Release 4B

This page is part of the FHIR Specification (v4.3.0: R4B - STU). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions . Page versions: R5 R4B R4

Sampleddata.profile.ttl

Modeling and Methodology Work GroupMaturity Level: N/AStandards Status: Informative

Raw Turtle (+ also see Turtle/RDF Format Specification)

StructureDefinition for SampledData

@prefix fhir: <http://hl7.org/fhir/> .
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#> .

# - resource -------------------------------------------------------------------

[] a fhir:StructureDefinition;
  fhir:Resource.id [ fhir:value "SampledData"];
  fhir:DomainResource.text [
     fhir:Narrative.status [ fhir:value "generated" ]
  ];
  fhir:DomainResource.extension [
     fhir:index 0;
     fhir:Extension.url [ fhir:value "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status" ];
     fhir:Extension.value [ fhir:value "trial-use" ]
  ];
  fhir:StructureDefinition.url [ fhir:value "http://hl7.org/fhir/StructureDefinition/SampledData"];
  fhir:StructureDefinition.version [ fhir:value "4.3.0"];
  fhir:StructureDefinition.name [ fhir:value "SampledData"];
  fhir:StructureDefinition.status [ fhir:value "draft"];
  fhir:StructureDefinition.experimental [ fhir:value "false"];
  fhir:StructureDefinition.date [ fhir:value "2022-05-28T12:47:40+10:00"];
  fhir:StructureDefinition.publisher [ fhir:value "HL7 FHIR Standard"];
  fhir:StructureDefinition.contact [
     fhir:index 0;
     fhir:ContactDetail.telecom [
       fhir:index 0;
       fhir:ContactPoint.system [ fhir:value "url" ];
       fhir:ContactPoint.value [ fhir:value "http://hl7.org/fhir" ]
     ]
  ];
  fhir:StructureDefinition.description [ fhir:value "Base StructureDefinition for SampledData Type: A series of measurements taken by a device, with upper and lower limits. There may be more than one dimension in the data."];
  fhir:StructureDefinition.purpose [ fhir:value "There is a need for a concise way to handle the data produced by devices that sample a physical state at a high frequency."];
  fhir:StructureDefinition.fhirVersion [ fhir:value "4.3.0"];
  fhir:StructureDefinition.mapping [
     fhir:index 0;
     fhir:StructureDefinition.identity [ fhir:value "v2" ];
     fhir:StructureDefinition.uri [ fhir:value "http://hl7.org/v2" ];
     fhir:StructureDefinition.name [ fhir:value "HL7 v2 Mapping" ]
  ], [
     fhir:index 1;
     fhir:StructureDefinition.identity [ fhir:value "rim" ];
     fhir:StructureDefinition.uri [ fhir:value "http://hl7.org/v3" ];
     fhir:StructureDefinition.name [ fhir:value "RIM Mapping" ]
  ];
  fhir:StructureDefinition.kind [ fhir:value "complex-type"];
  fhir:StructureDefinition.abstract [ fhir:value "false"];
  fhir:StructureDefinition.type [ fhir:value "SampledData"];
  fhir:StructureDefinition.baseDefinition [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element"];
  fhir:StructureDefinition.derivation [ fhir:value "specialization"];
  fhir:StructureDefinition.snapshot [
     fhir:StructureDefinition.element [
       fhir:index 0;
       fhir:Element.id [ fhir:value "SampledData" ];
       fhir:Element.extension [
         fhir:index 0;
         fhir:Extension.url [ fhir:value "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status" ];
         fhir:Extension.value [ fhir:value "trial-use" ]
       ];
       fhir:ElementDefinition.path [ fhir:value "SampledData" ];
       fhir:ElementDefinition.short [ fhir:value "A series of measurements taken by a device" ];
       fhir:ElementDefinition.definition [ fhir:value "A series of measurements taken by a device, with upper and lower limits. There may be more than one dimension in the data." ];
       fhir:ElementDefinition.comment [ fhir:value "The data is not interpretable without at least origin, period, and dimensions, but these are optional to allow a separation between the template of measurement and the actual measurement, such as between DeviceCapabilities and DeviceLog.  When providing a summary view (for example with Observation.value[x]) SampledData should be represented with a brief display text such as \"Sampled Data\"." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "*" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "SampledData" ];
         fhir:ElementDefinition.min [ fhir:value "0" ];
         fhir:ElementDefinition.max [ fhir:value "*" ]
       ];
       fhir:ElementDefinition.condition [
         fhir:value "ele-1";
         fhir:index 0
       ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children unless an empty Parameters resource" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count()) or $this is Parameters" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div|self::f:Parameters" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "n/a" ]
