This page is part of the Da Vinci Coverage Requirements Discovery (CRD) FHIR IG (v2.1.0: STU 2.1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions
Page standards status: Informative | Maturity Level: 1 |
Definitions for the CRDMetricData logical model.
Guidance on how to interpret the contents of this table can be found here
0. CRDMetricData | |
Definition | A logical model describing the information that should be captured by CRD implementers about every CRD invocation to support measures evaluating CRD implementation |
Short | CRD Metric Data |
Logical Model | Instances of this logical model are not marked to be the target of a Reference |
2. CRDMetricData.source | |
Definition | A code to indicate which type of system collected the metric data. |
Short | provider-src | payer-src |
Comments | Each hook should have metric data capture by both the initiating provider and the responding payer. |
Control | 1..1 |
Binding | The codes SHALL be taken from CRD Metric Data Source Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/metricDataSource ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
4. CRDMetricData.hookInstance | |
Definition | The unique id for this specific hook invocation. |
Short | Unique hook invocation id |
Comments | Used to link the statistics for a given hook call between provider and payer systems. |
Control | 1..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
6. CRDMetricData.hookType | |
Definition | The type of hook specified in the |
Short | order-select | order-sign + |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from CDS Hook Types Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/cdsHookType ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
8. CRDMetricData.providerId | |
Definition | The NPI number of the user who initiated the hook request. |
Short | User invoking hook |
Control | 1..1 |
Type | Identifier |
10. CRDMetricData.providerId.system | |
Pattern Value | http://hl7.org/fhir/sid/us-npi |
12. CRDMetricData.providerId.value | |
Control | 1..? |
14. CRDMetricData.groupId | |
Definition | The NPI of the hospital/clinic/other organization that initiated the hook request. |
Short | Healthcare org of user |
Control | 1..1 |
Type | Identifier |
16. CRDMetricData.groupId.system | |
Pattern Value | http://hl7.org/fhir/sid/us-npi |
18. CRDMetricData.groupId.value | |
Control | 1..? |
20. CRDMetricData.payerId | |
Definition | The identifier of the payer organization to whom the CRD call was made. |
Short | Payer receiving hook |
Control | 1..1 |
Type | Identifier |
22. CRDMetricData.payerId.system | |
Control | 1..? |
24. CRDMetricData.payerId.value | |
Control | 1..? |
26. CRDMetricData.requestTime | |
Definition | For providers, the time the hook call was made. For payers, the time the hook call was received. |
Short | Time hook initiated |
Control | 1..1 |
Type | instant |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
28. CRDMetricData.responseTime | |
Definition | For providers, the time the hook response was received. For payers, the time the hook response was returned. |
Short | Time of hook response |
Control | 0..1 |
Type | instant |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
30. CRDMetricData.httpResponse | |
Definition | What HTTP response code was returned for the hook invocation. |
Short | e.g. 200 |
Control | 1..1 |
Type | positiveInt |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
32. CRDMetricData.issue | |
Definition | In the event of an HTTP error, if an OperationOutcome is returned, what were the issues? |
Short | OperationOutcome info |
Control | 0..* |
Type | BackboneElement |
34. CRDMetricData.issue.code | |
Definition | The issue.code value from the OperationOutcome for this issue. |
Short | Error code |
Control | 1..1 |
Binding | The codes SHALL be taken from IssueType (required to http://hl7.org/fhir/ValueSet/issue-type ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
36. CRDMetricData.issue.details | |
Definition | The issue.details value from the OperationOutcome for this issue. |
Short | More detailed error code |
Control | 0..1 |
Binding | For example codes, see OperationOutcomeCodes (example to http://hl7.org/fhir/ValueSet/operation-outcome ) |
Type | CodeableConcept |
Requirements | Because these codes are not standardized, they will primarily only be useful for evaluation between communication partners, not for comparison across implementations |
38. CRDMetricData.tokenUse | |
Definition | Indicates whether the provided access token was used to retrieve additional information. Rejected indicates that when used, the access failed. |
Short | used | not-used | rejected |
Control | 0..1 |
Binding | For example codes, see CRD Metric Token Use (example to http://hl7.org/fhir/us/davinci-crd/ValueSet/metricTokenUse ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
40. CRDMetricData.orderDetail | |
Definition | The code or codes defining the type of product or service from the focal Request or |
Short | Service or product code(s) |
Comments | Specifically, this corresponds to: Appointment.serviceType, CommunicationRequest.payload.valueCodeableConcept, DeviceRequest.codeCodeableConcept, DeviceRequest.codeReference.resolve().udiCarrier.deviceIdentifier (expressed as a CodeableConcept), Encounter.serviceType, MedicationRequest.medicationCodeableConcept, MedicationRequest.medicationReference.resolve().code, ServiceRequest.code, VisionPrescription.lensSpecification.productType |
Control | 0..* |
Binding | Unless not suitable, these codes SHALL be taken from CRD Order Detail Codes Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/orderDetail ) |
Type | CodeableConcept |
42. CRDMetricData.resources | |
Definition | Information other than the 'focal' resources (orders, encounter, appointment) for the hook that were accessed by the payer. |
Short | Resource types accessed |
Control | 0..* |
Type | BackboneElement |
44. CRDMetricData.resources.type | |
Definition | What kind of resource was accessed. |
Short | Kind of resource |
Control | 1..1 |
Binding | The codes SHALL be taken from ResourceType (required to http://hl7.org/fhir/ValueSet/resource-types ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
46. CRDMetricData.resources.profile | |
Definition | Indicates the sub-type of data accessed in situations where multiple US-core profiles could apply (e.g. Observation). Note: This does not mean that the data received was actually valid against the profile, merely that the search criteria used were intended to retrieve data of this type. |
Short | Solicited profile |
Control | 0..1 |
Type | canonical(StructureDefinition) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
48. CRDMetricData.resources.count | |
Definition | How many resources of that type were accessed. |
Short | Number retrieved |
Control | 1..1 |
Type | positiveInt |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
50. CRDMetricData.resources.prefetch | |
Definition | Was the data retrieved by prefetch or direct query. (If some resources of the same type were accessed both with and without prefetch, include two repetitions.) |
Short | Retrieved by prefetch? |
Control | 0..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
52. CRDMetricData.response | |
Definition | Summary information about each card or system action returned. |
Short | Returned card/system action |
Control | 0..* |
Type | BackboneElement |
54. CRDMetricData.response.type | |
Definition | The CRD code for the card. Mandatory if the card corresponds to a type defined by CRD, otherwise omit. |
Short | Type of CRD card |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Card Types Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/cardType ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
56. CRDMetricData.response.focus | |
Definition | Indicates the type of resource(s) tied to the card. |
Short | Resource tied to card |
Control | 0..* |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
58. CRDMetricData.response.engagement | |
Definition | Indicates if the user engaged with the card as per the CDS Hooks feedback mechanism. |
Short | ignore | accept | override |
Control | 0..1 |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
60. CRDMetricData.response.coverageInfo | |
Definition | If the card is a coverage-information card, indicates additional information about the information provided in the coverage-information extension. |
Short | Coverage information |
Control | 0..* |
Type | BackboneElement |
62. CRDMetricData.response.coverageInfo.covered | |
Definition | Indicates whether the service is covered. |
Short | covered | not-covered | conditional |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Covered Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageInfo ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
64. CRDMetricData.response.coverageInfo.paNeeded | |
Definition | Indicates whether prior authorization is necessary or not, as well as considerations about applying for prior authorization. |
Short | auth-needed | no-auth | satisfied + |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Prior Authorization Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coveragePaDetail ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
66. CRDMetricData.response.coverageInfo.docNeeded | |
Definition | Indicates whether additional information is necessary (for prior auth, claims submission, or some other purpose). |
Short | no-doc | clinical | admin | both + |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Additional Documentation Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/AdditionalDocumentation ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
68. CRDMetricData.response.coverageInfo.infoNeeded | |
Definition | Indicates what additional inforamtion is necessary in order to determine authorization/coverage - which might be available on a later hook invocation. |
Short | performer | location | timeframe |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Information Needed Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/informationNeeded ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
70. CRDMetricData.response.coverageInfo.questionnaire | |
Definition | Information about the Questionnaire(s) returned to gather additional information (e.g. through DTR). |
Short | Questionnaire(s) returned |
Control | 0..* |
Type | BackboneElement |
Requirements | Allows linking metadata about forms identified 'to be filled out' in CRD with what is actually completed in DTR, and eventually submitted in CDex, PAS or claims |
72. CRDMetricData.response.coverageInfo.questionnaire.reference | |
Definition | The official identifier of one of the Questionnaires provided to be filled out. |
Short | Questionnaire url & version |
Control | 1..1 |
Type | canonical(Questionnaire) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
74. CRDMetricData.response.coverageInfo.questionnaire.adaptive | |
Definition | If true, indicates that the questionnaire is adaptive (i.e. uses the $next-question operation to determine questions). |
Short | Is questionnaire adaptive? |
Control | 1..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
76. CRDMetricData.response.coverageInfo.questionnaire.response | |
Definition | If true, indicates that the card included a partially populated QuestionnaireResponse with answers filled by the payer from pre-known data. |
Short | Pre-pop response provided? |
Control | 1..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
78. CRDMetricData.response.coverageInfo.assertionId | |
