HL7.CDA.US.CCDA\Immunization Activity - Definitions

This page is part of the CCDA: Consolidated CDA Release (v2.1.0-draft1: CCDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions

Resource Profile: ImmunizationActivity - Detailed Descriptions

Active as of 2023-01-16

Definitions for the 2.16.840.1.113883.10.20.22.4.52 resource profile.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here.

1. SubstanceAdministration
2. SubstanceAdministration.classCode
Requirements	SHALL contain exactly one [1..1] @classCode="SBADM" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1198-8826).
3. SubstanceAdministration.moodCode
Binding	The codes SHALL be taken from MoodCodeEvnIntFor codes, see (unbound)
Requirements	SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet MoodCodeEvnInt urn:oid:2.16.840.1.113883.11.20.9.18 STATIC (CONF:1198-8827).
4. SubstanceAdministration.templateId
Slicing	This element introduces a set of slices on SubstanceAdministration.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ root value @ root,
5. SubstanceAdministration.templateId:primary
SliceName	primary
Control	1..1
Requirements	SHALL contain exactly one [1..1] templateId (CONF:1198-8828) such that it
6. SubstanceAdministration.templateId:primary.root
Control	1..1
Requirements	SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.52" (CONF:1198-10498).
Pattern Value	2.16.840.1.113883.10.20.22.4.52
7. SubstanceAdministration.templateId:primary.extension
Control	1..1
Requirements	SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32528).
Pattern Value	2015-08-01
8. SubstanceAdministration.id
Control	10..*
Requirements	SHALL contain at least one [1..*] id (CONF:1198-8829).
9. SubstanceAdministration.code
Requirements	MAY contain zero or one [0..1] code (CONF:1198-8830).
10. SubstanceAdministration.negationInd
Control	10..1
Requirements	SHALL contain exactly one [1..1] @negationInd (CONF:1198-8985).
11. SubstanceAdministration.statusCode
Control	10..1
Requirements	SHALL contain exactly one [1..1] statusCode (CONF:1198-8833).
12. SubstanceAdministration.statusCode.code
Control	1..1
Binding	The codes SHALL be taken from ActStatus
Requirements	This statusCode SHALL contain exactly one [1..1] @code, which SHALL be selected from ValueSet ActStatus urn:oid:2.16.840.1.113883.1.11.15933 DYNAMIC (CONF:1198-32359).
13. SubstanceAdministration.effectiveTime
Control	10..1*
Requirements	SHALL contain exactly one [1..1] effectiveTime (CONF:1198-8834).
14. SubstanceAdministration.repeatNumber
Requirements	MAY contain zero or one [0..1] repeatNumber (CONF:1198-8838).
15. SubstanceAdministration.routeCode
Binding	The codes SHALL be taken from SPL Drug Route of Administration TerminologyThe codes SHALL be taken from RouteOfAdministration; other codes may be used where these codes are not suitable
Requirements	MAY contain zero or one [0..1] routeCode, which SHALL be selected from ValueSet SPL Drug Route of Administration Terminology urn:oid:2.16.840.1.113883.3.88.12.3221.8.7 DYNAMIC (CONF:1198-8839).
16. SubstanceAdministration.routeCode.translation
Control	0..*
Binding	The codes SHALL be taken from Medication Route
Requirements	The routeCode, if present, SHOULD contain zero or more [0..*] translation, which SHALL be selected from ValueSet Medication Route urn:oid:2.16.840.1.113762.1.4.1099.12 DYNAMIC (CONF:1198-32960).
17. SubstanceAdministration.approachSiteCode
Control	0..1*
Binding	The codes SHALL be taken from Body Site Value SetThe codes SHALL be taken from http://terminology.hl7.org/ValueSet/v3-ActSite; other codes may be used where these codes are not suitable
Requirements	MAY contain zero or one [0..1] approachSiteCode, where the code SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1198-8840).
18. SubstanceAdministration.doseQuantity
Requirements	SHOULD contain zero or one [0..1] doseQuantity (CONF:1198-8841).
19. SubstanceAdministration.doseQuantity.unit
Control	0..1
Binding	The codes SHALL be taken from UnitsOfMeasureCaseSensitive
Requirements	The doseQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1198-8842).
20. SubstanceAdministration.administrationUnitCode
Binding	The codes SHALL be taken from AdministrationUnitDoseFormThe codes SHALL be taken from AdministrableDrugForm; other codes may be used where these codes are not suitable
Requirements	MAY contain zero or one [0..1] administrationUnitCode, which SHALL be selected from ValueSet AdministrationUnitDoseForm urn:oid:2.16.840.1.113762.1.4.1021.30 DYNAMIC (CONF:1198-8846).
21. SubstanceAdministration.consumable
Requirements	SHALL contain exactly one [1..1] consumable (CONF:1198-8847).
22. SubstanceAdministration.consumable.manufacturedProduct
Type	http://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct(ImmunizationMedicationInformation)
Requirements	This consumable SHALL contain exactly one [1..1] Immunization Medication Information (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.54:2014-06-09) (CONF:1198-15546).
23. SubstanceAdministration.performer
Control	0..1*
Requirements	SHOULD contain zero or one [0..1] performer (CONF:1198-8849).
24. SubstanceAdministration.author
Type	http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements	SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31151).
25. SubstanceAdministration.participant
Slicing	This element introduces a set of slices on SubstanceAdministration.participant. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ typeCode value @ typeCode,
26. SubstanceAdministration.participant:drugVehicle
SliceName	drugVehicle
Control	0..*
Requirements	MAY contain zero or more [0..*] participant (CONF:1198-8850) such that it
27. SubstanceAdministration.participant:drugVehicle.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="CSM" (CodeSystem: HL7ParticipationType urn:oid:2.16.840.1.113883.5.90 STATIC) (CONF:1198-8851).
Pattern Value	CSM
28. SubstanceAdministration.participant:drugVehicle.participantRole
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ParticipantRole(DrugVehicle)
Requirements	SHALL contain exactly one [1..1] Drug Vehicle (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.24) (CONF:1198-15547).
