FHIR Extensions Pack
5.2.0-ballot - 5.2.0 Ballot - September 2024) International flag

This page is part of the FHIR Core Extensions Registry (v5.2.0-ballot: Release 5.2) based on FHIR (HL7® FHIR® Standard) v5.0.0. The current version which supersedes this version is 5.1.0. For a full list of available versions, see the Directory of published versions

Extension: OfficialAddress - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 1

Definitions for the address-official extension.

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

This extension allows to specify if this address is or it is not the official address, or to indicate that this is the official address for that country (true assumed). Note: It does not make sense to repeat this extension without the valueCodeableConcept to specify jurisdictions.

ShortOfficial Address
2. Extension.url
Fixed Valuehttp://hl7.org/fhir/StructureDefinition/address-official
4. Extension.valueBoolean:valueBoolean
Slice NamevalueBoolean
Definition

It specifies if this address is or it is not the official address.

ShortOfficial address true/false
Control0..1
Typeboolean
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
6. Extension.valueCodeableConcept:valueCodeableConcept
Slice NamevalueCodeableConcept
Definition

It specifies that this address is the official address for the indicated country.

ShortOfficial address for country X
Control0..1
BindingThe codes SHALL be taken from Jurisdiction ValueSet
(required to http://terminology.hl7.org/ValueSet/jurisdiction)
TypeCodeableConcept

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

This extension allows to specify if this address is or it is not the official address, or to indicate that this is the official address for that country (true assumed). Note: It does not make sense to repeat this extension without the valueCodeableConcept to specify jurisdictions.


Optional Extension Element - found in all resources.

ShortOfficial AddressOptional Extensions Element
Control0..*
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/StructureDefinition/address-official
4. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..1
This element is affected by the following invariants: ext-1
TypeChoice of: boolean, CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
    • 6. Extension.value[x]:valueBoolean
    Slice NamevalueBoolean
    Definition

    It specifies if this address is or it is not the official address.


    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortOfficial address true/falseValue of extension
    Control0..1
    This element is affected by the following invariants: ext-1
    Typeboolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Extension.value[x]:valueCodeableConcept
    Slice NamevalueCodeableConcept
    Definition

    It specifies that this address is the official address for the indicated country.


    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortOfficial address for country XValue of extension
    Control0..1
    This element is affected by the following invariants: ext-1
    BindingThe codes SHALL be taken from For codes, see Jurisdiction ValueSet
    (required to http://terminology.hl7.org/ValueSet/jurisdiction)
    TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Extension
    Definition

    This extension allows to specify if this address is or it is not the official address, or to indicate that this is the official address for that country (true assumed). Note: It does not make sense to repeat this extension without the valueCodeableConcept to specify jurisdictions.

    ShortOfficial Address
    Control0..*
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    2. Extension.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    This element is affected by the following invariants: ele-1
    Typeid
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    4. Extension.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
      • 6. Extension.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valuehttp://hl7.org/fhir/StructureDefinition/address-official
      8. Extension.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control0..1
      This element is affected by the following invariants: ext-1
      TypeChoice of: boolean, CodeableConcept
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
      • type @ $this
        • 10. Extension.value[x]:valueBoolean
        Slice NamevalueBoolean
        Definition

        It specifies if this address is or it is not the official address.

        ShortOfficial address true/false
        Control0..1
        This element is affected by the following invariants: ext-1
        Typeboolean
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Extension.value[x]:valueCodeableConcept
        Slice NamevalueCodeableConcept
        Definition

        It specifies that this address is the official address for the indicated country.

        ShortOfficial address for country X
        Control0..1
        This element is affected by the following invariants: ext-1
        BindingThe codes SHALL be taken from Jurisdiction ValueSet
        (required to http://terminology.hl7.org/ValueSet/jurisdiction)
        TypeCodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))