Definition | Corresponds to the coverage-assertion-id from the coverage-information extension. |
Short | Id for coverage assertion |
Control | 1..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Requirements | Used to link the results of CRD to metric information captured for DTR and/or PAS. |
80. CRDMetricData.response.coverageInfo.satisfiedId | |
Definition | Corresponds to the satisfied-pa-id from the coverage-information extension. |
Short | Id if PA is satisfied |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
82. CRDMetricData.response.coverageInfo.businessLine | |
Definition | A code that indicates which type of insurance this assertion applies to. |
Short | E.g. MedicareAdvantage |
Control | 0..1 |
Type | CodeableConcept |
Guidance on how to interpret the contents of this table can be found here
0. CRDMetricData | |
Definition | A logical model describing the information that should be captured by CRD implementers about every CRD invocation to support measures evaluating CRD implementation |
Short | CRD Metric Data |
Control | 0..* |
Is Modifier | false |
Logical Model | Instances of this logical model are not marked to be the target of a Reference |
2. CRDMetricData.source | |
Definition | A code to indicate which type of system collected the metric data. |
Short | provider-src | payer-src |
Comments | Each hook should have metric data capture by both the initiating provider and the responding payer. |
Control | 1..1 |
Binding | The codes SHALL be taken from CRD Metric Data Source Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/metricDataSource ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
4. CRDMetricData.hookInstance | |
Definition | The unique id for this specific hook invocation. |
Short | Unique hook invocation id |
Comments | Used to link the statistics for a given hook call between provider and payer systems. |
Control | 1..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
6. CRDMetricData.hookType | |
Definition | The type of hook specified in the |
Short | order-select | order-sign + |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from CDS Hook Types Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/cdsHookType ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
8. CRDMetricData.providerId | |
Definition | The NPI number of the user who initiated the hook request. |
Short | User invoking hook |
Control | 1..1 |
Type | Identifier |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
10. CRDMetricData.providerId.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
12. CRDMetricData.providerId.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on CRDMetricData.providerId.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
14. CRDMetricData.providerId.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..1 |
Binding | The codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1 (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. CRDMetricData.providerId.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. CRDMetricData.providerId.system | |
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 0..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Pattern Value | http://hl7.org/fhir/sid/us-npi |
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. CRDMetricData.providerId.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 10..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. CRDMetricData.providerId.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. CRDMetricData.providerId.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. CRDMetricData.groupId | |
Definition | The NPI of the hospital/clinic/other organization that initiated the hook request. |
Short | Healthcare org of user |
Control | 1..1 |
Type | Identifier |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
28. CRDMetricData.groupId.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
30. CRDMetricData.groupId.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on CRDMetricData.groupId.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
32. CRDMetricData.groupId.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..1 |
Binding | The codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1 (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
34. CRDMetricData.groupId.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
36. CRDMetricData.groupId.system | |
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 0..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Pattern Value | http://hl7.org/fhir/sid/us-npi |
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
38. CRDMetricData.groupId.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 10..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
40. CRDMetricData.groupId.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
42. CRDMetricData.groupId.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
44. CRDMetricData.payerId | |
Definition | The identifier of the payer organization to whom the CRD call was made. |
Short | Payer receiving hook |
Control | 1..1 |
Type | Identifier |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
46. CRDMetricData.payerId.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
48. CRDMetricData.payerId.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on CRDMetricData.payerId.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
50. CRDMetricData.payerId.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..1 |
Binding | The codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1 (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
52. CRDMetricData.payerId.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
54. CRDMetricData.payerId.system | |
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 10..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
