HL7.FHIR.UV.EXTENSIONS\Artifact Assessment Content - Definitions

This page is part of the FHIR Core Extensions Registry (v5.1.0: Release 5.1) based on FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Extension: ArtifactAssessmentContent - Detailed Descriptions

Page standards status: Draft

Maturity Level: 1

Definitions for the artifactassessment-content extension.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	Content containing A component comment, classifier, or rating of the artifact.
Short	Comment, classifier, or rating content
Control	0..*
2. Extension.extension:informationType
Slice Name	informationType
Definition	The type of information this component of the content represents.
Short	comment \| classifier \| rating \| container \| response \| change-request
Control	0..1
Type	Extension
4. Extension.extension:informationType.url
Fixed Value	`informationType`
6. Extension.extension:informationType.value[x]
Binding	The codes SHALL be taken from ArtifactAssessmentInformationType (required to `http://hl7.org/fhir/ValueSet/artifactassessment-information-type`) The type of information contained in a component of an artifact assessment.
Type	code
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
8. Extension.extension:summary
Slice Name	summary
Definition	A brief summary of the content of this component..
Short	Brief summary of the content
Control	0..1
Type	Extension
10. Extension.extension:summary.url
Fixed Value	`summary`
12. Extension.extension:summary.value[x]
Type	markdown
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
14. Extension.extension:type
Slice Name	type
Definition	Indicates what type of content this component represents.
Short	Indicates what type of content this component represents
Control	0..1
Type	Extension
16. Extension.extension:type.url
Fixed Value	`type`
18. Extension.extension:type.value[x]
Binding	For example codes, see EvidenceCertaintyType (example to `http://hl7.org/fhir/ValueSet/certainty-type`)
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
20. Extension.extension:classifier
Slice Name	classifier
Definition	Represents a rating, classifier, or assessment of the artifact.
Short	Rating, classifier, or assessment
Control	0..*
Type	Extension
22. Extension.extension:classifier.url
Fixed Value	`classifier`
24. Extension.extension:classifier.value[x]
Binding	For example codes, see EvidenceCertaintyRating (example to `http://hl7.org/fhir/ValueSet/certainty-rating`)
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
26. Extension.extension:quantity
Slice Name	quantity
Definition	A quantitative rating of the artifact.
Short	Quantitative rating
Control	0..1
Type	Extension
28. Extension.extension:quantity.url
Fixed Value	`quantity`
30. Extension.extension:quantity.value[x]
Type	Quantity
[x] Note	See Choice of Data Types for further information about how to use [x]
32. Extension.extension:author
Slice Name	author
Definition	Indicates who or what authored the content.
Short	Who authored the content
Control	0..1
Type	Extension
34. Extension.extension:author.url
Fixed Value	`author`
36. Extension.extension:author.value[x]
Type	Reference(Patient, Practitioner, PractitionerRole, Organization, Device)
[x] Note	See Choice of Data Types for further information about how to use [x]
38. Extension.extension:path
Slice Name	path
Definition	A URI that points to what the comment is about, such as a line of text in the CQL, or a specific element in a resource.
Short	What the comment is directed to
Control	0..*
Type	Extension
40. Extension.extension:path.url
Fixed Value	`path`
42. Extension.extension:path.value[x]
Type	uri
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
44. Extension.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	Additional related artifacts that provide supporting documentation, additional evidence, or further information related to the content.
Short	Additional information
Control	0..*
Type	Extension
46. Extension.extension:relatedArtifact.url
Fixed Value	`relatedArtifact`
48. Extension.extension:relatedArtifact.value[x]
Type	RelatedArtifact
[x] Note	See Choice of Data Types for further information about how to use [x]
50. Extension.extension:freeToShare
Slice Name	freeToShare
Definition	Acceptable to publicly share the comment, classifier or rating.
Short	Acceptable to publicly share the resource content
Control	0..1
Type	Extension
52. Extension.extension:freeToShare.url
Fixed Value	`freeToShare`
54. Extension.extension:freeToShare.value[x]
Type	boolean
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
56. Extension.extension:component
Slice Name	component
Definition	If the informationType is container, the components of the content.
Short	Contained content
Control	0..*
Type	Extension
58. Extension.extension:component.url
Fixed Value	`component`
60. Extension.extension:component.value[x]
Type	See ttp://hl7.org/fhir/StructureDefinition/Extension#Extension.extension
[x] Note	See Choice of Data Types for further information about how to use [x]
62. Extension.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`http://hl7.org/fhir/StructureDefinition/artifactassessment-content`