29. SubstanceAdministration.entryRelationship
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators: profile @ act profile @ act, profile @ act,
30. SubstanceAdministration.entryRelationship:indication
SliceName	indication
Control	0..*
Requirements	MAY contain zero or more [0..*] entryRelationship (CONF:1198-8853) such that it
31. SubstanceAdministration.entryRelationship:indication.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="RSON" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8854).
Pattern Value	RSON
32. SubstanceAdministration.entryRelationship:indication.observation
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(Indication)
Requirements	SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1198-15537).
33. SubstanceAdministration.entryRelationship:instruction
SliceName	instruction
Control	0..1
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8856) such that it
34. SubstanceAdministration.entryRelationship:instruction.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="SUBJ" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8857).
Pattern Value	SUBJ
35. SubstanceAdministration.entryRelationship:instruction.inversionInd
Control	1..1
Requirements	SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:1198-8858).
Pattern Value	true
36. SubstanceAdministration.entryRelationship:instruction.act
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Act(Instruction)
Requirements	SHALL contain exactly one [1..1] Instruction (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:1198-31392).
37. SubstanceAdministration.entryRelationship:medSupplyOrder
SliceName	medSupplyOrder
Control	0..1
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8860) such that it
38. SubstanceAdministration.entryRelationship:medSupplyOrder.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8861).
Pattern Value	REFR
39. SubstanceAdministration.entryRelationship:medSupplyOrder.supply
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply(MedicationSupplyOrder)
Requirements	SHALL contain exactly one [1..1] Medication Supply Order (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.17:2014-06-09) (CONF:1198-15539).
40. SubstanceAdministration.entryRelationship:medDispense
SliceName	medDispense
Control	0..1
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8863) such that it
41. SubstanceAdministration.entryRelationship:medDispense.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8864).
Pattern Value	REFR
42. SubstanceAdministration.entryRelationship:medDispense.supply
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply(MedicationDispense)
Requirements	SHALL contain exactly one [1..1] Medication Dispense (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.18:2014-06-09) (CONF:1198-15540).
43. SubstanceAdministration.entryRelationship:reactionObs
SliceName	reactionObs
Control	0..1
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8866) such that it
44. SubstanceAdministration.entryRelationship:reactionObs.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="CAUS" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8867).
Pattern Value	CAUS
45. SubstanceAdministration.entryRelationship:reactionObs.observation
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(ReactionObservation)
Requirements	SHALL contain exactly one [1..1] Reaction Observation (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.9:2014-06-09) (CONF:1198-15541).
46. SubstanceAdministration.entryRelationship:immunizationRefusal
SliceName	immunizationRefusal
Control	0..1
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8988) such that it
47. SubstanceAdministration.entryRelationship:immunizationRefusal.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="RSON" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8989).
Pattern Value	RSON
48. SubstanceAdministration.entryRelationship:immunizationRefusal.observation
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(ImmunizationRefusalReason)
Requirements	SHALL contain exactly one [1..1] Immunization Refusal Reason (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.53) (CONF:1198-15542).
49. SubstanceAdministration.entryRelationship:substanceAdmin
SliceName	substanceAdmin
Control	0..*
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-31510) such that it
50. SubstanceAdministration.entryRelationship:substanceAdmin.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="COMP" Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31511).
Pattern Value	COMP
51. SubstanceAdministration.entryRelationship:substanceAdmin.inversionInd
Control	1..1
Requirements	SHALL contain exactly one [1..1] @inversionInd="true" (CONF:1198-31512).
Pattern Value	true
52. SubstanceAdministration.entryRelationship:substanceAdmin.sequenceNumber
Control	0..1
Requirements	MAY contain zero or one [0..1] sequenceNumber (CONF:1198-31513).
53. SubstanceAdministration.entryRelationship:substanceAdmin.act
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Act(SubstanceAdministeredAct)
Requirements	SHALL contain exactly one [1..1] Substance Administered Act (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.118) (CONF:1198-31514).
54. SubstanceAdministration.precondition
Slicing	This element introduces a set of slices on SubstanceAdministration.precondition. The slices are unordered and Open, and can be differentiated using the following discriminators: profile @ criterion
55. SubstanceAdministration.precondition:substanceAdmin
SliceName	substanceAdmin
Control	0..*
Requirements	MAY contain zero or more [0..*] precondition (CONF:1198-8869) such that it
56. SubstanceAdministration.precondition:substanceAdmin.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="PRCN" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8870).
Pattern Value	PRCN
57. SubstanceAdministration.precondition:substanceAdmin.criterion
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Criterion(PreconditionforSubstanceAdministration)
Requirements	SHALL contain exactly one [1..1] Precondition for Substance Administration (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.25:2014-06-09) (CONF:1198-15548).

Guidance on how to interpret the contents of this table can be found here.

1. SubstanceAdministration
Definition	Base definition for all types defined in FHIR type system.
Control	10..1*
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
2. SubstanceAdministration.classCode
Control	1..1
Binding	The codes SHALL be taken from ActClass
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @classCode="SBADM" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1198-8826).
Default Value	SBADM
Fixed Value	SBADM
3. SubstanceAdministration.moodCode
Control	1..1
Binding	The codes SHALL be taken from MoodCodeEvnInt
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet MoodCodeEvnInt urn:oid:2.16.840.1.113883.11.20.9.18 STATIC (CONF:1198-8827).
4. SubstanceAdministration.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Slicing	This element introduces a set of slices on SubstanceAdministration.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ root value @ root,
5. SubstanceAdministration.templateId:primary
SliceName	primary
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain exactly one [1..1] templateId (CONF:1198-8828) such that it
6. SubstanceAdministration.templateId:primary.root
Definition	A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.52" (CONF:1198-10498).
Pattern Value	2.16.840.1.113883.10.20.22.4.52
7. SubstanceAdministration.templateId:primary.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32528).
Pattern Value	2015-08-01
8. SubstanceAdministration.id
Control	1..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain at least one [1..*] id (CONF:1198-8829).
9. SubstanceAdministration.code
Control	0..1
Binding	The codes SHALL be taken from ActSubstanceAdministrationCode; other codes may be used where these codes are not suitable
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Requirements	MAY contain zero or one [0..1] code (CONF:1198-8830).
10. SubstanceAdministration.negationInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @negationInd (CONF:1198-8985).
11. SubstanceAdministration.statusCode
Control	1..1
Binding	The codes SHALL be taken from ActStatus
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
Requirements	SHALL contain exactly one [1..1] statusCode (CONF:1198-8833).
