Da Vinci - Coverage Requirements Discovery
2.2.0-ballot - STU 2.2 Ballot
Da Vinci - Coverage Requirements Discovery
2.2.0-ballot - STU 2.2 Ballot
This page is part of the Da Vinci Coverage Requirements Discovery (CRD) FHIR IG (v2.2.0-ballot: STU 2.2 Ballot) based on FHIR (HL7® FHIR® Standard) R4. This version is a pre-release. The current official version is 2.1.0. For a full list of available versions, see the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 1 |
Definitions for the ext-coverage-information extension.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Indicates coverage information. Optional Extension Element - found in all resources. |
| Short | CoverageInfoOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())crd-ci-q1: Questionnaire is only allowed when doc-needed exists ( extension.where(url='questionnaire').exists() implies extension.where(url = 'doc-needed').exists())crd-ci-q2: If covered is set to 'not-covered', then 'pa-needed' must not exist. ( extension.where(url = 'covered' and value = 'not-covered').exists() implies extension.where(url = 'pa-needed').exists().not())crd-ci-q3: 'info-needed' SHALL exist if and only if at least one of 'covered', 'pa-needed', or 'doc-needed' is set to 'conditional'. ( extension.where((url = 'covered' or url = 'pa-needed' or url = 'doc-needed') and value = 'conditional').count() >= 1 implies extension.where(url = 'info-needed').exists())crd-ci-q4: If 'pa-needed' is 'satisfied', 'noauth', or 'not-covered', then 'Doc-purpose' can't be 'withpa'. ( extension.where(url = 'pa-needed' and (value = 'satisfied' or value = 'noauth' or value = 'not-covered')) and extension.where(url = 'doc-purpose').exists() implies extension.where(url = 'doc-purpose').all(value != 'withpa'))crd-ci-q5: 'satisfied-pa-id' must exist if and only if 'pa-needed' is set to 'satisfied'. ( extension.where(url = 'pa-needed' and value = 'satisfied').exists() = extension.where(url = 'satisfied-pa-id').exists())crd-ci-q6: If 'info-needed' is OTH, then reason must be specified ( extension.where(url = 'info-needed' and value = 'OTH').exists() implies extension.where(url = 'reason').exists())crd-ci-q7: If reason.coding is present and is not from the extensible value set, then reason.text must be present ( extension.where(url = 'reason').empty() or extension.where(url = 'reason').value.text.exists() or extension.where(url = 'reason').value.memberOf('http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageAssertionReasons'))crd-ci-q8: If doc-purpose is present with a value other than 'conditional', then reason must be present ( extension.where(url = 'doc-purpose' and value != 'conditional').exists() implies extension.where(url = 'reason').exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 40..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:coverage | |
| Slice Name | coverage |
| Definition | Reference to Coverage that assertion applies to. |
| Short | Reference to CoverageAdditional content defined by implementations |
| Comments | This will always be a link to a Coverage resource on the CRD client's system - typically accessed via prefetch or direct query using the CDS-Hooks token. If no coverage instance is available, the coverage-information extension cannot be returned. |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:coverage.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 8. Extension.extension:coverage.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | coverage |
| 10. Extension.extension:coverage.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | Reference(CRD Coverage), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Extension.extension:covered | |
| Slice Name | covered |
| Definition | Indicates whether the ordered/requested service is covered under patient's plan. This includes checking whether the proposed service is a benefit under the patient's plan. It MAY also involve checking whether the patient has reached their limits under the current plan period but is not required to. |
| Short | covered | not-covered | conditionalAdditional content defined by implementations |
| Comments | Details on why coverage does not exist would be conveyed in the 'reason' element. |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 14. Extension.extension:covered.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 16. Extension.extension:covered.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | covered |
| 18. Extension.extension:covered.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see CRD Coverage Information Covered Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageInfo) |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.extension:pa-needed | |
| Slice Name | pa-needed |
| Definition | Indicates whether prior auth will be needed for coverage to be provided |
| Short | no-auth | auth-needed | satisfied | performpa | conditionalAdditional content defined by implementations |
| Control | 0..1* This element is affected by the following invariants: crd-ci-q2, crd-ci-q5 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 22. Extension.extension:pa-needed.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 24. Extension.extension:pa-needed.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | pa-needed |
| 26. Extension.extension:pa-needed.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see CRD Coverage Information Prior Authorization Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coveragePaDetail) |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:doc-needed | |
| Slice Name | doc-needed |
| Definition | Indicates whether additional documentation needs to be captured (purpose in next element) |
| Short | clinical | admin | patient | conditionalAdditional content defined by implementations |
| Comments | See additional guidance in the notes |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 30. Extension.extension:doc-needed.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:doc-needed.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | doc-needed |
| 34. Extension.extension:doc-needed.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see CRD Coverage Information Additional Documentation Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/AdditionalDocumentation) |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:doc-purpose | |
| Slice Name | doc-purpose |
| Definition | Indicates the reason(s) for the additional documentation that needs to be captured |
| Short | withpa | withclaim | withorder | retain-doc | OTHAdditional content defined by implementations |
| Control | 0..* This element is affected by the following invariants: crd-ci-q4 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Requirements | Knowing what the information will be used for may influence who will fill out the form(s) and how quickly the organization will get around to filling them out |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 38. Extension.extension:doc-purpose.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 40. Extension.extension:doc-purpose.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | doc-purpose |
| 42. Extension.extension:doc-purpose.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see CRD Coverage Information Documentation Reason Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/DocReason) |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 44. Extension.extension:info-needed | |