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	Content containing A component comment, classifier, or rating of the artifact. Optional Extension Element - found in all resources.
Short	Comment, classifier, or rating contentOptional Extensions Element
Control	0..*
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension:informationType
Slice Name	informationType
Definition	The type of information this component of the content represents.
Short	comment \| classifier \| rating \| container \| response \| change-requestAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
4. Extension.extension:informationType.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`informationType`
6. Extension.extension:informationType.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from For codes, see ArtifactAssessmentInformationType (required to `http://hl7.org/fhir/ValueSet/artifactassessment-information-type`) The type of information contained in a component of an artifact assessment.
Type	code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Extension.extension:summary
Slice Name	summary
Definition	A brief summary of the content of this component..
Short	Brief summary of the contentAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Extension.extension:summary.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`summary`
12. Extension.extension:summary.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	markdown, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Extension.extension:type
Slice Name	type
Definition	Indicates what type of content this component represents.
Short	Indicates what type of content this component representsAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
18. Extension.extension:type.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see For codes, see EvidenceCertaintyType (example to `http://hl7.org/fhir/ValueSet/certainty-type`)
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Extension.extension:classifier
Slice Name	classifier
Definition	Represents a rating, classifier, or assessment of the artifact.
Short	Rating, classifier, or assessmentAdditional content defined by implementations
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Extension.extension:classifier.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`classifier`
24. Extension.extension:classifier.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see For codes, see EvidenceCertaintyRating (example to `http://hl7.org/fhir/ValueSet/certainty-rating`)
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.extension:quantity
Slice Name	quantity
Definition	A quantitative rating of the artifact.
Short	Quantitative ratingAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Extension.extension:quantity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`quantity`
30. Extension.extension:quantity.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Extension.extension:author
Slice Name	author
Definition	Indicates who or what authored the content.
Short	Who authored the contentAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Extension.extension:author.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`author`
36. Extension.extension:author.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Patient, Practitioner, PractitionerRole, Organization, Device), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Extension.extension:path
Slice Name	path
Definition	A URI that points to what the comment is about, such as a line of text in the CQL, or a specific element in a resource.
Short	What the comment is directed toAdditional content defined by implementations
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Extension.extension:path.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`path`
42. Extension.extension:path.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	uri, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Extension.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	Additional related artifacts that provide supporting documentation, additional evidence, or further information related to the content.
Short	Additional informationAdditional content defined by implementations
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Extension.extension:relatedArtifact.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`relatedArtifact`
48. Extension.extension:relatedArtifact.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	RelatedArtifact, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Extension.extension:freeToShare
Slice Name	freeToShare
Definition	Acceptable to publicly share the comment, classifier or rating.
Short	Acceptable to publicly share the resource contentAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. Extension.extension:freeToShare.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`freeToShare`
54. Extension.extension:freeToShare.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Extension.extension:component
Slice Name	component
Definition	If the informationType is container, the components of the content.
Short	Contained contentAdditional content defined by implementations
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. Extension.extension:component.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`component`
60. Extension.extension:component.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/artifactassessment-content`

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	Content containing A component comment, classifier, or rating of the artifact.
Short	Comment, classifier, or rating content
Control	0..*
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:informationType
Slice Name	informationType
Definition	The type of information this component of the content represents.
Short	comment \| classifier \| rating \| container \| response \| change-request
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:informationType.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:informationType.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:informationType.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`informationType`
14. Extension.extension:informationType.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from ArtifactAssessmentInformationType (required to `http://hl7.org/fhir/ValueSet/artifactassessment-information-type`) The type of information contained in a component of an artifact assessment.
Type	code
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:summary
Slice Name	summary
Definition	A brief summary of the content of this component..
Short	Brief summary of the content
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:summary.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:summary.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:summary.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`summary`
24. Extension.extension:summary.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	markdown
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:type
Slice Name	type
Definition	Indicates what type of content this component represents.
Short	Indicates what type of content this component represents
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
30. Extension.extension:type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
34. Extension.extension:type.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see EvidenceCertaintyType (example to `http://hl7.org/fhir/ValueSet/certainty-type`)
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.extension:classifier
Slice Name	classifier
Definition	Represents a rating, classifier, or assessment of the artifact.
Short	Rating, classifier, or assessment
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Extension.extension:classifier.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
40. Extension.extension:classifier.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:classifier.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`classifier`
44. Extension.extension:classifier.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see EvidenceCertaintyRating (example to `http://hl7.org/fhir/ValueSet/certainty-rating`)
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:quantity
Slice Name	quantity
Definition	A quantitative rating of the artifact.
Short	Quantitative rating
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:quantity.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:quantity.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:quantity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`quantity`
54. Extension.extension:quantity.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Quantity
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
56. Extension.extension:author
Slice Name	author
Definition	Indicates who or what authored the content.
Short	Who authored the content
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
58. Extension.extension:author.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
60. Extension.extension:author.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
62. Extension.extension:author.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`author`
64. Extension.extension:author.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Reference(Patient, Practitioner, PractitionerRole, Organization, Device)
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
66. Extension.extension:path
Slice Name	path
Definition	A URI that points to what the comment is about, such as a line of text in the CQL, or a specific element in a resource.
Short	What the comment is directed to
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
68. Extension.extension:path.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
70. Extension.extension:path.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
72. Extension.extension:path.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`path`
74. Extension.extension:path.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	uri
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
76. Extension.extension:relatedArtifact
Slice Name	relatedArtifact
Definition	Additional related artifacts that provide supporting documentation, additional evidence, or further information related to the content.
Short	Additional information
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
78. Extension.extension:relatedArtifact.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
80. Extension.extension:relatedArtifact.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
82. Extension.extension:relatedArtifact.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`relatedArtifact`
84. Extension.extension:relatedArtifact.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	RelatedArtifact
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
86. Extension.extension:freeToShare
Slice Name	freeToShare
Definition	Acceptable to publicly share the comment, classifier or rating.
Short	Acceptable to publicly share the resource content
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
88. Extension.extension:freeToShare.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
90. Extension.extension:freeToShare.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
92. Extension.extension:freeToShare.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`freeToShare`
94. Extension.extension:freeToShare.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	boolean
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
96. Extension.extension:component
Slice Name	component
Definition	If the informationType is container, the components of the content.
Short	Contained content
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
98. Extension.extension:component.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
100. Extension.extension:component.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
102. Extension.extension:component.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`component`
104. Extension.extension:component.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
106. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/artifactassessment-content`
108. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)