12. SubstanceAdministration.statusCode.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Binding	The codes SHALL be taken from ActStatus
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This statusCode SHALL contain exactly one [1..1] @code, which SHALL be selected from ValueSet ActStatus urn:oid:2.16.840.1.113883.1.11.15933 DYNAMIC (CONF:1198-32359).
13. SubstanceAdministration.statusCode.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
14. SubstanceAdministration.statusCode.codeSystemName
Definition	The common name of the coding system.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
15. SubstanceAdministration.statusCode.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
16. SubstanceAdministration.statusCode.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
17. SubstanceAdministration.statusCode.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
18. SubstanceAdministration.statusCode.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
19. SubstanceAdministration.statusCode.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
20. SubstanceAdministration.effectiveTime
Control	1..1
Type	Choice of: http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS
Default Type	http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	SHALL contain exactly one [1..1] effectiveTime (CONF:1198-8834).
21. SubstanceAdministration.repeatNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-INT
Requirements	MAY contain zero or one [0..1] repeatNumber (CONF:1198-8838).
22. SubstanceAdministration.routeCode
Control	0..1
Binding	The codes SHALL be taken from SPL Drug Route of Administration Terminology
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
Requirements	MAY contain zero or one [0..1] routeCode, which SHALL be selected from ValueSet SPL Drug Route of Administration Terminology urn:oid:2.16.840.1.113883.3.88.12.3221.8.7 DYNAMIC (CONF:1198-8839).
23. SubstanceAdministration.routeCode.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
24. SubstanceAdministration.routeCode.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Binding	The codes SHALL be taken from Medication Route
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	The routeCode, if present, SHOULD contain zero or more [0..*] translation, which SHALL be selected from ValueSet Medication Route urn:oid:2.16.840.1.113762.1.4.1099.12 DYNAMIC (CONF:1198-32960).
25. SubstanceAdministration.approachSiteCode
Control	0..1
Binding	The codes SHALL be taken from Body Site Value Set
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Requirements	MAY contain zero or one [0..1] approachSiteCode, where the code SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1198-8840).
26. SubstanceAdministration.doseQuantity
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-PQ
Requirements	SHOULD contain zero or one [0..1] doseQuantity (CONF:1198-8841).
27. SubstanceAdministration.doseQuantity.unit
Definition	The unit of measure specified in the Unified Code for Units of Measure (UCUM) [].
Control	0..1
Binding	The codes SHALL be taken from UnitsOfMeasureCaseSensitive
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	The doseQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1198-8842).
28. SubstanceAdministration.administrationUnitCode
Control	0..1
Binding	The codes SHALL be taken from AdministrationUnitDoseForm
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
Requirements	MAY contain zero or one [0..1] administrationUnitCode, which SHALL be selected from ValueSet AdministrationUnitDoseForm urn:oid:2.16.840.1.113762.1.4.1021.30 DYNAMIC (CONF:1198-8846).
29. SubstanceAdministration.consumable
Control	1..1
Type	Element
Requirements	SHALL contain exactly one [1..1] consumable (CONF:1198-8847).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. SubstanceAdministration.consumable.typeCode
Control	1..1
Binding	The codes SHALL be taken from ParticipationTargetDirect
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	CSM
Fixed Value	CSM
31. SubstanceAdministration.consumable.manufacturedProduct
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct(ImmunizationMedicationInformation)
Requirements	This consumable SHALL contain exactly one [1..1] Immunization Medication Information (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.54:2014-06-09) (CONF:1198-15546).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
32. SubstanceAdministration.performer
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Performer2
Requirements	SHOULD contain zero or one [0..1] performer (CONF:1198-8849).
33. SubstanceAdministration.author
Definition	Base definition for all types defined in FHIR type system.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements	SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31151).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. SubstanceAdministration.participant
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Participant2
Slicing	This element introduces a set of slices on SubstanceAdministration.participant. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ typeCode value @ typeCode,
35. SubstanceAdministration.participant:drugVehicle
SliceName	drugVehicle
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Participant2
Requirements	MAY contain zero or more [0..*] participant (CONF:1198-8850) such that it
36. SubstanceAdministration.participant:drugVehicle.typeCode
Control	1..1
Binding	The codes SHALL be taken from ParticipationType
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="CSM" (CodeSystem: HL7ParticipationType urn:oid:2.16.840.1.113883.5.90 STATIC) (CONF:1198-8851).
Pattern Value	CSM
37. SubstanceAdministration.participant:drugVehicle.participantRole
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ParticipantRole(DrugVehicle)
Requirements	SHALL contain exactly one [1..1] Drug Vehicle (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.24) (CONF:1198-15547).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. SubstanceAdministration.entryRelationship
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators: profile @ act profile @ act, profile @ act,
39. SubstanceAdministration.entryRelationship.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
40. SubstanceAdministration.entryRelationship.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
41. SubstanceAdministration.entryRelationship:indication
SliceName	indication
Control	0..*
Type	Element
Requirements	MAY contain zero or more [0..*] entryRelationship (CONF:1198-8853) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
42. SubstanceAdministration.entryRelationship:indication.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="RSON" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8854).
Pattern Value	RSON
43. SubstanceAdministration.entryRelationship:indication.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
44. SubstanceAdministration.entryRelationship:indication.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(Indication)
Requirements	SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1198-15537).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. SubstanceAdministration.entryRelationship:indication.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
46. SubstanceAdministration.entryRelationship:indication.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
47. SubstanceAdministration.entryRelationship:indication.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
48. SubstanceAdministration.entryRelationship:indication.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
49. SubstanceAdministration.entryRelationship:indication.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
50. SubstanceAdministration.entryRelationship:indication.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
51. SubstanceAdministration.entryRelationship:indication.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
52. SubstanceAdministration.entryRelationship:indication.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
53. SubstanceAdministration.entryRelationship:instruction
SliceName	instruction
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8856) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
54. SubstanceAdministration.entryRelationship:instruction.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="SUBJ" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8857).
Pattern Value	SUBJ
55. SubstanceAdministration.entryRelationship:instruction.inversionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:1198-8858).