| Slice Name | info-needed |
| Definition | Indicates whether information about the performer, location, and/or performance date is needed to determine coverage information |
| Short | performer | location | timeframe | contract-window | detail-code | OTHAdditional content defined by implementations |
| Comments | See additional guidance in the notes If this element is set to OTH, then there must be at least one detail element the explains the nature of the additional information needed to determine coverage, prior authorization, and/or documentation requirements. There SHOULD also be a doc-needed element indicating that DTR can be used to gather additional information. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q3 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 46. Extension.extension:info-needed.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 48. Extension.extension:info-needed.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | info-needed |
| 50. Extension.extension:info-needed.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see CRD Information Needed Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/informationNeeded) |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.extension:billingCode | |
| Slice Name | billingCode |
| Definition | Billing code(s) that must be used in the eventual claim for the coverage assertion to hold |
| Short | Billing codeAdditional content defined by implementations |
| Comments | Codes may include modifier codes, leveraging CPT's post-coordination syntax |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 54. Extension.extension:billingCode.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 56. Extension.extension:billingCode.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | billingCode |
| 58. Extension.extension:billingCode.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | For example codes, see For codes, see USCLSCodes (example to http://hl7.org/fhir/ValueSet/service-uscls) |
| Type | Coding, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 60. Extension.extension:reason | |
| Slice Name | reason |
| Definition | Indicates the 'reason' for the coverage assertion |
| Short | Reason for assertionAdditional content defined by implementations |
| Comments | This can be used whenever the reason may not be obvious to the practitioner. E.g. prior authorization is waived because the provider is gold-carded; patient is no longer a minor and hasn't been registered as an adult dependent; patient has reached their limit for this type of service this year; etc. Additional standard reason codes may be introduced in the future. If no standard code applies, use text. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q7, crd-ci-q8, crd-ci-q6 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 62. Extension.extension:reason.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 64. Extension.extension:reason.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | reason |
| 66. Extension.extension:reason.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | Unless not suitable, these codes SHALL be taken from For codes, see CRD Coverage Assertion Reasons Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageAssertionReasons) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 68. Extension.extension:detail | |
| Slice Name | detail |
| Definition | Indicates the 'detail' for the coverage assertion |
| Short | detail for assertionAdditional content defined by implementations |
| Comments | Additional information that qualifies, describes, or provides additional guidance about coverage or documentation requirements. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 70. Extension.extension:detail.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 30..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 72. Extension.extension:detail.extension:category | |
| Slice Name | category |
| Definition | Indicates the nature of the detail, which in turn provides guidance for when it should be displayed. |
| Short | Type of detailAdditional content defined by implementations |
| Comments | CRD clients SHOULD make both limitation and decisional details available to clinical users. |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 74. Extension.extension:detail.extension:category.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 76. Extension.extension:detail.extension:category.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | category |
| 78. Extension.extension:detail.extension:category.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Binding | The codes SHALL be taken from For codes, see CRD Coverage Detail Categories Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageDetailCategories) |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 80. Extension.extension:detail.extension:code | |
| Slice Name | code |
| Definition | The type of detail or qualification expressed. |
| Short | Name of name-value pairAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 82. Extension.extension:detail.extension:code.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 84. Extension.extension:detail.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 86. Extension.extension:detail.extension:code.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from For codes, see CRD Coverage Detail Codes Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageDetail) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 88. Extension.extension:detail.extension:value | |
| Slice Name | value |
| Definition | The detail or qualification that applies to this coverage assertion. |
| Short | Value of name-value pairAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 90. Extension.extension:detail.extension:value.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 92. Extension.extension:detail.extension:value.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | value |
| 94. Extension.extension:detail.extension:value.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Choice of: boolean, string, url, Period, Quantity(SimpleQuantity), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, Annotation, ContactDetail, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 96. Extension.extension:detail.extension:qualification | |
| Slice Name | qualification |
| Definition | Additional text that qualifies/expands on the computable detail. E.g. 'Provided coverage is renewed' or 'Does not account for deductible' |
| Short | Additional info about detailAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 98. Extension.extension:detail.extension:qualification.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 100. Extension.extension:detail.extension:qualification.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | qualification |
| 102. Extension.extension:detail.extension:qualification.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 104. Extension.extension:detail.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | detail |
| 106. Extension.extension:detail.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 108. Extension.extension:dependency | |
| Slice Name | dependency |
| Definition | If present, indicates that the determination represented here is dependent on the content, determination, and possibly execution of the referenced order(s) |
