This page is part of the Data Access Framework (v1.6.0: STU 2 Ballot 1) based on FHIR v1.6.0. . For a full list of available versions, see the Directory of published versions
<StructureDefinition xmlns="http://hl7.org/fhir">
<id value="daf-medicationorder"/>
<url
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-medicationorder"/>
<name value="Profile daf-medicationorder"/>
<status value="draft"/>
<publisher
value="Health Level Seven International (Infrastructure and Messaging - Data Access Framework)"/>
<contact>
<telecom>
<system value="other"/>
<value value="http://www.healthit.gov"/>
</telecom>
</contact>
<date value="2015-03-20"/>
<mapping>
<identity value="script10.6"/>
<uri value="http://ncpdp.org/SCRIPT10_6"/>
<name value="Mapping to NCPDP SCRIPT 10.6"/>
</mapping>
<mapping>
<identity value="rim"/>
<uri value="http://hl7.org/v3"/>
<name value="RIM Mapping"/>
</mapping>
<mapping>
<identity value="w5"/>
<uri value="http://hl7.org/fhir/w5"/>
<name value="W5 Mapping"/>
</mapping>
<mapping>
<identity value="v2"/>
<uri value="http://hl7.org/v2"/>
<name value="HL7 v2 Mapping"/>
</mapping>
<kind value="resource"/>
<abstract value="false"/>
<type value="MedicationOrder"/>
<baseDefinition
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-core-medicationorder"/>
<derivation value="constraint"/>
<snapshot>
<element id="MedicationOrder:dafmedicationorder">
<path value="MedicationOrder"/>
<name value="DAFMedicationOrder"/>
<short value="Prescription of medication to for patient"/>
<definition
value="An order for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationOrder" rather than "MedicationPrescription" to generalize the use across inpatient and outpatient settings as well as for care plans, etc."/>
<comments
value="The WG will be updating the MedicationOrder resource to adjust each affected resource to align with the workflow pattern (see workflow.html). MedicationOrder will be renamed to MedicationRequest as part of these changes."/>
<alias value="Prescription"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="MedicationOrder"/>
<min value="0"/>
<max value="*"/>
</base>
<constraint>
<key value="dom-2"/>
<severity value="error"/>
<human
value="If the resource is contained in another resource, it SHALL NOT contain nested Resources"/>
<expression value="contained.contained.empty()"/>
<xpath value="not(parent::f:contained and f:contained)"/>
</constraint>
<constraint>
<key value="dom-1"/>
<severity value="error"/>
<human
value="If the resource is contained in another resource, it SHALL NOT contain any narrative"/>
<expression value="contained.text.empty()"/>
<xpath value="not(parent::f:contained and f:text)"/>
</constraint>
<constraint>
<key value="dom-4"/>
<severity value="error"/>
<human
value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated"/>
<expression
value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()"/>
<xpath
value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))"/>
</constraint>
<constraint>
<key value="dom-3"/>
<severity value="error"/>
<human
value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource"/>
<expression
value="contained.where(('#'+id in %resource.descendants().reference).not()).empty()"/>
<xpath
value="not(exists(for $id in f:contained/*/@id return $id[not(ancestor::f:contained/parent::*/descendant::f:reference/@value=concat('#', $id))]))"/>
</constraint>
<mustSupport value="false"/>
<isSummary value="false"/>
<mapping>
<identity value="rim"/>
<map value="Entity. Role, or Act"/>
</mapping>
<mapping>
<identity value="script10.6"/>
<map value="Message/Body/NewRx"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="CombinedMedicationRequest"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="clinical.medication"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.id">
<path value="MedicationOrder.id"/>
<short value="Logical id of this artifact"/>
<definition
value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes."/>
<comments
value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="Resource.id"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="id"/>
</type>
<isSummary value="true"/>
</element>
<element id="MedicationOrder:dafmedicationorder.meta">
<path value="MedicationOrder.meta"/>
<short value="Metadata about the resource"/>
<definition
value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="Resource.meta"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Meta"/>
</type>
<isSummary value="true"/>
</element>
<element id="MedicationOrder:dafmedicationorder.implicitRules">
<path value="MedicationOrder.implicitRules"/>
<short value="A set of rules under which this content was created"/>
<definition
value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content."/>
<comments
value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element as much as possible."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="Resource.implicitRules"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="uri"/>
</type>
<isModifier value="true"/>
<isSummary value="true"/>
</element>
<element id="MedicationOrder:dafmedicationorder.language">
<path value="MedicationOrder.language"/>
<short value="Language of the resource content"/>
<definition value="The base language in which the resource is written."/>
<comments
value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="Resource.language"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="code"/>
</type>
<binding>
<extension
url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet">
<valueReference>
<reference value="http://hl7.org/fhir/ValueSet/all-languages"/>
</valueReference>
</extension>
<strength value="extensible"/>
<description value="A human language."/>
<valueSetReference>
<reference value="http://hl7.org/fhir/ValueSet/languages"/>
</valueSetReference>
</binding>
</element>
<element id="MedicationOrder:dafmedicationorder.text">
<path value="MedicationOrder.text"/>
<short value="Text summary of the resource, for human interpretation"/>
<definition
value="A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety."/>
<comments
value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later."/>
<alias value="narrative"/>
<alias value="html"/>
<alias value="xhtml"/>
<alias value="display"/>
<min value="0"/>
<max value="1"/>
<base>
<path value="DomainResource.text"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Narrative"/>
</type>
<condition value="dom-1"/>
<mapping>
<identity value="rim"/>
<map value="Act.text?"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.contained">
