HL7.FHIR.UV.EXTENSIONS\Dosage - Minimum Gap Between Doses - Definitions

This page is part of the FHIR Core Extensions Registry (v5.1.0-snapshot1: Release 5.1) based on FHIR (HL7® FHIR® Standard) v5.0.0. The current version which supersedes this version is 1.0.0. For a full list of available versions, see the Directory of published versions

Extension: DosageMinimumGapBetweenDose - Detailed Descriptions

Page standards status: Draft

Maturity Level: 1

Definitions for the dosage-minimumGapBetweenDose extension.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	The minimum amount of time that must pass between administering the specified dose amount.
Short	Time that must pass between doses
Comments	Used on orders with flexible timing, such as PRN medications or PCA devices when there is a need to prevent too much medication from being administered in too short a period of time.
Control	0..1
Alternate Names	lockout interval
2. Extension.extension:meetGoal
Slice Name	meetGoal
Definition	Follow the dosage instructions until the specified goal is met.
Control	0..*
Type	Extension
4. Extension.extension:meetGoal.extension
Control	Added:1..?
6. Extension.extension:meetGoal.extension:offset
Slice Name	offset
Definition	Specifies the offset before or after the goal is met to follow the instructions.
Control	0..1
Type	Extension
8. Extension.extension:meetGoal.extension:offset.extension
Control	0..0
10. Extension.extension:meetGoal.extension:offset.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`offset`
12. Extension.extension:meetGoal.extension:offset.value[x]
Control	1..?
Type	Duration
[x] Note	See Choice of Data Types for further information about how to use [x]
14. Extension.extension:meetGoal.extension:goal
Slice Name	goal
Definition	The specific goal to meet to follow the dosage instructions.
Control	1..1
Type	Extension
16. Extension.extension:meetGoal.extension:goal.extension
Control	0..0
18. Extension.extension:meetGoal.extension:goal.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`goal`
20. Extension.extension:meetGoal.extension:goal.value[x]
Control	1..?
Type	Choice of: string, Reference(Goal)
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
22. Extension.extension:meetGoal.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`meetGoal`
24. Extension.extension:meetGoal.value[x]
Control	0..0
26. Extension.extension:whenTrigger
Slice Name	whenTrigger
Definition	A condition that causes the dosage instructions to be followed.
Control	0..*
Type	Extension
28. Extension.extension:whenTrigger.extension
Control	Added:1..?
30. Extension.extension:whenTrigger.extension:offset
Slice Name	offset
Definition	Specifies the offset before or after the trigger happens to follow the instructions.
Control	0..1
Type	Extension
32. Extension.extension:whenTrigger.extension:offset.extension
Control	0..0
34. Extension.extension:whenTrigger.extension:offset.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`offset`
36. Extension.extension:whenTrigger.extension:offset.value[x]
Control	1..?
Type	Duration
[x] Note	See Choice of Data Types for further information about how to use [x]
38. Extension.extension:whenTrigger.extension:trigger
Slice Name	trigger
Definition	The event that causes the dosage instruction to be followed.
Control	1..1
Type	Extension
40. Extension.extension:whenTrigger.extension:trigger.extension
Control	0..0
42. Extension.extension:whenTrigger.extension:trigger.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`trigger`
44. Extension.extension:whenTrigger.extension:trigger.value[x]
Control	1..?
Type	Choice of: string, Reference(Procedure, ActivityDefinition, ObservationDefinition)
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
46. Extension.extension:whenTrigger.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`whenTrigger`
48. Extension.extension:whenTrigger.value[x]
Control	0..0
50. Extension.extension:precondition
Slice Name	precondition
Definition	A condition that must (or must not) be present for the dosage instructions to be followed.
Control	0..*
Type	Extension
52. Extension.extension:precondition.extension
Control	Added:1..?
54. Extension.extension:precondition.extension:doesNotOccur
Slice Name	doesNotOccur
Definition	If set to 'true', indicates that the condition must not be present for the dosage instructions to be followed.
Control	0..1
Type	Extension
56. Extension.extension:precondition.extension:doesNotOccur.extension
Control	0..0
58. Extension.extension:precondition.extension:doesNotOccur.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`doesNotOccur`
60. Extension.extension:precondition.extension:doesNotOccur.value[x]
Control	1..?
Type	boolean
[x] Note	See Choice of Data Types for further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
62. Extension.extension:precondition.extension:condition
Slice Name	condition
Definition	The event that causes the dosage instruction to be followed.
Control	1..1
Type	Extension
64. Extension.extension:precondition.extension:condition.extension
Control	0..0
66. Extension.extension:precondition.extension:condition.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`condition`
68. Extension.extension:precondition.extension:condition.value[x]
Control	1..?
Type	Reference(ActivityDefinition, ObservationDefinition)
[x] Note	See Choice of Data Types for further information about how to use [x]
70. Extension.extension:precondition.url
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`precondition`
72. Extension.extension:precondition.value[x]
Control	0..0
74. Extension.url
Fixed Value	`http://hl7.org/fhir/StructureDefinition/dosage-minimumGapBetweenDose`
76. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	The minimum amount of time that must pass between administering the specified dose amount. Optional Extension Element - found in all resources.
Short	Time that must pass between dosesOptional Extensions Element
Comments	Used on orders with flexible timing, such as PRN medications or PCA devices when there is a need to prevent too much medication from being administered in too short a period of time.
Control	0..1*
Is Modifier	false
Alternate Names	lockout interval
