Release 4B
FoundationThis page is part of the FHIR Specification (v4.3.0: R4B - STU). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions 
. Page versions: R5 R4B R4 R3
| Patient Care Work Group | Maturity Level: N/A | Standards Status: Informative | Compartments: Device, Encounter, Patient, Practitioner, RelatedPerson |
ShEx statement for communication
PREFIX fhir: <http://hl7.org/fhir/>
PREFIX fhirvs: <http://hl7.org/fhir/ValueSet/>
PREFIX xsd: <http://www.w3.org/2001/XMLSchema#>
BASE <http://hl7.org/fhir/shape/>
start=@<Communication> AND {fhir:nodeRole [fhir:treeRoot]}
# A record of information transmitted from a sender to a receiver
<Communication> CLOSED {
a [fhir:Communication];
fhir:nodeRole [fhir:treeRoot]?;
fhir:Resource.id id?; # Logical id of this artifact
fhir:Resource.meta @<Meta>?; # Metadata about the resource
fhir:Resource.implicitRules @<uri>?; # A set of rules under which this
# content was created
fhir:Resource.language @<code>?; # Language of the resource content
fhir:DomainResource.text @<Narrative>?; # Text summary of the resource, for
# human interpretation
fhir:DomainResource.contained @<Resource>*; # Contained, inline Resources
fhir:DomainResource.extension @<Extension>*; # Additional content defined by
# implementations
fhir:DomainResource.modifierExtension @<Extension>*; # Extensions that cannot be ignored
fhir:Communication.identifier @<Identifier>*; # Unique identifier
fhir:Communication.instantiatesCanonical @<canonical>*; # Instantiates FHIR protocol or
# definition
fhir:Communication.instantiatesUri @<uri>*; # Instantiates external protocol or
# definition
fhir:Communication.basedOn @<Reference>*; # Request fulfilled by this
# communication
fhir:Communication.partOf @<Reference>*; # Part of this action
fhir:Communication.inResponseTo @<Reference>*; # Reply to
fhir:Communication.status @<code> AND
{fhir:value @fhirvs:event-status}; # preparation | in-progress |
# not-done | on-hold | stopped |
# completed | entered-in-error |
# unknown
fhir:Communication.statusReason @<CodeableConcept>?; # Reason for current status
fhir:Communication.category @<CodeableConcept>*; # Message category
fhir:Communication.priority @<code> AND
{fhir:value @fhirvs:request-priority}?; # routine | urgent | asap | stat
fhir:Communication.medium @<CodeableConcept>*; # A channel of communication
fhir:Communication.subject @<Reference>?; # Focus of message
fhir:Communication.topic @<CodeableConcept>?; # Description of the purpose/content
fhir:Communication.about @<Reference>*; # Resources that pertain to this
# communication
fhir:Communication.encounter @<Reference>?; # Encounter created as part of
fhir:Communication.sent @<dateTime>?; # When sent
fhir:Communication.received @<dateTime>?; # When received
fhir:Communication.recipient @<Reference>*; # Message recipient
fhir:Communication.sender @<Reference>?; # Message sender
fhir:Communication.reasonCode @<CodeableConcept>*; # Indication for message
fhir:Communication.reasonReference @<Reference>*; # Why was communication done?
fhir:Communication.payload @<Communication.payload>*; # Message payload
fhir:Communication.note @<Annotation>*; # Comments made about the
# communication
fhir:index xsd:integer? # Relative position in a list
}
# Message payload
<Communication.payload> CLOSED {
fhir:Element.id string?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:BackboneElement.modifierExtension @<Extension>*; # Extensions that cannot be ignored
# even if unrecognized
( # Message part content
fhir:Communication.payload.contentString @<string> |
fhir:Communication.payload.contentAttachment @<Attachment> |
fhir:Communication.payload.contentReference @<Reference>
);
fhir:index xsd:integer? # Relative position in a list
}
#---------------------- Data Types -------------------
# Primitive Type dateTime
<dateTime> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value dateTime?; # Primitive value for dateTime
fhir:index xsd:integer? # Relative position in a list
}
# Metadata about a resource
<Meta> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Meta.versionId @<id>?; # Version specific identifier
fhir:Meta.lastUpdated @<instant>?; # When the resource version last
# changed
fhir:Meta.source @<uri>?; # Identifies where the resource
# comes from
fhir:Meta.profile @<canonical>*; # Profiles this resource claims to
# conform to
fhir:Meta.security @<Coding>*; # Security Labels applied to this
# resource
fhir:Meta.tag @<Coding>*; # Tags applied to this resource
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type code
<code> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value code?; # Primitive value for code
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type string
<string> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value string MAXLENGTH 1048576?; # Primitive value for string
fhir:index xsd:integer? # Relative position in a list
}
# A reference from one resource to another
<Reference> CLOSED {
fhir:link IRI?;
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Reference.reference @<string>?; # Literal reference, Relative,
# internal or absolute URL
fhir:Reference.type @<uri>?; # Type the reference refers to (e.g.
# "Patient")
fhir:Reference.identifier @<Identifier>?; # Logical reference, when literal
# reference is not known
fhir:Reference.display @<string>?; # Text alternative for the resource
fhir:index xsd:integer? # Relative position in a list
}
# Base Resource
<Resource> {a .+;
fhir:Resource.id id?; # Logical id of this artifact
fhir:Resource.meta @<Meta>?; # Metadata about the resource
fhir:Resource.implicitRules @<uri>?; # A set of rules under which this
# content was created
fhir:Resource.language @<code>?; # Language of the resource content
fhir:index xsd:integer?
}
# Content in a format defined elsewhere
<Attachment> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Attachment.contentType @<code> AND
{fhir:value @fhirvs:mimetypes}?; # Mime type of the content, with
# charset etc.
fhir:Attachment.language @<code>?; # Human language of the content
# (BCP-47)
fhir:Attachment.data @<base64Binary>?; # Data inline, base64ed
fhir:Attachment.url @<url>?; # Uri where the data can be found
fhir:Attachment.size @<unsignedInt>?; # Number of bytes of content (if url
# provided)
fhir:Attachment.hash @<base64Binary>?; # Hash of the data (sha-1, base64ed)
fhir:Attachment.title @<string>?; # Label to display in place of the
# data
fhir:Attachment.creation @<dateTime>?; # Date attachment was first created
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type canonical
<canonical> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value canonical?; # Primitive value for canonical
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type uri
<uri> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value uri?; # Primitive value for uri
fhir:index xsd:integer? # Relative position in a list
}
# Text node with attribution
<Annotation> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
( # Individual responsible for the
# annotation
fhir:Annotation.authorReference @<Reference> |
fhir:Annotation.authorString @<string>
)?;
fhir:Annotation.time @<dateTime>?; # When the annotation was made
fhir:Annotation.text @<markdown>; # The annotation - text content (as
# markdown)
fhir:index xsd:integer? # Relative position in a list
}
# Optional Extensions Element
<Extension> CLOSED {
fhir:Element.id id?;
fhir:Element.extension @<Extension>*;
fhir:Extension.url uri;
(
fhir:Extension.valueBase64Binary @<base64Binary> |
fhir:Extension.valueBoolean @<boolean> |
fhir:Extension.valueCanonical @<canonical> |
fhir:Extension.valueCode @<code> |
fhir:Extension.valueDate @<date> |
fhir:Extension.valueDateTime @<dateTime> |
fhir:Extension.valueDecimal @<decimal> |
fhir:Extension.valueId @<id> |
fhir:Extension.valueInstant @<instant> |
fhir:Extension.valueInteger @<integer> |
fhir:Extension.valueMarkdown @<markdown> |
fhir:Extension.valueOid @<oid> |
fhir:Extension.valuePositiveInt @<positiveInt> |
fhir:Extension.valueString @<string> |
fhir:Extension.valueTime @<time> |
fhir:Extension.valueUnsignedInt @<unsignedInt> |
fhir:Extension.valueUri @<uri> |
fhir:Extension.valueUrl @<url> |
fhir:Extension.valueUuid @<uuid> |
fhir:Extension.valueAddress @<Address> |
fhir:Extension.valueAge @<Age> |
fhir:Extension.valueAnnotation @<Annotation> |
fhir:Extension.valueAttachment @<Attachment> |
fhir:Extension.valueCodeableConcept @<CodeableConcept> |
fhir:Extension.valueCodeableReference @<CodeableReference> |
fhir:Extension.valueCoding @<Coding> |
fhir:Extension.valueContactPoint @<ContactPoint> |
fhir:Extension.valueCount @<Count> |
fhir:Extension.valueDistance @<Distance> |
fhir:Extension.valueDuration @<Duration> |
fhir:Extension.valueHumanName @<HumanName> |
fhir:Extension.valueIdentifier @<Identifier> |
fhir:Extension.valueMoney @<Money> |
fhir:Extension.valuePeriod @<Period> |
fhir:Extension.valueQuantity @<Quantity> |
fhir:Extension.valueRange @<Range> |
fhir:Extension.valueRatio @<Ratio> |
fhir:Extension.valueRatioRange @<RatioRange> |
fhir:Extension.valueReference @<Reference> |
fhir:Extension.valueSampledData @<SampledData> |
fhir:Extension.valueSignature @<Signature> |
fhir:Extension.valueTiming @<Timing> |
fhir:Extension.valueContactDetail @<ContactDetail> |
fhir:Extension.valueContributor @<Contributor> |
fhir:Extension.valueDataRequirement @<DataRequirement> |
fhir:Extension.valueExpression @<Expression> |
fhir:Extension.valueParameterDefinition @<ParameterDefinition> |
fhir:Extension.valueRelatedArtifact @<RelatedArtifact> |
fhir:Extension.valueTriggerDefinition @<TriggerDefinition> |
fhir:Extension.valueUsageContext @<UsageContext> |
fhir:Extension.valueDosage @<Dosage>
)?;
fhir:index xsd:integer? # Relative position in a list
}
# An identifier intended for computation
<Identifier> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Identifier.use @<code> AND
{fhir:value @fhirvs:identifier-use}?; # usual | official | temp |
# secondary | old (If known)
fhir:Identifier.type @<CodeableConcept>?; # Description of identifier
fhir:Identifier.system @<uri>?; # The namespace for the identifier
# value
fhir:Identifier.value @<string>?; # The value that is unique
fhir:Identifier.period @<Period>?; # Time period when id is/was valid
# for use
fhir:Identifier.assigner @<Reference>?; # Organization that issued id (may
# be just text)
fhir:index xsd:integer? # Relative position in a list
}
# Human-readable summary of the resource (essential clinical and business information)
<Narrative> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Narrative.status @<code> AND
{fhir:value @fhirvs:narrative-status}; # generated | extensions |
# additional | empty
fhir:Narrative.div xsd:string; # Limited xhtml content
fhir:index xsd:integer? # Relative position in a list
}
# Concept - reference to a terminology or just text
<CodeableConcept> CLOSED {
a NONLITERAL*;
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:CodeableConcept.coding @<Coding>*; # Code defined by a terminology
# system
fhir:CodeableConcept.text @<string>?; # Plain text representation of the
# concept
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type date
<date> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value date?; # Primitive value for date
fhir:index xsd:integer? # Relative position in a list
}
# An address expressed using postal conventions (as opposed to GPS or other location definition formats)
<Address> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Address.use @<code> AND