<path value="MedicationOrder.contained"/>
<short value="Contained, inline Resources"/>
<definition
value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope."/>
<comments
value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again."/>
<alias value="inline resources"/>
<alias value="anonymous resources"/>
<alias value="contained resources"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="DomainResource.contained"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Resource"/>
</type>
<mapping>
<identity value="rim"/>
<map value="N/A"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.extension">
<path value="MedicationOrder.extension"/>
<short value="Additional Content defined by implementations"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="DomainResource.extension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<mapping>
<identity value="rim"/>
<map value="N/A"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.modifierExtension">
<path value="MedicationOrder.modifierExtension"/>
<short value="Extensions that cannot be ignored"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="DomainResource.modifierExtension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<isModifier value="true"/>
<mapping>
<identity value="rim"/>
<map value="N/A"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.identifier">
<path value="MedicationOrder.identifier"/>
<short value="External identifier"/>
<definition
value="External identifier - one that would be used by another non-FHIR system - for example a re-imbursement system might issue its own id for each prescription that is created. This is particularly important where FHIR only provides part of an entire workflow process where records have to be tracked through an entire system."/>
<min value="0"/>
<max value="*"/>
<base>
<path value="MedicationOrder.identifier"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Identifier"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="Message/Header/PrescriberOrderNumber"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="ORC-2-Placer Order Number / ORC-3-Filler Order Number"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="id"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="id"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.status">
<path value="MedicationOrder.status"/>
<short
value="active | on-hold | completed | entered-in-error | stopped | draft"/>
<definition
value="A code specifying the state of the order. Generally this will be active or completed state."/>
<min value="1"/>
<max value="1"/>
<base>
<path value="MedicationOrder.status"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="code"/>
</type>
<mustSupport value="true"/>
<isModifier value="true"/>
<isSummary value="false"/>
<binding>
<strength value="required"/>
<description
value="A code specifying the state of the prescribing event. Describes the lifecycle of the prescription."/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/ValueSet/medication-order-status"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map value="no mapping"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="statusCode"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="status"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.medication[x]">
<path value="MedicationOrder.medication[x]"/>
<short value="Medication to be taken"/>
<definition
value="Identifies the medication being administered. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications."/>
<comments
value="If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. Note: do not use Medication.name to describe the prescribed medication. When the only available information is a text description of the medication, Medication.code.text should be used."/>
<min value="1"/>
<max value="1"/>
<base>
<path value="MedicationOrder.medication[x]"/>
<min value="1"/>
<max value="1"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<type>
<code value="Reference"/>
<profile
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-medication"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<binding>
<strength value="extensible"/>
<description value="Prescribable medications"/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/us/daf/ValueSet/daf-medication-codes"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map
value="Message/Body/NewRx/MedicationPrescribed Medication.code.coding.code = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCode Medication.code.coding.system = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCodeQualifier Medication.code.coding.display = Message/Body/NewRx/MedicationPrescribed/DrugDescription"/>
</mapping>
<mapping>
<identity value="v2"/>
<map
value="RXE-2-Give Code / RXO-1-Requested Give Code / RXC-2-Component Code"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="consumable.administrableMedication"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="what"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.patient">
<path value="MedicationOrder.patient"/>
<short value="Who prescription is for"/>
<definition
value="A link to a resource representing the person to whom the medication will be given."/>
<comments value="SubstanceAdministration->subject->Patient."/>
<min value="1"/>
<max value="1"/>
<base>
<path value="MedicationOrder.patient"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Reference"/>
<profile
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-patient"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map
value="Message/Body/NewRx/Patient (need detail to link to specific patient … Patient.Identification in SCRIPT)"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="PID-3-Patient ID List"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="subject.role"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="who.focus"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.encounter">
<path value="MedicationOrder.encounter"/>
<short
value="An interaction during which services are provided to the patient"/>
<definition
value="An interaction between a patient and healthcare provider(s) for the purpose of providing healthcare service(s) or assessing the health status of a patient."/>
<alias value="Visit"/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.encounter"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Reference"/>
<profile
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-encounter"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="rim"/>
