Quality Measure Implementation Guide
5.0.0 - STU5
Quality Measure Implementation Guide
5.0.0 - STU5
This page is part of the Quality Measure STU2 for FHIR R4 Implementation Guide (v5.0.0: STU5 (v5.0.0)) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions
| Active as of 2024-11-04 |
Definitions for the cqfm-rateAggregation extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Describes how to combine the information calculated, based on logic in each of several populations, into one summarized result. |
| Short | How is rate aggregation performed for this measure |
| Comments | The measure rate for an organization or clinician is based upon the entities’ aggregate data and summarizes the performance of the entity over a given time period (e.g., monthly, quarterly, yearly). The aggregated data are derived from the results of a specific measure algorithm and, if appropriate, the application of specific risk adjustment models. Can also be used to describe how to risk adjust the data based on supplemental data elements described in the eMeasure (e.g., pneumonia hospital measures antibiotic selection in the ICU versus non-ICU and then the roll-up of the two). This could be applied to aggregated cohort measure definitions (e.g., CDC's aggregate reporting for TB at the state level). |
| Control | 0..1 |
| 2. Extension.url | |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-rateAggregation |
| 4. Extension.value[x] | |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Describes how to combine the information calculated, based on logic in each of several populations, into one summarized result. Optional Extension Element - found in all resources. |
| Short | How is rate aggregation performed for this measureOptional Extensions Element |
| Comments | The measure rate for an organization or clinician is based upon the entities’ aggregate data and summarizes the performance of the entity over a given time period (e.g., monthly, quarterly, yearly). The aggregated data are derived from the results of a specific measure algorithm and, if appropriate, the application of specific risk adjustment models. Can also be used to describe how to risk adjust the data based on supplemental data elements described in the eMeasure (e.g., pneumonia hospital measures antibiotic selection in the ICU versus non-ICU and then the roll-up of the two). This could be applied to aggregated cohort measure definitions (e.g., CDC's aggregate reporting for TB at the state level). |
| Control | 0..1* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-rateAggregation |
| 4. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Describes how to combine the information calculated, based on logic in each of several populations, into one summarized result. |
| Short | How is rate aggregation performed for this measure |
| Comments | The measure rate for an organization or clinician is based upon the entities’ aggregate data and summarizes the performance of the entity over a given time period (e.g., monthly, quarterly, yearly). The aggregated data are derived from the results of a specific measure algorithm and, if appropriate, the application of specific risk adjustment models. Can also be used to describe how to risk adjust the data based on supplemental data elements described in the eMeasure (e.g., pneumonia hospital measures antibiotic selection in the ICU versus non-ICU and then the roll-up of the two). This could be applied to aggregated cohort measure definitions (e.g., CDC's aggregate reporting for TB at the state level). |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-rateAggregation |
| 8. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2019+ HL7 International / Clinical Quality Information. Package hl7.fhir.us.cqfmeasures#5.0.0 based on FHIR 4.0.1. Generated 2024-11-04
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change