US Core Implementation Guide
7.0.0 - STU7 United States of America flag

This page is part of the US Core (v7.0.0: STU7) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions. Page versions: STU6.1 STU6 STU5 STU4 STU3 STU2 STU1

Resource Profile: USCoreImmunizationProfile - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 3

Definitions for the us-core-immunization resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Immunization
Must Supportfalse
Invariantsus-core-5: SHOULD have a translation to the NDC value set (vaccineCode.coding.where(system='http://hl7.org/fhir/sid/cvx').exists() implies vaccineCode.coding.where(system='http://hl7.org/fhir/sid/ndc').exists())
2. Immunization.status
BindingThe codes SHALL be taken from ImmunizationStatusCodes
(required to http://hl7.org/fhir/ValueSet/immunization-status)
Must Supporttrue
4. Immunization.statusReason
BindingFor example codes, see ImmunizationStatusReasonCodes
(example to http://hl7.org/fhir/ValueSet/immunization-status-reason)
Must Supporttrue
6. Immunization.vaccineCode
ShortVaccine Product Type (bind to CVX)
BindingUnless not suitable, these codes SHALL be taken from CVX Vaccines Administered Vaccine Set .
(extensible to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.6)
Must Supporttrue
8. Immunization.patient
TypeReference(US Core Patient Profile)
Must Supporttrue
Alternate NamesPatient
10. Immunization.encounter
ShortEncounter the immunization was part of
TypeReference(US Core Encounter Profile)
Must Supporttrue
12. Immunization.occurrence[x]
TypeChoice of: dateTime, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Must Support TypesdateTime
14. Immunization.primarySource
Definition

Indicates whether the data contained in the resource was captured by the individual/organization which was responsible for the administration of the vaccine rather than as 'secondary reported' data documented by a third party. A value of 'true' means this data originated with the individual/organization which was responsible for the administration of the vaccine.

Comments

This updated definition is adopted from the FHIR R5 Immunization resource.

Must Supporttrue
16. Immunization.location
ShortWhere the vaccine was administered
TypeReference(US Core Location Profile)
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here

0. Immunization
Definition

Describes the event of a patient being administered a vaccine or a record of an immunization as reported by a patient, a clinician or another party.

ShortImmunization event information
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
us-core-5: SHOULD have a translation to the NDC value set (vaccineCode.coding.where(system='http://hl7.org/fhir/sid/cvx').exists() implies vaccineCode.coding.where(system='http://hl7.org/fhir/sid/ndc').exists())
2. Immunization.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Immunization.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Immunization.status
Definition

Indicates the current status of the immunization event.

Shortcompleted | entered-in-error | not-done
Comments

Will generally be set to show that the immunization has been completed or not done. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from ImmunizationStatusCodeshttp://hl7.org/fhir/ValueSet/immunization-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/immunization-status)
Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains statuses entered-in-error and not-done which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Immunization.statusReason
Definition

Indicates the reason the immunization event was not performed.

ShortReason not done
Comments

This is generally only used for the status of "not-done". The reason for performing the immunization event is captured in reasonCode, not here.

Control0..1
BindingFor example codes, see ImmunizationStatusReasonCodeshttp://hl7.org/fhir/ValueSet/immunization-status-reason
(example to http://hl7.org/fhir/ValueSet/immunization-status-reason)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Immunization.vaccineCode
Definition

Vaccine that was administered or was to be administered.

ShortVaccine Product Type (bind to CVX)Vaccine product administered
Control1..1
This element is affected by the following invariants: us-core-5
BindingUnless not suitable, these codes SHALL be taken from For example codes, see CVX Vaccines Administered Vaccine Set .http://hl7.org/fhir/ValueSet/vaccine-code
(extensible to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.6)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Immunization.patient
Definition

The patient who either received or did not receive the immunization.

ShortWho was immunized
Control1..1
TypeReference(US Core Patient Profile, Patient)
Is Modifierfalse
Must Supporttrue
Summarytrue
Alternate NamesPatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Immunization.encounter
Definition

The visit or admission or other contact between patient and health care provider the immunization was performed as part of.

ShortEncounter the immunization was part ofEncounter immunization was part of
Control0..1
TypeReference(US Core Encounter Profile, Encounter)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Immunization.occurrence[x]
Definition

Date vaccine administered or was to be administered.