<map value="Entity. Role, or Act"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="Encounter[@moodCode='EVN']"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="workflow.encounter"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dateWritten">
<path value="MedicationOrder.dateWritten"/>
<short value="When prescription was initially authorized"/>
<definition
value="The date (and perhaps time) when the prescription was initially written."/>
<min value="1"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dateWritten"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="dateTime"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="Message/Body/NewRx/MedicationPrescribed/WrittenDate"/>
</mapping>
<mapping>
<identity value="v2"/>
<map
value="RXE-32-Original Order Date/Time / ORC-9-Date/Time of Transaction"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="author.time"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="when.recorded"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.prescriber">
<path value="MedicationOrder.prescriber"/>
<short value="Who ordered the initial medication(s)"/>
<definition
value="The healthcare professional responsible for authorizing the initial prescription."/>
<min value="1"/>
<max value="1"/>
<base>
<path value="MedicationOrder.prescriber"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Reference"/>
<profile
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-core-pract"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map
value="Message/Body/NewRx/Prescriber (need detail to link to specific prescriber … Prescriber.Identification in SCRIPT)"/>
</mapping>
<mapping>
<identity value="v2"/>
<map
value="RXE-13-Ordering Provider's DEA Number / RXO-14-Ordering Provider's DEA Number / RXE-14-Pharmacist/Treatment Supplier's Verifier ID / RXO-15-Pharmacist/Treatment Supplier's Verifier ID / ORC-12-Ordering Provider / PRT-5-Participation Person: PRT-4-Participation='OP' (all but last deprecated)"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="author.role"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="who.actor"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.reasonCode">
<path value="MedicationOrder.reasonCode"/>
<short value="Reason or indication for writing the prescription"/>
<definition
value="Can be the reason or the indication for writing the prescription."/>
<comments
value="This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference."/>
<min value="0"/>
<max value="*"/>
<base>
<path value="MedicationOrder.reasonCode"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<binding>
<strength value="example"/>
<description
value="A coded concept indicating why the medication was ordered."/>
<valueSetReference>
<reference value="http://hl7.org/fhir/ValueSet/condition-code"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map
value="Message/Body/NewRx/MedicationPrescribed/Diagnosis/Primary/Value"/>
</mapping>
<mapping>
<identity value="v2"/>
<map
value="ORC-16-Order Control Code Reason /RXE-27-Give Indication/RXO-20-Indication / RXD-21-Indication / RXG-22-Indication / RXA-19-Indication"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="reason.observation.reasonCode"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="why"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.reasonReference">
<path value="MedicationOrder.reasonReference"/>
<short
value="Condition that supports why the prescription is being written"/>
<definition
value="Condition that supports why the prescription is being written."/>
<comments
value="This is a reference to a condition that is the reason for the medication order. If only a code exists, use reasonCode."/>
<min value="0"/>
<max value="*"/>
<base>
<path value="MedicationOrder.reasonReference"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Reference"/>
<profile value="http://hl7.org/fhir/StructureDefinition/Condition"/>
</type>
<mapping>
<identity value="script10.6"/>
<map value="no mapping"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="reason.observation[code=ASSERTION].value"/>
</mapping>
<mapping>
<identity value="w5"/>
<map value="why"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.note">
<path value="MedicationOrder.note"/>
<short value="Information about the prescription"/>
<definition
value="Extra information about the prescription that could not be conveyed by the other attributes."/>
<min value="0"/>
<max value="*"/>
<base>
<path value="MedicationOrder.note"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Annotation"/>
</type>
<mapping>
<identity value="script10.6"/>
<map value="Message/Body/NewRx/MedicationPrescribed/Note"/>
</mapping>
<mapping>
<identity value="rim"/>
<map
value=".inboundRelationship[typeCode=SUBJ]/source[classCode=OBS,moodCode=EVN,code="annotation"].value"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.category">
<path value="MedicationOrder.category"/>
<short value="Type of medication usage"/>
<definition
value="Indicates where type of medication order and where the medication is expected to be consumed or administered."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.category"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="code"/>
</type>
<binding>
<strength value="example"/>
<description
value="A coded concept identifying where the medication ordered is expected to be consumed or administered"/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/ValueSet/medication-order-category"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map
value="Message/Body/NewRx/MedicationPrescribed/Directions or Message/Body/NewRx/MedicationPrescribed/StructuredSIG"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="not mapped"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction">
<path value="MedicationOrder.dosageInstruction"/>
<short value="How medication should be taken"/>
<definition
value="Indicates how the medication is to be used by the patient."/>
<comments
value="When the dose or rate is intended to change over the entire administration period, e.g. Tapering dose prescriptions, multiple instances of dosage instructions will need to be supplied to convey the different doses/rates. Another common example in institutional settings is 'titration' of an IV medication dose to maintain a specific stated hemodynamic value or range e.g. drug x to be administered to maintain AM (arterial mean) greater than 65."/>
<min value="0"/>
<max value="*"/>
<base>