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension:meetGoal
Slice Name	meetGoal
Definition	Follow the dosage instructions until the specified goal is met.
Short	ExtensionAdditional content defined by implementations
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
4. Extension.extension:meetGoal.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:meetGoal.extension:offset
Slice Name	offset
Definition	Specifies the offset before or after the goal is met to follow the instructions.
Short	ExtensionAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Extension.extension:meetGoal.extension:offset.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
10. Extension.extension:meetGoal.extension:offset.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`offset`
12. Extension.extension:meetGoal.extension:offset.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	Duration, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Extension.extension:meetGoal.extension:goal
Slice Name	goal
Definition	The specific goal to meet to follow the dosage instructions.
Short	ExtensionAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Extension.extension:meetGoal.extension:goal.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
18. Extension.extension:meetGoal.extension:goal.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`goal`
20. Extension.extension:meetGoal.extension:goal.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	Choice of: string, Reference(Goal), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Extension.extension:meetGoal.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`meetGoal`
24. Extension.extension:meetGoal.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.extension:whenTrigger
Slice Name	whenTrigger
Definition	A condition that causes the dosage instructions to be followed.
Short	ExtensionAdditional content defined by implementations
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Extension.extension:whenTrigger.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
30. Extension.extension:whenTrigger.extension:offset
Slice Name	offset
Definition	Specifies the offset before or after the trigger happens to follow the instructions.
Short	ExtensionAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Extension.extension:whenTrigger.extension:offset.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
34. Extension.extension:whenTrigger.extension:offset.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`offset`
36. Extension.extension:whenTrigger.extension:offset.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	Duration, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Extension.extension:whenTrigger.extension:trigger
Slice Name	trigger
Definition	The event that causes the dosage instruction to be followed.
Short	ExtensionAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Extension.extension:whenTrigger.extension:trigger.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:whenTrigger.extension:trigger.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`trigger`
44. Extension.extension:whenTrigger.extension:trigger.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	Choice of: string, Reference(Procedure, ActivityDefinition, ObservationDefinition), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Extension.extension:whenTrigger.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`whenTrigger`
48. Extension.extension:whenTrigger.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Extension.extension:precondition
Slice Name	precondition
Definition	A condition that must (or must not) be present for the dosage instructions to be followed.
Short	ExtensionAdditional content defined by implementations
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. Extension.extension:precondition.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
54. Extension.extension:precondition.extension:doesNotOccur
Slice Name	doesNotOccur
Definition	If set to 'true', indicates that the condition must not be present for the dosage instructions to be followed.
Short	ExtensionAdditional content defined by implementations
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
56. Extension.extension:precondition.extension:doesNotOccur.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
58. Extension.extension:precondition.extension:doesNotOccur.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`doesNotOccur`
60. Extension.extension:precondition.extension:doesNotOccur.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Extension.extension:precondition.extension:condition
Slice Name	condition
Definition	The event that causes the dosage instruction to be followed.
Short	ExtensionAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Extension.extension:precondition.extension:condition.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
66. Extension.extension:precondition.extension:condition.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`condition`
68. Extension.extension:precondition.extension:condition.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	10..1 This element is affected by the following invariants: ext-1
Type	Reference(ActivityDefinition, ObservationDefinition), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Extension.extension:precondition.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`precondition`
72. Extension.extension:precondition.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/dosage-minimumGapBetweenDose`
76. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition	The minimum amount of time that must pass between administering the specified dose amount.
Short	Time that must pass between doses
Comments	Used on orders with flexible timing, such as PRN medications or PCA devices when there is a need to prevent too much medication from being administered in too short a period of time.
Control	0..1
Is Modifier	false
Alternate Names	lockout interval
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:meetGoal
Slice Name	meetGoal
Definition	Follow the dosage instructions until the specified goal is met.
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:meetGoal.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:meetGoal.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:meetGoal.extension:offset