Pattern Value	true
56. SubstanceAdministration.entryRelationship:instruction.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
57. SubstanceAdministration.entryRelationship:instruction.observation
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
58. SubstanceAdministration.entryRelationship:instruction.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
59. SubstanceAdministration.entryRelationship:instruction.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
60. SubstanceAdministration.entryRelationship:instruction.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
61. SubstanceAdministration.entryRelationship:instruction.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
62. SubstanceAdministration.entryRelationship:instruction.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
63. SubstanceAdministration.entryRelationship:instruction.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
64. SubstanceAdministration.entryRelationship:instruction.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
65. SubstanceAdministration.entryRelationship:instruction.act
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Act(Instruction)
Requirements	SHALL contain exactly one [1..1] Instruction (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:1198-31392).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
66. SubstanceAdministration.entryRelationship:medSupplyOrder
SliceName	medSupplyOrder
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8860) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
67. SubstanceAdministration.entryRelationship:medSupplyOrder.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8861).
Pattern Value	REFR
68. SubstanceAdministration.entryRelationship:medSupplyOrder.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
69. SubstanceAdministration.entryRelationship:medSupplyOrder.observation
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
70. SubstanceAdministration.entryRelationship:medSupplyOrder.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
71. SubstanceAdministration.entryRelationship:medSupplyOrder.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
72. SubstanceAdministration.entryRelationship:medSupplyOrder.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
73. SubstanceAdministration.entryRelationship:medSupplyOrder.supply
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply(MedicationSupplyOrder)
Requirements	SHALL contain exactly one [1..1] Medication Supply Order (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.17:2014-06-09) (CONF:1198-15539).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
74. SubstanceAdministration.entryRelationship:medSupplyOrder.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
75. SubstanceAdministration.entryRelationship:medSupplyOrder.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
76. SubstanceAdministration.entryRelationship:medSupplyOrder.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
77. SubstanceAdministration.entryRelationship:medSupplyOrder.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
78. SubstanceAdministration.entryRelationship:medDispense
SliceName	medDispense
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8863) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
79. SubstanceAdministration.entryRelationship:medDispense.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8864).
Pattern Value	REFR
80. SubstanceAdministration.entryRelationship:medDispense.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
81. SubstanceAdministration.entryRelationship:medDispense.observation
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
82. SubstanceAdministration.entryRelationship:medDispense.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
83. SubstanceAdministration.entryRelationship:medDispense.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
84. SubstanceAdministration.entryRelationship:medDispense.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
85. SubstanceAdministration.entryRelationship:medDispense.supply
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply(MedicationDispense)
Requirements	SHALL contain exactly one [1..1] Medication Dispense (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.18:2014-06-09) (CONF:1198-15540).
Invariants	Defined on this element 1098-9333: A supply act SHALL contain one product/Medication Information OR one product/Immunization Medication Information template (CONF:1098-9333). (: null) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
86. SubstanceAdministration.entryRelationship:medDispense.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
87. SubstanceAdministration.entryRelationship:medDispense.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
88. SubstanceAdministration.entryRelationship:medDispense.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
89. SubstanceAdministration.entryRelationship:medDispense.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
90. SubstanceAdministration.entryRelationship:reactionObs
SliceName	reactionObs
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8866) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
91. SubstanceAdministration.entryRelationship:reactionObs.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="CAUS" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8867).
Pattern Value	CAUS
92. SubstanceAdministration.entryRelationship:reactionObs.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
93. SubstanceAdministration.entryRelationship:reactionObs.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(ReactionObservation)
Requirements	SHALL contain exactly one [1..1] Reaction Observation (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.9:2014-06-09) (CONF:1198-15541).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
94. SubstanceAdministration.entryRelationship:reactionObs.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
95. SubstanceAdministration.entryRelationship:reactionObs.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
96. SubstanceAdministration.entryRelationship:reactionObs.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
97. SubstanceAdministration.entryRelationship:reactionObs.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
98. SubstanceAdministration.entryRelationship:reactionObs.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
99. SubstanceAdministration.entryRelationship:reactionObs.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
100. SubstanceAdministration.entryRelationship:reactionObs.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
101. SubstanceAdministration.entryRelationship:reactionObs.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
102. SubstanceAdministration.entryRelationship:immunizationRefusal
SliceName	immunizationRefusal
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8988) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
103. SubstanceAdministration.entryRelationship:immunizationRefusal.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="RSON" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8989).
Pattern Value	RSON
104. SubstanceAdministration.entryRelationship:immunizationRefusal.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
105. SubstanceAdministration.entryRelationship:immunizationRefusal.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(ImmunizationRefusalReason)
Requirements	SHALL contain exactly one [1..1] Immunization Refusal Reason (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.53) (CONF:1198-15542).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
106. SubstanceAdministration.entryRelationship:immunizationRefusal.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
107. SubstanceAdministration.entryRelationship:immunizationRefusal.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
108. SubstanceAdministration.entryRelationship:immunizationRefusal.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
109. SubstanceAdministration.entryRelationship:immunizationRefusal.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
110. SubstanceAdministration.entryRelationship:immunizationRefusal.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
111. SubstanceAdministration.entryRelationship:immunizationRefusal.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
112. SubstanceAdministration.entryRelationship:immunizationRefusal.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
113. SubstanceAdministration.entryRelationship:immunizationRefusal.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
114. SubstanceAdministration.entryRelationship:substanceAdmin
SliceName	substanceAdmin
Control	0..*
Type	Element
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-31510) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
115. SubstanceAdministration.entryRelationship:substanceAdmin.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="COMP" Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31511).
Pattern Value	COMP
116. SubstanceAdministration.entryRelationship:substanceAdmin.inversionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @inversionInd="true" (CONF:1198-31512).
Pattern Value	true
117. SubstanceAdministration.entryRelationship:substanceAdmin.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
118. SubstanceAdministration.entryRelationship:substanceAdmin.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
Requirements	MAY contain zero or one [0..1] sequenceNumber (CONF:1198-31513).
119. SubstanceAdministration.entryRelationship:substanceAdmin.observation
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
120. SubstanceAdministration.entryRelationship:substanceAdmin.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
121. SubstanceAdministration.entryRelationship:substanceAdmin.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
122. SubstanceAdministration.entryRelationship:substanceAdmin.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
123. SubstanceAdministration.entryRelationship:substanceAdmin.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
124. SubstanceAdministration.entryRelationship:substanceAdmin.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
125. SubstanceAdministration.entryRelationship:substanceAdmin.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
126. SubstanceAdministration.entryRelationship:substanceAdmin.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
127. SubstanceAdministration.entryRelationship:substanceAdmin.act
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Act(SubstanceAdministeredAct)
Requirements	SHALL contain exactly one [1..1] Substance Administered Act (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.118) (CONF:1198-31514).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
128. SubstanceAdministration.precondition
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Precondition
Slicing	This element introduces a set of slices on SubstanceAdministration.precondition. The slices are unordered and Open, and can be differentiated using the following discriminators: profile @ criterion
129. SubstanceAdministration.precondition:substanceAdmin
SliceName	substanceAdmin
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Precondition
Requirements	MAY contain zero or more [0..*] precondition (CONF:1198-8869) such that it
130. SubstanceAdministration.precondition:substanceAdmin.typeCode
Control	1..1
Binding	The codes SHALL be taken from ActRelationshipType
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="PRCN" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8870).
Pattern Value	PRCN
131. SubstanceAdministration.precondition:substanceAdmin.criterion
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Criterion(PreconditionforSubstanceAdministration)
Requirements	SHALL contain exactly one [1..1] Precondition for Substance Administration (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.25:2014-06-09) (CONF:1198-15548).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. SubstanceAdministration
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
2. SubstanceAdministration.classCode
Control	1..1
Binding	The codes SHALL be taken from ActClass
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @classCode="SBADM" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1198-8826).
Default Value	SBADM
Fixed Value	SBADM
3. SubstanceAdministration.moodCode
Control	1..1
Binding	The codes SHALL be taken from MoodCodeEvnInt
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet MoodCodeEvnInt urn:oid:2.16.840.1.113883.11.20.9.18 STATIC (CONF:1198-8827).
4. SubstanceAdministration.realmCode
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
5. SubstanceAdministration.typeId
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
6. SubstanceAdministration.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Slicing	This element introduces a set of slices on SubstanceAdministration.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ root value @ root,
7. SubstanceAdministration.templateId:primary
SliceName	primary
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain exactly one [1..1] templateId (CONF:1198-8828) such that it
8. SubstanceAdministration.templateId:primary.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
9. SubstanceAdministration.templateId:primary.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
10. SubstanceAdministration.templateId:primary.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
11. SubstanceAdministration.templateId:primary.root
Definition	A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.52" (CONF:1198-10498).
Pattern Value	2.16.840.1.113883.10.20.22.4.52
12. SubstanceAdministration.templateId:primary.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32528).
Pattern Value	2015-08-01
13. SubstanceAdministration.id
Control	1..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain at least one [1..*] id (CONF:1198-8829).
14. SubstanceAdministration.code
Control	0..1
Binding	The codes SHALL be taken from ActSubstanceAdministrationCode; other codes may be used where these codes are not suitable
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Requirements	MAY contain zero or one [0..1] code (CONF:1198-8830).
15. SubstanceAdministration.negationInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @negationInd (CONF:1198-8985).
16. SubstanceAdministration.text
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
17. SubstanceAdministration.statusCode
Control	1..1
Binding	The codes SHALL be taken from ActStatus
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
Requirements	SHALL contain exactly one [1..1] statusCode (CONF:1198-8833).
18. SubstanceAdministration.statusCode.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
19. SubstanceAdministration.statusCode.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Binding	The codes SHALL be taken from ActStatus
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This statusCode SHALL contain exactly one [1..1] @code, which SHALL be selected from ValueSet ActStatus urn:oid:2.16.840.1.113883.1.11.15933 DYNAMIC (CONF:1198-32359).
20. SubstanceAdministration.statusCode.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
21. SubstanceAdministration.statusCode.codeSystemName
Definition	The common name of the coding system.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
22. SubstanceAdministration.statusCode.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
23. SubstanceAdministration.statusCode.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
24. SubstanceAdministration.statusCode.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
25. SubstanceAdministration.statusCode.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
26. SubstanceAdministration.statusCode.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
27. SubstanceAdministration.statusCode.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
28. SubstanceAdministration.statusCode.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
29. SubstanceAdministration.effectiveTime
Control	1..1
Type	Choice of: http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS
Default Type	http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	SHALL contain exactly one [1..1] effectiveTime (CONF:1198-8834).
30. SubstanceAdministration.priorityCode
Control	0..1
Binding	The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
31. SubstanceAdministration.repeatNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-INT
Requirements	MAY contain zero or one [0..1] repeatNumber (CONF:1198-8838).
32. SubstanceAdministration.routeCode
Control	0..1
Binding	The codes SHALL be taken from SPL Drug Route of Administration Terminology
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
Requirements	MAY contain zero or one [0..1] routeCode, which SHALL be selected from ValueSet SPL Drug Route of Administration Terminology urn:oid:2.16.840.1.113883.3.88.12.3221.8.7 DYNAMIC (CONF:1198-8839).
33. SubstanceAdministration.routeCode.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
34. SubstanceAdministration.routeCode.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
35. SubstanceAdministration.routeCode.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
36. SubstanceAdministration.routeCode.codeSystemName
Definition	The common name of the coding system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
37. SubstanceAdministration.routeCode.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
38. SubstanceAdministration.routeCode.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
39. SubstanceAdministration.routeCode.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
40. SubstanceAdministration.routeCode.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
41. SubstanceAdministration.routeCode.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
42. SubstanceAdministration.routeCode.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
43. SubstanceAdministration.routeCode.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Binding	The codes SHALL be taken from Medication Route
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	The routeCode, if present, SHOULD contain zero or more [0..*] translation, which SHALL be selected from ValueSet Medication Route urn:oid:2.16.840.1.113762.1.4.1099.12 DYNAMIC (CONF:1198-32960).
44. SubstanceAdministration.approachSiteCode
Control	0..1
Binding	The codes SHALL be taken from Body Site Value Set
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Requirements	MAY contain zero or one [0..1] approachSiteCode, where the code SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1198-8840).
45. SubstanceAdministration.doseQuantity
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-PQ
Requirements	SHOULD contain zero or one [0..1] doseQuantity (CONF:1198-8841).