ShortVaccine administration date
Comments

When immunizations are given a specific date and time should always be known. When immunizations are patient reported, a specific date might not be known. Although partial dates are allowed, an adult patient might not be able to recall the year a childhood immunization was given. An exact date is always preferable, but the use of the String data type is acceptable when an exact date is not known. A small number of vaccines (e.g. live oral typhoid vaccine) are given as a series of patient self-administered dose over a span of time. In cases like this, often, only the first dose (typically a provider supervised dose) is recorded with the occurrence indicating the date/time of the first dose.

Control1..1
TypeChoice of: dateTime, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Must Support TypesdateTime
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Immunization.primarySource
Definition

Indicates whether the data contained in the resource was captured by the individual/organization which was responsible for the administration of the vaccine rather than as 'secondary reported' data documented by a third party. A value of 'true' means this data originated with the individual/organization which was responsible for the administration of the vaccine.


An indication that the content of the record is based on information from the person who administered the vaccine. This reflects the context under which the data was originally recorded.

ShortIndicates context the data was recorded in
Comments

This updated definition is adopted from the FHIR R5 Immunization resource.


Reflects the “reliability” of the content.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Immunization.location
Definition

The service delivery location where the vaccine administration occurred.

ShortWhere the vaccine was administeredWhere immunization occurred
Control0..1
TypeReference(US Core Location Profile, Location)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Immunization.isSubpotent
Definition

Indication if a dose is considered to be subpotent. By default, a dose should be considered to be potent.

ShortDose potency
Comments

Typically, the recognition of the dose being sub-potent is retrospective, after the administration (ex. notification of a manufacturer recall after administration). However, in the case of a partial administration (the patient moves unexpectedly and only some of the dose is actually administered), subpotency may be recognized immediately, but it is still important to record the event.

Control0..1
Typeboolean
Is Modifiertrue because This element is labeled as a modifier because an immunization event with a subpotent vaccine doesn't protect the patient the same way as a potent dose.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Meaning if MissingBy default, a dose should be considered to be potent.
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Immunization
Definition

Describes the event of a patient being administered a vaccine or a record of an immunization as reported by a patient, a clinician or another party.

ShortImmunization event information
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
us-core-5: SHOULD have a translation to the NDC value set (vaccineCode.coding.where(system='http://hl7.org/fhir/sid/cvx').exists() implies vaccineCode.coding.where(system='http://hl7.org/fhir/sid/ndc').exists())
2. Immunization.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Immunization.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Immunization.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Immunization.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Immunization.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Immunization.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Immunization.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Immunization.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Immunization.identifier
Definition

A unique identifier assigned to this immunization record.

ShortBusiness identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Immunization.status
Definition

Indicates the current status of the immunization event.

Shortcompleted | entered-in-error | not-done
Comments

Will generally be set to show that the immunization has been completed or not done. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from ImmunizationStatusCodes
(required to http://hl7.org/fhir/ValueSet/immunization-status)
Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains statuses entered-in-error and not-done which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Immunization.statusReason
Definition

Indicates the reason the immunization event was not performed.

ShortReason not done
Comments

This is generally only used for the status of "not-done". The reason for performing the immunization event is captured in reasonCode, not here.

Control0..1
BindingFor example codes, see ImmunizationStatusReasonCodes
(example to http://hl7.org/fhir/ValueSet/immunization-status-reason)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Immunization.vaccineCode
Definition

Vaccine that was administered or was to be administered.

ShortVaccine Product Type (bind to CVX)
Control1..1
This element is affected by the following invariants: us-core-5
BindingUnless not suitable, these codes SHALL be taken from CVX Vaccines Administered Vaccine Set .
(extensible to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113762.1.4.1010.6)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Immunization.patient
Definition

The patient who either received or did not receive the immunization.

ShortWho was immunized
Control1..1
TypeReference(US Core Patient Profile)
Is Modifierfalse
Must Supporttrue
Summarytrue
Alternate NamesPatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Immunization.encounter
Definition

The visit or admission or other contact between patient and health care provider the immunization was performed as part of.

ShortEncounter the immunization was part of
Control0..1
TypeReference(US Core Encounter Profile)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Immunization.occurrence[x]
Definition

Date vaccine administered or was to be administered.

ShortVaccine administration date
Comments

When immunizations are given a specific date and time should always be known. When immunizations are patient reported, a specific date might not be known. Although partial dates are allowed, an adult patient might not be able to recall the year a childhood immunization was given. An exact date is always preferable, but the use of the String data type is acceptable when an exact date is not known. A small number of vaccines (e.g. live oral typhoid vaccine) are given as a series of patient self-administered dose over a span of time. In cases like this, often, only the first dose (typically a provider supervised dose) is recorded with the occurrence indicating the date/time of the first dose.