       ], [
         fhir:index 1;
         fhir:ElementDefinition.identity [ fhir:value "v2" ];
         fhir:ElementDefinition.map [ fhir:value "N/A (but see section 7.14 in v2.7)" ]
       ], [
         fhir:index 2;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "SLIST + GLIST" ]
       ]
     ], [
       fhir:index 1;
       fhir:Element.id [ fhir:value "SampledData.id" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.id" ];
       fhir:ElementDefinition.representation [
         fhir:value "xmlAttr";
         fhir:index 0
       ];
       fhir:ElementDefinition.short [ fhir:value "Unique id for inter-element referencing" ];
       fhir:ElementDefinition.definition [ fhir:value "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "Element.id" ];
         fhir:ElementDefinition.min [ fhir:value "0" ];
         fhir:ElementDefinition.max [ fhir:value "1" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:Element.extension [
           fhir:index 0;
           fhir:Extension.url [ fhir:value "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type" ];
           fhir:Extension.value [ fhir:value "id" ]
         ];
         fhir:ElementDefinition.code [ fhir:value "http://hl7.org/fhirpath/System.String" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "false" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "n/a" ]
       ]
     ], [
       fhir:index 2;
       fhir:Element.id [ fhir:value "SampledData.extension" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.extension" ];
       fhir:ElementDefinition.slicing [
         fhir:ElementDefinition.discriminator [
           fhir:index 0;
           fhir:ElementDefinition.type [ fhir:value "value" ];
           fhir:ElementDefinition.path [ fhir:value "url" ]
         ];
         fhir:ElementDefinition.description [ fhir:value "Extensions are always sliced by (at least) url" ];
         fhir:ElementDefinition.rules [ fhir:value "open" ]
       ];
       fhir:ElementDefinition.short [ fhir:value "Additional content defined by implementations" ];
       fhir:ElementDefinition.definition [ fhir:value "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension." ];
       fhir:ElementDefinition.comment [ fhir:value "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone." ];
       fhir:ElementDefinition.alias [
         fhir:value "extensions";
         fhir:index 0
       ], [
         fhir:value "user content";
         fhir:index 1
       ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "*" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "Element.extension" ];
         fhir:ElementDefinition.min [ fhir:value "0" ];
         fhir:ElementDefinition.max [ fhir:value "*" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "Extension" ]
       ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count())" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ], [
         fhir:index 1;
         fhir:ElementDefinition.key [ fhir:value "ext-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "Must have either extensions or value[x], not both" ];
         fhir:ElementDefinition.expression [ fhir:value "extension.exists() != value.exists()" ];
         fhir:ElementDefinition.xpath [ fhir:value "exists(f:extension)!=exists(f:*[starts-with(local-name(.), \"value\")])" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Extension" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "false" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "n/a" ]
       ]
     ], [
       fhir:index 3;
       fhir:Element.id [ fhir:value "SampledData.origin" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.origin" ];
       fhir:ElementDefinition.short [ fhir:value "Zero value and units" ];
       fhir:ElementDefinition.definition [ fhir:value "The base quantity that a measured value of zero represents. In addition, this provides the units of the entire measurement series." ];
       fhir:ElementDefinition.min [ fhir:value "1" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "SampledData.origin" ];
         fhir:ElementDefinition.min [ fhir:value "1" ];
         fhir:ElementDefinition.max [ fhir:value "1" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "Quantity" ];
         fhir:ElementDefinition.profile [
           fhir:value "http://hl7.org/fhir/StructureDefinition/SimpleQuantity";
           fhir:index 0
         ]
       ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count())" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "SLIST.origin" ]