56. CRDMetricData.payerId.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 10..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
58. CRDMetricData.payerId.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
60. CRDMetricData.payerId.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
62. CRDMetricData.requestTime | |
Definition | For providers, the time the hook call was made. For payers, the time the hook call was received. |
Short | Time hook initiated |
Control | 1..1 |
Type | instant |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
64. CRDMetricData.responseTime | |
Definition | For providers, the time the hook response was received. For payers, the time the hook response was returned. |
Short | Time of hook response |
Control | 0..1 |
Type | instant |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
66. CRDMetricData.httpResponse | |
Definition | What HTTP response code was returned for the hook invocation. |
Short | e.g. 200 |
Control | 1..1 |
Type | positiveInt |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
68. CRDMetricData.issue | |
Definition | In the event of an HTTP error, if an OperationOutcome is returned, what were the issues? |
Short | OperationOutcome info |
Control | 0..* |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
70. CRDMetricData.issue.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
72. CRDMetricData.issue.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on CRDMetricData.issue.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
74. CRDMetricData.issue.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
76. CRDMetricData.issue.code | |
Definition | The issue.code value from the OperationOutcome for this issue. |
Short | Error code |
Control | 1..1 |
Binding | The codes SHALL be taken from IssueType (required to http://hl7.org/fhir/ValueSet/issue-type ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
78. CRDMetricData.issue.details | |
Definition | The issue.details value from the OperationOutcome for this issue. |
Short | More detailed error code |
Control | 0..1 |
Binding | For example codes, see OperationOutcomeCodes (example to http://hl7.org/fhir/ValueSet/operation-outcome ) |
Type | CodeableConcept |
Requirements | Because these codes are not standardized, they will primarily only be useful for evaluation between communication partners, not for comparison across implementations |
80. CRDMetricData.tokenUse | |
Definition | Indicates whether the provided access token was used to retrieve additional information. Rejected indicates that when used, the access failed. |
Short | used | not-used | rejected |
Control | 0..1 |
Binding | For example codes, see CRD Metric Token Use (example to http://hl7.org/fhir/us/davinci-crd/ValueSet/metricTokenUse ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
82. CRDMetricData.orderDetail | |
Definition | The code or codes defining the type of product or service from the focal Request or |
Short | Service or product code(s) |
Comments | Specifically, this corresponds to: Appointment.serviceType, CommunicationRequest.payload.valueCodeableConcept, DeviceRequest.codeCodeableConcept, DeviceRequest.codeReference.resolve().udiCarrier.deviceIdentifier (expressed as a CodeableConcept), Encounter.serviceType, MedicationRequest.medicationCodeableConcept, MedicationRequest.medicationReference.resolve().code, ServiceRequest.code, VisionPrescription.lensSpecification.productType |
Control | 0..* |
Binding | Unless not suitable, these codes SHALL be taken from CRD Order Detail Codes Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/orderDetail ) |
Type | CodeableConcept |
84. CRDMetricData.resources | |
Definition | Information other than the 'focal' resources (orders, encounter, appointment) for the hook that were accessed by the payer. |
Short | Resource types accessed |
Control | 0..* |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
86. CRDMetricData.resources.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
88. CRDMetricData.resources.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on CRDMetricData.resources.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
90. CRDMetricData.resources.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
92. CRDMetricData.resources.type | |
Definition | What kind of resource was accessed. |
Short | Kind of resource |
Control | 1..1 |
Binding | The codes SHALL be taken from ResourceType (required to http://hl7.org/fhir/ValueSet/resource-types ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
94. CRDMetricData.resources.profile | |
Definition | Indicates the sub-type of data accessed in situations where multiple US-core profiles could apply (e.g. Observation). Note: This does not mean that the data received was actually valid against the profile, merely that the search criteria used were intended to retrieve data of this type. |
Short | Solicited profile |
Control | 0..1 |
Type | canonical(StructureDefinition) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
96. CRDMetricData.resources.count | |
Definition | How many resources of that type were accessed. |
Short | Number retrieved |
Control | 1..1 |
Type | positiveInt |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
98. CRDMetricData.resources.prefetch | |
Definition | Was the data retrieved by prefetch or direct query. (If some resources of the same type were accessed both with and without prefetch, include two repetitions.) |
Short | Retrieved by prefetch? |
Control | 0..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
100. CRDMetricData.response | |
Definition | Summary information about each card or system action returned. |
Short | Returned card/system action |
Control | 0..* |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