| Short | Resources that impact this assertionAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Requirements | For example, the authorization decision on a request for post-surgical physiotherapy might be dependent on the order for the surgery itself. If coverage for the surgery is not approved or the order for the surgery is cancelled, that might impact the decision on covering the physiotherapy. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 110. Extension.extension:dependency.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 112. Extension.extension:dependency.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | dependency |
| 114. Extension.extension:dependency.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Reference(CRD Appointment with Order, CRD Appointment without Order, CRD Communication Request, CRD Device Request, CRD Medication Request, CRD Nutrition Order, CRD Service Request), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 116. Extension.extension:questionnaire | |
| Slice Name | questionnaire |
| Definition | A form to be filled out to gather more information. |
| Short | Questionnaire to completeAdditional content defined by implementations |
| Comments | If using DTR, this will be used by DTR to determine the Questionnaire packages to be returned. If empty, DTR will determine the questionnaire packages itself. If not using DTR, providing a Questionnaire url is the only way to indicate what form to complete. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 118. Extension.extension:questionnaire.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 120. Extension.extension:questionnaire.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | questionnaire |
| 122. Extension.extension:questionnaire.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | canonical(Questionnaire), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 124. Extension.extension:date | |
| Slice Name | date |
| Definition | Date on which assertion was made. |
| Short | Assertion dateAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 126. Extension.extension:date.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 128. Extension.extension:date.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | date |
| 130. Extension.extension:date.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 132. Extension.extension:coverage-assertion-id | |
| Slice Name | coverage-assertion-id |
| Definition | Trace identifier to allow tracking the guidance in source system. This identifier can also be used to re-establish cached context information when subsequently launching DTR. |
| Short | Coverage assertion trace numberAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 134. Extension.extension:coverage-assertion-id.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 136. Extension.extension:coverage-assertion-id.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | coverage-assertion-id |
| 138. Extension.extension:coverage-assertion-id.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 140. Extension.extension:satisfied-pa-id | |
| Slice Name | satisfied-pa-id |
| Definition | An identifier indicating that prior authorization requirements have been met |
| Short | Satisfied prior auth numberAdditional content defined by implementations |
| Comments | When operating under the CMS enforcement discretion, this element is a prior authorization number and can be submitted in the corresponding X12 element when submitting an eventual claim |
| Control | 0..1* This element is affected by the following invariants: crd-ci-q5 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 142. Extension.extension:satisfied-pa-id.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 144. Extension.extension:satisfied-pa-id.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | satisfied-pa-id |
| 146. Extension.extension:satisfied-pa-id.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 148. Extension.extension:contact | |
| Slice Name | contact |
| Definition | Phone number, fax number, email address, website, or other ContactPoint that can be used to ask questions/escalate issues related to a coverage assertion. |
| Short | Contact informationAdditional content defined by implementations |
| Comments | This SHOULD only be populated if the contact information is context-specific rather than a generic contact for the payer as a whole. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 150. Extension.extension:contact.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 152. Extension.extension:contact.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | contact |
| 154. Extension.extension:contact.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | ContactPoint, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 156. Extension.extension:expiry-date | |
| Slice Name | expiry-date |
| Definition | Date after which the coverage assertion would no longer be valid. |
| Short | Expiration dateAdditional content defined by implementations |
| Comments | In this case, mustSupport means that if the payer knows of an expiry date, they must share it. However, if the payer never has expiry dates for their assertions, it is fine to omit. |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 158. Extension.extension:expiry-date.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 160. Extension.extension:expiry-date.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | expiry-date |
| 162. Extension.extension:expiry-date.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 164. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/us/davinci-crd/StructureDefinition/ext-coverage-information |
| 166. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Indicates coverage information. |
| Short | CoverageInfo |
| Invariants | crd-ci-q1: Questionnaire is only allowed when doc-needed exists (extension.where(url='questionnaire').exists() implies extension.where(url = 'doc-needed').exists())crd-ci-q2: If covered is set to 'not-covered', then 'pa-needed' must not exist. ( extension.where(url = 'covered' and value = 'not-covered').exists() implies extension.where(url = 'pa-needed').exists().not())crd-ci-q3: 'info-needed' SHALL exist if and only if at least one of 'covered', 'pa-needed', or 'doc-needed' is set to 'conditional'. ( extension.where((url = 'covered' or url = 'pa-needed' or url = 'doc-needed') and value = 'conditional').count() >= 1 implies extension.where(url = 'info-needed').exists())crd-ci-q4: If 'pa-needed' is 'satisfied', 'noauth', or 'not-covered', then 'Doc-purpose' can't be 'withpa'. ( extension.where(url = 'pa-needed' and (value = 'satisfied' or value = 'noauth' or value = 'not-covered')) and extension.where(url = 'doc-purpose').exists() implies extension.where(url = 'doc-purpose').all(value != 'withpa'))crd-ci-q5: 'satisfied-pa-id' must exist if and only if 'pa-needed' is set to 'satisfied'. ( extension.where(url = 'pa-needed' and value = 'satisfied').exists() = extension.where(url = 'satisfied-pa-id').exists())crd-ci-q6: If 'info-needed' is OTH, then reason must be specified ( extension.where(url = 'info-needed' and value = 'OTH').exists() implies extension.where(url = 'reason').exists())crd-ci-q7: If reason.coding is present and is not from the extensible value set, then reason.text must be present ( extension.where(url = 'reason').empty() or extension.where(url = 'reason').value.text.exists() or extension.where(url = 'reason').value.memberOf('http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageAssertionReasons'))crd-ci-q8: If doc-purpose is present with a value other than 'conditional', then reason must be present ( extension.where(url = 'doc-purpose' and value != 'conditional').exists() implies extension.where(url = 'reason').exists()) |