<path value="MedicationOrder.dosageInstruction"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="BackboneElement"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map
value="Message/Body/NewRx/MedicationPrescribed/Directions or //element(*,SIGType)/FreeText"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="component.substanceAdministrationRequest"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.id">
<path value="MedicationOrder.dosageInstruction.id"/>
<representation value="xmlAttr"/>
<short value="xml:id (or equivalent in JSON)"/>
<definition
value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="Element.id"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="string"/>
</type>
<mapping>
<identity value="rim"/>
<map value="n/a"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.extension">
<path value="MedicationOrder.dosageInstruction.extension"/>
<short value="Additional Content defined by implementations"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="Element.extension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<mapping>
<identity value="rim"/>
<map value="n/a"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.modifierExtension">
<path value="MedicationOrder.dosageInstruction.modifierExtension"/>
<short value="Extensions that cannot be ignored"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<alias value="modifiers"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="BackboneElement.modifierExtension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<isModifier value="true"/>
<isSummary value="true"/>
<mapping>
<identity value="rim"/>
<map value="N/A"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.text">
<path value="MedicationOrder.dosageInstruction.text"/>
<short value="Free text dosage instructions e.g. SIG"/>
<definition
value="Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.text"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="string"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="v2"/>
<map
value="RXE-7.2-Provider's Administration Instructions.text / RXO-7.2-Provider's Administration Instructions.text / TQ1-10-Condition Text / TQ1-11-Text Instruction"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="text"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.additionalInstructions">
<path value="MedicationOrder.dosageInstruction.additionalInstructions"/>
<short value="Supplemental instructions - e.g. "with meals""/>
<definition
value="Additional instructions such as "Swallow with plenty of water" which may or may not be coded."/>
<min value="0"/>
<max value="*"/>
<base>
<path value="MedicationOrder.dosageInstruction.additionalInstructions"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<binding>
<strength value="example"/>
<description
value="A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery"."/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/ValueSet/additional-instructions-codes"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map value="//element(*,SIGType)/Timing"/>
</mapping>
<mapping>
<identity value="v2"/>
<map
value="RXE-7.2-Provider's Administration Instructions.text / RXO-7.2-Provider's Administration Instructions.text / TQ1-10-Condition Text / TQ1-11-Text Instruction"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="component.substanceAdministrationRequest.text"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.timing">
<path value="MedicationOrder.dosageInstruction.timing"/>
<short value="When medication should be administered"/>
<definition
value="The timing schedule for giving the medication to the patient. The Schedule data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period."/>
<comments
value="This attribute may not always be populated while the DosageInstruction.text is expected to be populated. If both are populated, then the DosageInstruction.text should reflect the content of the Dosage.timing."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.timing"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Timing"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="//element(*,SIGType)/SiteofAdministration"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="TQ1-X / ORC Quantity/timing"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="effectiveTime"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.asNeeded[x]">
<path value="MedicationOrder.dosageInstruction.asNeeded[x]"/>
<short value="Take "as needed" (for x)"/>
<definition
value="Indicates whether the Medication is only taken when needed within a specific dosing schedule (Boolean option), or it indicates the precondition for taking the Medication (CodeableConcept)."/>
<comments
value="Specifically if 'boolean' datatype is selected, then the following logic applies: If set to True, this indicates that the medication is only taken when needed, within the specified schedule."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.asNeeded[x]"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="boolean"/>
</type>
<type>
<code value="CodeableConcept"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<binding>
<strength value="example"/>
<description
value="A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc."/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/ValueSet/medication-as-needed-reason"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map
value="Message/Body/NewRx/MedicationPrescribed/StructuredSIG/SiteofAdministration"/>
</mapping>
<mapping>
<identity value="rim"/>
<map
value="boolean: precondition.negationInd (inversed - so negationInd = true means asNeeded=false CodeableConcept: precondition.observationEventCriterion[code="Assertion"].value"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.siteCodeableConcept">
<path value="MedicationOrder.dosageInstruction.siteCodeableConcept"/>
<short value="Body site to administer to"/>
<definition
value="A coded specification of the anatomic site where the medication first enters the body."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.site[x]"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<binding>
<strength value="preferred"/>
<description
value="This identifies the body site at which the substance was administered"/>
<valueSetReference>
<reference value="http://hl7.org/fhir/us/daf/ValueSet/daf-bodysite"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map value="//element(*,SIGType)/RouteofAdministration"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="RXR-2-Administration Site"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="approachSiteCode"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.route">