102. CRDMetricData.response.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
104. CRDMetricData.response.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on CRDMetricData.response.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
106. CRDMetricData.response.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
108. CRDMetricData.response.type | |
Definition | The CRD code for the card. Mandatory if the card corresponds to a type defined by CRD, otherwise omit. |
Short | Type of CRD card |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Card Types Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/cardType ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
110. CRDMetricData.response.focus | |
Definition | Indicates the type of resource(s) tied to the card. |
Short | Resource tied to card |
Control | 0..* |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
112. CRDMetricData.response.engagement | |
Definition | Indicates if the user engaged with the card as per the CDS Hooks feedback mechanism. |
Short | ignore | accept | override |
Control | 0..1 |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
114. CRDMetricData.response.coverageInfo | |
Definition | If the card is a coverage-information card, indicates additional information about the information provided in the coverage-information extension. |
Short | Coverage information |
Control | 0..* |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
116. CRDMetricData.response.coverageInfo.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
118. CRDMetricData.response.coverageInfo.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on CRDMetricData.response.coverageInfo.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
120. CRDMetricData.response.coverageInfo.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
122. CRDMetricData.response.coverageInfo.covered | |
Definition | Indicates whether the service is covered. |
Short | covered | not-covered | conditional |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Covered Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageInfo ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
124. CRDMetricData.response.coverageInfo.paNeeded | |
Definition | Indicates whether prior authorization is necessary or not, as well as considerations about applying for prior authorization. |
Short | auth-needed | no-auth | satisfied + |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Prior Authorization Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coveragePaDetail ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
126. CRDMetricData.response.coverageInfo.docNeeded | |
Definition | Indicates whether additional information is necessary (for prior auth, claims submission, or some other purpose). |
Short | no-doc | clinical | admin | both + |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Additional Documentation Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/AdditionalDocumentation ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
128. CRDMetricData.response.coverageInfo.infoNeeded | |
Definition | Indicates what additional inforamtion is necessary in order to determine authorization/coverage - which might be available on a later hook invocation. |
Short | performer | location | timeframe |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Information Needed Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/informationNeeded ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
130. CRDMetricData.response.coverageInfo.questionnaire | |
Definition | Information about the Questionnaire(s) returned to gather additional information (e.g. through DTR). |
Short | Questionnaire(s) returned |
Control | 0..* |
Type | BackboneElement |
Requirements | Allows linking metadata about forms identified 'to be filled out' in CRD with what is actually completed in DTR, and eventually submitted in CDex, PAS or claims |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
132. CRDMetricData.response.coverageInfo.questionnaire.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
134. CRDMetricData.response.coverageInfo.questionnaire.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on CRDMetricData.response.coverageInfo.questionnaire.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
136. CRDMetricData.response.coverageInfo.questionnaire.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
138. CRDMetricData.response.coverageInfo.questionnaire.reference | |
Definition | The official identifier of one of the Questionnaires provided to be filled out. |
Short | Questionnaire url & version |
Control | 1..1 |
Type | canonical(Questionnaire) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
140. CRDMetricData.response.coverageInfo.questionnaire.adaptive | |
Definition | If true, indicates that the questionnaire is adaptive (i.e. uses the $next-question operation to determine questions). |
Short | Is questionnaire adaptive? |
Control | 1..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
142. CRDMetricData.response.coverageInfo.questionnaire.response | |
Definition | If true, indicates that the card included a partially populated QuestionnaireResponse with answers filled by the payer from pre-known data. |
Short | Pre-pop response provided? |
Control | 1..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
144. CRDMetricData.response.coverageInfo.assertionId | |
Definition | Corresponds to the coverage-assertion-id from the coverage-information extension. |
Short | Id for coverage assertion |
Control | 1..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Requirements | Used to link the results of CRD to metric information captured for DTR and/or PAS. |
146. CRDMetricData.response.coverageInfo.satisfiedId | |
Definition | Corresponds to the satisfied-pa-id from the coverage-information extension. |
