Clinical Document Architecture V2.0.1
2.1.0-draft1 - 1st Draft

This page is part of the CDA: Clinical Document Architecture (v2.1.0-draft1: CDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions

Logical Model: CDAR2.RegionOfInterest - Detailed Descriptions

Active as of 2023-01-16

Definitions for the RegionOfInterest logical model.

Guidance on how to interpret the contents of this table can be found here.

1. RegionOfInterest
Control1..1
XML RepresentationIn the XML format, this property has the namespace urn:hl7-org:v3.
2. RegionOfInterest.ID
Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
3. RegionOfInterest.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassROI
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueROIOVL
Fixed ValueROIOVL
4. RegionOfInterest.moodCode
Control1..1
BindingThe codes SHALL be taken from ActMood
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueEVN
Fixed ValueEVN
5. RegionOfInterest.realmCode
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
6. RegionOfInterest.typeId
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
7. RegionOfInterest.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
8. RegionOfInterest.id
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
9. RegionOfInterest.code
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
10. RegionOfInterest.value
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
11. RegionOfInterest.subject
Control0..1
TypeElement
12. RegionOfInterest.subject.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetSubject
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueSBJ
Fixed ValueSBJ
13. RegionOfInterest.subject.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
14. RegionOfInterest.subject.awarenessCode
Control0..1
BindingThe codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
15. RegionOfInterest.subject.relatedSubject
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
16. RegionOfInterest.specimen
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Specimen
17. RegionOfInterest.performer
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Performer2
18. RegionOfInterest.author
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author
19. RegionOfInterest.informant
Control0..*
TypeElement
20. RegionOfInterest.informant.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationInformationGenerator
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueINF
Fixed ValueINF
21. RegionOfInterest.informant.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
22. RegionOfInterest.informant.assignedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
23. RegionOfInterest.informant.relatedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
24. RegionOfInterest.participant
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Participant2
25. RegionOfInterest.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
roi-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
26. RegionOfInterest.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
27. RegionOfInterest.entryRelationship.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
28. RegionOfInterest.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
29. RegionOfInterest.entryRelationship.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
30. RegionOfInterest.entryRelationship.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
31. RegionOfInterest.entryRelationship.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
32. RegionOfInterest.entryRelationship.observation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
33. RegionOfInterest.entryRelationship.regionOfInterest
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
34. RegionOfInterest.entryRelationship.observationMedia
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
35. RegionOfInterest.entryRelationship.substanceAdministration
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
36. RegionOfInterest.entryRelationship.supply
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
37. RegionOfInterest.entryRelationship.procedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
38. RegionOfInterest.entryRelationship.encounter
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
39. RegionOfInterest.entryRelationship.organizer
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
40. RegionOfInterest.entryRelationship.act
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
41. RegionOfInterest.reference
Control0..*
TypeElement
42. RegionOfInterest.reference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
43. RegionOfInterest.reference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
44. RegionOfInterest.reference.externalAct
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalAct
45. RegionOfInterest.reference.externalObservation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
46. RegionOfInterest.reference.externalProcedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
47. RegionOfInterest.reference.externalDocument
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument
48. RegionOfInterest.precondition
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Precondition

Guidance on how to interpret the contents of this table can be found here.

1. RegionOfInterest
Definition

Base definition for all types defined in FHIR type system.