<path value="MedicationOrder.dosageInstruction.route"/>
<short value="How drug should enter body"/>
<definition
value="A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.route"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<binding>
<strength value="preferred"/>
<description
value="This identifies the route of substance administration."/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/us/daf/ValueSet/daf-medication-route"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map value="//element(*,SIGType)/Dose/DoseDeliveryMethodCode"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="RXR-1-Route"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="routeCode"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.method">
<path value="MedicationOrder.dosageInstruction.method"/>
<short value="Technique for administering medication"/>
<definition
value="A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections. For examples, Slow Push; Deep IV."/>
<comments
value="Terminologies used often pre-coordinate this term with the route and or form of administration."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.method"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<binding>
<strength value="example"/>
<description
value="A coded concept describing the technique by which the medicine is administered."/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/ValueSet/administration-method-codes"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map value="//element(*,SIGType)/Dose"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="RXR-4-Administration Method"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="methodCode"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.dose[x]">
<path value="MedicationOrder.dosageInstruction.dose[x]"/>
<short value="Amount of medication per dose"/>
<definition
value="The amount of therapeutic or other substance given at one administration event."/>
<comments
value="Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.dose[x]"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Range"/>
</type>
<type>
<code value="Quantity"/>
<profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="//element(*,SIGType)/MaximumDoseRestriction"/>
</mapping>
<mapping>
<identity value="v2"/>
<map
value="RXE-23-Give Rate Amount / RXE-24.1-Give Rate Units.code / RXE-24.3-Give Rate Units.name of coding system"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="doseQuantity"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.maxDosePerPeriod">
<path value="MedicationOrder.dosageInstruction.maxDosePerPeriod"/>
<short value="Upper limit on medication per unit of time"/>
<definition
value="The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours."/>
<comments
value="This is intended for use as an adjunct to the dosage when there is an upper cap. For example "2 tablets every 4 hours to a maximum of 8/day"."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.maxDosePerPeriod"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Ratio"/>
</type>
<mapping>
<identity value="script10.6"/>
<map value="//element(*,SIGType)/MaximumDoseRestriction"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="RXE-4-Give Amount - Maximum / RXE-5-Give Units"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="maxDoseQuantity"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.maxDosePerAdministration">
<path value="MedicationOrder.dosageInstruction.maxDosePerAdministration"/>
<short value="Upper limit on medication per administration"/>
<definition
value="The maximum total quantity of a therapeutic substance that may be administered to a subject per administration."/>
<comments
value="This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.maxDosePerAdministration"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Quantity"/>
<profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/>
</type>
<mapping>
<identity value="script10.6"/>
<map value="//element(*,SIGType)/MaximumDoseRestriction"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="no mapping"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.maxDosePerLifetime">
<path value="MedicationOrder.dosageInstruction.maxDosePerLifetime"/>
<short value="Upper limit on medication per lifetime of the patient"/>
<definition
value="The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.maxDosePerLifetime"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Quantity"/>
<profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/>
</type>
<mapping>
<identity value="rim"/>
<map value="no mapping"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.rate[x]">
<path value="MedicationOrder.dosageInstruction.rate[x]"/>
<short value="Amount of medication per unit of time"/>
<definition
value="Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period."/>
<comments
value="It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationOrder with an updated rate, or captured with a new MedicationOrder with the new rate."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dosageInstruction.rate[x]"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Ratio"/>
</type>
<type>
<code value="Range"/>
</type>
<type>
<code value="Quantity"/>
<profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="no mapping"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="RXE-22-Give Per (Time Unit)"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="rateQuantity"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dispenseRequest">
<path value="MedicationOrder.dispenseRequest"/>
<short value="Medication supply authorization"/>
<definition
value="Indicates the specific details for the dispense or medication supply part of a medication order (also known as a Medication Prescription). Note that this information is NOT always sent with the order. There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dispenseRequest"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="BackboneElement"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="Message/Body/NewRx/MedicationPrescribed/ExpirationDate"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="component.supplyEvent"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dispenseRequest.id">
<path value="MedicationOrder.dispenseRequest.id"/>
<representation value="xmlAttr"/>
<short value="xml:id (or equivalent in JSON)"/>
<definition