Short | Id if PA is satisfied |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
148. CRDMetricData.response.coverageInfo.businessLine | |
Definition | A code that indicates which type of insurance this assertion applies to. |
Short | E.g. MedicareAdvantage |
Control | 0..1 |
Type | CodeableConcept |
Guidance on how to interpret the contents of this table can be found here
0. CRDMetricData | |
Definition | A logical model describing the information that should be captured by CRD implementers about every CRD invocation to support measures evaluating CRD implementation |
Short | CRD Metric Data |
Control | 0..* |
Is Modifier | false |
Logical Model | Instances of this logical model are not marked to be the target of a Reference |
2. CRDMetricData.source | |
Definition | A code to indicate which type of system collected the metric data. |
Short | provider-src | payer-src |
Comments | Each hook should have metric data capture by both the initiating provider and the responding payer. |
Control | 1..1 |
Binding | The codes SHALL be taken from CRD Metric Data Source Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/metricDataSource ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
4. CRDMetricData.hookInstance | |
Definition | The unique id for this specific hook invocation. |
Short | Unique hook invocation id |
Comments | Used to link the statistics for a given hook call between provider and payer systems. |
Control | 1..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
6. CRDMetricData.hookType | |
Definition | The type of hook specified in the |
Short | order-select | order-sign + |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from CDS Hook Types Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/cdsHookType ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
8. CRDMetricData.providerId | |
Definition | The NPI number of the user who initiated the hook request. |
Short | User invoking hook |
Control | 1..1 |
Type | Identifier |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
10. CRDMetricData.providerId.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
12. CRDMetricData.providerId.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on CRDMetricData.providerId.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
14. CRDMetricData.providerId.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..1 |
Binding | The codes SHALL be taken from IdentifierUse (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
16. CRDMetricData.providerId.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codes (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
18. CRDMetricData.providerId.system | |
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 0..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Pattern Value | http://hl7.org/fhir/sid/us-npi |
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
20. CRDMetricData.providerId.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
22. CRDMetricData.providerId.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
24. CRDMetricData.providerId.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
26. CRDMetricData.groupId | |
Definition | The NPI of the hospital/clinic/other organization that initiated the hook request. |
Short | Healthcare org of user |
Control | 1..1 |
Type | Identifier |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
28. CRDMetricData.groupId.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
30. CRDMetricData.groupId.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on CRDMetricData.groupId.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
32. CRDMetricData.groupId.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..1 |
Binding | The codes SHALL be taken from IdentifierUse (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
34. CRDMetricData.groupId.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codes (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
36. CRDMetricData.groupId.system | |
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 0..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Pattern Value | http://hl7.org/fhir/sid/us-npi |
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
38. CRDMetricData.groupId.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
40. CRDMetricData.groupId.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
42. CRDMetricData.groupId.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
44. CRDMetricData.payerId | |
Definition | The identifier of the payer organization to whom the CRD call was made. |
Short | Payer receiving hook |
Control | 1..1 |
Type | Identifier |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
46. CRDMetricData.payerId.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
48. CRDMetricData.payerId.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on CRDMetricData.payerId.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
50. CRDMetricData.payerId.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..1 |
Binding | The codes SHALL be taken from IdentifierUse (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
52. CRDMetricData.payerId.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codes (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
54. CRDMetricData.payerId.system | |
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
56. CRDMetricData.payerId.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Example | <br/><b>General</b>:123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
58. CRDMetricData.payerId.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
60. CRDMetricData.payerId.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
62. CRDMetricData.requestTime | |
Definition | For providers, the time the hook call was made. For payers, the time the hook call was received. |
