FHIR Extensions Pack
5.2.0 - February 2025 International flag

This page is part of the FHIR Core Extensions Registry (v5.2.0: Release 5.2) based on FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version. For a full list of available versions, see the Directory of published versions

Extension: ActivityStatusDate - Detailed Descriptions

Page standards status: Deprecated Maturity Level: 1

Definitions for the valueset-activityStatusDate extension.

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

The date when the associated Value Set Definition Version activity status is in effect.


Optional Extension Element - found in all resources.

ShortDate when the activity status is in effectOptional Extensions Element
Comments

When the Activity Status is set to “Active”, the Activity Status Date defines the Effective Date which is the date-time the Value Set Definition Version becomes active. When the Activity Status is set to “Inactive”, the Activity Status Date is the date-time when the Value Set Definition version becomes Inactive. This cycle may happen multiple times. The specified time is expected to be one second after midnight UTC of the Activity Status Date. The date may be in the future.

It is strongly encouraged that the Activity Status be set such that no more than one Value Set Definition Version for a single Value Set Identifier can have an Activity Status of ACTIVE at the same time within a single realm. In cases where this is not true, evaluation of the alignment of a Value Set Expansion Code Set to a specific Value Set Definition, as referenced in a CD, will be problematic.

Changes to this element should never result in a new Value Set Definition Version.

Control0..1*
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
    • 4. Extension.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttp://hl7.org/fhir/StructureDefinition/valueset-activityStatusDate
    6. Extension.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortValue of extension
    Control10..1
    This element is affected by the following invariants: ext-1
    Typedate, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Extension
    Definition

    The date when the associated Value Set Definition Version activity status is in effect.

    ShortDate when the activity status is in effect
    Comments

    When the Activity Status is set to “Active”, the Activity Status Date defines the Effective Date which is the date-time the Value Set Definition Version becomes active. When the Activity Status is set to “Inactive”, the Activity Status Date is the date-time when the Value Set Definition version becomes Inactive. This cycle may happen multiple times. The specified time is expected to be one second after midnight UTC of the Activity Status Date. The date may be in the future.

    It is strongly encouraged that the Activity Status be set such that no more than one Value Set Definition Version for a single Value Set Identifier can have an Activity Status of ACTIVE at the same time within a single realm. In cases where this is not true, evaluation of the alignment of a Value Set Expansion Code Set to a specific Value Set Definition, as referenced in a CD, will be problematic.

    Changes to this element should never result in a new Value Set Definition Version.

    Control0..1
    2. Extension.extension
    Control0..0
    4. Extension.url
    Fixed Valuehttp://hl7.org/fhir/StructureDefinition/valueset-activityStatusDate
    6. Extension.value[x]
    Control1..?
    Typedate, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

    Guidance on how to interpret the contents of this table can be found here

    0. Extension
    Definition

    The date when the associated Value Set Definition Version activity status is in effect.

    ShortDate when the activity status is in effect
    Comments

    When the Activity Status is set to “Active”, the Activity Status Date defines the Effective Date which is the date-time the Value Set Definition Version becomes active. When the Activity Status is set to “Inactive”, the Activity Status Date is the date-time when the Value Set Definition version becomes Inactive. This cycle may happen multiple times. The specified time is expected to be one second after midnight UTC of the Activity Status Date. The date may be in the future.

    It is strongly encouraged that the Activity Status be set such that no more than one Value Set Definition Version for a single Value Set Identifier can have an Activity Status of ACTIVE at the same time within a single realm. In cases where this is not true, evaluation of the alignment of a Value Set Expansion Code Set to a specific Value Set Definition, as referenced in a CD, will be problematic.

    Changes to this element should never result in a new Value Set Definition Version.

    Control0..1
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    2. Extension.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    This element is affected by the following invariants: ele-1
    Typeid
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    4. Extension.extension
    Definition

    An Extension

    ShortExtension
    Control0..0
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
      • 6. Extension.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valuehttp://hl7.org/fhir/StructureDefinition/valueset-activityStatusDate
      8. Extension.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control1..1
      This element is affected by the following invariants: ext-1
      Typedate
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))