value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="Element.id"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="string"/>
</type>
<mapping>
<identity value="rim"/>
<map value="n/a"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dispenseRequest.extension">
<path value="MedicationOrder.dispenseRequest.extension"/>
<short value="Additional Content defined by implementations"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="Element.extension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<mapping>
<identity value="rim"/>
<map value="n/a"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dispenseRequest.modifierExtension">
<path value="MedicationOrder.dispenseRequest.modifierExtension"/>
<short value="Extensions that cannot be ignored"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<alias value="modifiers"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="BackboneElement.modifierExtension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<isModifier value="true"/>
<isSummary value="true"/>
<mapping>
<identity value="rim"/>
<map value="N/A"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dispenseRequest.validityPeriod">
<path value="MedicationOrder.dispenseRequest.validityPeriod"/>
<short value="Time period supply is authorized for"/>
<definition
value="This indicates the validity period of a prescription (stale dating the Prescription)."/>
<comments
value="It reflects the prescriber perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations."/>
<requirements
value="Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dispenseRequest.validityPeriod"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Period"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="Message/Body/NewRx/MedicationPrescribed/Refills"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="effectiveTime"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dispenseRequest.numberOfRepeatsAllowed">
<path value="MedicationOrder.dispenseRequest.numberOfRepeatsAllowed"/>
<short value="Number of refills authorized"/>
<definition
value="An integer indicating the number of times, in addition to the original dispense, (aka refills or repeats) that the patient can receive the prescribed medication. Usage Notes: This integer does NOT include the original order dispense. This means that if an order indicates dispense 30 tablets plus "3 repeats", then the order can be dispensed a total of 4 times and the patient can receive a total of 120 tablets."/>
<comments
value="If displaying "number of authorized fills", add 1 to this number."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dispenseRequest.numberOfRepeatsAllowed"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="positiveInt"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="Message/Body/NewRx/MedicationPrescribed/Quantity"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="RXE-12-Number of Refills"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="repeatNumber"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.dispenseRequest.quantity">
<path value="MedicationOrder.dispenseRequest.quantity"/>
<short value="Amount of medication to supply per dispense"/>
<definition value="The amount that is to be dispensed for one fill."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dispenseRequest.quantity"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Quantity"/>
<profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="Message/Body/NewRx/MedicationPrescribed/DaysSupply"/>
</mapping>
<mapping>
<identity value="v2"/>
<map
value="RXD-4-Actual Dispense Amount / RXD-5.1-Actual Dispense Units.code / RXD-5.3-Actual Dispense Units.name of coding system"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="quantity"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.dispenseRequest.expectedSupplyDuration">
<path value="MedicationOrder.dispenseRequest.expectedSupplyDuration"/>
<short value="Number of days supply per dispense"/>
<definition
value="Identifies the period time over which the supplied product is expected to be used, or the length of time the dispense is expected to last."/>
<comments
value="In some situations, this attribute may be used instead of quantity to identify the amount supplied by how long it is expected to last, rather than the physical quantity issued, e.g. 90 days supply of medication (based on an ordered dosage) When possible, it is always better to specify quantity, as this tends to be more precise. expectedSupplyDuration will always be an estimate that can be influenced by external factors."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.dispenseRequest.expectedSupplyDuration"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Duration"/>
</type>
<mustSupport value="true"/>
<isSummary value="false"/>
<mapping>
<identity value="script10.6"/>
<map value="Message/Body/NewRx/MedicationPrescribed/Substitutions"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="expectedUseTime"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.substitution">
<path value="MedicationOrder.substitution"/>
<short value="Any restrictions on medication substitution"/>
<definition
value="Indicates whether or not substitution can or should be part of the dispense. In some cases substitution must happen, in other cases substitution must not happen, and in others it does not matter. This block explains the prescriber's intent. If nothing is specified substitution may be done."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.substitution"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="BackboneElement"/>
</type>
<mapping>
<identity value="script10.6"/>
<map
value="specific values within Message/Body/NewRx/MedicationPrescribed/Substitutions"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="subjectOf.substitutionPersmission"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.substitution.id">
<path value="MedicationOrder.substitution.id"/>
<representation value="xmlAttr"/>
<short value="xml:id (or equivalent in JSON)"/>
<definition
value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="Element.id"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="string"/>
</type>
<mapping>
<identity value="rim"/>
<map value="n/a"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.substitution.extension">
<path value="MedicationOrder.substitution.extension"/>
<short value="Additional Content defined by implementations"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="Element.extension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<mapping>
