FHIR Extensions Pack
5.2.0-ballot - 5.2.0 Ballot - September 2024)
FHIR Extensions Pack
5.2.0-ballot - 5.2.0 Ballot - September 2024)
This page is part of the FHIR Core Extensions Registry (v5.2.0-ballot: Release 5.2) based on FHIR (HL7® FHIR® Standard) v5.0.0. The current version which supersedes this version is 5.1.0. For a full list of available versions, see the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 3 |
Definitions for the cqf-isSelective extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Allows a given data requirement to be identified as "selective", meaning that it can be used as an additive criteria to filter a population. A selective data requirement is guaranteed to define a subset (not necessarily proper) of the initial population of an artifact. If multiple data requirements are marked selective, they all apply (i.e. AND semantics). |
| Short | Primary criteria? |
| Comments | This extension is useful for helping implementing systems determine which data requirements are expected to be most selective of the target population. A common use case is to identify a subset of the data requirements for an artifact as "selective", meaning that they can be used as an initial filter to establish the overall set of data. For example, the selective requirements can be used to construct an initial query or queries for data, with the non-selective requirements used for subsequent filtering on the resulting data. |
| Control | 0..1 |
| 2. Extension.url | |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/cqf-isSelective |
| 4. Extension.value[x] | |
| Control | 1..? |
| Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Allows a given data requirement to be identified as "selective", meaning that it can be used as an additive criteria to filter a population. A selective data requirement is guaranteed to define a subset (not necessarily proper) of the initial population of an artifact. If multiple data requirements are marked selective, they all apply (i.e. AND semantics). Optional Extension Element - found in all resources. |
| Short | Primary criteria?Optional Extensions Element |
| Comments | This extension is useful for helping implementing systems determine which data requirements are expected to be most selective of the target population. A common use case is to identify a subset of the data requirements for an artifact as "selective", meaning that they can be used as an initial filter to establish the overall set of data. For example, the selective requirements can be used to construct an initial query or queries for data, with the non-selective requirements used for subsequent filtering on the resulting data. |
| Control | 0..1* |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/cqf-isSelective |
| 4. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 This element is affected by the following invariants: ext-1 |
| Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Allows a given data requirement to be identified as "selective", meaning that it can be used as an additive criteria to filter a population. A selective data requirement is guaranteed to define a subset (not necessarily proper) of the initial population of an artifact. If multiple data requirements are marked selective, they all apply (i.e. AND semantics). |
| Short | Primary criteria? |
| Comments | This extension is useful for helping implementing systems determine which data requirements are expected to be most selective of the target population. A common use case is to identify a subset of the data requirements for an artifact as "selective", meaning that they can be used as an initial filter to establish the overall set of data. For example, the selective requirements can be used to construct an initial query or queries for data, with the non-selective requirements used for subsequent filtering on the resulting data. |
| Control | 0..1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/cqf-isSelective |
| 8. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 This element is affected by the following invariants: ext-1 |
| Type | boolean |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2022+ HL7 International / FHIR Infrastructure. Package hl7.fhir.uv.extensions#5.2.0-ballot based on FHIR 5.0.0. Generated 2024-07-30
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change