FHIR Extensions Pack
5.2.0 - February 2025
FHIR Extensions Pack
5.2.0 - February 2025
This page is part of the FHIR Core Extensions Registry (v5.2.0: Release 5.2) based on FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version. For a full list of available versions, see the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 0 |
Definitions for the observation-v2-subid extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | A complex extension for capturing the components that can be used to define the structure of the V2 observation/result segments (OBX) within an observation report segment (OBR) (matches the V2 OG data type). Optional Extension Element - found in all resources. |
| Short | Observation GrouperOptional Extensions Element |
| Control | 0..1* |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension:original-sub-identifier | |
| Slice Name | original-sub-identifier |
| Definition | The Original Sub-Identifier component represents the original data type used in OBX4 to enable backwards compatibility to continue use of the original format to provide OBX segment grouping. |
| Short | Original Sub-IdentifierAdditional content defined by implementations |
| Comments | Reflects OBX-4 data type pre V2.8.2 |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 4. Extension.extension:original-sub-identifier.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:original-sub-identifier.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | original-sub-identifier |
| 8. Extension.extension:original-sub-identifier.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 This element is affected by the following invariants: ext-1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Extension.extension:group | |
| Slice Name | group |
| Definition | The Group component indicates the group and its sequence within the OBR segment that the OBX segment is a part of. |
| Short | GroupAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 12. Extension.extension:group.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 14. Extension.extension:group.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | group |
| 16. Extension.extension:group.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 This element is affected by the following invariants: ext-1 |
| Type | decimal, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | The Sequence component indicates the sequence within the group as defined in OG-2. |
| Short | SequenceAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 20. Extension.extension:sequence.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:sequence.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | sequence |
| 24. Extension.extension:sequence.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 This element is affected by the following invariants: ext-1 |
| Type | decimal, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:identifier | |
| Slice Name | identifier |
| Definition | The Identifier component enables assignment of an identifier to a result component, for example an isolate in a microbiology message. |
| Short | IdentifierAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 28. Extension.extension:identifier.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 30. Extension.extension:identifier.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | identifier |
| 32. Extension.extension:identifier.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 This element is affected by the following invariants: ext-1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/observation-v2-subid |
| 36. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 This element is affected by the following invariants: ext-1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | A complex extension for capturing the components that can be used to define the structure of the V2 observation/result segments (OBX) within an observation report segment (OBR) (matches the V2 OG data type). |
| Short | Observation Grouper |
| Control | 0..1 |
| 2. Extension.extension:original-sub-identifier | |
| Slice Name | original-sub-identifier |
| Definition | The Original Sub-Identifier component represents the original data type used in OBX4 to enable backwards compatibility to continue use of the original format to provide OBX segment grouping. |
| Short | Original Sub-Identifier |
| Comments | Reflects OBX-4 data type pre V2.8.2 |
| Control | 0..1 |
| Type | Extension |
| 4. Extension.extension:original-sub-identifier.extension | |
| Control | 0..0 |
| 6. Extension.extension:original-sub-identifier.url | |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | original-sub-identifier |
| 8. Extension.extension:original-sub-identifier.value[x] | |
| Control | 1..? |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 10. Extension.extension:group | |
| Slice Name | group |
| Definition | The Group component indicates the group and its sequence within the OBR segment that the OBX segment is a part of. |
| Short | Group |
| Control | 0..1 |
| Type | Extension |
| 12. Extension.extension:group.extension | |
| Control | 0..0 |
| 14. Extension.extension:group.url | |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | group |
| 16. Extension.extension:group.value[x] | |
| Control | 1..? |
| Type | decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 18. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | The Sequence component indicates the sequence within the group as defined in OG-2. |
| Short | Sequence |
| Control | 0..1 |
| Type | Extension |
| 20. Extension.extension:sequence.extension | |
| Control | 0..0 |
| 22. Extension.extension:sequence.url | |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | sequence |
| 24. Extension.extension:sequence.value[x] | |
| Control | 1..? |
| Type | decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 26. Extension.extension:identifier | |
| Slice Name | identifier |
| Definition | The Identifier component enables assignment of an identifier to a result component, for example an isolate in a microbiology message. |
| Short | Identifier |
| Control | 0..1 |
| Type | Extension |
| 28. Extension.extension:identifier.extension | |
| Control | 0..0 |
| 30. Extension.extension:identifier.url | |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | identifier |
| 32. Extension.extension:identifier.value[x] | |
| Control | 1..? |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 34. Extension.url | |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/observation-v2-subid |
| 36. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | A complex extension for capturing the components that can be used to define the structure of the V2 observation/result segments (OBX) within an observation report segment (OBR) (matches the V2 OG data type). |
| Short | Observation Grouper |
| Control | 0..1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:original-sub-identifier | |
| Slice Name | original-sub-identifier |
| Definition | The Original Sub-Identifier component represents the original data type used in OBX4 to enable backwards compatibility to continue use of the original format to provide OBX segment grouping. |
| Short | Original Sub-Identifier |
| Comments | Reflects OBX-4 data type pre V2.8.2 |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:original-sub-identifier.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:original-sub-identifier.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:original-sub-identifier.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | original-sub-identifier |
| 14. Extension.extension:original-sub-identifier.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 This element is affected by the following invariants: ext-1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:group | |
| Slice Name | group |
| Definition | The Group component indicates the group and its sequence within the OBR segment that the OBX segment is a part of. |
| Short | Group |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:group.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:group.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:group.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | group |
| 24. Extension.extension:group.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 This element is affected by the following invariants: ext-1 |
| Type | decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | The Sequence component indicates the sequence within the group as defined in OG-2. |
| Short | Sequence |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 28. Extension.extension:sequence.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:sequence.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:sequence.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | sequence |
| 34. Extension.extension:sequence.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 This element is affected by the following invariants: ext-1 |
| Type | decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:identifier | |
| Slice Name | identifier |
| Definition | The Identifier component enables assignment of an identifier to a result component, for example an isolate in a microbiology message. |
| Short | Identifier |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 38. Extension.extension:identifier.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 40. Extension.extension:identifier.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:identifier.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | identifier |
| 44. Extension.extension:identifier.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 This element is affected by the following invariants: ext-1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/observation-v2-subid |
| 48. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 This element is affected by the following invariants: ext-1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2022+ HL7 International / FHIR Infrastructure. Package hl7.fhir.uv.extensions#5.2.0 based on FHIR 5.0.0. Generated 2025-02-10
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change