<identity value="rim"/>
<map value="n/a"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.substitution.modifierExtension">
<path value="MedicationOrder.substitution.modifierExtension"/>
<short value="Extensions that cannot be ignored"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<alias value="modifiers"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="BackboneElement.modifierExtension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<isModifier value="true"/>
<isSummary value="true"/>
<mapping>
<identity value="rim"/>
<map value="N/A"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.substitution.allowed">
<path value="MedicationOrder.substitution.allowed"/>
<short value="Whether substitution is allowed or not"/>
<definition
value="True if the prescriber allows a different drug to be dispensed from what was prescribed."/>
<min value="1"/>
<max value="1"/>
<base>
<path value="MedicationOrder.substitution.allowed"/>
<min value="1"/>
<max value="1"/>
</base>
<type>
<code value="boolean"/>
</type>
<mapping>
<identity value="script10.6"/>
<map
value="specific values within Message/Body/NewRx/MedicationPrescribed/Substitutions"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="RXO-9-Allow Substitutions / RXE-9-Substitution Status"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="code"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.substitution.reason">
<path value="MedicationOrder.substitution.reason"/>
<short value="Why should (not) substitution be made"/>
<definition
value="Indicates the reason for the substitution, or why substitution must or must not be performed."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.substitution.reason"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<binding>
<strength value="example"/>
<description
value="A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed."/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/ValueSet/v3-SubstanceAdminSubstitutionReason"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map value="not mapped"/>
</mapping>
<mapping>
<identity value="v2"/>
<map value="RXE-9 Substition status"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="reasonCode"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.priorPrescription">
<path value="MedicationOrder.priorPrescription"/>
<short value="An order/prescription that this supersedes"/>
<definition
value="A link to a resource representing an earlier order related order or prescription."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.priorPrescription"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Reference"/>
<profile value="http://hl7.org/fhir/StructureDefinition/MedicationOrder"/>
</type>
<mapping>
<identity value="script10.6"/>
<map value="not mapped"/>
</mapping>
<mapping>
<identity value="rim"/>
<map
value=".outboundRelationship[typeCode=?RPLC or ?SUCC]/target[classCode=SBADM,moodCode=RQO]"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.eventHistory">
<path value="MedicationOrder.eventHistory"/>
<short value="A list of events of interest in the lifecycle"/>
<definition
value="A summary of the events of interest that have occurred as the request is processed; e.g. when the order was verified or when it was completed."/>
<comments
value="This is not the same as an audit trail. It is a view of the important things that happened in the past. Typically, there would only be one entry for any given status, and systems may not record all the status events."/>
<min value="0"/>
<max value="*"/>
<base>
<path value="MedicationOrder.eventHistory"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="BackboneElement"/>
</type>
<mapping>
<identity value="script10.6"/>
<map value="not mapped"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="not mapped"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.eventHistory.id">
<path value="MedicationOrder.eventHistory.id"/>
<representation value="xmlAttr"/>
<short value="xml:id (or equivalent in JSON)"/>
<definition
value="unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="Element.id"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="string"/>
</type>
<mapping>
<identity value="rim"/>
<map value="n/a"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.eventHistory.extension">
<path value="MedicationOrder.eventHistory.extension"/>
<short value="Additional Content defined by implementations"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="Element.extension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<mapping>
<identity value="rim"/>
<map value="n/a"/>
</mapping>
</element>
<element
id="MedicationOrder:dafmedicationorder.eventHistory.modifierExtension">
<path value="MedicationOrder.eventHistory.modifierExtension"/>
<short value="Extensions that cannot be ignored"/>
<definition
value="May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions."/>
<comments
value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/>
<alias value="extensions"/>
<alias value="user content"/>
<alias value="modifiers"/>
<min value="0"/>
<max value="*"/>
<base>
<path value="BackboneElement.modifierExtension"/>
<min value="0"/>
<max value="*"/>
</base>
<type>
<code value="Extension"/>
</type>
<isModifier value="true"/>
<isSummary value="true"/>
<mapping>
<identity value="rim"/>
<map value="N/A"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.eventHistory.status">
<path value="MedicationOrder.eventHistory.status"/>
<short
value="active | on-hold | completed | entered-in-error | stopped | draft"/>
<definition value="The status for the event."/>
<min value="1"/>
<max value="1"/>
<base>
<path value="MedicationOrder.eventHistory.status"/>
<min value="1"/>
<max value="1"/>
</base>
<type>
<code value="code"/>
</type>
<binding>
<strength value="required"/>
<description
value="A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription."/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/ValueSet/medication-order-status"/>
</valueSetReference>
</binding>
<mapping>
<identity value="script10.6"/>
<map value="not mapped"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="not mapped"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.eventHistory.action">
<path value="MedicationOrder.eventHistory.action"/>
<short value="Action taken (e.g. verify, discontinue)"/>
<definition value="The action that was taken (e.g. verify, discontinue)."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.eventHistory.action"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<binding>