Short | Time hook initiated |
Control | 1..1 |
Type | instant |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
64. CRDMetricData.responseTime | |
Definition | For providers, the time the hook response was received. For payers, the time the hook response was returned. |
Short | Time of hook response |
Control | 0..1 |
Type | instant |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
66. CRDMetricData.httpResponse | |
Definition | What HTTP response code was returned for the hook invocation. |
Short | e.g. 200 |
Control | 1..1 |
Type | positiveInt |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
68. CRDMetricData.issue | |
Definition | In the event of an HTTP error, if an OperationOutcome is returned, what were the issues? |
Short | OperationOutcome info |
Control | 0..* |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
70. CRDMetricData.issue.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
72. CRDMetricData.issue.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on CRDMetricData.issue.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
74. CRDMetricData.issue.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
76. CRDMetricData.issue.code | |
Definition | The issue.code value from the OperationOutcome for this issue. |
Short | Error code |
Control | 1..1 |
Binding | The codes SHALL be taken from IssueType (required to http://hl7.org/fhir/ValueSet/issue-type ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
78. CRDMetricData.issue.details | |
Definition | The issue.details value from the OperationOutcome for this issue. |
Short | More detailed error code |
Control | 0..1 |
Binding | For example codes, see OperationOutcomeCodes (example to http://hl7.org/fhir/ValueSet/operation-outcome ) |
Type | CodeableConcept |
Requirements | Because these codes are not standardized, they will primarily only be useful for evaluation between communication partners, not for comparison across implementations |
80. CRDMetricData.tokenUse | |
Definition | Indicates whether the provided access token was used to retrieve additional information. Rejected indicates that when used, the access failed. |
Short | used | not-used | rejected |
Control | 0..1 |
Binding | For example codes, see CRD Metric Token Use (example to http://hl7.org/fhir/us/davinci-crd/ValueSet/metricTokenUse ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
82. CRDMetricData.orderDetail | |
Definition | The code or codes defining the type of product or service from the focal Request or |
Short | Service or product code(s) |
Comments | Specifically, this corresponds to: Appointment.serviceType, CommunicationRequest.payload.valueCodeableConcept, DeviceRequest.codeCodeableConcept, DeviceRequest.codeReference.resolve().udiCarrier.deviceIdentifier (expressed as a CodeableConcept), Encounter.serviceType, MedicationRequest.medicationCodeableConcept, MedicationRequest.medicationReference.resolve().code, ServiceRequest.code, VisionPrescription.lensSpecification.productType |
Control | 0..* |
Binding | Unless not suitable, these codes SHALL be taken from CRD Order Detail Codes Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/orderDetail ) |
Type | CodeableConcept |
84. CRDMetricData.resources | |
Definition | Information other than the 'focal' resources (orders, encounter, appointment) for the hook that were accessed by the payer. |
Short | Resource types accessed |
Control | 0..* |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
86. CRDMetricData.resources.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
88. CRDMetricData.resources.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on CRDMetricData.resources.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
90. CRDMetricData.resources.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
92. CRDMetricData.resources.type | |
Definition | What kind of resource was accessed. |
Short | Kind of resource |
Control | 1..1 |
Binding | The codes SHALL be taken from ResourceType (required to http://hl7.org/fhir/ValueSet/resource-types ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
94. CRDMetricData.resources.profile | |
Definition | Indicates the sub-type of data accessed in situations where multiple US-core profiles could apply (e.g. Observation). Note: This does not mean that the data received was actually valid against the profile, merely that the search criteria used were intended to retrieve data of this type. |
Short | Solicited profile |
Control | 0..1 |
Type | canonical(StructureDefinition) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
96. CRDMetricData.resources.count | |
Definition | How many resources of that type were accessed. |
Short | Number retrieved |
Control | 1..1 |
Type | positiveInt |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
98. CRDMetricData.resources.prefetch | |
Definition | Was the data retrieved by prefetch or direct query. (If some resources of the same type were accessed both with and without prefetch, include two repetitions.) |
Short | Retrieved by prefetch? |
Control | 0..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
100. CRDMetricData.response | |
Definition | Summary information about each card or system action returned. |
Short | Returned card/system action |
Control | 0..* |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
102. CRDMetricData.response.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
104. CRDMetricData.response.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on CRDMetricData.response.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
106. CRDMetricData.response.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
108. CRDMetricData.response.type | |
Definition | The CRD code for the card. Mandatory if the card corresponds to a type defined by CRD, otherwise omit. |
Short | Type of CRD card |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Card Types Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/cardType ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
110. CRDMetricData.response.focus | |
Definition | Indicates the type of resource(s) tied to the card. |
Short | Resource tied to card |
Control | 0..* |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
112. CRDMetricData.response.engagement | |
Definition | Indicates if the user engaged with the card as per the CDS Hooks feedback mechanism. |
Short | ignore | accept | override |
Control | 0..1 |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
114. CRDMetricData.response.coverageInfo | |
Definition | If the card is a coverage-information card, indicates additional information about the information provided in the coverage-information extension. |
Short | Coverage information |
Control | 0..* |
Type | BackboneElement |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
116. CRDMetricData.response.coverageInfo.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
118. CRDMetricData.response.coverageInfo.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on CRDMetricData.response.coverageInfo.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
120. CRDMetricData.response.coverageInfo.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
122. CRDMetricData.response.coverageInfo.covered | |
Definition | Indicates whether the service is covered. |
Short | covered | not-covered | conditional |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Covered Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageInfo ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
124. CRDMetricData.response.coverageInfo.paNeeded | |
Definition | Indicates whether prior authorization is necessary or not, as well as considerations about applying for prior authorization. |
Short | auth-needed | no-auth | satisfied + |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Prior Authorization Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coveragePaDetail ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
126. CRDMetricData.response.coverageInfo.docNeeded | |
Definition | Indicates whether additional information is necessary (for prior auth, claims submission, or some other purpose). |
Short | no-doc | clinical | admin | both + |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Coverage Information Additional Documentation Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/AdditionalDocumentation ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
128. CRDMetricData.response.coverageInfo.infoNeeded | |
Definition | Indicates what additional inforamtion is necessary in order to determine authorization/coverage - which might be available on a later hook invocation. |
Short | performer | location | timeframe |
Control | 0..1 |
Binding | The codes SHALL be taken from CRD Information Needed Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/informationNeeded ) |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
130. CRDMetricData.response.coverageInfo.questionnaire | |
Definition | Information about the Questionnaire(s) returned to gather additional information (e.g. through DTR). |
Short | Questionnaire(s) returned |
Control | 0..* |
Type | BackboneElement |
Requirements | Allows linking metadata about forms identified 'to be filled out' in CRD with what is actually completed in DTR, and eventually submitted in CDex, PAS or claims |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
132. CRDMetricData.response.coverageInfo.questionnaire.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
134. CRDMetricData.response.coverageInfo.questionnaire.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on CRDMetricData.response.coverageInfo.questionnaire.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
136. CRDMetricData.response.coverageInfo.questionnaire.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
138. CRDMetricData.response.coverageInfo.questionnaire.reference | |
Definition | The official identifier of one of the Questionnaires provided to be filled out. |
Short | Questionnaire url & version |
Control | 1..1 |
Type | canonical(Questionnaire) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
140. CRDMetricData.response.coverageInfo.questionnaire.adaptive | |
Definition | If true, indicates that the questionnaire is adaptive (i.e. uses the $next-question operation to determine questions). |
Short | Is questionnaire adaptive? |
Control | 1..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
142. CRDMetricData.response.coverageInfo.questionnaire.response | |
Definition | If true, indicates that the card included a partially populated QuestionnaireResponse with answers filled by the payer from pre-known data. |
Short | Pre-pop response provided? |
Control | 1..1 |
Type | boolean |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
144. CRDMetricData.response.coverageInfo.assertionId | |
Definition | Corresponds to the coverage-assertion-id from the coverage-information extension. |
Short | Id for coverage assertion |
Control | 1..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Requirements | Used to link the results of CRD to metric information captured for DTR and/or PAS. |
146. CRDMetricData.response.coverageInfo.satisfiedId | |
Definition | Corresponds to the satisfied-pa-id from the coverage-information extension. |
Short | Id if PA is satisfied |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
148. CRDMetricData.response.coverageInfo.businessLine | |
Definition | A code that indicates which type of insurance this assertion applies to. |
Short | E.g. MedicareAdvantage |
Control | 0..1 |
Type | CodeableConcept |