| 2. Extension.extension | |
| Control | 4..? |
| 4. Extension.extension:coverage | |
| Slice Name | coverage |
| Definition | Reference to Coverage that assertion applies to. |
| Short | Reference to Coverage |
| Comments | This will always be a link to a Coverage resource on the CRD client's system - typically accessed via prefetch or direct query using the CDS-Hooks token. If no coverage instance is available, the coverage-information extension cannot be returned. |
| Control | 1..1 |
| Must Support | true |
| 6. Extension.extension:coverage.extension | |
| Control | 0..0 |
| 8. Extension.extension:coverage.url | |
| Fixed Value | coverage |
| 10. Extension.extension:coverage.value[x] | |
| Control | 1..? |
| Type | Reference(CRD Coverage) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 12. Extension.extension:covered | |
| Slice Name | covered |
| Definition | Indicates whether the ordered/requested service is covered under patient's plan. This includes checking whether the proposed service is a benefit under the patient's plan. It MAY also involve checking whether the patient has reached their limits under the current plan period but is not required to. |
| Short | covered | not-covered | conditional |
| Comments | Details on why coverage does not exist would be conveyed in the 'reason' element. |
| Control | 1..1 |
| Must Support | true |
| 14. Extension.extension:covered.extension | |
| Control | 0..0 |
| 16. Extension.extension:covered.url | |
| Fixed Value | covered |
| 18. Extension.extension:covered.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from CRD Coverage Information Covered Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageInfo) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 20. Extension.extension:pa-needed | |
| Slice Name | pa-needed |
| Definition | Indicates whether prior auth will be needed for coverage to be provided |
| Short | no-auth | auth-needed | satisfied | performpa | conditional |
| Control | 0..1 This element is affected by the following invariants: crd-ci-q2, crd-ci-q5 |
| Must Support | true |
| 22. Extension.extension:pa-needed.extension | |
| Control | 0..0 |
| 24. Extension.extension:pa-needed.url | |
| Fixed Value | pa-needed |
| 26. Extension.extension:pa-needed.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from CRD Coverage Information Prior Authorization Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coveragePaDetail) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 28. Extension.extension:doc-needed | |
| Slice Name | doc-needed |
| Definition | Indicates whether additional documentation needs to be captured (purpose in next element) |
| Short | clinical | admin | patient | conditional |
| Comments | See additional guidance in the notes |
| Control | 0..* |
| Must Support | true |
| 30. Extension.extension:doc-needed.extension | |
| Control | 0..0 |
| 32. Extension.extension:doc-needed.url | |
| Fixed Value | doc-needed |
| 34. Extension.extension:doc-needed.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from CRD Coverage Information Additional Documentation Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/AdditionalDocumentation) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 36. Extension.extension:doc-purpose | |
| Slice Name | doc-purpose |
| Definition | Indicates the reason(s) for the additional documentation that needs to be captured |
| Short | withpa | withclaim | withorder | retain-doc | OTH |
| Control | 0..* This element is affected by the following invariants: crd-ci-q4 |
| Must Support | true |
| Requirements | Knowing what the information will be used for may influence who will fill out the form(s) and how quickly the organization will get around to filling them out |
| 38. Extension.extension:doc-purpose.extension | |
| Control | 0..0 |
| 40. Extension.extension:doc-purpose.url | |
| Fixed Value | doc-purpose |
| 42. Extension.extension:doc-purpose.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from CRD Coverage Information Documentation Reason Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/DocReason) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 44. Extension.extension:info-needed | |
| Slice Name | info-needed |
| Definition | Indicates whether information about the performer, location, and/or performance date is needed to determine coverage information |
| Short | performer | location | timeframe | contract-window | detail-code | OTH |
| Comments | See additional guidance in the notes If this element is set to OTH, then there must be at least one detail element the explains the nature of the additional information needed to determine coverage, prior authorization, and/or documentation requirements. There SHOULD also be a doc-needed element indicating that DTR can be used to gather additional information. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q3 |
| Must Support | true |
| 46. Extension.extension:info-needed.extension | |
| Control | 0..0 |
| 48. Extension.extension:info-needed.url | |
| Fixed Value | info-needed |
| 50. Extension.extension:info-needed.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from CRD Information Needed Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/informationNeeded) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 52. Extension.extension:billingCode | |
| Slice Name | billingCode |
| Definition | Billing code(s) that must be used in the eventual claim for the coverage assertion to hold |
| Short | Billing code |
| Comments | Codes may include modifier codes, leveraging CPT's post-coordination syntax |
| Control | 0..* |
| Must Support | true |
| 54. Extension.extension:billingCode.extension | |
| Control | 0..0 |
| 56. Extension.extension:billingCode.url | |
| Fixed Value | billingCode |
| 58. Extension.extension:billingCode.value[x] | |
| Control | 1..? |
| Binding | For example codes, see USCLSCodes (example to http://hl7.org/fhir/ValueSet/service-uscls) |
| Type | Coding |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 60. Extension.extension:reason | |
| Slice Name | reason |
| Definition | Indicates the 'reason' for the coverage assertion |
| Short | Reason for assertion |
| Comments | This can be used whenever the reason may not be obvious to the practitioner. E.g. prior authorization is waived because the provider is gold-carded; patient is no longer a minor and hasn't been registered as an adult dependent; patient has reached their limit for this type of service this year; etc. Additional standard reason codes may be introduced in the future. If no standard code applies, use text. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q7, crd-ci-q8, crd-ci-q6 |
| Must Support | true |
| 62. Extension.extension:reason.extension | |
| Control | 0..0 |
| 64. Extension.extension:reason.url | |
| Fixed Value | reason |
| 66. Extension.extension:reason.value[x] | |
| Control | 1..? |
| Binding | Unless not suitable, these codes SHALL be taken from CRD Coverage Assertion Reasons Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageAssertionReasons) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 68. Extension.extension:detail | |
| Slice Name | detail |
| Definition | Indicates the 'detail' for the coverage assertion |
| Short | detail for assertion |
| Comments | Additional information that qualifies, describes, or provides additional guidance about coverage or documentation requirements. |
| Control | 0..* |
| Must Support | true |
| 70. Extension.extension:detail.extension | |
| Control | 3..? |
| 72. Extension.extension:detail.extension:category | |
| Slice Name | category |
| Definition | Indicates the nature of the detail, which in turn provides guidance for when it should be displayed. |
| Short | Type of detail |
| Comments | CRD clients SHOULD make both limitation and decisional details available to clinical users. |
| Control | 1..1 |
| 74. Extension.extension:detail.extension:category.extension | |
| Control | 0..0 |
| 76. Extension.extension:detail.extension:category.url | |
| Fixed Value | category |
| 78. Extension.extension:detail.extension:category.value[x] | |
| Binding | The codes SHALL be taken from CRD Coverage Detail Categories Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageDetailCategories) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 80. Extension.extension:detail.extension:code | |
| Slice Name | code |
| Definition | The type of detail or qualification expressed. |
| Short | Name of name-value pair |
| Control | 1..1 |
| 82. Extension.extension:detail.extension:code.extension | |
| Control | 0..0 |
| 84. Extension.extension:detail.extension:code.url | |
| Fixed Value | code |
| 86. Extension.extension:detail.extension:code.value[x] | |
| Binding | Unless not suitable, these codes SHALL be taken from CRD Coverage Detail Codes Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageDetail) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 88. Extension.extension:detail.extension:value | |
| Slice Name | value |
| Definition | The detail or qualification that applies to this coverage assertion. |
| Short | Value of name-value pair |
| Control | 1..1 |
| 90. Extension.extension:detail.extension:value.extension | |
| Control | 0..0 |
| 92. Extension.extension:detail.extension:value.url | |
| Fixed Value | value |
| 94. Extension.extension:detail.extension:value.value[x] | |
| Type | Choice of: boolean, string, url, Period, Quantity(SimpleQuantity) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 96. Extension.extension:detail.extension:qualification | |
| Slice Name | qualification |
| Definition | Additional text that qualifies/expands on the computable detail. E.g. 'Provided coverage is renewed' or 'Does not account for deductible' |
| Short | Additional info about detail |
| Control | 0..1 |
| 98. Extension.extension:detail.extension:qualification.extension | |
| Control | 0..0 |
| 100. Extension.extension:detail.extension:qualification.url | |
| Fixed Value | qualification |
| 102. Extension.extension:detail.extension:qualification.value[x] | |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 104. Extension.extension:detail.url | |
| Fixed Value | detail |
| 106. Extension.extension:detail.value[x] | |
| Control | 0..0 |
| 108. Extension.extension:dependency | |
| Slice Name | dependency |
| Definition | If present, indicates that the determination represented here is dependent on the content, determination, and possibly execution of the referenced order(s) |
| Short | Resources that impact this assertion |
| Control | 0..* |
| Must Support | true |
| Requirements | For example, the authorization decision on a request for post-surgical physiotherapy might be dependent on the order for the surgery itself. If coverage for the surgery is not approved or the order for the surgery is cancelled, that might impact the decision on covering the physiotherapy. |
| 110. Extension.extension:dependency.extension | |
| Control | 0..0 |
| 112. Extension.extension:dependency.url | |
| Fixed Value | dependency |
| 114. Extension.extension:dependency.value[x] | |
| Type | Reference(CRD Appointment with Order, CRD Appointment without Order, CRD Communication Request, CRD Device Request, CRD Medication Request, CRD Nutrition Order, CRD Service Request) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 116. Extension.extension:questionnaire | |
| Slice Name | questionnaire |
| Definition | A form to be filled out to gather more information. |
| Short | Questionnaire to complete |
| Comments | If using DTR, this will be used by DTR to determine the Questionnaire packages to be returned. If empty, DTR will determine the questionnaire packages itself. If not using DTR, providing a Questionnaire url is the only way to indicate what form to complete. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q1 |
| Must Support | true |
| 118. Extension.extension:questionnaire.extension | |
| Control | 0..0 |
| 120. Extension.extension:questionnaire.url | |
| Fixed Value | questionnaire |
| 122. Extension.extension:questionnaire.value[x] | |
| Type | canonical(Questionnaire) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 124. Extension.extension:date | |
| Slice Name | date |
| Definition | Date on which assertion was made. |
| Short | Assertion date |
| Control | 1..1 |
| Must Support | true |
| 126. Extension.extension:date.extension | |
| Control | 0..0 |
| 128. Extension.extension:date.url | |
| Fixed Value | date |
| 130. Extension.extension:date.value[x] | |
| Control | 1..? |
| Type | date |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 132. Extension.extension:coverage-assertion-id | |
| Slice Name | coverage-assertion-id |
| Definition | Trace identifier to allow tracking the guidance in source system. This identifier can also be used to re-establish cached context information when subsequently launching DTR. |
| Short | Coverage assertion trace number |
| Control | 1..1 |
| Must Support | true |
| 134. Extension.extension:coverage-assertion-id.extension | |
| Control | 0..0 |
| 136. Extension.extension:coverage-assertion-id.url | |
| Fixed Value | coverage-assertion-id |
| 138. Extension.extension:coverage-assertion-id.value[x] | |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 140. Extension.extension:satisfied-pa-id | |
| Slice Name | satisfied-pa-id |
| Definition | An identifier indicating that prior authorization requirements have been met |
| Short | Satisfied prior auth number |
| Comments | When operating under the CMS enforcement discretion, this element is a prior authorization number and can be submitted in the corresponding X12 element when submitting an eventual claim |
| Control | 0..1 This element is affected by the following invariants: crd-ci-q5 |
| Must Support | true |
| 142. Extension.extension:satisfied-pa-id.extension | |
| Control | 0..0 |
| 144. Extension.extension:satisfied-pa-id.url | |
| Fixed Value | satisfied-pa-id |
| 146. Extension.extension:satisfied-pa-id.value[x] | |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 148. Extension.extension:contact | |
| Slice Name | contact |
| Definition | Phone number, fax number, email address, website, or other ContactPoint that can be used to ask questions/escalate issues related to a coverage assertion. |
| Short | Contact information |
| Comments | This SHOULD only be populated if the contact information is context-specific rather than a generic contact for the payer as a whole. |
| Control | 0..* |
| Must Support | true |
| 150. Extension.extension:contact.extension | |