{fhir:value @fhirvs:address-use}?; # home | work | temp | old | billing
# - purpose of this address
fhir:Address.type @<code> AND
{fhir:value @fhirvs:address-type}?; # postal | physical | both
fhir:Address.text @<string>?; # Text representation of the address
fhir:Address.line @<string>*; # Street name, number, direction &
# P.O. Box etc.
fhir:Address.city @<string>?; # Name of city, town etc.
fhir:Address.district @<string>?; # District name (aka county)
fhir:Address.state @<string>?; # Sub-unit of country (abbreviations
# ok)
fhir:Address.postalCode @<string>?; # Postal code for area
fhir:Address.country @<string>?; # Country (e.g. can be ISO 3166 2 or
# 3 letter code)
fhir:Address.period @<Period>?; # Time period when address was/is in
# use
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type integer
<integer> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value integer MININCLUSIVE -2147483648 MAXINCLUSIVE 2147483647?; # Primitive value for integer
fhir:index xsd:integer? # Relative position in a list
}
# A measured or measurable amount
<Count> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Quantity.value @<decimal>?; # Numerical value (with implicit
# precision)
fhir:Quantity.comparator @<code> AND
{fhir:value @fhirvs:quantity-comparator}?; # < | <= | >= | > - how to
# understand the value
fhir:Quantity.unit @<string>?; # Unit representation
fhir:Quantity.system @<uri>?; # System that defines coded unit form
fhir:Quantity.code @<code>?; # Coded form of the unit
fhir:index xsd:integer? # Relative position in a list
}
# Describes a required data item
<DataRequirement> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:DataRequirement.type @<code> AND
{fhir:value @fhirvs:all-types}; # The type of the required data
fhir:DataRequirement.profile @<canonical>*; # The profile of the required data
( # E.g. Patient, Practitioner,
# RelatedPerson, Organization,
# Location, Device
fhir:DataRequirement.subjectCodeableConcept @<CodeableConcept> |
fhir:DataRequirement.subjectReference @<Reference>
)?;
fhir:DataRequirement.mustSupport @<string>*; # Indicates specific structure
# elements that are referenced by
# the knowledge module
fhir:DataRequirement.codeFilter @<DataRequirement.codeFilter>*; # What codes are expected
fhir:DataRequirement.dateFilter @<DataRequirement.dateFilter>*; # What dates/date ranges are expected
fhir:DataRequirement.limit @<positiveInt>?; # Number of results
fhir:DataRequirement.sort @<DataRequirement.sort>*; # Order of the results
fhir:index xsd:integer? # Relative position in a list
}
# How the medication is/was taken or should be taken
<Dosage> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:BackboneElement.modifierExtension @<Extension>*; # Extensions that cannot be ignored
# even if unrecognized
fhir:Dosage.sequence @<integer>?; # The order of the dosage
# instructions
fhir:Dosage.text @<string>?; # Free text dosage instructions e.g.
# SIG
fhir:Dosage.additionalInstruction @<CodeableConcept>*; # Supplemental instruction or
# warnings to the patient - e.g.
# "with meals", "may cause
# drowsiness"
fhir:Dosage.patientInstruction @<string>?; # Patient or consumer oriented
# instructions
fhir:Dosage.timing @<Timing>?; # When medication should be
# administered
( # Take "as needed" (for x)
fhir:Dosage.asNeededBoolean @<boolean> |
fhir:Dosage.asNeededCodeableConcept @<CodeableConcept>
)?;
fhir:Dosage.site @<CodeableConcept>?; # Body site to administer to
fhir:Dosage.route @<CodeableConcept>?; # How drug should enter body
fhir:Dosage.method @<CodeableConcept>?; # Technique for administering
# medication
fhir:Dosage.doseAndRate @<Dosage.doseAndRate>*; # Amount of medication administered
fhir:Dosage.maxDosePerPeriod @<Ratio>?; # Upper limit on medication per unit
# of time
fhir:Dosage.maxDosePerAdministration @<SimpleQuantity>?; # Upper limit on medication per
# administration
fhir:Dosage.maxDosePerLifetime @<SimpleQuantity>?; # Upper limit on medication per
# lifetime of the patient
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type uuid
<uuid> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value uuid?; # Primitive value for uuid
fhir:index xsd:integer? # Relative position in a list
}
# Range of ratio values
<RatioRange> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:RatioRange.lowNumerator @<SimpleQuantity>?; # Low Numerator limit
fhir:RatioRange.highNumerator @<SimpleQuantity>?; # High Numerator limit
fhir:RatioRange.denominator @<SimpleQuantity>?; # Denominator value
fhir:index xsd:integer? # Relative position in a list
}
# A reference to a code defined by a terminology system
<Coding> CLOSED {
a NONLITERAL?;
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Coding.system @<uri>?; # Identity of the terminology system
fhir:Coding.version @<string>?; # Version of the system - if relevant
fhir:Coding.code @<code>?; # Symbol in syntax defined by the
# system
fhir:Coding.display @<string>?; # Representation defined by the
# system
fhir:Coding.userSelected @<boolean>?; # If this coding was chosen directly
# by the user
fhir:index xsd:integer? # Relative position in a list
}
# A series of measurements taken by a device
<SampledData> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:SampledData.origin @<SimpleQuantity>; # Zero value and units
fhir:SampledData.period @<decimal>; # Number of milliseconds between
# samples
fhir:SampledData.factor @<decimal>?; # Multiply data by this before
# adding to origin
fhir:SampledData.lowerLimit @<decimal>?; # Lower limit of detection
fhir:SampledData.upperLimit @<decimal>?; # Upper limit of detection
fhir:SampledData.dimensions @<positiveInt>; # Number of sample points at each
# time point
fhir:SampledData.data @<string>?; # Decimal values with spaces, or "E"
# | "U" | "L"
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type id
<id> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value id?; # Primitive value for id
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type positiveInt
<positiveInt> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value positiveInt?; # Primitive value for positiveInt
fhir:index xsd:integer? # Relative position in a list
}
# A length - a value with a unit that is a physical distance
<Distance> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Quantity.value @<decimal>?; # Numerical value (with implicit
# precision)
fhir:Quantity.comparator @<code> AND
{fhir:value @fhirvs:quantity-comparator}?; # < | <= | >= | > - how to
# understand the value
fhir:Quantity.unit @<string>?; # Unit representation
fhir:Quantity.system @<uri>?; # System that defines coded unit form
fhir:Quantity.code @<code>?; # Coded form of the unit
fhir:index xsd:integer? # Relative position in a list
}
# Time range defined by start and end date/time
<Period> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Period.start @<dateTime>?; # Starting time with inclusive
# boundary
fhir:Period.end @<dateTime>?; # End time with inclusive boundary,
# if not ongoing
fhir:index xsd:integer? # Relative position in a list
}
# A length of time
<Duration> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Quantity.value @<decimal>?; # Numerical value (with implicit
# precision)
fhir:Quantity.comparator @<code> AND
{fhir:value @fhirvs:quantity-comparator}?; # < | <= | >= | > - how to
# understand the value
fhir:Quantity.unit @<string>?; # Unit representation
fhir:Quantity.system @<uri>?; # System that defines coded unit form
fhir:Quantity.code @<code>?; # Coded form of the unit
fhir:index xsd:integer? # Relative position in a list
}
# Set of values bounded by low and high
<Range> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Range.low @<SimpleQuantity>?; # Low limit
fhir:Range.high @<SimpleQuantity>?; # High limit
fhir:index xsd:integer? # Relative position in a list
}
# Related artifacts for a knowledge resource
<RelatedArtifact> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:RelatedArtifact.type @<code> AND
{fhir:value @fhirvs:related-artifact-type}; # documentation | justification |
# citation | predecessor | successor
# | derived-from | depends-on |
# composed-of
fhir:RelatedArtifact.label @<string>?; # Short label
fhir:RelatedArtifact.display @<string>?; # Brief description of the related
# artifact
fhir:RelatedArtifact.citation @<markdown>?; # Bibliographic citation for the
# artifact
fhir:RelatedArtifact.url @<url>?; # Where the artifact can be accessed
fhir:RelatedArtifact.document @<Attachment>?; # What document is being referenced
fhir:RelatedArtifact.resource @<canonical>?; # What resource is being referenced
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type base64Binary
<base64Binary> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value base64Binary?; # Primitive value for base64Binary
fhir:index xsd:integer? # Relative position in a list
}
# Describes the context of use for a conformance or knowledge resource
<UsageContext> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:UsageContext.code @<Coding>; # Type of context being specified
( # Value that defines the context
fhir:UsageContext.valueCodeableConcept @<CodeableConcept> |
fhir:UsageContext.valueQuantity @<Quantity> |
fhir:UsageContext.valueRange @<Range> |
fhir:UsageContext.valueReference @<Reference>
);
fhir:index xsd:integer? # Relative position in a list
}
# A timing schedule that specifies an event that may occur multiple times
<Timing> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:BackboneElement.modifierExtension @<Extension>*; # Extensions that cannot be ignored
# even if unrecognized
fhir:Timing.event @<dateTime>*; # When the event occurs
fhir:Timing.repeat @<Timing.repeat>?; # When the event is to occur
fhir:Timing.code @<CodeableConcept>?; # BID | TID | QID | AM | PM | QD |
# QOD | +
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type decimal
<decimal> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value decimal?; # Primitive value for decimal
fhir:index xsd:integer? # Relative position in a list
}
# Definition of a parameter to a module
<ParameterDefinition> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:ParameterDefinition.name @<code>?; # Name used to access the parameter
# value
fhir:ParameterDefinition.use @<code> AND
{fhir:value @fhirvs:operation-parameter-use}; # in | out
fhir:ParameterDefinition.min @<integer>?; # Minimum cardinality
fhir:ParameterDefinition.max @<string>?; # Maximum cardinality (a number of *)
fhir:ParameterDefinition.documentation @<string>?; # A brief description of the
# parameter
fhir:ParameterDefinition.type @<code> AND
{fhir:value @fhirvs:all-types}; # What type of value
fhir:ParameterDefinition.profile @<canonical>?; # What profile the value is expected
# to be
fhir:index xsd:integer? # Relative position in a list
}
# Contributor information
<Contributor> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Contributor.type @<code> AND
{fhir:value @fhirvs:contributor-type}; # author | editor | reviewer |
# endorser
fhir:Contributor.name @<string>; # Who contributed the content
fhir:Contributor.contact @<ContactDetail>*; # Contact details of the contributor
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type oid
<oid> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value oid?; # Primitive value for oid
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type instant
<instant> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value instant?; # Primitive value for instant
fhir:index xsd:integer? # Relative position in a list
}
# Details of a Technology mediated contact point (phone, fax, email, etc.)
<ContactPoint> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:ContactPoint.system @<code> AND
{fhir:value @fhirvs:contact-point-system}?; # phone | fax | email | pager | url
# | sms | other
fhir:ContactPoint.value @<string>?; # The actual contact point details
fhir:ContactPoint.use @<code> AND
{fhir:value @fhirvs:contact-point-use}?; # home | work | temp | old | mobile
# - purpose of this contact point
fhir:ContactPoint.rank @<positiveInt>?; # Specify preferred order of use (1
# = highest)
fhir:ContactPoint.period @<Period>?; # Time period when the contact point
# was/is in use
fhir:index xsd:integer? # Relative position in a list
}
# Name of a human - parts and usage
<HumanName> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:HumanName.use @<code> AND
{fhir:value @fhirvs:name-use}?; # usual | official | temp | nickname
# | anonymous | old | maiden
fhir:HumanName.text @<string>?; # Text representation of the full
# name
fhir:HumanName.family @<string>?; # Family name (often called
# 'Surname')
fhir:HumanName.given @<string>*; # Given names (not always 'first').
# Includes middle names
fhir:HumanName.prefix @<string>*; # Parts that come before the name
fhir:HumanName.suffix @<string>*; # Parts that come after the name
fhir:HumanName.period @<Period>?; # Time period when name was/is in use
fhir:index xsd:integer? # Relative position in a list
}
# An amount of economic utility in some recognized currency
<Money> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Money.value @<decimal>?; # Numerical value (with implicit
# precision)
fhir:Money.currency @<code> AND
{fhir:value @fhirvs:currencies}?; # ISO 4217 Currency Code
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type markdown
<markdown> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value markdown?; # Primitive value for markdown
fhir:index xsd:integer? # Relative position in a list
}
# A ratio of two Quantity values - a numerator and a denominator
<Ratio> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Ratio.numerator @<Quantity>?; # Numerator value
fhir:Ratio.denominator @<Quantity>?; # Denominator value
fhir:index xsd:integer? # Relative position in a list
}
# A duration of time during which an organism (or a process) has existed
<Age> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Quantity.value @<decimal>?; # Numerical value (with implicit
# precision)
fhir:Quantity.comparator @<code> AND
{fhir:value @fhirvs:quantity-comparator}?; # < | <= | >= | > - how to
# understand the value
fhir:Quantity.unit @<string>?; # Unit representation
fhir:Quantity.system @<uri>?; # System that defines coded unit form
fhir:Quantity.code @<code>?; # Coded form of the unit
fhir:index xsd:integer? # Relative position in a list
}
# Defines an expected trigger for a module
<TriggerDefinition> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:TriggerDefinition.type @<code> AND
{fhir:value @fhirvs:trigger-type}; # named-event | periodic |
# data-changed | data-added |
# data-modified | data-removed |
# data-accessed | data-access-ended
fhir:TriggerDefinition.name @<string>?; # Name or URI that identifies the
# event
( # Timing of the event
fhir:TriggerDefinition.timingTiming @<Timing> |
fhir:TriggerDefinition.timingReference @<Reference> |
fhir:TriggerDefinition.timingDate @<date> |
fhir:TriggerDefinition.timingDateTime @<dateTime>
)?;
fhir:TriggerDefinition.data @<DataRequirement>*; # Triggering data of the event
# (multiple = 'and')
fhir:TriggerDefinition.condition @<Expression>?; # Whether the event triggers
# (boolean expression)
fhir:index xsd:integer? # Relative position in a list
}
# A measured or measurable amount
<Quantity> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Quantity.value @<decimal>?; # Numerical value (with implicit
# precision)
fhir:Quantity.comparator @<code> AND
{fhir:value @fhirvs:quantity-comparator}?; # < | <= | >= | > - how to
# understand the value
fhir:Quantity.unit @<string>?; # Unit representation
fhir:Quantity.system @<uri>?; # System that defines coded unit form
fhir:Quantity.code @<code>?; # Coded form of the unit
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type url
<url> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value url?; # Primitive value for url
fhir:index xsd:integer? # Relative position in a list
}
# Contact information
<ContactDetail> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:ContactDetail.name @<string>?; # Name of an individual to contact
fhir:ContactDetail.telecom @<ContactPoint>*; # Contact details for individual or
# organization
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type boolean
<boolean> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value boolean?; # Primitive value for boolean
fhir:index xsd:integer? # Relative position in a list
}
# An expression that can be used to generate a value
<Expression> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Expression.description @<string>?; # Natural language description of
# the condition
fhir:Expression.name @<id>?; # Short name assigned to expression
# for reuse
fhir:Expression.language @<code>; # text/cql | text/fhirpath |
# application/x-fhir-query |
# text/cql-identifier |
# text/cql-expression | etc.
fhir:Expression.expression @<string>?; # Expression in specified language
fhir:Expression.reference @<uri>?; # Where the expression is found
fhir:index xsd:integer? # Relative position in a list
}
# Reference to a resource or a concept
<CodeableReference> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:CodeableReference.concept @<CodeableConcept>?; # Reference to a concept (by class)
fhir:CodeableReference.reference @<Reference>?; # Reference to a resource (by
# instance)
fhir:index xsd:integer? # Relative position in a list
}
# A Signature - XML DigSig, JWS, Graphical image of signature, etc.
<Signature> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Signature.type @<Coding>+; # Indication of the reason the
# entity signed the object(s)
fhir:Signature.when @<instant>; # When the signature was created
fhir:Signature.who @<Reference>; # Who signed
fhir:Signature.onBehalfOf @<Reference>?; # The party represented
fhir:Signature.targetFormat @<code> AND
{fhir:value @fhirvs:mimetypes}?; # The technical format of the signed
# resources
fhir:Signature.sigFormat @<code> AND
{fhir:value @fhirvs:mimetypes}?; # The technical format of the
# signature
fhir:Signature.data @<base64Binary>?; # The actual signature content (XML
# DigSig. JWS, picture, etc.)
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type unsignedInt
<unsignedInt> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value unsignedInt?; # Primitive value for unsignedInt
fhir:index xsd:integer? # Relative position in a list
}
# Primitive Type time
<time> CLOSED {
fhir:Element.id string?; # xml:id (or equivalent in JSON)
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:value time?; # Primitive value for time
fhir:index xsd:integer? # Relative position in a list
}
# A fixed quantity (no comparator)
<SimpleQuantity> CLOSED {
fhir:Element.id id?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Quantity.value @<decimal>?; # Numerical value (with implicit
# precision)
fhir:Quantity.unit @<string>?; # Unit representation
fhir:Quantity.system @<uri>?; # System that defines coded unit form
fhir:Quantity.code @<code>?; # Coded form of the unit
fhir:index xsd:integer? # Relative position in a list
}
# What dates/date ranges are expected
<DataRequirement.dateFilter> CLOSED {
fhir:Element.id string?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:DataRequirement.dateFilter.path @<string>?; # A date-valued attribute to filter
# on
fhir:DataRequirement.dateFilter.searchParam @<string>?; # A date valued parameter to search
# on
( # The value of the filter, as a
# Period, DateTime, or Duration
# value
fhir:DataRequirement.dateFilter.valueDateTime @<dateTime> |
fhir:DataRequirement.dateFilter.valuePeriod @<Period> |
fhir:DataRequirement.dateFilter.valueDuration @<Duration>
)?;
fhir:index xsd:integer? # Relative position in a list
}
# Amount of medication administered
<Dosage.doseAndRate> CLOSED {
fhir:Element.id string?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:Dosage.doseAndRate.type @<CodeableConcept>?; # The kind of dose or rate specified
( # Amount of medication per dose
fhir:Dosage.doseAndRate.doseRange @<Range> |
fhir:Dosage.doseAndRate.doseQuantity @<SimpleQuantity>
)?;
( # Amount of medication per unit of
# time
fhir:Dosage.doseAndRate.rateRatio @<Ratio> |
fhir:Dosage.doseAndRate.rateRange @<Range> |
fhir:Dosage.doseAndRate.rateQuantity @<SimpleQuantity>
)?;
fhir:index xsd:integer? # Relative position in a list
}
# When the event is to occur
<Timing.repeat> CLOSED {
fhir:Element.id string?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
( # Length/Range of lengths, or (Start
# and/or end) limits
fhir:Timing.repeat.boundsDuration @<Duration> |
fhir:Timing.repeat.boundsRange @<Range> |
fhir:Timing.repeat.boundsPeriod @<Period>
)?;
fhir:Timing.repeat.count @<positiveInt>?; # Number of times to repeat
fhir:Timing.repeat.countMax @<positiveInt>?; # Maximum number of times to repeat
fhir:Timing.repeat.duration @<decimal>?; # How long when it happens
fhir:Timing.repeat.durationMax @<decimal>?; # How long when it happens (Max)
fhir:Timing.repeat.durationUnit @<code> AND
{fhir:value @fhirvs:units-of-time}?; # s | min | h | d | wk | mo | a -
# unit of time (UCUM)
fhir:Timing.repeat.frequency @<positiveInt>?; # Event occurs frequency times per
# period
fhir:Timing.repeat.frequencyMax @<positiveInt>?; # Event occurs up to frequencyMax
# times per period
fhir:Timing.repeat.period @<decimal>?; # Event occurs frequency times per
# period
fhir:Timing.repeat.periodMax @<decimal>?; # Upper limit of period (3-4 hours)
fhir:Timing.repeat.periodUnit @<code> AND
{fhir:value @fhirvs:units-of-time}?; # s | min | h | d | wk | mo | a -
# unit of time (UCUM)
fhir:Timing.repeat.dayOfWeek @<code> AND
{fhir:value @fhirvs:days-of-week}*; # mon | tue | wed | thu | fri | sat
# | sun
fhir:Timing.repeat.timeOfDay @<time>*; # Time of day for action
fhir:Timing.repeat.when @<code> AND
{fhir:value @fhirvs:event-timing}*; # Code for time period of occurrence
fhir:Timing.repeat.offset @<unsignedInt>?; # Minutes from event (before or
# after)
fhir:index xsd:integer? # Relative position in a list
}
# Order of the results
<DataRequirement.sort> CLOSED {
fhir:Element.id string?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:DataRequirement.sort.path @<string>; # The name of the attribute to
# perform the sort
fhir:DataRequirement.sort.direction @<code> AND
{fhir:value @fhirvs:sort-direction}; # ascending | descending
fhir:index xsd:integer? # Relative position in a list
}
# What codes are expected
<DataRequirement.codeFilter> CLOSED {
fhir:Element.id string?; # Unique id for inter-element
# referencing
fhir:Element.extension @<Extension>*; # Additional content defined by
# implementations
fhir:DataRequirement.codeFilter.path @<string>?; # A code-valued attribute to filter
# on
fhir:DataRequirement.codeFilter.searchParam @<string>?; # A coded (token) parameter to
# search on
fhir:DataRequirement.codeFilter.valueSet @<canonical>?; # Valueset for the filter
fhir:DataRequirement.codeFilter.code @<Coding>*; # What code is expected
fhir:index xsd:integer? # Relative position in a list
}
#---------------------- Reference Types -------------------
#---------------------- Value Sets ------------------------
# A unit of time (units from UCUM).
fhirvs:units-of-time ["s" "min" "h" "d" "wk" "mo" "a"]
# The type of an address (physical / postal).
fhirvs:address-type ["postal" "physical" "both"]
# The type of trigger.
fhirvs:trigger-type ["named-event" "periodic" "data-changed" "data-added" "data-modified" "data-removed" "data-accessed" "data-access-ended"]
# The type of contributor.
fhirvs:contributor-type ["author" "editor" "reviewer" "endorser"]
# Telecommunications form for contact point.
fhirvs:contact-point-system ["phone" "fax" "email" "pager" "url" "sms" "other"]
# The status of a resource narrative.
fhirvs:narrative-status ["generated" "extensions" "additional" "empty"]
# The use of a human name.
fhirvs:name-use ["usual" "official" "temp" "nickname" "anonymous" "old" "maiden"]
# Identifies the purpose for this identifier, if known .
fhirvs:identifier-use ["usual" "official" "temp" "secondary" "old"]
# Whether an operation parameter is an input or an output parameter.
fhirvs:operation-parameter-use ["in" "out"]
# Codes identifying the lifecycle stage of an event.
fhirvs:event-status ["preparation" "in-progress" "not-done" "on-hold" "stopped" "completed" "entered-in-error" "unknown"]
# Identifies the level of importance to be assigned to actioning the request.
fhirvs:request-priority ["routine" "urgent" "asap" "stat"]
# The use of an address.
fhirvs:address-use ["home" "work" "temp" "old" "billing"]
# Real world event relating to the schedule.
fhirvs:event-timing ["MORN" "MORN.early" "MORN.late" "NOON" "AFT" "AFT.early" "AFT.late" "EVE" "EVE.early" "EVE.late" "NIGHT" "PHS" "HS" "WAKE" "C" "CM" "CD" "CV" "AC" "ACM" "ACD" "ACV" "PC" "PCM" "PCD" "PCV"]
# The days of the week.
fhirvs:days-of-week ["mon" "tue" "wed" "thu" "fri" "sat" "sun"]
# The type of relationship to the related artifact.
fhirvs:related-artifact-type ["documentation" "justification" "citation" "predecessor" "successor" "derived-from" "depends-on" "composed-of"]
# How the Quantity should be understood and represented.
fhirvs:quantity-comparator ["<" "<=" ">=" ">"]
# A list of all the concrete types defined in this version of the FHIR specification - Abstract Types, Data Types and Resource Types.
fhirvs:all-types ["Address" "Age" "Annotation" "Attachment" "BackboneElement" "CodeableConcept" "CodeableReference" "Coding" "ContactDetail" "ContactPoint" "Contributor" "Count" "DataRequirement" "Distance" "Dosage" "Duration" "Element" "ElementDefinition" "Expression" "Extension" "HumanName" "Identifier" "MarketingStatus" "Meta" "Money" "MoneyQuantity" "Narrative" "ParameterDefinition" "Period" "Population" "ProdCharacteristic" "ProductShelfLife" "Quantity" "Range" "Ratio" "RatioRange" "Reference" "RelatedArtifact" "SampledData" "Signature" "SimpleQuantity" "Timing" "TriggerDefinition" "UsageContext" "base64Binary" "boolean" "canonical" "code" "date" "dateTime" "decimal" "id" "instant" "integer" "markdown" "oid" "positiveInt" "string" "time" "unsignedInt" "uri" "url" "uuid" "xhtml" "Resource" "Binary" "Bundle" "DomainResource" "Account" "ActivityDefinition" "AdministrableProductDefinition" "AdverseEvent" "AllergyIntolerance" "Appointment" "AppointmentResponse" "AuditEvent" "Basic" "BiologicallyDerivedProduct" "BodyStructure" "CapabilityStatement" "CarePlan" "CareTeam" "CatalogEntry" "ChargeItem" "ChargeItemDefinition" "Citation" "Claim" "ClaimResponse" "ClinicalImpression" "ClinicalUseDefinition" "CodeSystem" "Communication" "CommunicationRequest" "CompartmentDefinition" "Composition" "ConceptMap" "Condition" "Consent" "Contract" "Coverage" "CoverageEligibilityRequest" "CoverageEligibilityResponse" "DetectedIssue" "Device" "DeviceDefinition" "DeviceMetric" "DeviceRequest" "DeviceUseStatement" "DiagnosticReport" "DocumentManifest" "DocumentReference" "Encounter" "Endpoint" "EnrollmentRequest" "EnrollmentResponse" "EpisodeOfCare" "EventDefinition" "Evidence" "EvidenceReport" "EvidenceVariable" "ExampleScenario" "ExplanationOfBenefit" "FamilyMemberHistory" "Flag" "Goal" "GraphDefinition" "Group" "GuidanceResponse" "HealthcareService" "ImagingStudy" "Immunization" "ImmunizationEvaluation" "ImmunizationRecommendation" "ImplementationGuide" "Ingredient" "InsurancePlan" "Invoice" "Library" "Linkage" "List" "Location" "ManufacturedItemDefinition" "Measure" "MeasureReport" "Media" "Medication" "MedicationAdministration" "MedicationDispense" "MedicationKnowledge" "MedicationRequest" "MedicationStatement" "MedicinalProductDefinition" "MessageDefinition" "MessageHeader" "MolecularSequence" "NamingSystem" "NutritionOrder" "NutritionProduct" "Observation" "ObservationDefinition" "OperationDefinition" "OperationOutcome" "Organization" "OrganizationAffiliation" "PackagedProductDefinition" "Patient" "PaymentNotice" "PaymentReconciliation" "Person" "PlanDefinition" "Practitioner" "PractitionerRole" "Procedure" "Provenance" "Questionnaire" "QuestionnaireResponse" "RegulatedAuthorization" "RelatedPerson" "RequestGroup" "ResearchDefinition" "ResearchElementDefinition" "ResearchStudy" "ResearchSubject" "RiskAssessment" "Schedule" "SearchParameter" "ServiceRequest" "Slot" "Specimen" "SpecimenDefinition" "StructureDefinition" "StructureMap" "Subscription" "SubscriptionStatus" "SubscriptionTopic" "Substance" "SubstanceDefinition" "SupplyDelivery" "SupplyRequest" "Task" "TerminologyCapabilities" "TestReport" "TestScript" "ValueSet" "VerificationResult" "VisionPrescription" "Parameters" "Type" "Any"]
# Use of contact point.
fhirvs:contact-point-use ["home" "work" "temp" "old" "mobile"]
# Currency codes from ISO 4217 (see https://www.iso.org/iso-4217-currency-codes.html)
fhirvs:currencies ["AED" "AFN" "ALL" "AMD" "ANG" "AOA" "ARS" "AUD" "AWG" "AZN" "BAM" "BBD" "BDT" "BGN" "BHD" "BIF" "BMD" "BND" "BOB" "BOV" "BRL" "BSD" "BTN" "BWP" "BYN" "BZD" "CAD" "CDF" "CHE" "CHF" "CHW" "CLF" "CLP" "CNY" "COP" "COU" "CRC" "CUC" "CUP" "CVE" "CZK" "DJF" "DKK" "DOP" "DZD" "EGP" "ERN" "ETB" "EUR" "FJD" "FKP" "GBP" "GEL" "GGP" "GHS" "GIP" "GMD" "GNF" "GTQ" "GYD" "HKD" "HNL" "HRK" "HTG" "HUF" "IDR" "ILS" "IMP" "INR" "IQD" "IRR" "ISK" "JEP" "JMD" "JOD" "JPY" "KES" "KGS" "KHR" "KMF" "KPW" "KRW" "KWD" "KYD" "KZT" "LAK" "LBP" "LKR" "LRD" "LSL" "LYD" "MAD" "MDL" "MGA" "MKD" "MMK" "MNT" "MOP" "MRU" "MUR" "MVR" "MWK" "MXN" "MXV" "MYR" "MZN" "NAD" "NGN" "NIO" "NOK" "NPR" "NZD" "OMR" "PAB" "PEN" "PGK" "PHP" "PKR" "PLN" "PYG" "QAR" "RON" "RSD" "RUB" "RWF" "SAR" "SBD" "SCR" "SDG" "SEK" "SGD" "SHP" "SLL" "SOS" "SRD" "SSP" "STN" "SVC" "SYP" "SZL" "THB" "TJS" "TMT" "TND" "TOP" "TRY" "TTD" "TVD" "TWD" "TZS" "UAH" "UGX" "USD" "USN" "UYI" "UYU" "UZS" "VEF" "VND" "VUV" "WST" "XAF" "XAG" "XAU" "XBA" "XBB" "XBC" "XBD" "XCD" "XDR" "XOF" "XPD" "XPF" "XPT" "XSU" "XTS" "XUA" "XXX" "YER" "ZAR" "ZMW" "ZWL"]
# The possible sort directions, ascending or descending.
fhirvs:sort-direction ["ascending" "descending"]
# This value set includes all possible codes from BCP-13 (http://tools.ietf.org/html/bcp13)
fhirvs:mimetypes EXTERNAL
Usage note: every effort has been made to ensure that the ShEx files are correct and useful, but they are not a normative part of the specification.
FHIR ®© HL7.org 2011+. FHIR Release 4B (v4.3.0) hl7.fhir.r4b.core#4.3.0 generated on Sat, May 28, 2022 12:54+1000.
Links: Search |
Version History |
Table of Contents |
QA Page |
Compare to R4 |
|
Propose a change