HL7.FHIR.UV.EXTENSIONS\Questionnaire Constraint - Definitions

This page is part of the FHIR Core Extensions Registry (v5.1.0: Release 5.1) based on FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Extension: QConstraint - Detailed Descriptions

Page standards status: Deprecated

Maturity Level: 3

Definitions for the questionnaire-constraint extension.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	An invariant that must be satisfied before responses to the questionnaire can be considered "complete".
Short	Constraint
Comments	This maps to the ElementDefinition.constraint element. See additional guidance and examples in the SDC implementation guide.
Control	0..*
2. Extension.extension:key
Slice Name	key
Definition	Unique id for the constraint within the questionnaire.
Short	Unique identifier
Control	1..1
Type	Extension
4. Extension.extension:key.extension
Control	0..0
6. Extension.extension:key.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`key`
8. Extension.extension:key.value[x]
Control	1..?
Type	id
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
10. Extension.extension:requirements
Slice Name	requirements
Definition	An explanation of why this extension is required (for documentation purposes).
Short	Why needed
Control	0..1
Type	Extension
12. Extension.extension:requirements.extension
Control	0..0
14. Extension.extension:requirements.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`requirements`
16. Extension.extension:requirements.value[x]
Control	1..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
18. Extension.extension:severity
Slice Name	severity
Definition	Indicates how serious violating the invariant is.
Short	error\|warning
Control	1..1
Type	Extension
20. Extension.extension:severity.extension
Control	0..0
22. Extension.extension:severity.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`severity`
24. Extension.extension:severity.value[x]
Control	1..?
Binding	The codes SHALL be taken from ConstraintSeverity (required to `http://hl7.org/fhir/ValueSet/constraint-severity`) How important the invariant is.
Type	code
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
26. Extension.extension:expression
Slice Name	expression
Definition	The FHIRPath expression of the rule for computable interpretation.
Short	Formal rule
Control	1..1
Type	Extension
28. Extension.extension:expression.extension
Control	0..0
30. Extension.extension:expression.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`expression`
32. Extension.extension:expression.value[x]
Control	1..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
34. Extension.extension:human
Slice Name	human
Definition	A free text expression of the rule to display to the user if the rule is violated.
Short	Human-readable rule
Control	1..1
Type	Extension
36. Extension.extension:human.extension
Control	0..0
38. Extension.extension:human.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`human`
40. Extension.extension:human.value[x]
Control	1..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
42. Extension.extension:location
Slice Name	location
Definition	Relative paths to the questions this rule is enforced against.
Short	Relative path to elements
Control	0..*
Type	Extension
44. Extension.extension:location.extension
Control	0..0
46. Extension.extension:location.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`location`
48. Extension.extension:location.value[x]
Control	1..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
50. Extension.url
Fixed Value	`http://hl7.org/fhir/StructureDefinition/questionnaire-constraint`
52. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	An invariant that must be satisfied before responses to the questionnaire can be considered "complete". Optional Extension Element - found in all resources.
Short	ConstraintOptional Extensions Element
Comments	This maps to the ElementDefinition.constraint element. See additional guidance and examples in the SDC implementation guide.
Control	0..*
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	Changed:40..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:key
Slice Name	key
Definition	Unique id for the constraint within the questionnaire.
Short	Unique identifierAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Extension.extension:key.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
8. Extension.extension:key.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`key`
10. Extension.extension:key.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	id, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Extension.extension:requirements
Slice Name	requirements
Definition	An explanation of why this extension is required (for documentation purposes).
Short	Why neededAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Extension.extension:requirements.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
16. Extension.extension:requirements.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`requirements`
18. Extension.extension:requirements.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Extension.extension:severity
Slice Name	severity
Definition	Indicates how serious violating the invariant is.
Short	error\|warningAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Extension.extension:severity.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
24. Extension.extension:severity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`severity`
26. Extension.extension:severity.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from For codes, see ConstraintSeverity (required to `http://hl7.org/fhir/ValueSet/constraint-severity`) How important the invariant is.
Type	code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Extension.extension:expression
Slice Name	expression
Definition	The FHIRPath expression of the rule for computable interpretation.
Short	Formal ruleAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Extension.extension:expression.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:expression.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`expression`
34. Extension.extension:expression.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Extension.extension:human
Slice Name	human
Definition	A free text expression of the rule to display to the user if the rule is violated.
Short	Human-readable ruleAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Extension.extension:human.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
40. Extension.extension:human.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`human`
42. Extension.extension:human.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Extension.extension:location
Slice Name	location
Definition	Relative paths to the questions this rule is enforced against.
Short	Relative path to elementsAdditional content defined by implementations
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Extension.extension:location.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
48. Extension.extension:location.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`location`
50. Extension.extension:location.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/questionnaire-constraint`
54. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	An invariant that must be satisfied before responses to the questionnaire can be considered "complete".
Short	Constraint
Comments	This maps to the ElementDefinition.constraint element. See additional guidance and examples in the SDC implementation guide.
Control	0..*
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	Changed:4..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:key
Slice Name	key
Definition	Unique id for the constraint within the questionnaire.
Short	Unique identifier
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:key.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:key.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:key.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`key`
14. Extension.extension:key.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	id
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:requirements
Slice Name	requirements
Definition	An explanation of why this extension is required (for documentation purposes).
Short	Why needed
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:requirements.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:requirements.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:requirements.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`requirements`
24. Extension.extension:requirements.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:severity
Slice Name	severity
Definition	Indicates how serious violating the invariant is.
Short	error\|warning
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:severity.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
30. Extension.extension:severity.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:severity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`severity`
34. Extension.extension:severity.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from ConstraintSeverity (required to `http://hl7.org/fhir/ValueSet/constraint-severity`) How important the invariant is.
Type	code
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.extension:expression
Slice Name	expression
Definition	The FHIRPath expression of the rule for computable interpretation.
Short	Formal rule
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Extension.extension:expression.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
40. Extension.extension:expression.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:expression.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`expression`
44. Extension.extension:expression.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:human
Slice Name	human
Definition	A free text expression of the rule to display to the user if the rule is violated.
Short	Human-readable rule
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:human.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:human.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:human.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`human`
54. Extension.extension:human.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
56. Extension.extension:location
Slice Name	location
Definition	Relative paths to the questions this rule is enforced against.
Short	Relative path to elements
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
58. Extension.extension:location.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
60. Extension.extension:location.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
62. Extension.extension:location.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`location`
64. Extension.extension:location.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
66. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/questionnaire-constraint`
68. Extension.value[x]
Definition	Changed: Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)