
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Further constraining disclosure based on data period is prohibited. Consent rules are expressed solely in policy.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      146. Consent.provision.data
                      Definition

                      The resources controlled by this rule if specific resources are referenced.

                      ShortData controlled by this rule
                      Control0..0
                      TypeBackboneElement
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Further constraining disclosure based on data constraints is prohibited. Consent rules are expressed solely in policy.

                      Meaning if Missingall data
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      153. Consent.provision.provision
                      Definition

                      Rules which provide exceptions to the base rule or subrules.

                      ShortNested Exception Rules
                      Control0..0
                      TypeSeettp://hl7.org/fhir/StructureDefinition/Consent#Consent.provision
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Further constraining disclosure based on nested provisions is prohibited. Consent rules are expressed solely in policy.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))