Control1..1
TypeChoice of: dateTime, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Must Support TypesdateTime
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Immunization.recorded
Definition

The date the occurrence of the immunization was first captured in the record - potentially significantly after the occurrence of the event.

ShortWhen the immunization was first captured in the subject's record
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Immunization.primarySource
Definition

Indicates whether the data contained in the resource was captured by the individual/organization which was responsible for the administration of the vaccine rather than as 'secondary reported' data documented by a third party. A value of 'true' means this data originated with the individual/organization which was responsible for the administration of the vaccine.

ShortIndicates context the data was recorded in
Comments

This updated definition is adopted from the FHIR R5 Immunization resource.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Immunization.reportOrigin
Definition

The source of the data when the report of the immunization event is not based on information from the person who administered the vaccine.

ShortIndicates the source of a secondarily reported record
Comments

Should not be populated if primarySource = True, not required even if primarySource = False.

Control0..1
BindingFor example codes, see ImmunizationOriginCodes
(example to http://hl7.org/fhir/ValueSet/immunization-origin)

The source of the data for a record which is not from a primary source.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Immunization.location
Definition

The service delivery location where the vaccine administration occurred.

ShortWhere the vaccine was administered
Control0..1
TypeReference(US Core Location Profile)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Immunization.manufacturer
Definition

Name of vaccine manufacturer.

ShortVaccine manufacturer
Control0..1
TypeReference(Organization)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Immunization.lotNumber
Definition

Lot number of the vaccine product.

ShortVaccine lot number
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Immunization.expirationDate
Definition

Date vaccine batch expires.

ShortVaccine expiration date
Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Immunization.site
Definition

Body site where vaccine was administered.

ShortBody site vaccine was administered
Control0..1
BindingFor example codes, see CodesForImmunizationSiteOfAdministration
(example to http://hl7.org/fhir/ValueSet/immunization-site)

The site at which the vaccine was administered.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Immunization.route
Definition

The path by which the vaccine product is taken into the body.

ShortHow vaccine entered body
Control0..1
BindingFor example codes, see ImmunizationRouteCodes
(example to http://hl7.org/fhir/ValueSet/immunization-route)

The route by which the vaccine was administered.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Immunization.doseQuantity
Definition

The quantity of vaccine product that was administered.

ShortAmount of vaccine administered
Control0..1
TypeQuantity(SimpleQuantity)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Immunization.performer
Definition

Indicates who performed the immunization event.

ShortWho performed event
Control0..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Immunization.performer.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
56. Immunization.performer.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. Immunization.performer.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
60. Immunization.performer.function
Definition

Describes the type of performance (e.g. ordering provider, administering provider, etc.).

ShortWhat type of performance was done
Control0..1
BindingUnless not suitable, these codes SHALL be taken from ImmunizationFunctionCodes
(extensible to http://hl7.org/fhir/ValueSet/immunization-function)

The role a practitioner or organization plays in the immunization event.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Immunization.performer.actor
Definition

The practitioner or organization who performed the action.

ShortIndividual or organization who was performing
Comments

When the individual practitioner who performed the action is known, it is best to send.

Control1..1
TypeReference(Practitioner, PractitionerRole, Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Immunization.note
Definition

Extra information about the immunization that is not conveyed by the other attributes.

ShortAdditional immunization notes
Control0..*
TypeAnnotation
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Immunization.reasonCode
Definition

Reasons why the vaccine was administered.

ShortWhy immunization occurred
Control0..*
BindingFor example codes, see ImmunizationReasonCodes
(example to http://hl7.org/fhir/ValueSet/immunization-reason)

The reason why a vaccine was administered.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Immunization.reasonReference
Definition

Condition, Observation or DiagnosticReport that supports why the immunization was administered.

ShortWhy immunization occurred
Control0..*
TypeReference(Condition, Observation, DiagnosticReport)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Immunization.isSubpotent
Definition

Indication if a dose is considered to be subpotent. By default, a dose should be considered to be potent.

ShortDose potency
Comments

Typically, the recognition of the dose being sub-potent is retrospective, after the administration (ex. notification of a manufacturer recall after administration). However, in the case of a partial administration (the patient moves unexpectedly and only some of the dose is actually administered), subpotency may be recognized immediately, but it is still important to record the event.