       ]
     ], [
       fhir:index 4;
       fhir:Element.id [ fhir:value "SampledData.period" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.period" ];
       fhir:ElementDefinition.short [ fhir:value "Number of milliseconds between samples" ];
       fhir:ElementDefinition.definition [ fhir:value "The length of time between sampling times, measured in milliseconds." ];
       fhir:ElementDefinition.comment [ fhir:value "This is usually a whole number." ];
       fhir:ElementDefinition.min [ fhir:value "1" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "SampledData.period" ];
         fhir:ElementDefinition.min [ fhir:value "1" ];
         fhir:ElementDefinition.max [ fhir:value "1" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "decimal" ]
       ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count())" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "GLIST.increment" ]
       ]
     ], [
       fhir:index 5;
       fhir:Element.id [ fhir:value "SampledData.factor" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.factor" ];
       fhir:ElementDefinition.short [ fhir:value "Multiply data by this before adding to origin" ];
       fhir:ElementDefinition.definition [ fhir:value "A correction factor that is applied to the sampled data points before they are added to the origin." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "SampledData.factor" ];
         fhir:ElementDefinition.min [ fhir:value "0" ];
         fhir:ElementDefinition.max [ fhir:value "1" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "decimal" ]
       ];
       fhir:ElementDefinition.meaningWhenMissing [ fhir:value "If no factor is assigned, the data is not adjusted before adding to the origin" ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count())" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "SLIST.factor" ]
       ]
     ], [
       fhir:index 6;
       fhir:Element.id [ fhir:value "SampledData.lowerLimit" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.lowerLimit" ];
       fhir:ElementDefinition.short [ fhir:value "Lower limit of detection" ];
       fhir:ElementDefinition.definition [ fhir:value "The lower limit of detection of the measured points. This is needed if any of the data points have the value \"L\" (lower than detection limit)." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "SampledData.lowerLimit" ];
         fhir:ElementDefinition.min [ fhir:value "0" ];
         fhir:ElementDefinition.max [ fhir:value "1" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "decimal" ]
       ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count())" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "N/A (use SLIST.digits.nullFlavor)" ]
       ]
     ], [
       fhir:index 7;
       fhir:Element.id [ fhir:value "SampledData.upperLimit" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.upperLimit" ];
       fhir:ElementDefinition.short [ fhir:value "Upper limit of detection" ];
       fhir:ElementDefinition.definition [ fhir:value "The upper limit of detection of the measured points. This is needed if any of the data points have the value \"U\" (higher than detection limit)." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "SampledData.upperLimit" ];
         fhir:ElementDefinition.min [ fhir:value "0" ];
         fhir:ElementDefinition.max [ fhir:value "1" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "decimal" ]
       ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count())" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "N/A (use SLIST.digits.nullFlavor)" ]
       ]
     ], [
       fhir:index 8;
       fhir:Element.id [ fhir:value "SampledData.dimensions" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.dimensions" ];
       fhir:ElementDefinition.short [ fhir:value "Number of sample points at each time point" ];
       fhir:ElementDefinition.definition [ fhir:value "The number of sample points at each time point. If this value is greater than one, then the dimensions will be interlaced - all the sample points for a point in time will be recorded at once." ];
       fhir:ElementDefinition.comment [ fhir:value "If there is more than one dimension, the code for the type of data will define the meaning of the dimensions (typically ECG data)." ];
       fhir:ElementDefinition.min [ fhir:value "1" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "SampledData.dimensions" ];
         fhir:ElementDefinition.min [ fhir:value "1" ];
         fhir:ElementDefinition.max [ fhir:value "1" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "positiveInt" ]
       ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count())" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "N/A (fixed to 1)" ]
       ]
     ], [
       fhir:index 9;
       fhir:Element.id [ fhir:value "SampledData.data" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.data" ];
       fhir:ElementDefinition.short [ fhir:value "Decimal values with spaces, or \"E\" | \"U\" | \"L\"" ];
       fhir:ElementDefinition.definition [ fhir:value "A series of data points which are decimal values separated by a single space (character u20). The special values \"E\" (error), \"L\" (below detection limit) and \"U\" (above detection limit) can also be used in place of a decimal value." ];
       fhir:ElementDefinition.comment [ fhir:value "Data may be missing if it is omitted for summarization purposes. In general, data is required for any actual use of a SampledData." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.base [
         fhir:ElementDefinition.path [ fhir:value "SampledData.data" ];
         fhir:ElementDefinition.min [ fhir:value "0" ];
         fhir:ElementDefinition.max [ fhir:value "1" ]
       ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "string" ]
       ];
       fhir:ElementDefinition.constraint [
         fhir:index 0;
         fhir:ElementDefinition.key [ fhir:value "ele-1" ];
         fhir:ElementDefinition.severity [ fhir:value "error" ];
         fhir:ElementDefinition.human [ fhir:value "All FHIR elements must have a @value or children" ];
         fhir:ElementDefinition.expression [ fhir:value "hasValue() or (children().count() > id.count())" ];
         fhir:ElementDefinition.xpath [ fhir:value "@value|f:*|h:div" ];
         fhir:ElementDefinition.source [ fhir:value "http://hl7.org/fhir/StructureDefinition/Element" ]
       ];
       fhir:ElementDefinition.isModifier [ fhir:value "false" ];
       fhir:ElementDefinition.isSummary [ fhir:value "false" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "SLIST.digits" ]
       ]
     ]
  ];
  fhir:StructureDefinition.differential [
     fhir:StructureDefinition.element [
       fhir:index 0;
       fhir:Element.id [ fhir:value "SampledData" ];
       fhir:Element.extension [
         fhir:index 0;
         fhir:Extension.url [ fhir:value "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status" ];
         fhir:Extension.value [ fhir:value "trial-use" ]
       ];
       fhir:ElementDefinition.path [ fhir:value "SampledData" ];
       fhir:ElementDefinition.short [ fhir:value "A series of measurements taken by a device" ];
       fhir:ElementDefinition.definition [ fhir:value "A series of measurements taken by a device, with upper and lower limits. There may be more than one dimension in the data." ];
       fhir:ElementDefinition.comment [ fhir:value "The data is not interpretable without at least origin, period, and dimensions, but these are optional to allow a separation between the template of measurement and the actual measurement, such as between DeviceCapabilities and DeviceLog.  When providing a summary view (for example with Observation.value[x]) SampledData should be represented with a brief display text such as \"Sampled Data\"." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "*" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "v2" ];
         fhir:ElementDefinition.map [ fhir:value "N/A (but see section 7.14 in v2.7)" ]
       ], [
         fhir:index 1;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "SLIST + GLIST" ]
       ]
     ], [
       fhir:index 1;
       fhir:Element.id [ fhir:value "SampledData.origin" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.origin" ];
       fhir:ElementDefinition.short [ fhir:value "Zero value and units" ];
       fhir:ElementDefinition.definition [ fhir:value "The base quantity that a measured value of zero represents. In addition, this provides the units of the entire measurement series." ];
       fhir:ElementDefinition.min [ fhir:value "1" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "Quantity" ];
         fhir:ElementDefinition.profile [
           fhir:value "http://hl7.org/fhir/StructureDefinition/SimpleQuantity";
           fhir:index 0
         ]
       ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "SLIST.origin" ]
       ]
     ], [
       fhir:index 2;
       fhir:Element.id [ fhir:value "SampledData.period" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.period" ];
       fhir:ElementDefinition.short [ fhir:value "Number of milliseconds between samples" ];
       fhir:ElementDefinition.definition [ fhir:value "The length of time between sampling times, measured in milliseconds." ];
