Clinical Document Architecture
2.0.0-sd-ballot - ballot
Clinical Document Architecture
2.0.0-sd-ballot - ballot
This page is part of the CDA: Clinical Document Architecture (v2.0.0-sd-ballot: CDA 2.0 Ballot 1) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions
| Active as of 2023-10-27 |
Definitions for the IVL-INT logical model.
Guidance on how to interpret the contents of this table can be found here
| 0. IVL_INT | |
| Definition | Interval of integers |
| Control | 1..* |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| Invariants | ivl-int-center: Center cannot co-exist with low or high (center.empty() or (low.empty() and high.empty())) |
| 2. IVL_INT.value | |
| Control | 0..1 |
| Type | integer(int: Integer Number) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 4. IVL_INT.operator | |
| Definition | A code specifying whether the set component is included (union) or excluded (set-difference) from the set, or other set operations with the current set component and the set as constructed from the representation stream up to the current point. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from SetOperator |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | I |
| 6. IVL_INT.low | |
| Definition | This is the low limit of the interval. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-INT |
| Label | Low Boundary |
| 8. IVL_INT.center | |
| Definition | The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| Label | Central Value |
| 10. IVL_INT.width | |
| Definition | The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| Label | Width |
| 12. IVL_INT.high | |
| Definition | This is the high limit of the interval. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-INT |
| Label | High Boundary |
Guidance on how to interpret the contents of this table can be found here
| 0. IVL_INT | |
| Definition | Interval of integers Base definition for all types defined in FHIR type system. |
| Short | Base for all types and resources |
| Control | 10..* |
| Is Modifier | false |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| Invariants | ivl-int-center: Center cannot co-exist with low or high (center.empty() or (low.empty() and high.empty())) |
| 2. IVL_INT.value | |
| Control | 0..1 |
| Type | integer(int: Integer Number) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 4. IVL_INT.operator | |
| Definition | A code specifying whether the set component is included (union) or excluded (set-difference) from the set, or other set operations with the current set component and the set as constructed from the representation stream up to the current point. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from SetOperator |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | I |
| 6. IVL_INT.low | |
| Definition | This is the low limit of the interval. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-INT |
| Label | Low Boundary |
| 8. IVL_INT.center | |
| Definition | The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| Label | Central Value |
| 10. IVL_INT.width | |
| Definition | The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| Label | Width |
| 12. IVL_INT.high | |
| Definition | This is the high limit of the interval. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-INT |
| Label | High Boundary |
Guidance on how to interpret the contents of this table can be found here
| 0. IVL_INT | |
| Definition | Interval of integers |
| Short | Base for all types and resources |
| Control | 1..* |
| Is Modifier | false |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| Invariants | ivl-int-center: Center cannot co-exist with low or high (center.empty() or (low.empty() and high.empty())) |
| 2. IVL_INT.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 4. IVL_INT.value | |
| Control | 0..1 |
| Type | integer(int: Integer Number) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 6. IVL_INT.operator | |
| Definition | A code specifying whether the set component is included (union) or excluded (set-difference) from the set, or other set operations with the current set component and the set as constructed from the representation stream up to the current point. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from SetOperator |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | I |
| 8. IVL_INT.low | |
| Definition | This is the low limit of the interval. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-INT |
| Label | Low Boundary |
| 10. IVL_INT.center | |
| Definition | The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| Label | Central Value |
| 12. IVL_INT.width | |
| Definition | The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| Label | Width |
| 14. IVL_INT.high | |
| Definition | This is the high limit of the interval. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-INT |
| Label | High Boundary |
IG © 2019+ Health Level 7. Package hl7.cda.uv.core#2.0.0-sd-ballot based on FHIR 5.0.0. Generated 2023-10-27
Links: Table of Contents |
QA Report
| Version History 
|
|
Propose a change