46. SubstanceAdministration.doseQuantity.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
47. SubstanceAdministration.doseQuantity.unit
Definition	The unit of measure specified in the Unified Code for Units of Measure (UCUM) [].
Control	0..1
Binding	The codes SHALL be taken from UnitsOfMeasureCaseSensitive
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	The doseQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1198-8842).
48. SubstanceAdministration.doseQuantity.value
Definition	The magnitude of the quantity measured in terms of the unit.
Control	0..1
Type	decimal
XML Representation	In the XML format, this property is represented as an attribute.
49. SubstanceAdministration.doseQuantity.low
Definition	This is the low limit of the interval.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/PQ
50. SubstanceAdministration.doseQuantity.high
Definition	This is the high limit of the interval.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/PQ
51. SubstanceAdministration.doseQuantity.width
Definition	The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/PQ
52. SubstanceAdministration.doseQuantity.center
Definition	The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/PQ
53. SubstanceAdministration.rateQuantity
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-PQ
54. SubstanceAdministration.maxDoseQuantity
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/RTO-PQ-PQ
55. SubstanceAdministration.administrationUnitCode
Control	0..1
Binding	The codes SHALL be taken from AdministrationUnitDoseForm
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
Requirements	MAY contain zero or one [0..1] administrationUnitCode, which SHALL be selected from ValueSet AdministrationUnitDoseForm urn:oid:2.16.840.1.113762.1.4.1021.30 DYNAMIC (CONF:1198-8846).
56. SubstanceAdministration.consumable
Control	1..1
Type	Element
Requirements	SHALL contain exactly one [1..1] consumable (CONF:1198-8847).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
57. SubstanceAdministration.consumable.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
58. SubstanceAdministration.consumable.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.consumable.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
59. SubstanceAdministration.consumable.typeCode
Control	1..1
Binding	The codes SHALL be taken from ParticipationTargetDirect
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	CSM
Fixed Value	CSM
60. SubstanceAdministration.consumable.manufacturedProduct
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct(ImmunizationMedicationInformation)
Requirements	This consumable SHALL contain exactly one [1..1] Immunization Medication Information (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.54:2014-06-09) (CONF:1198-15546).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
61. SubstanceAdministration.subject
Control	0..1
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
62. SubstanceAdministration.subject.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
63. SubstanceAdministration.subject.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
64. SubstanceAdministration.subject.typeCode
Control	1..1
Binding	The codes SHALL be taken from ParticipationTargetSubject
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	SBJ
Fixed Value	SBJ
65. SubstanceAdministration.subject.contextControlCode
Control	1..1
Binding	The codes SHALL be taken from ContextControl
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	OP
Fixed Value	OP
66. SubstanceAdministration.subject.awarenessCode
Control	0..1
Binding	The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
67. SubstanceAdministration.subject.relatedSubject
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
68. SubstanceAdministration.specimen
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Specimen
69. SubstanceAdministration.performer
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Performer2
Requirements	SHOULD contain zero or one [0..1] performer (CONF:1198-8849).
70. SubstanceAdministration.author
Definition	Base definition for all types defined in FHIR type system.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements	SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31151).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
71. SubstanceAdministration.informant
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
72. SubstanceAdministration.informant.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
73. SubstanceAdministration.informant.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
74. SubstanceAdministration.informant.typeCode
Control	1..1
Binding	The codes SHALL be taken from ParticipationInformationGenerator
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	INF
Fixed Value	INF
75. SubstanceAdministration.informant.contextControlCode
Control	1..1
Binding	The codes SHALL be taken from ContextControl
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	OP
Fixed Value	OP
76. SubstanceAdministration.informant.assignedEntity
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
77. SubstanceAdministration.informant.relatedEntity
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
78. SubstanceAdministration.participant
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Participant2
Slicing	This element introduces a set of slices on SubstanceAdministration.participant. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ typeCode value @ typeCode,
79. SubstanceAdministration.participant:drugVehicle
SliceName	drugVehicle
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Participant2
Requirements	MAY contain zero or more [0..*] participant (CONF:1198-8850) such that it
80. SubstanceAdministration.participant:drugVehicle.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
81. SubstanceAdministration.participant:drugVehicle.typeCode
Control	1..1
Binding	The codes SHALL be taken from ParticipationType
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="CSM" (CodeSystem: HL7ParticipationType urn:oid:2.16.840.1.113883.5.90 STATIC) (CONF:1198-8851).
Pattern Value	CSM
82. SubstanceAdministration.participant:drugVehicle.contextControlCode
Control	0..1
Binding	The codes SHALL be taken from ContextControl
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Fixed Value	OP
83. SubstanceAdministration.participant:drugVehicle.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
84. SubstanceAdministration.participant:drugVehicle.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
85. SubstanceAdministration.participant:drugVehicle.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
86. SubstanceAdministration.participant:drugVehicle.sdtcFunctionCode
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
XML Representation	In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `functionCode`.
87. SubstanceAdministration.participant:drugVehicle.time
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-TS
88. SubstanceAdministration.participant:drugVehicle.awarenessCode
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
89. SubstanceAdministration.participant:drugVehicle.participantRole
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ParticipantRole(DrugVehicle)
Requirements	SHALL contain exactly one [1..1] Drug Vehicle (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.24) (CONF:1198-15547).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
90. SubstanceAdministration.entryRelationship
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators: profile @ act profile @ act, profile @ act,
91. SubstanceAdministration.entryRelationship.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
92. SubstanceAdministration.entryRelationship.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
93. SubstanceAdministration.entryRelationship.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
94. SubstanceAdministration.entryRelationship.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
95. SubstanceAdministration.entryRelationship.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
96. SubstanceAdministration.entryRelationship.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
97. SubstanceAdministration.entryRelationship.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
98. SubstanceAdministration.entryRelationship.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
99. SubstanceAdministration.entryRelationship.observation
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
100. SubstanceAdministration.entryRelationship.regionOfInterest
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
101. SubstanceAdministration.entryRelationship.observationMedia
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
102. SubstanceAdministration.entryRelationship.substanceAdministration
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
103. SubstanceAdministration.entryRelationship.supply
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
104. SubstanceAdministration.entryRelationship.procedure
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
105. SubstanceAdministration.entryRelationship.encounter
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
106. SubstanceAdministration.entryRelationship.organizer
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
107. SubstanceAdministration.entryRelationship.act
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
108. SubstanceAdministration.entryRelationship:indication
SliceName	indication
Control	0..*
Type	Element
Requirements	MAY contain zero or more [0..*] entryRelationship (CONF:1198-8853) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
109. SubstanceAdministration.entryRelationship:indication.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
110. SubstanceAdministration.entryRelationship:indication.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
111. SubstanceAdministration.entryRelationship:indication.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="RSON" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8854).
