This page is part of the Documentation Templates and Rules (v2.1.0: STU 2.1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions
Page standards status: Trial-use | Maturity Level: 2 |
Definitions for the information-origin extension.
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Identifies the origin of the information in the answer and how it came to exist. Optional Extension Element - found in all resources. |
Short | ExtensionOptional Extensions Element |
Control | 0..* This element is affected by the following invariants: ele-1 |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )dtrx-1: If source is 'override' or 'manual' then an author SHALL be supplied, otherwise author is prohibited. ( extension.exists(url = 'source' and value = 'auto') != extension.exists(url = 'author') )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
2. Extension.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 10..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
4. Extension.extension:source | |
Slice Name | source |
Definition | The origination of information |
Short | The origination of informationAdditional content defined by implementations |
Control | 10..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. Extension.extension:source.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
8. Extension.extension:source.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | source |
10. Extension.extension:source.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | auto | override | manualValue of extension |
Control | 10..1 |
Binding | Unless not suitable, these codes SHALL be taken from For codes, see Information Origins Value Set (extensible to http://hl7.org/fhir/us/davinci-dtr/ValueSet/informationOrigins ) |
Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Extension.extension:author | |
Slice Name | author |
Definition | The author of the information adjustment |
Short | The author of the information adjustmentAdditional content defined by implementations |
Control | 0..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
14. Extension.extension:author.extension:role | |
Slice Name | role |
Definition | The role of the final human who authored the information adjustment |
Short | The role of the final human who authored the information adjustmentAdditional content defined by implementations |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
16. Extension.extension:author.extension:role.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
18. Extension.extension:author.extension:role.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | role |
20. Extension.extension:author.extension:role.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 |
Binding | Unless not suitable, these codes SHALL be taken from For codes, see US Core Provider Role (NUCC) (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-provider-role ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. Extension.extension:author.extension:practitioner | |
Slice Name | practitioner |
Definition | The final practitioner who authored the information adjustment |
Short | The final practitioner who authored the information adjustmentAdditional content defined by implementations |
Control | 0..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
24. Extension.extension:author.extension:practitioner.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
26. Extension.extension:author.extension:practitioner.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | practitioner |
28. Extension.extension:author.extension:practitioner.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 |
Type | Reference(US Core Practitioner Profile), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
30. Extension.extension:author.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | author |
32. Extension.extension:author.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..01 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
34. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/us/davinci-dtr/StructureDefinition/information-origin |
36. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..01 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Identifies the origin of the information in the answer and how it came to exist. |
Invariants | dtrx-1: If source is 'override' or 'manual' then an author SHALL be supplied, otherwise author is prohibited. (extension.exists(url = 'source' and value = 'auto') != extension.exists(url = 'author') ) |
2. Extension.extension | |
Control | 1..? |
4. Extension.extension:source | |
Slice Name | source |
Definition | The origination of information |
Short | The origination of information |
Control | 1..1 |
6. Extension.extension:source.extension | |
Control | 0..0 |
8. Extension.extension:source.url | |
Fixed Value | source |
10. Extension.extension:source.value[x] | |
Short | auto | override | manual |
Control | 1..? |
Binding | Unless not suitable, these codes SHALL be taken from Information Origins Value Set (extensible to http://hl7.org/fhir/us/davinci-dtr/ValueSet/informationOrigins ) |
Type | code |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
12. Extension.extension:author | |
Slice Name | author |
Definition | The author of the information adjustment |
Short | The author of the information adjustment |
Control | 0..1 |
14. Extension.extension:author.extension:role | |
Slice Name | role |
Definition | The role of the final human who authored the information adjustment |
Short | The role of the final human who authored the information adjustment |
Control | 0..* |
16. Extension.extension:author.extension:role.extension | |
Control | 0..0 |
18. Extension.extension:author.extension:role.url | |
Fixed Value | role |
20. Extension.extension:author.extension:role.value[x] | |
Control | 1..? |
Binding | Unless not suitable, these codes SHALL be taken from US Core Provider Role (NUCC) (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-provider-role ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
22. Extension.extension:author.extension:practitioner | |
Slice Name | practitioner |
Definition | The final practitioner who authored the information adjustment |
Short | The final practitioner who authored the information adjustment |
Control | 0..1 |
24. Extension.extension:author.extension:practitioner.extension | |
Control | 0..0 |
26. Extension.extension:author.extension:practitioner.url | |
Fixed Value | practitioner |
28. Extension.extension:author.extension:practitioner.value[x] | |
Control | 1..? |
Type | Reference(US Core Practitioner Profile) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
30. Extension.extension:author.url | |
Fixed Value | author |
32. Extension.extension:author.value[x] | |
Control | 0..0 |
34. Extension.url | |
Fixed Value | http://hl7.org/fhir/us/davinci-dtr/StructureDefinition/information-origin |
36. Extension.value[x] | |
Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Identifies the origin of the information in the answer and how it came to exist. |
Short | Extension |
Control | 0..* This element is affected by the following invariants: ele-1 |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )dtrx-1: If source is 'override' or 'manual' then an author SHALL be supplied, otherwise author is prohibited. ( extension.exists(url = 'source' and value = 'auto') != extension.exists(url = 'author') ) |
2. Extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
4. Extension.extension | |
Definition | An Extension |
Short | Extension |
Control | 1..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. Extension.extension:source | |
Slice Name | source |
Definition | The origination of information |
Short | The origination of information |
Control | 1..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
8. Extension.extension:source.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
10. Extension.extension:source.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
12. Extension.extension:source.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | source |
14. Extension.extension:source.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | auto | override | manual |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from Information Origins Value Set (extensible to http://hl7.org/fhir/us/davinci-dtr/ValueSet/informationOrigins ) |
Type | code |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
16. Extension.extension:author | |
Slice Name | author |
Definition | The author of the information adjustment |
Short | The author of the information adjustment |
Control | 0..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
18. Extension.extension:author.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
20. Extension.extension:author.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
22. Extension.extension:author.extension:role | |
Slice Name | role |
Definition | The role of the final human who authored the information adjustment |
Short | The role of the final human who authored the information adjustment |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
24. Extension.extension:author.extension:role.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
26. Extension.extension:author.extension:role.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
28. Extension.extension:author.extension:role.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | role |
30. Extension.extension:author.extension:role.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from US Core Provider Role (NUCC) (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-provider-role ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
32. Extension.extension:author.extension:practitioner | |
Slice Name | practitioner |
Definition | The final practitioner who authored the information adjustment |
Short | The final practitioner who authored the information adjustment |
Control | 0..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
34. Extension.extension:author.extension:practitioner.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
36. Extension.extension:author.extension:practitioner.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
38. Extension.extension:author.extension:practitioner.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | practitioner |
40. Extension.extension:author.extension:practitioner.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 1..1 |
Type | Reference(US Core Practitioner Profile) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
42. Extension.extension:author.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | author |
44. Extension.extension:author.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..0 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
46. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/us/davinci-dtr/StructureDefinition/information-origin |
48. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..0 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |