Clinical Document Architecture V2.0.1
2.1.0-draft1 - 1st Draft
Clinical Document Architecture V2.0.1
2.1.0-draft1 - 1st Draft
This page is part of the CDA: Clinical Document Architecture (v2.1.0-draft1: CDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions 
| Active as of 2023-01-16 |
Definitions for the Supply logical model.
Guidance on how to interpret the contents of this table can be found here.
| 1. Supply | |
| Control | 1..1 |
| XML Representation | In the XML format, this property has the namespace urn:hl7-org:v3. |
| 2. Supply.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActClassSupply |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | SPLY |
| Fixed Value | SPLY |
| 3. Supply.moodCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 4. Supply.realmCode | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 5. Supply.typeId | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 6. Supply.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 7. Supply.id | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 8. Supply.code | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from v3 Code System ActCode; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| 9. Supply.text | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 10. Supply.statusCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ActStatus |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 11. Supply.effectiveTime | |
| Control | 0..* |
| Type | Choice of: http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS |
| Default Type | http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 12. Supply.priorityCode | |
| Control | 0..* |
| Binding | The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 13. Supply.repeatNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-INT |
| 14. Supply.independentInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 15. Supply.quantity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/PQ |
| 16. Supply.expectedUseTime | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
| 17. Supply.product | |
| Control | 0..1 |
| Type | Element |
| 18. Supply.product.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationTargetDirect |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | PRD |
| Fixed Value | PRD |
| 19. Supply.product.manufacturedProduct | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct |
| 20. Supply.subject | |
| Control | 0..1 |
| Type | Element |
| 21. Supply.subject.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationTargetSubject |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | SBJ |
| Fixed Value | SBJ |
| 22. Supply.subject.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 23. Supply.subject.awarenessCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 24. Supply.subject.relatedSubject | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject |
| 25. Supply.specimen | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Specimen |
| 26. Supply.performer | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
| 27. Supply.author | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Author |
| 28. Supply.informant | |
| Control | 0..* |
| Type | Element |
| 29. Supply.informant.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationInformationGenerator |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | INF |
| Fixed Value | INF |
| 30. Supply.informant.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 31. Supply.informant.assignedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity |
| 32. Supply.informant.relatedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity |
| 33. Supply.participant | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
| 34. Supply.entryRelationship | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element sup-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) |
| 35. Supply.entryRelationship.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 36. Supply.entryRelationship.inversionInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 37. Supply.entryRelationship.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 38. Supply.entryRelationship.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
| 39. Supply.entryRelationship.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 40. Supply.entryRelationship.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 41. Supply.entryRelationship.observation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
| 42. Supply.entryRelationship.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 43. Supply.entryRelationship.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 44. Supply.entryRelationship.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 45. Supply.entryRelationship.supply | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 46. Supply.entryRelationship.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 47. Supply.entryRelationship.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 48. Supply.entryRelationship.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 49. Supply.entryRelationship.act | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
| 50. Supply.reference | |
| Control | 0..* |
| Type | Element |
| 51. Supply.reference.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 52. Supply.reference.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 53. Supply.reference.externalAct | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalAct |
| 54. Supply.reference.externalObservation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation |
| 55. Supply.reference.externalProcedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure |
| 56. Supply.reference.externalDocument | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument |
| 57. Supply.precondition | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Precondition |
Guidance on how to interpret the contents of this table can be found here.
| 1. Supply | |
| Definition | Base definition for all types defined in FHIR type system. |
| Control | 10..1* |
| XML Representation | In the XML format, this property has the namespace urn:hl7-org:v3. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 2. Supply.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActClassSupply |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | SPLY |
| Fixed Value | SPLY |
| 3. Supply.moodCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 4. Supply.realmCode | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 5. Supply.typeId | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 6. Supply.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 7. Supply.id | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 8. Supply.code | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from v3 Code System ActCode; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| 9. Supply.text | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 10. Supply.statusCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ActStatus |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 11. Supply.effectiveTime | |
| Control | 0..* |
| Type | Choice of: http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS |
| Default Type | http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 12. Supply.priorityCode | |
| Control | 0..* |
| Binding | The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 13. Supply.repeatNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-INT |
| 14. Supply.independentInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 15. Supply.quantity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/PQ |
| 16. Supply.expectedUseTime | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
| 17. Supply.product | |
| Control | 0..1 |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 18. Supply.product.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationTargetDirect |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | PRD |
| Fixed Value | PRD |
| 19. Supply.product.manufacturedProduct | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct |
| 20. Supply.subject | |
| Control | 0..1 |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 21. Supply.subject.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationTargetSubject |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | SBJ |
| Fixed Value | SBJ |
| 22. Supply.subject.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 23. Supply.subject.awarenessCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 24. Supply.subject.relatedSubject | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject |
| 25. Supply.specimen | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Specimen |
| 26. Supply.performer | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
| 27. Supply.author | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Author |
| 28. Supply.informant | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 29. Supply.informant.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationInformationGenerator |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | INF |
| Fixed Value | INF |
| 30. Supply.informant.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 31. Supply.informant.assignedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity |
| 32. Supply.informant.relatedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity |
| 33. Supply.participant | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
| 34. Supply.entryRelationship | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) sup-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) |
| 35. Supply.entryRelationship.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 36. Supply.entryRelationship.inversionInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 37. Supply.entryRelationship.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 38. Supply.entryRelationship.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
| 39. Supply.entryRelationship.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 40. Supply.entryRelationship.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 41. Supply.entryRelationship.observation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
| 42. Supply.entryRelationship.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 43. Supply.entryRelationship.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 44. Supply.entryRelationship.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 45. Supply.entryRelationship.supply | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 46. Supply.entryRelationship.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 47. Supply.entryRelationship.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 48. Supply.entryRelationship.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 49. Supply.entryRelationship.act | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
| 50. Supply.reference | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 51. Supply.reference.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 52. Supply.reference.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 53. Supply.reference.externalAct | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalAct |
| 54. Supply.reference.externalObservation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation |
| 55. Supply.reference.externalProcedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure |
| 56. Supply.reference.externalDocument | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument |
| 57. Supply.precondition | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Precondition |
Guidance on how to interpret the contents of this table can be found here.
| 1. Supply | |
| Definition | Base definition for all types defined in FHIR type system. |
| Control | 1..1 |
| XML Representation | In the XML format, this property has the namespace urn:hl7-org:v3. |
| 2. Supply.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActClassSupply |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | SPLY |
| Fixed Value | SPLY |
| 3. Supply.moodCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 4. Supply.realmCode | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 5. Supply.typeId | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 6. Supply.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 7. Supply.id | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 8. Supply.code | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from v3 Code System ActCode; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| 9. Supply.text | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 10. Supply.statusCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ActStatus |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 11. Supply.effectiveTime | |
| Control | 0..* |
| Type | Choice of: http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS |
| Default Type | http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 12. Supply.priorityCode | |
| Control | 0..* |
| Binding | The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 13. Supply.repeatNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-INT |
| 14. Supply.independentInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 15. Supply.quantity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/PQ |
| 16. Supply.expectedUseTime | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
| 17. Supply.product | |
| Control | 0..1 |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 18. Supply.product.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 19. Supply.product.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Supply.product.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 20. Supply.product.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationTargetDirect |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | PRD |
| Fixed Value | PRD |
| 21. Supply.product.manufacturedProduct | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct |
| 22. Supply.subject | |
| Control | 0..1 |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 23. Supply.subject.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 24. Supply.subject.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Supply.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 25. Supply.subject.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationTargetSubject |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | SBJ |
| Fixed Value | SBJ |
| 26. Supply.subject.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 27. Supply.subject.awarenessCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 28. Supply.subject.relatedSubject | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject |
| 29. Supply.specimen | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Specimen |
| 30. Supply.performer | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
| 31. Supply.author | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Author |
| 32. Supply.informant | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 33. Supply.informant.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 34. Supply.informant.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Supply.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 35. Supply.informant.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationInformationGenerator |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | INF |
| Fixed Value | INF |
| 36. Supply.informant.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 37. Supply.informant.assignedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity |
| 38. Supply.informant.relatedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity |
| 39. Supply.participant | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
| 40. Supply.entryRelationship | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) sup-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) |
| 41. Supply.entryRelationship.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 42. Supply.entryRelationship.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Supply.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 43. Supply.entryRelationship.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 44. Supply.entryRelationship.inversionInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 45. Supply.entryRelationship.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 46. Supply.entryRelationship.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
| 47. Supply.entryRelationship.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 48. Supply.entryRelationship.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 49. Supply.entryRelationship.observation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
| 50. Supply.entryRelationship.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 51. Supply.entryRelationship.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 52. Supply.entryRelationship.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 53. Supply.entryRelationship.supply | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 54. Supply.entryRelationship.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 55. Supply.entryRelationship.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 56. Supply.entryRelationship.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 57. Supply.entryRelationship.act | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
| 58. Supply.reference | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 59. Supply.reference.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 60. Supply.reference.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Supply.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 61. Supply.reference.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 62. Supply.reference.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 63. Supply.reference.externalAct | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalAct |
| 64. Supply.reference.externalObservation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation |
| 65. Supply.reference.externalProcedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure |
| 66. Supply.reference.externalDocument | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument |
| 67. Supply.precondition | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Precondition |
IG © 2019+ Health Level 7. Package hl7.cda.uv.core#2.1.0-draft1 based on FHIR 5.0.0-snapshot3. Generated 2023-01-16
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change