Control0..1
Typeboolean
Is Modifiertrue because This element is labeled as a modifier because an immunization event with a subpotent vaccine doesn't protect the patient the same way as a potent dose.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Meaning if MissingBy default, a dose should be considered to be potent.
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Immunization.subpotentReason
Definition

Reason why a dose is considered to be subpotent.

ShortReason for being subpotent
Control0..*
BindingFor example codes, see ImmunizationSubpotentReason
(example to http://hl7.org/fhir/ValueSet/immunization-subpotent-reason)

The reason why a dose is considered to be subpotent.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Immunization.education
Definition

Educational material presented to the patient (or guardian) at the time of vaccine administration.

ShortEducational material presented to patient
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
imm-1: One of documentType or reference SHALL be present (documentType.exists() or reference.exists())
76. Immunization.education.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
78. Immunization.education.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
80. Immunization.education.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. Immunization.education.documentType
Definition

Identifier of the material presented to the patient.

ShortEducational material document identifier
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Immunization.education.reference
Definition

Reference pointer to the educational material given to the patient if the information was on line.

ShortEducational material reference pointer
Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Immunization.education.publicationDate
Definition

Date the educational material was published.

ShortEducational material publication date
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Immunization.education.presentationDate
Definition

Date the educational material was given to the patient.

ShortEducational material presentation date
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Immunization.programEligibility
Definition

Indicates a patient's eligibility for a funding program.

ShortPatient eligibility for a vaccination program
Control0..*
BindingFor example codes, see ImmunizationProgramEligibility
(example to http://hl7.org/fhir/ValueSet/immunization-program-eligibility)

The patient's eligibility for a vaccation program.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Immunization.fundingSource
Definition

Indicates the source of the vaccine actually administered. This may be different than the patient eligibility (e.g. the patient may be eligible for a publically purchased vaccine but due to inventory issues, vaccine purchased with private funds was actually administered).

ShortFunding source for the vaccine
Control0..1
BindingFor example codes, see ImmunizationFundingSource
(example to http://hl7.org/fhir/ValueSet/immunization-funding-source)

The source of funding used to purchase the vaccine administered.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Immunization.reaction
Definition

Categorical data indicating that an adverse event is associated in time to an immunization.

ShortDetails of a reaction that follows immunization
Comments

A reaction may be an indication of an allergy or intolerance and, if this is determined to be the case, it should be recorded as a new AllergyIntolerance resource instance as most systems will not query against past Immunization.reaction elements.

Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Immunization.reaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
98. Immunization.reaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
100. Immunization.reaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
102. Immunization.reaction.date
Definition

Date of reaction to the immunization.

ShortWhen reaction started
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Immunization.reaction.detail
Definition

Details of the reaction.

ShortAdditional information on reaction
Control0..1
TypeReference(Observation)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Immunization.reaction.reported
Definition

Self-reported indicator.

ShortIndicates self-reported reaction
Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. Immunization.protocolApplied
Definition

The protocol (set of recommendations) being followed by the provider who administered the dose.

ShortProtocol followed by the provider
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Immunization.protocolApplied.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
112. Immunization.protocolApplied.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
114. Immunization.protocolApplied.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
116. Immunization.protocolApplied.series
Definition

One possible path to achieve presumed immunity against a disease - within the context of an authority.

ShortName of vaccine series
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Immunization.protocolApplied.authority
Definition

Indicates the authority who published the protocol (e.g. ACIP) that is being followed.

ShortWho is responsible for publishing the recommendations
Control0..1
TypeReference(Organization)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Immunization.protocolApplied.targetDisease
Definition

The vaccine preventable disease the dose is being administered against.

ShortVaccine preventatable disease being targetted
Control0..*
BindingFor example codes, see ImmunizationTargetDiseaseCodes
(example to http://hl7.org/fhir/ValueSet/immunization-target-disease)

The vaccine preventable disease the dose is being administered for.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Immunization.protocolApplied.doseNumber[x]
Definition

Nominal position in a series.

ShortDose number within series
Comments

The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).

Control1..1
TypeChoice of: positiveInt, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Immunization.protocolApplied.seriesDoses[x]
Definition

The recommended number of doses to achieve immunity.

ShortRecommended number of doses for immunity
Comments

The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).

Control0..1
TypeChoice of: positiveInt, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))