Pattern Value	RSON
112. SubstanceAdministration.entryRelationship:indication.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
113. SubstanceAdministration.entryRelationship:indication.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
114. SubstanceAdministration.entryRelationship:indication.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
115. SubstanceAdministration.entryRelationship:indication.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
116. SubstanceAdministration.entryRelationship:indication.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
117. SubstanceAdministration.entryRelationship:indication.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(Indication)
Requirements	SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1198-15537).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
118. SubstanceAdministration.entryRelationship:indication.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
119. SubstanceAdministration.entryRelationship:indication.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
120. SubstanceAdministration.entryRelationship:indication.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
121. SubstanceAdministration.entryRelationship:indication.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
122. SubstanceAdministration.entryRelationship:indication.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
123. SubstanceAdministration.entryRelationship:indication.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
124. SubstanceAdministration.entryRelationship:indication.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
125. SubstanceAdministration.entryRelationship:indication.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
126. SubstanceAdministration.entryRelationship:instruction
SliceName	instruction
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8856) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
127. SubstanceAdministration.entryRelationship:instruction.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
128. SubstanceAdministration.entryRelationship:instruction.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
129. SubstanceAdministration.entryRelationship:instruction.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="SUBJ" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8857).
Pattern Value	SUBJ
130. SubstanceAdministration.entryRelationship:instruction.inversionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:1198-8858).
Pattern Value	true
131. SubstanceAdministration.entryRelationship:instruction.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
132. SubstanceAdministration.entryRelationship:instruction.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
133. SubstanceAdministration.entryRelationship:instruction.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
134. SubstanceAdministration.entryRelationship:instruction.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
135. SubstanceAdministration.entryRelationship:instruction.observation
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
136. SubstanceAdministration.entryRelationship:instruction.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
137. SubstanceAdministration.entryRelationship:instruction.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
138. SubstanceAdministration.entryRelationship:instruction.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
139. SubstanceAdministration.entryRelationship:instruction.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
140. SubstanceAdministration.entryRelationship:instruction.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
141. SubstanceAdministration.entryRelationship:instruction.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
142. SubstanceAdministration.entryRelationship:instruction.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
143. SubstanceAdministration.entryRelationship:instruction.act
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Act(Instruction)
Requirements	SHALL contain exactly one [1..1] Instruction (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:1198-31392).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
144. SubstanceAdministration.entryRelationship:medSupplyOrder
SliceName	medSupplyOrder
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8860) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
145. SubstanceAdministration.entryRelationship:medSupplyOrder.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
146. SubstanceAdministration.entryRelationship:medSupplyOrder.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
147. SubstanceAdministration.entryRelationship:medSupplyOrder.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8861).
Pattern Value	REFR
148. SubstanceAdministration.entryRelationship:medSupplyOrder.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
149. SubstanceAdministration.entryRelationship:medSupplyOrder.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
150. SubstanceAdministration.entryRelationship:medSupplyOrder.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
151. SubstanceAdministration.entryRelationship:medSupplyOrder.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
152. SubstanceAdministration.entryRelationship:medSupplyOrder.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
153. SubstanceAdministration.entryRelationship:medSupplyOrder.observation
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
154. SubstanceAdministration.entryRelationship:medSupplyOrder.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
155. SubstanceAdministration.entryRelationship:medSupplyOrder.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
156. SubstanceAdministration.entryRelationship:medSupplyOrder.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
157. SubstanceAdministration.entryRelationship:medSupplyOrder.supply
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply(MedicationSupplyOrder)
Requirements	SHALL contain exactly one [1..1] Medication Supply Order (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.17:2014-06-09) (CONF:1198-15539).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
158. SubstanceAdministration.entryRelationship:medSupplyOrder.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
159. SubstanceAdministration.entryRelationship:medSupplyOrder.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
160. SubstanceAdministration.entryRelationship:medSupplyOrder.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
161. SubstanceAdministration.entryRelationship:medSupplyOrder.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
162. SubstanceAdministration.entryRelationship:medDispense
SliceName	medDispense
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8863) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
163. SubstanceAdministration.entryRelationship:medDispense.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
164. SubstanceAdministration.entryRelationship:medDispense.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
165. SubstanceAdministration.entryRelationship:medDispense.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8864).
Pattern Value	REFR
166. SubstanceAdministration.entryRelationship:medDispense.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
167. SubstanceAdministration.entryRelationship:medDispense.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
168. SubstanceAdministration.entryRelationship:medDispense.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
169. SubstanceAdministration.entryRelationship:medDispense.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
170. SubstanceAdministration.entryRelationship:medDispense.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
171. SubstanceAdministration.entryRelationship:medDispense.observation
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
172. SubstanceAdministration.entryRelationship:medDispense.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
173. SubstanceAdministration.entryRelationship:medDispense.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
174. SubstanceAdministration.entryRelationship:medDispense.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
175. SubstanceAdministration.entryRelationship:medDispense.supply
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply(MedicationDispense)
Requirements	SHALL contain exactly one [1..1] Medication Dispense (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.18:2014-06-09) (CONF:1198-15540).
Invariants	Defined on this element 1098-9333: A supply act SHALL contain one product/Medication Information OR one product/Immunization Medication Information template (CONF:1098-9333). (: ) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
176. SubstanceAdministration.entryRelationship:medDispense.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
177. SubstanceAdministration.entryRelationship:medDispense.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
178. SubstanceAdministration.entryRelationship:medDispense.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
179. SubstanceAdministration.entryRelationship:medDispense.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
180. SubstanceAdministration.entryRelationship:reactionObs
SliceName	reactionObs
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8866) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
181. SubstanceAdministration.entryRelationship:reactionObs.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
182. SubstanceAdministration.entryRelationship:reactionObs.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
183. SubstanceAdministration.entryRelationship:reactionObs.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="CAUS" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8867).