Slice Name	offset
Definition	Specifies the offset before or after the goal is met to follow the instructions.
Short	Extension
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
14. Extension.extension:meetGoal.extension:offset.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
16. Extension.extension:meetGoal.extension:offset.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
18. Extension.extension:meetGoal.extension:offset.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`offset`
20. Extension.extension:meetGoal.extension:offset.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	Duration
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
22. Extension.extension:meetGoal.extension:goal
Slice Name	goal
Definition	The specific goal to meet to follow the dosage instructions.
Short	Extension
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
24. Extension.extension:meetGoal.extension:goal.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
26. Extension.extension:meetGoal.extension:goal.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
28. Extension.extension:meetGoal.extension:goal.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`goal`
30. Extension.extension:meetGoal.extension:goal.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	Choice of: string, Reference(Goal)
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
32. Extension.extension:meetGoal.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`meetGoal`
34. Extension.extension:meetGoal.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.extension:whenTrigger
Slice Name	whenTrigger
Definition	A condition that causes the dosage instructions to be followed.
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Extension.extension:whenTrigger.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
40. Extension.extension:whenTrigger.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:whenTrigger.extension:offset
Slice Name	offset
Definition	Specifies the offset before or after the trigger happens to follow the instructions.
Short	Extension
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
44. Extension.extension:whenTrigger.extension:offset.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
46. Extension.extension:whenTrigger.extension:offset.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
48. Extension.extension:whenTrigger.extension:offset.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`offset`
50. Extension.extension:whenTrigger.extension:offset.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	Duration
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
52. Extension.extension:whenTrigger.extension:trigger
Slice Name	trigger
Definition	The event that causes the dosage instruction to be followed.
Short	Extension
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
54. Extension.extension:whenTrigger.extension:trigger.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
56. Extension.extension:whenTrigger.extension:trigger.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
58. Extension.extension:whenTrigger.extension:trigger.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`trigger`
60. Extension.extension:whenTrigger.extension:trigger.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	Choice of: string, Reference(Procedure, ActivityDefinition, ObservationDefinition)
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
62. Extension.extension:whenTrigger.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`whenTrigger`
64. Extension.extension:whenTrigger.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
66. Extension.extension:precondition
Slice Name	precondition
Definition	A condition that must (or must not) be present for the dosage instructions to be followed.
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
68. Extension.extension:precondition.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
70. Extension.extension:precondition.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
72. Extension.extension:precondition.extension:doesNotOccur
Slice Name	doesNotOccur
Definition	If set to 'true', indicates that the condition must not be present for the dosage instructions to be followed.
Short	Extension
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
74. Extension.extension:precondition.extension:doesNotOccur.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
76. Extension.extension:precondition.extension:doesNotOccur.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
78. Extension.extension:precondition.extension:doesNotOccur.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`doesNotOccur`
80. Extension.extension:precondition.extension:doesNotOccur.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	boolean
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
82. Extension.extension:precondition.extension:condition
Slice Name	condition
Definition	The event that causes the dosage instruction to be followed.
Short	Extension
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
84. Extension.extension:precondition.extension:condition.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
86. Extension.extension:precondition.extension:condition.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
88. Extension.extension:precondition.extension:condition.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`condition`
90. Extension.extension:precondition.extension:condition.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	1..1 This element is affected by the following invariants: ext-1
Type	Reference(ActivityDefinition, ObservationDefinition)
[x] Note	See Choice of Data Types for further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
92. Extension.extension:precondition.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`precondition`
94. Extension.extension:precondition.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
96. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/dosage-minimumGapBetweenDose`
98. Extension.value[x]
Definition	Changed: Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)