       fhir:ElementDefinition.comment [ fhir:value "This is usually a whole number." ];
       fhir:ElementDefinition.min [ fhir:value "1" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "decimal" ]
       ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "GLIST.increment" ]
       ]
     ], [
       fhir:index 3;
       fhir:Element.id [ fhir:value "SampledData.factor" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.factor" ];
       fhir:ElementDefinition.short [ fhir:value "Multiply data by this before adding to origin" ];
       fhir:ElementDefinition.definition [ fhir:value "A correction factor that is applied to the sampled data points before they are added to the origin." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "decimal" ]
       ];
       fhir:ElementDefinition.meaningWhenMissing [ fhir:value "If no factor is assigned, the data is not adjusted before adding to the origin" ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "SLIST.factor" ]
       ]
     ], [
       fhir:index 4;
       fhir:Element.id [ fhir:value "SampledData.lowerLimit" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.lowerLimit" ];
       fhir:ElementDefinition.short [ fhir:value "Lower limit of detection" ];
       fhir:ElementDefinition.definition [ fhir:value "The lower limit of detection of the measured points. This is needed if any of the data points have the value \"L\" (lower than detection limit)." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "decimal" ]
       ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "N/A (use SLIST.digits.nullFlavor)" ]
       ]
     ], [
       fhir:index 5;
       fhir:Element.id [ fhir:value "SampledData.upperLimit" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.upperLimit" ];
       fhir:ElementDefinition.short [ fhir:value "Upper limit of detection" ];
       fhir:ElementDefinition.definition [ fhir:value "The upper limit of detection of the measured points. This is needed if any of the data points have the value \"U\" (higher than detection limit)." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "decimal" ]
       ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "N/A (use SLIST.digits.nullFlavor)" ]
       ]
     ], [
       fhir:index 6;
       fhir:Element.id [ fhir:value "SampledData.dimensions" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.dimensions" ];
       fhir:ElementDefinition.short [ fhir:value "Number of sample points at each time point" ];
       fhir:ElementDefinition.definition [ fhir:value "The number of sample points at each time point. If this value is greater than one, then the dimensions will be interlaced - all the sample points for a point in time will be recorded at once." ];
       fhir:ElementDefinition.comment [ fhir:value "If there is more than one dimension, the code for the type of data will define the meaning of the dimensions (typically ECG data)." ];
       fhir:ElementDefinition.min [ fhir:value "1" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "positiveInt" ]
       ];
       fhir:ElementDefinition.isSummary [ fhir:value "true" ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "N/A (fixed to 1)" ]
       ]
     ], [
       fhir:index 7;
       fhir:Element.id [ fhir:value "SampledData.data" ];
       fhir:ElementDefinition.path [ fhir:value "SampledData.data" ];
       fhir:ElementDefinition.short [ fhir:value "Decimal values with spaces, or \"E\" | \"U\" | \"L\"" ];
       fhir:ElementDefinition.definition [ fhir:value "A series of data points which are decimal values separated by a single space (character u20). The special values \"E\" (error), \"L\" (below detection limit) and \"U\" (above detection limit) can also be used in place of a decimal value." ];
       fhir:ElementDefinition.comment [ fhir:value "Data may be missing if it is omitted for summarization purposes. In general, data is required for any actual use of a SampledData." ];
       fhir:ElementDefinition.min [ fhir:value "0" ];
       fhir:ElementDefinition.max [ fhir:value "1" ];
       fhir:ElementDefinition.type [
         fhir:index 0;
         fhir:ElementDefinition.code [ fhir:value "string" ]
       ];
       fhir:ElementDefinition.mapping [
         fhir:index 0;
         fhir:ElementDefinition.identity [ fhir:value "rim" ];
         fhir:ElementDefinition.map [ fhir:value "SLIST.digits" ]
       ]
     ]
  ] .

# -------------------------------------------------------------------------------------

Usage note: every effort has been made to ensure that the examples are correct and useful, but they are not a normative part of the specification.