Pattern Value	CAUS
184. SubstanceAdministration.entryRelationship:reactionObs.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
185. SubstanceAdministration.entryRelationship:reactionObs.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
186. SubstanceAdministration.entryRelationship:reactionObs.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
187. SubstanceAdministration.entryRelationship:reactionObs.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
188. SubstanceAdministration.entryRelationship:reactionObs.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
189. SubstanceAdministration.entryRelationship:reactionObs.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(ReactionObservation)
Requirements	SHALL contain exactly one [1..1] Reaction Observation (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.9:2014-06-09) (CONF:1198-15541).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
190. SubstanceAdministration.entryRelationship:reactionObs.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
191. SubstanceAdministration.entryRelationship:reactionObs.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
192. SubstanceAdministration.entryRelationship:reactionObs.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
193. SubstanceAdministration.entryRelationship:reactionObs.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
194. SubstanceAdministration.entryRelationship:reactionObs.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
195. SubstanceAdministration.entryRelationship:reactionObs.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
196. SubstanceAdministration.entryRelationship:reactionObs.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
197. SubstanceAdministration.entryRelationship:reactionObs.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
198. SubstanceAdministration.entryRelationship:immunizationRefusal
SliceName	immunizationRefusal
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-8988) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
199. SubstanceAdministration.entryRelationship:immunizationRefusal.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
200. SubstanceAdministration.entryRelationship:immunizationRefusal.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
201. SubstanceAdministration.entryRelationship:immunizationRefusal.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="RSON" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8989).
Pattern Value	RSON
202. SubstanceAdministration.entryRelationship:immunizationRefusal.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
203. SubstanceAdministration.entryRelationship:immunizationRefusal.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
204. SubstanceAdministration.entryRelationship:immunizationRefusal.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
205. SubstanceAdministration.entryRelationship:immunizationRefusal.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
206. SubstanceAdministration.entryRelationship:immunizationRefusal.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
207. SubstanceAdministration.entryRelationship:immunizationRefusal.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(ImmunizationRefusalReason)
Requirements	SHALL contain exactly one [1..1] Immunization Refusal Reason (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.53) (CONF:1198-15542).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
208. SubstanceAdministration.entryRelationship:immunizationRefusal.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
209. SubstanceAdministration.entryRelationship:immunizationRefusal.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
210. SubstanceAdministration.entryRelationship:immunizationRefusal.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
211. SubstanceAdministration.entryRelationship:immunizationRefusal.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
212. SubstanceAdministration.entryRelationship:immunizationRefusal.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
213. SubstanceAdministration.entryRelationship:immunizationRefusal.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
214. SubstanceAdministration.entryRelationship:immunizationRefusal.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
215. SubstanceAdministration.entryRelationship:immunizationRefusal.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
216. SubstanceAdministration.entryRelationship:substanceAdmin
SliceName	substanceAdmin
Control	0..*
Type	Element
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-31510) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
217. SubstanceAdministration.entryRelationship:substanceAdmin.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
218. SubstanceAdministration.entryRelationship:substanceAdmin.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
219. SubstanceAdministration.entryRelationship:substanceAdmin.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="COMP" Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31511).
Pattern Value	COMP
220. SubstanceAdministration.entryRelationship:substanceAdmin.inversionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @inversionInd="true" (CONF:1198-31512).
Pattern Value	true
221. SubstanceAdministration.entryRelationship:substanceAdmin.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
222. SubstanceAdministration.entryRelationship:substanceAdmin.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
Requirements	MAY contain zero or one [0..1] sequenceNumber (CONF:1198-31513).
223. SubstanceAdministration.entryRelationship:substanceAdmin.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
224. SubstanceAdministration.entryRelationship:substanceAdmin.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
225. SubstanceAdministration.entryRelationship:substanceAdmin.observation
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation
226. SubstanceAdministration.entryRelationship:substanceAdmin.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
227. SubstanceAdministration.entryRelationship:substanceAdmin.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
228. SubstanceAdministration.entryRelationship:substanceAdmin.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
229. SubstanceAdministration.entryRelationship:substanceAdmin.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
230. SubstanceAdministration.entryRelationship:substanceAdmin.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
231. SubstanceAdministration.entryRelationship:substanceAdmin.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
232. SubstanceAdministration.entryRelationship:substanceAdmin.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
233. SubstanceAdministration.entryRelationship:substanceAdmin.act
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Act(SubstanceAdministeredAct)
Requirements	SHALL contain exactly one [1..1] Substance Administered Act (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.118) (CONF:1198-31514).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
234. SubstanceAdministration.reference
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
235. SubstanceAdministration.reference.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
236. SubstanceAdministration.reference.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on SubstanceAdministration.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
237. SubstanceAdministration.reference.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
238. SubstanceAdministration.reference.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
239. SubstanceAdministration.reference.externalAct
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ExternalAct
240. SubstanceAdministration.reference.externalObservation
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
241. SubstanceAdministration.reference.externalProcedure
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
242. SubstanceAdministration.reference.externalDocument
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument
243. SubstanceAdministration.precondition
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Precondition
Slicing	This element introduces a set of slices on SubstanceAdministration.precondition. The slices are unordered and Open, and can be differentiated using the following discriminators: profile @ criterion
244. SubstanceAdministration.precondition:substanceAdmin
SliceName	substanceAdmin
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Precondition
Requirements	MAY contain zero or more [0..*] precondition (CONF:1198-8869) such that it
245. SubstanceAdministration.precondition:substanceAdmin.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
246. SubstanceAdministration.precondition:substanceAdmin.typeCode
Control	1..1
Binding	The codes SHALL be taken from ActRelationshipType
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="PRCN" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-8870).
Pattern Value	PRCN
247. SubstanceAdministration.precondition:substanceAdmin.realmCode
Definition	When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
248. SubstanceAdministration.precondition:substanceAdmin.typeId
Definition	When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
249. SubstanceAdministration.precondition:substanceAdmin.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
250. SubstanceAdministration.precondition:substanceAdmin.criterion
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Criterion(PreconditionforSubstanceAdministration)
Requirements	SHALL contain exactly one [1..1] Precondition for Substance Administration (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.25:2014-06-09) (CONF:1198-15548).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))