Control10..1*
XML RepresentationIn the XML format, this property has the namespace urn:hl7-org:v3.
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
2. RegionOfInterest.ID
Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
3. RegionOfInterest.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassROI
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueROIOVL
Fixed ValueROIOVL
4. RegionOfInterest.moodCode
Control1..1
BindingThe codes SHALL be taken from ActMood
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueEVN
Fixed ValueEVN
5. RegionOfInterest.realmCode
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
6. RegionOfInterest.typeId
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
7. RegionOfInterest.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
8. RegionOfInterest.id
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
9. RegionOfInterest.code
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
10. RegionOfInterest.value
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
11. RegionOfInterest.subject
Control0..1
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. RegionOfInterest.subject.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetSubject
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueSBJ
Fixed ValueSBJ
13. RegionOfInterest.subject.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
14. RegionOfInterest.subject.awarenessCode
Control0..1
BindingThe codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
15. RegionOfInterest.subject.relatedSubject
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
16. RegionOfInterest.specimen
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Specimen
17. RegionOfInterest.performer
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Performer2
18. RegionOfInterest.author
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author
19. RegionOfInterest.informant
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. RegionOfInterest.informant.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationInformationGenerator
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueINF
Fixed ValueINF
21. RegionOfInterest.informant.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
22. RegionOfInterest.informant.assignedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
23. RegionOfInterest.informant.relatedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
24. RegionOfInterest.participant
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Participant2
25. RegionOfInterest.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
roi-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
26. RegionOfInterest.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
27. RegionOfInterest.entryRelationship.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
28. RegionOfInterest.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
29. RegionOfInterest.entryRelationship.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
30. RegionOfInterest.entryRelationship.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
31. RegionOfInterest.entryRelationship.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
32. RegionOfInterest.entryRelationship.observation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
33. RegionOfInterest.entryRelationship.regionOfInterest
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
34. RegionOfInterest.entryRelationship.observationMedia
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
35. RegionOfInterest.entryRelationship.substanceAdministration
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
36. RegionOfInterest.entryRelationship.supply
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
37. RegionOfInterest.entryRelationship.procedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
38. RegionOfInterest.entryRelationship.encounter
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
39. RegionOfInterest.entryRelationship.organizer
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
40. RegionOfInterest.entryRelationship.act
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
41. RegionOfInterest.reference
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. RegionOfInterest.reference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
43. RegionOfInterest.reference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
44. RegionOfInterest.reference.externalAct
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalAct
45. RegionOfInterest.reference.externalObservation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
46. RegionOfInterest.reference.externalProcedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
47. RegionOfInterest.reference.externalDocument
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument
48. RegionOfInterest.precondition
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Precondition

Guidance on how to interpret the contents of this table can be found here.

1. RegionOfInterest
Definition

Base definition for all types defined in FHIR type system.

Control1..1
XML RepresentationIn the XML format, this property has the namespace urn:hl7-org:v3.
2. RegionOfInterest.ID
Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
3. RegionOfInterest.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassROI
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueROIOVL
Fixed ValueROIOVL
4. RegionOfInterest.moodCode
Control1..1
BindingThe codes SHALL be taken from ActMood
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueEVN
Fixed ValueEVN
5. RegionOfInterest.realmCode
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
6. RegionOfInterest.typeId
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
7. RegionOfInterest.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
8. RegionOfInterest.id
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
9. RegionOfInterest.code
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
10. RegionOfInterest.value
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
11. RegionOfInterest.subject
Control0..1
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. RegionOfInterest.subject.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
13. RegionOfInterest.subject.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RegionOfInterest.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
14. RegionOfInterest.subject.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetSubject
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueSBJ
Fixed ValueSBJ
15. RegionOfInterest.subject.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
16. RegionOfInterest.subject.awarenessCode
Control0..1
BindingThe codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
17. RegionOfInterest.subject.relatedSubject
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
18. RegionOfInterest.specimen
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Specimen
19. RegionOfInterest.performer
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Performer2
20. RegionOfInterest.author
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author
21. RegionOfInterest.informant
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. RegionOfInterest.informant.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
23. RegionOfInterest.informant.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RegionOfInterest.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
24. RegionOfInterest.informant.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationInformationGenerator
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueINF
Fixed ValueINF
25. RegionOfInterest.informant.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
26. RegionOfInterest.informant.assignedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
27. RegionOfInterest.informant.relatedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
28. RegionOfInterest.participant
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Participant2
29. RegionOfInterest.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
roi-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
30. RegionOfInterest.entryRelationship.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
31. RegionOfInterest.entryRelationship.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RegionOfInterest.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. RegionOfInterest.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
33. RegionOfInterest.entryRelationship.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
34. RegionOfInterest.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
35. RegionOfInterest.entryRelationship.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
36. RegionOfInterest.entryRelationship.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
37. RegionOfInterest.entryRelationship.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
38. RegionOfInterest.entryRelationship.observation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
39. RegionOfInterest.entryRelationship.regionOfInterest
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
40. RegionOfInterest.entryRelationship.observationMedia
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
41. RegionOfInterest.entryRelationship.substanceAdministration
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
42. RegionOfInterest.entryRelationship.supply
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
43. RegionOfInterest.entryRelationship.procedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
44. RegionOfInterest.entryRelationship.encounter
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
45. RegionOfInterest.entryRelationship.organizer
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
46. RegionOfInterest.entryRelationship.act
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
47. RegionOfInterest.reference
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. RegionOfInterest.reference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
49. RegionOfInterest.reference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RegionOfInterest.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
50. RegionOfInterest.reference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
51. RegionOfInterest.reference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
52. RegionOfInterest.reference.externalAct
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalAct
53. RegionOfInterest.reference.externalObservation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
54. RegionOfInterest.reference.externalProcedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
55. RegionOfInterest.reference.externalDocument
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument
56. RegionOfInterest.precondition
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Precondition