| Control | 0..0 |
| 152. Extension.extension:contact.url | |
| Fixed Value | contact |
| 154. Extension.extension:contact.value[x] | |
| Type | ContactPoint |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 156. Extension.extension:expiry-date | |
| Slice Name | expiry-date |
| Definition | Date after which the coverage assertion would no longer be valid. |
| Short | Expiration date |
| Comments | In this case, mustSupport means that if the payer knows of an expiry date, they must share it. However, if the payer never has expiry dates for their assertions, it is fine to omit. |
| Control | 0..1 |
| Must Support | true |
| 158. Extension.extension:expiry-date.extension | |
| Control | 0..0 |
| 160. Extension.extension:expiry-date.url | |
| Fixed Value | expiry-date |
| 162. Extension.extension:expiry-date.value[x] | |
| Type | date |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 164. Extension.url | |
| Fixed Value | http://hl7.org/fhir/us/davinci-crd/StructureDefinition/ext-coverage-information |
| 166. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Indicates coverage information. |
| Short | CoverageInfo |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())crd-ci-q1: Questionnaire is only allowed when doc-needed exists ( extension.where(url='questionnaire').exists() implies extension.where(url = 'doc-needed').exists())crd-ci-q2: If covered is set to 'not-covered', then 'pa-needed' must not exist. ( extension.where(url = 'covered' and value = 'not-covered').exists() implies extension.where(url = 'pa-needed').exists().not())crd-ci-q3: 'info-needed' SHALL exist if and only if at least one of 'covered', 'pa-needed', or 'doc-needed' is set to 'conditional'. ( extension.where((url = 'covered' or url = 'pa-needed' or url = 'doc-needed') and value = 'conditional').count() >= 1 implies extension.where(url = 'info-needed').exists())crd-ci-q4: If 'pa-needed' is 'satisfied', 'noauth', or 'not-covered', then 'Doc-purpose' can't be 'withpa'. ( extension.where(url = 'pa-needed' and (value = 'satisfied' or value = 'noauth' or value = 'not-covered')) and extension.where(url = 'doc-purpose').exists() implies extension.where(url = 'doc-purpose').all(value != 'withpa'))crd-ci-q5: 'satisfied-pa-id' must exist if and only if 'pa-needed' is set to 'satisfied'. ( extension.where(url = 'pa-needed' and value = 'satisfied').exists() = extension.where(url = 'satisfied-pa-id').exists())crd-ci-q6: If 'info-needed' is OTH, then reason must be specified ( extension.where(url = 'info-needed' and value = 'OTH').exists() implies extension.where(url = 'reason').exists())crd-ci-q7: If reason.coding is present and is not from the extensible value set, then reason.text must be present ( extension.where(url = 'reason').empty() or extension.where(url = 'reason').value.text.exists() or extension.where(url = 'reason').value.memberOf('http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageAssertionReasons'))crd-ci-q8: If doc-purpose is present with a value other than 'conditional', then reason must be present ( extension.where(url = 'doc-purpose' and value != 'conditional').exists() implies extension.where(url = 'reason').exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 4..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:coverage | |
| Slice Name | coverage |
| Definition | Reference to Coverage that assertion applies to. |
| Short | Reference to Coverage |
| Comments | This will always be a link to a Coverage resource on the CRD client's system - typically accessed via prefetch or direct query using the CDS-Hooks token. If no coverage instance is available, the coverage-information extension cannot be returned. |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:coverage.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:coverage.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:coverage.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | coverage |
| 14. Extension.extension:coverage.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | Reference(CRD Coverage) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:covered | |
| Slice Name | covered |
| Definition | Indicates whether the ordered/requested service is covered under patient's plan. This includes checking whether the proposed service is a benefit under the patient's plan. It MAY also involve checking whether the patient has reached their limits under the current plan period but is not required to. |
| Short | covered | not-covered | conditional |
| Comments | Details on why coverage does not exist would be conveyed in the 'reason' element. |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:covered.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:covered.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:covered.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | covered |
| 24. Extension.extension:covered.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from CRD Coverage Information Covered Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageInfo) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:pa-needed | |
| Slice Name | pa-needed |
| Definition | Indicates whether prior auth will be needed for coverage to be provided |
| Short | no-auth | auth-needed | satisfied | performpa | conditional |
| Control | 0..1 This element is affected by the following invariants: crd-ci-q2, crd-ci-q5 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 28. Extension.extension:pa-needed.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:pa-needed.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:pa-needed.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | pa-needed |
| 34. Extension.extension:pa-needed.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from CRD Coverage Information Prior Authorization Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coveragePaDetail) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:doc-needed | |
| Slice Name | doc-needed |
| Definition | Indicates whether additional documentation needs to be captured (purpose in next element) |
| Short | clinical | admin | patient | conditional |
| Comments | See additional guidance in the notes |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 38. Extension.extension:doc-needed.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 40. Extension.extension:doc-needed.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:doc-needed.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | doc-needed |
| 44. Extension.extension:doc-needed.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from CRD Coverage Information Additional Documentation Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/AdditionalDocumentation) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:doc-purpose | |
| Slice Name | doc-purpose |
| Definition | Indicates the reason(s) for the additional documentation that needs to be captured |
| Short | withpa | withclaim | withorder | retain-doc | OTH |
| Control | 0..* This element is affected by the following invariants: crd-ci-q4 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Requirements | Knowing what the information will be used for may influence who will fill out the form(s) and how quickly the organization will get around to filling them out |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 48. Extension.extension:doc-purpose.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 50. Extension.extension:doc-purpose.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Extension.extension:doc-purpose.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | doc-purpose |
| 54. Extension.extension:doc-purpose.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from CRD Coverage Information Documentation Reason Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/DocReason) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Extension.extension:info-needed | |
| Slice Name | info-needed |
| Definition | Indicates whether information about the performer, location, and/or performance date is needed to determine coverage information |
| Short | performer | location | timeframe | contract-window | detail-code | OTH |
| Comments | See additional guidance in the notes If this element is set to OTH, then there must be at least one detail element the explains the nature of the additional information needed to determine coverage, prior authorization, and/or documentation requirements. There SHOULD also be a doc-needed element indicating that DTR can be used to gather additional information. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q3 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 58. Extension.extension:info-needed.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 60. Extension.extension:info-needed.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 62. Extension.extension:info-needed.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | info-needed |
| 64. Extension.extension:info-needed.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from CRD Information Needed Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/informationNeeded) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.extension:billingCode | |
| Slice Name | billingCode |
| Definition | Billing code(s) that must be used in the eventual claim for the coverage assertion to hold |
| Short | Billing code |
| Comments | Codes may include modifier codes, leveraging CPT's post-coordination syntax |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 68. Extension.extension:billingCode.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 70. Extension.extension:billingCode.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 72. Extension.extension:billingCode.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | billingCode |
| 74. Extension.extension:billingCode.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | For example codes, see USCLSCodes (example to http://hl7.org/fhir/ValueSet/service-uscls) |
| Type | Coding |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 76. Extension.extension:reason | |
| Slice Name | reason |
| Definition | Indicates the 'reason' for the coverage assertion |
| Short | Reason for assertion |
| Comments | This can be used whenever the reason may not be obvious to the practitioner. E.g. prior authorization is waived because the provider is gold-carded; patient is no longer a minor and hasn't been registered as an adult dependent; patient has reached their limit for this type of service this year; etc. Additional standard reason codes may be introduced in the future. If no standard code applies, use text. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q7, crd-ci-q8, crd-ci-q6 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 78. Extension.extension:reason.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 80. Extension.extension:reason.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 82. Extension.extension:reason.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | reason |
| 84. Extension.extension:reason.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | Unless not suitable, these codes SHALL be taken from CRD Coverage Assertion Reasons Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageAssertionReasons) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 86. Extension.extension:detail | |
| Slice Name | detail |
| Definition | Indicates the 'detail' for the coverage assertion |
| Short | detail for assertion |
| Comments | Additional information that qualifies, describes, or provides additional guidance about coverage or documentation requirements. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 88. Extension.extension:detail.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 90. Extension.extension:detail.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 3..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 92. Extension.extension:detail.extension:category | |
| Slice Name | category |
| Definition | Indicates the nature of the detail, which in turn provides guidance for when it should be displayed. |
| Short | Type of detail |
| Comments | CRD clients SHOULD make both limitation and decisional details available to clinical users. |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 94. Extension.extension:detail.extension:category.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 96. Extension.extension:detail.extension:category.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 98. Extension.extension:detail.extension:category.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | category |
| 100. Extension.extension:detail.extension:category.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CRD Coverage Detail Categories Value Set (required to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageDetailCategories) |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 102. Extension.extension:detail.extension:code | |
| Slice Name | code |
| Definition | The type of detail or qualification expressed. |
| Short | Name of name-value pair |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 104. Extension.extension:detail.extension:code.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 106. Extension.extension:detail.extension:code.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 108. Extension.extension:detail.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 110. Extension.extension:detail.extension:code.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from CRD Coverage Detail Codes Value Set (extensible to http://hl7.org/fhir/us/davinci-crd/ValueSet/coverageDetail) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 112. Extension.extension:detail.extension:value | |
| Slice Name | value |
| Definition | The detail or qualification that applies to this coverage assertion. |
| Short | Value of name-value pair |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 114. Extension.extension:detail.extension:value.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 116. Extension.extension:detail.extension:value.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 118. Extension.extension:detail.extension:value.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | value |
| 120. Extension.extension:detail.extension:value.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Choice of: boolean, string, url, Period, Quantity(SimpleQuantity) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 122. Extension.extension:detail.extension:qualification | |
| Slice Name | qualification |
| Definition | Additional text that qualifies/expands on the computable detail. E.g. 'Provided coverage is renewed' or 'Does not account for deductible' |
| Short | Additional info about detail |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 124. Extension.extension:detail.extension:qualification.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 126. Extension.extension:detail.extension:qualification.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 128. Extension.extension:detail.extension:qualification.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | qualification |
| 130. Extension.extension:detail.extension:qualification.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 132. Extension.extension:detail.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | detail |
| 134. Extension.extension:detail.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 136. Extension.extension:dependency | |
| Slice Name | dependency |
| Definition | If present, indicates that the determination represented here is dependent on the content, determination, and possibly execution of the referenced order(s) |
| Short | Resources that impact this assertion |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Requirements | For example, the authorization decision on a request for post-surgical physiotherapy might be dependent on the order for the surgery itself. If coverage for the surgery is not approved or the order for the surgery is cancelled, that might impact the decision on covering the physiotherapy. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 138. Extension.extension:dependency.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 140. Extension.extension:dependency.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 142. Extension.extension:dependency.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | dependency |
| 144. Extension.extension:dependency.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Reference(CRD Appointment with Order, CRD Appointment without Order, CRD Communication Request, CRD Device Request, CRD Medication Request, CRD Nutrition Order, CRD Service Request) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 146. Extension.extension:questionnaire | |
| Slice Name | questionnaire |
| Definition | A form to be filled out to gather more information. |
| Short | Questionnaire to complete |
| Comments | If using DTR, this will be used by DTR to determine the Questionnaire packages to be returned. If empty, DTR will determine the questionnaire packages itself. If not using DTR, providing a Questionnaire url is the only way to indicate what form to complete. |
| Control | 0..* This element is affected by the following invariants: crd-ci-q1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 148. Extension.extension:questionnaire.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 150. Extension.extension:questionnaire.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 152. Extension.extension:questionnaire.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | questionnaire |
| 154. Extension.extension:questionnaire.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | canonical(Questionnaire) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 156. Extension.extension:date | |
| Slice Name | date |
| Definition | Date on which assertion was made. |
| Short | Assertion date |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 158. Extension.extension:date.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 160. Extension.extension:date.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 162. Extension.extension:date.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | date |
| 164. Extension.extension:date.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | date |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 166. Extension.extension:coverage-assertion-id | |
| Slice Name | coverage-assertion-id |
| Definition | Trace identifier to allow tracking the guidance in source system. This identifier can also be used to re-establish cached context information when subsequently launching DTR. |
| Short | Coverage assertion trace number |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 168. Extension.extension:coverage-assertion-id.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 170. Extension.extension:coverage-assertion-id.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 172. Extension.extension:coverage-assertion-id.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | coverage-assertion-id |
| 174. Extension.extension:coverage-assertion-id.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 176. Extension.extension:satisfied-pa-id | |
| Slice Name | satisfied-pa-id |
| Definition | An identifier indicating that prior authorization requirements have been met |
| Short | Satisfied prior auth number |
| Comments | When operating under the CMS enforcement discretion, this element is a prior authorization number and can be submitted in the corresponding X12 element when submitting an eventual claim |
| Control | 0..1 This element is affected by the following invariants: crd-ci-q5 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 178. Extension.extension:satisfied-pa-id.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 180. Extension.extension:satisfied-pa-id.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 182. Extension.extension:satisfied-pa-id.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | satisfied-pa-id |
| 184. Extension.extension:satisfied-pa-id.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 186. Extension.extension:contact | |
| Slice Name | contact |
| Definition | Phone number, fax number, email address, website, or other ContactPoint that can be used to ask questions/escalate issues related to a coverage assertion. |
| Short | Contact information |
| Comments | This SHOULD only be populated if the contact information is context-specific rather than a generic contact for the payer as a whole. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 188. Extension.extension:contact.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 190. Extension.extension:contact.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 192. Extension.extension:contact.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | contact |
| 194. Extension.extension:contact.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | ContactPoint |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 196. Extension.extension:expiry-date | |
| Slice Name | expiry-date |
| Definition | Date after which the coverage assertion would no longer be valid. |
| Short | Expiration date |
| Comments | In this case, mustSupport means that if the payer knows of an expiry date, they must share it. However, if the payer never has expiry dates for their assertions, it is fine to omit. |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 198. Extension.extension:expiry-date.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 200. Extension.extension:expiry-date.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 202. Extension.extension:expiry-date.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | expiry-date |
| 204. Extension.extension:expiry-date.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | date |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 206. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/us/davinci-crd/StructureDefinition/ext-coverage-information |
| 208. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2019+ HL7 International / Financial Management. Package hl7.fhir.us.davinci-crd#2.2.0-ballot based on FHIR 4.0.1. Generated 2025-08-06
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change