<strength value="example"/>
<description
value="A coded concept describing an action taken on a medication order."/>
</binding>
<mapping>
<identity value="script10.6"/>
<map value="not mapped"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="not mapped"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.eventHistory.dateTime">
<path value="MedicationOrder.eventHistory.dateTime"/>
<short value="The date at which the event happened"/>
<definition value="The date/time at which the event occurred."/>
<min value="1"/>
<max value="1"/>
<base>
<path value="MedicationOrder.eventHistory.dateTime"/>
<min value="1"/>
<max value="1"/>
</base>
<type>
<code value="dateTime"/>
</type>
<mapping>
<identity value="script10.6"/>
<map value="not mapped"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="not mapped"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.eventHistory.actor">
<path value="MedicationOrder.eventHistory.actor"/>
<short value="Who took the action"/>
<definition value="The person responsible for taking the action."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.eventHistory.actor"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="Reference"/>
<profile value="http://hl7.org/fhir/StructureDefinition/Practitioner"/>
</type>
<mapping>
<identity value="script10.6"/>
<map value="not mapped"/>
</mapping>
<mapping>
<identity value="rim"/>
<map value="not mapped"/>
</mapping>
</element>
<element id="MedicationOrder:dafmedicationorder.eventHistory.reason">
<path value="MedicationOrder.eventHistory.reason"/>
<short value="Reason the action was taken"/>
<definition value="The reason why the action was taken."/>
<min value="0"/>
<max value="1"/>
<base>
<path value="MedicationOrder.eventHistory.reason"/>
<min value="0"/>
<max value="1"/>
</base>
<type>
<code value="CodeableConcept"/>
</type>
<binding>
<strength value="example"/>
<description
value="A coded concept describing the reason for an action taken on a medication order."/>
</binding>
<mapping>
<identity value="rim"/>
<map value="not mapped"/>
</mapping>
</element>
</snapshot>
<differential>
<element id="MedicationOrder:dafmedicationorder">
<path value="MedicationOrder"/>
<name value="DAFMedicationOrder"/>
<mustSupport value="false"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.identifier">
<path value="MedicationOrder.identifier"/>
<min value="0"/>
<max value="*"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.medication[x]">
<path value="MedicationOrder.medication[x]"/>
<min value="1"/>
<max value="1"/>
<type>
<code value="CodeableConcept"/>
</type>
<type>
<code value="Reference"/>
<profile
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-medication"/>
</type>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
<binding>
<strength value="extensible"/>
<description value="Prescribable medications"/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/us/daf/ValueSet/daf-medication-codes"/>
</valueSetReference>
</binding>
</element>
<element id="MedicationOrder:dafmedicationorder.patient">
<path value="MedicationOrder.patient"/>
<min value="1"/>
<max value="1"/>
<type>
<code value="Reference"/>
<profile
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-patient"/>
</type>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.encounter">
<path value="MedicationOrder.encounter"/>
<type>
<code value="Reference"/>
<profile
value="http://hl7.org/fhir/us/daf/StructureDefinition/daf-encounter"/>
</type>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction">
<path value="MedicationOrder.dosageInstruction"/>
<min value="0"/>
<max value="*"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.text">
<path value="MedicationOrder.dosageInstruction.text"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.timing">
<path value="MedicationOrder.dosageInstruction.timing"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.asNeeded[x]">
<path value="MedicationOrder.dosageInstruction.asNeeded[x]"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element
id="MedicationOrder:dafmedicationorder.dosageInstruction.siteCodeableConcept">
<path value="MedicationOrder.dosageInstruction.siteCodeableConcept"/>
<min value="0"/>
<max value="1"/>
<type>
<code value="CodeableConcept"/>
</type>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
<binding>
<strength value="preferred"/>
<description
value="This identifies the body site at which the substance was administered"/>
<valueSetReference>
<reference value="http://hl7.org/fhir/us/daf/ValueSet/daf-bodysite"/>
</valueSetReference>
</binding>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.route">
<path value="MedicationOrder.dosageInstruction.route"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
<binding>
<strength value="preferred"/>
<description
value="This identifies the route of substance administration."/>
<valueSetReference>
<reference
value="http://hl7.org/fhir/us/daf/ValueSet/daf-medication-route"/>
</valueSetReference>
</binding>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.dose[x]">
<path value="MedicationOrder.dosageInstruction.dose[x]"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.dosageInstruction.rate[x]">
<path value="MedicationOrder.dosageInstruction.rate[x]"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.dispenseRequest">
<path value="MedicationOrder.dispenseRequest"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element
id="MedicationOrder:dafmedicationorder.dispenseRequest.validityPeriod">
<path value="MedicationOrder.dispenseRequest.validityPeriod"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element
id="MedicationOrder:dafmedicationorder.dispenseRequest.numberOfRepeatsAllowed">
<path value="MedicationOrder.dispenseRequest.numberOfRepeatsAllowed"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element id="MedicationOrder:dafmedicationorder.dispenseRequest.quantity">
<path value="MedicationOrder.dispenseRequest.quantity"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
<element
id="MedicationOrder:dafmedicationorder.dispenseRequest.expectedSupplyDuration">
<path value="MedicationOrder.dispenseRequest.expectedSupplyDuration"/>
<min value="0"/>
<max value="1"/>
<mustSupport value="true"/>
<isModifier value="false"/>
<isSummary value="false"/>
</element>
</differential>
</StructureDefinition>
© HL7.org 2011+. DAF STU 2 Ballot (v1.6.0-9635) generated on Thu, Aug 11, 2016 20:06+1000. QA Page
Links: Search |
Version History |
Table of Contents |
|
Propose a change