FHIR Extensions Pack
5.1.0 - 5.1.0 (April 2024)
FHIR Extensions Pack
5.1.0 - 5.1.0 (April 2024)
This page is part of the FHIR Core Extensions Registry (v5.1.0: Release 5.1) based on FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 3 |
Definitions for the valueset-unclosed extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Marks that the expansion is incomplete, and values other than those listed may be valid. This SHALL only be used when post-coordinated codes are allowed or codes with a grammar, and no practical expansion can be produced. |
| Short | The expansion is incomplete (perhaps because of post-coordination) |
| Comments | This extension exists to allow for definition and use of value sets that are unbounded by definition, including those for which it may always be impractical to set bounds. This extension is not used to communicate value sets that are limited for practical reasons. The offset and total elements of the expansion support that use case. |
| Control | 0..1 |
| Is Modifier | false |
| 2. Extension.extension | |
| Control | 0..0 |
| 4. Extension.url | |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/valueset-unclosed |
| 6. Extension.value[x] | |
| Control | 1..? |
| Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Marks that the expansion is incomplete, and values other than those listed may be valid. This SHALL only be used when post-coordinated codes are allowed or codes with a grammar, and no practical expansion can be produced. Optional Extension Element - found in all resources. |
| Short | The expansion is incomplete (perhaps because of post-coordination)Optional Extensions Element |
| Comments | This extension exists to allow for definition and use of value sets that are unbounded by definition, including those for which it may always be impractical to set bounds. This extension is not used to communicate value sets that are limited for practical reasons. The offset and total elements of the expansion support that use case. |
| Control | 0..1* |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/valueset-unclosed |
| 6. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 This element is affected by the following invariants: ext-1 |
| Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Marks that the expansion is incomplete, and values other than those listed may be valid. This SHALL only be used when post-coordinated codes are allowed or codes with a grammar, and no practical expansion can be produced. |
| Short | The expansion is incomplete (perhaps because of post-coordination) |
| Comments | This extension exists to allow for definition and use of value sets that are unbounded by definition, including those for which it may always be impractical to set bounds. This extension is not used to communicate value sets that are limited for practical reasons. The offset and total elements of the expansion support that use case. |
| Control | 0..1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/StructureDefinition/valueset-unclosed |
| 8. Extension.value[x] | |
| Definition |
Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 This element is affected by the following invariants: ext-1 |
| Type | boolean |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2022+ HL7 International / FHIR Infrastructure. Package hl7.fhir.uv.extensions#5.1.0 based on FHIR 5.0.0. Generated 2024-04-27
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change
Changed: