HL7.FHIR.UV.EXTENSIONS\Person Recorded Sex Or Gender - Definitions

This page is part of the FHIR Core Extensions Registry (v0.1.0: Releases Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions

Extension: RecordedSexOrGender - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 1

Definitions for the individual-recordedSexOrGender extension.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here.

1. Extension
Definition	A sex or gender property for the individual from a document or other record Optional Extension Element - found in all resources.
2. Extension.extension:value
SliceName	value
Definition	A sex or gender property for the individual from a document or other record
Control	1..1
Type	Extension
3. Extension.extension:value.extension
Control	0..0
4. Extension.extension:value.url
Control	0..?
Type	uri
Fixed Value	value
5. Extension.extension:value.value[x]
Control	1..?
Binding	For example codes, see AdministrativeGender
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
6. Extension.extension:internationalEquivalent
SliceName	internationalEquivalent
Definition	An international representation of the value found on the document for interoperability and international legal purposes.
Control	0..1
Type	Extension
7. Extension.extension:internationalEquivalent.extension
Control	0..0
8. Extension.extension:internationalEquivalent.url
Control	0..?
Type	uri
Fixed Value	internationalEquivalent
9. Extension.extension:internationalEquivalent.value[x]
Control	1..?
Binding	The codes SHALL be taken from http://terminology.hl7.org/ValueSet/international-civil-aviation-organization-sex-or-gender; other codes may be used where these codes are not suitable
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
10. Extension.extension:type
SliceName	type
Definition	The type or category of sex or gender that is recorded.
Control	0..1
Type	Extension
Comments	Because the recorded sex and gender concept exists primarily as means to exchange sex and gender data concepts that are either use-case specific or that are historically not well defined, the type may either imply the indended use of the sex or gender value, or identify the sex or gender value as based on historical semanitcs.
11. Extension.extension:type.extension
Control	0..0
12. Extension.extension:type.url
Control	0..?
Type	uri
Fixed Value	type
13. Extension.extension:type.value[x]
Control	1..?
Binding	The codes SHOULD be taken from Recorded Sex Or Gender Type
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
14. Extension.extension:effectivePeriod
SliceName	effectivePeriod
Definition	The time period during which the recorded sex or gender value applies to the individual
Control	0..1
Type	Extension
15. Extension.extension:effectivePeriod.extension
Control	0..0
16. Extension.extension:effectivePeriod.url
Control	0..?
Type	uri
Fixed Value	effectivePeriod
17. Extension.extension:effectivePeriod.value[x]
Control	0..1
Type	Period
[x] Note	See Choice of Data Types for further information about how to use [x]
18. Extension.extension:acquisitionDate
SliceName	acquisitionDate
Definition	The date/time when the sex or gender value was first recorded in the system.
Control	0..1
Type	Extension
19. Extension.extension:acquisitionDate.extension
Control	0..0
20. Extension.extension:acquisitionDate.url
Control	0..?
Type	uri
Fixed Value	acquisitionDate
21. Extension.extension:acquisitionDate.value[x]
Control	1..?
Type	dateTime
[x] Note	See Choice of Data Types for further information about how to use [x]
22. Extension.extension:sourceDocument
SliceName	sourceDocument
Definition	The reference to the source document or the code representing the type of document where this sex or gender property is initially recorded.
Control	0..1
Type	Extension
Comments	For example, if a driver's license is scanned, this property may reference that scanned document.
23. Extension.extension:sourceDocument.extension
Control	0..0
24. Extension.extension:sourceDocument.url
Control	0..?
Type	uri
Fixed Value	sourceDocument
25. Extension.extension:sourceDocument.value[x]
Control	1..?
Type	CodeableReference(DocumentReference)
[x] Note	See Choice of Data Types for further information about how to use [x]
26. Extension.extension:sourceField
SliceName	sourceField
Definition	The name of the field within the source document where this sex or gender property is initially recorded.
Control	0..1
Type	Extension
Comments	For example, if a sex value is acquired from a driver's license, and the name of the field on that driver's license is 'SEX', then a code describing that field can be provided. If the semantics of the field are known, they may be described in the comment. For example, if the 'SEX' field on a license in a particular state or province is populated based on an individual's indication of what gender they consider themselves to be, but the field label is 'SEX' for historical reasons, a comment describing that the semantics of the field align with gender identity, even though the field name is 'SEX' can be provided.
27. Extension.extension:sourceField.extension
Control	0..0
28. Extension.extension:sourceField.url
Control	0..?
Type	uri
Fixed Value	sourceField
29. Extension.extension:sourceField.value[x]
Control	1..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
30. Extension.extension:jurisdiction
SliceName	jurisdiction
Definition	The jurisdiction or organization that issued the document from which the sex or gender was aquired
Control	0..1
Type	Extension
Comments	For example, a individual's driver's license or passport would be issued by a specific state or country.
31. Extension.extension:jurisdiction.extension
Control	0..0
32. Extension.extension:jurisdiction.url
Control	0..?
Type	uri
Fixed Value	jurisdiction
33. Extension.extension:jurisdiction.value[x]
Control	1..?
Binding	The codes SHALL be taken from JurisdictionValueSet; other codes may be used where these codes are not suitable
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
34. Extension.extension:comment
SliceName	comment
Definition	Further explanation about the context or source of the recorded sex or gender value
Control	0..1
Type	Extension
35. Extension.extension:comment.extension
Control	0..0
36. Extension.extension:comment.url
Control	0..?
Type	uri
Fixed Value	comment
37. Extension.extension:comment.value[x]
Control	1..?
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
38. Extension.url
Fixed Value	http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender
39. Extension.value[x]
Control	0..01
[x] Note	See Choice of Data Types for further information about how to use [x]

Guidance on how to interpret the contents of this table can be found here.

1. Extension
Definition	A sex or gender property for the individual from a document or other record Optional Extension Element - found in all resources.
Control	0..*
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
2. Extension.extension:value
SliceName	value
Definition	A sex or gender property for the individual from a document or other record May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	10..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
3. Extension.extension:value.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:value.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	value
5. Extension.extension:value.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	10..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see AdministrativeGenderFor codes, see (unbound)
Type	Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Extension.extension:internationalEquivalent
SliceName	internationalEquivalent
Definition	An international representation of the value found on the document for interoperability and international legal purposes. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
7. Extension.extension:internationalEquivalent.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
8. Extension.extension:internationalEquivalent.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	internationalEquivalent
9. Extension.extension:internationalEquivalent.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	10..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from http://terminology.hl7.org/ValueSet/international-civil-aviation-organization-sex-or-gender; other codes may be used where these codes are not suitableFor codes, see (unbound)
Type	Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. Extension.extension:type
SliceName	type
Definition	The type or category of sex or gender that is recorded. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	Because the recorded sex and gender concept exists primarily as means to exchange sex and gender data concepts that are either use-case specific or that are historically not well defined, the type may either imply the indended use of the sex or gender value, or identify the sex or gender value as based on historical semanitcs. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
11. Extension.extension:type.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	type
13. Extension.extension:type.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	10..1 This element is affected by the following invariants: ext-1
Binding	The codes SHOULD be taken from Recorded Sex Or Gender TypeFor codes, see (unbound)
Type	Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. Extension.extension:effectivePeriod
SliceName	effectivePeriod
Definition	The time period during which the recorded sex or gender value applies to the individual May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
15. Extension.extension:effectivePeriod.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
16. Extension.extension:effectivePeriod.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	effectivePeriod
17. Extension.extension:effectivePeriod.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1 This element is affected by the following invariants: ext-1
Type	Choice of: Period, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. Extension.extension:acquisitionDate
SliceName	acquisitionDate
Definition	The date/time when the sex or gender value was first recorded in the system. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
19. Extension.extension:acquisitionDate.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
20. Extension.extension:acquisitionDate.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	acquisitionDate
21. Extension.extension:acquisitionDate.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	10..1 This element is affected by the following invariants: ext-1
Type	Choice of: dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. Extension.extension:sourceDocument
SliceName	sourceDocument
Definition	The reference to the source document or the code representing the type of document where this sex or gender property is initially recorded. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	For example, if a driver's license is scanned, this property may reference that scanned document. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
23. Extension.extension:sourceDocument.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
24. Extension.extension:sourceDocument.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	sourceDocument
25. Extension.extension:sourceDocument.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	10..1 This element is affected by the following invariants: ext-1
Type	Choice of: CodeableReference(DocumentReference), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. Extension.extension:sourceField
SliceName	sourceField
Definition	The name of the field within the source document where this sex or gender property is initially recorded. May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	For example, if a sex value is acquired from a driver's license, and the name of the field on that driver's license is 'SEX', then a code describing that field can be provided. If the semantics of the field are known, they may be described in the comment. For example, if the 'SEX' field on a license in a particular state or province is populated based on an individual's indication of what gender they consider themselves to be, but the field label is 'SEX' for historical reasons, a comment describing that the semantics of the field align with gender identity, even though the field name is 'SEX' can be provided. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
27. Extension.extension:sourceField.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
28. Extension.extension:sourceField.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	sourceField
29. Extension.extension:sourceField.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	10..1 This element is affected by the following invariants: ext-1
Type	Choice of: string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. Extension.extension:jurisdiction
SliceName	jurisdiction
Definition	The jurisdiction or organization that issued the document from which the sex or gender was aquired May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	For example, a individual's driver's license or passport would be issued by a specific state or country. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
31. Extension.extension:jurisdiction.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:jurisdiction.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	jurisdiction
33. Extension.extension:jurisdiction.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	10..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from JurisdictionValueSet; other codes may be used where these codes are not suitableFor codes, see (unbound)
Type	Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. Extension.extension:comment
SliceName	comment
Definition	Further explanation about the context or source of the recorded sex or gender value May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..1*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
35. Extension.extension:comment.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..0*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
36. Extension.extension:comment.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	comment
37. Extension.extension:comment.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	10..1 This element is affected by the following invariants: ext-1
Type	Choice of: string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender
39. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..01 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. Extension
Definition	A sex or gender property for the individual from a document or other record
Control	0..*
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
3. Extension.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:value
SliceName	value
Definition	A sex or gender property for the individual from a document or other record
Control	1..1
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
5. Extension.extension:value.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
6. Extension.extension:value.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
7. Extension.extension:value.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	value
8. Extension.extension:value.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	1..1 This element is affected by the following invariants: ext-1
Binding	For example codes, see AdministrativeGender
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. Extension.extension:internationalEquivalent
SliceName	internationalEquivalent
Definition	An international representation of the value found on the document for interoperability and international legal purposes.
Control	0..1
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. Extension.extension:internationalEquivalent.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
11. Extension.extension:internationalEquivalent.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:internationalEquivalent.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	internationalEquivalent
13. Extension.extension:internationalEquivalent.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	1..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from http://terminology.hl7.org/ValueSet/international-civil-aviation-organization-sex-or-gender; other codes may be used where these codes are not suitable
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. Extension.extension:type
SliceName	type
Definition	The type or category of sex or gender that is recorded.
Control	0..1
Type	Extension
Summary	false
Comments	Because the recorded sex and gender concept exists primarily as means to exchange sex and gender data concepts that are either use-case specific or that are historically not well defined, the type may either imply the indended use of the sex or gender value, or identify the sex or gender value as based on historical semanitcs.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
15. Extension.extension:type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
16. Extension.extension:type.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
17. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	type
18. Extension.extension:type.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	1..1 This element is affected by the following invariants: ext-1
Binding	The codes SHOULD be taken from Recorded Sex Or Gender Type
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. Extension.extension:effectivePeriod
SliceName	effectivePeriod
Definition	The time period during which the recorded sex or gender value applies to the individual
Control	0..1
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
20. Extension.extension:effectivePeriod.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
21. Extension.extension:effectivePeriod.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:effectivePeriod.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	effectivePeriod
23. Extension.extension:effectivePeriod.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..1 This element is affected by the following invariants: ext-1
Type	Period
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. Extension.extension:acquisitionDate
SliceName	acquisitionDate
Definition	The date/time when the sex or gender value was first recorded in the system.
Control	0..1
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
25. Extension.extension:acquisitionDate.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
26. Extension.extension:acquisitionDate.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
27. Extension.extension:acquisitionDate.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	acquisitionDate
28. Extension.extension:acquisitionDate.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	1..1 This element is affected by the following invariants: ext-1
Type	dateTime
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. Extension.extension:sourceDocument
SliceName	sourceDocument
Definition	The reference to the source document or the code representing the type of document where this sex or gender property is initially recorded.
Control	0..1
Type	Extension
Summary	false
Comments	For example, if a driver's license is scanned, this property may reference that scanned document.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
30. Extension.extension:sourceDocument.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
31. Extension.extension:sourceDocument.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:sourceDocument.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	sourceDocument
33. Extension.extension:sourceDocument.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	1..1 This element is affected by the following invariants: ext-1
Type	CodeableReference(DocumentReference)
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. Extension.extension:sourceField
SliceName	sourceField
Definition	The name of the field within the source document where this sex or gender property is initially recorded.
Control	0..1
Type	Extension
Summary	false
Comments	For example, if a sex value is acquired from a driver's license, and the name of the field on that driver's license is 'SEX', then a code describing that field can be provided. If the semantics of the field are known, they may be described in the comment. For example, if the 'SEX' field on a license in a particular state or province is populated based on an individual's indication of what gender they consider themselves to be, but the field label is 'SEX' for historical reasons, a comment describing that the semantics of the field align with gender identity, even though the field name is 'SEX' can be provided.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
35. Extension.extension:sourceField.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
36. Extension.extension:sourceField.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
37. Extension.extension:sourceField.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	sourceField
38. Extension.extension:sourceField.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	1..1 This element is affected by the following invariants: ext-1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. Extension.extension:jurisdiction
SliceName	jurisdiction
Definition	The jurisdiction or organization that issued the document from which the sex or gender was aquired
Control	0..1
Type	Extension
Summary	false
Comments	For example, a individual's driver's license or passport would be issued by a specific state or country.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
40. Extension.extension:jurisdiction.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
41. Extension.extension:jurisdiction.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:jurisdiction.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	jurisdiction
43. Extension.extension:jurisdiction.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	1..1 This element is affected by the following invariants: ext-1
Binding	The codes SHALL be taken from JurisdictionValueSet; other codes may be used where these codes are not suitable
Type	CodeableConcept
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
44. Extension.extension:comment
SliceName	comment
Definition	Further explanation about the context or source of the recorded sex or gender value
Control	0..1
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
45. Extension.extension:comment.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1 This element is affected by the following invariants: ele-1
Type	id
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
46. Extension.extension:comment.extension
Definition	An Extension
Control	0..0
Type	Extension
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
47. Extension.extension:comment.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	comment
48. Extension.extension:comment.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	1..1 This element is affected by the following invariants: ext-1
Type	string
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Control	1..1
Type	uri
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Fixed Value	http://hl7.org/fhir/StructureDefinition/individual-recordedSexOrGender
50. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Control	0..0 This element is affected by the following invariants: ext-1
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta
[x] Note	See Choice of Data Types for further information about how to use [x]
Summary	false
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))