Consolidated CDA Release 2.1 StructureDefinition Prototype Publication
2.1.0-draft1 - CI Build United States of America

This page is part of the CCDA: Consolidated CDA Release (v2.1.0-draft1: CCDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions

Resource Profile: PlannedMedicationActivity - Detailed Descriptions

Active as of 2023-01-16

Definitions for the 2.16.840.1.113883.10.20.22.4.42 resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. SubstanceAdministration
2. SubstanceAdministration.classCode
Requirements

SHALL contain exactly one [1..1] @classCode="SBADM" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1098-8572).

Pattern ValueSBADM
3. SubstanceAdministration.moodCode
BindingThe codes SHALL be taken from Planned moodCode (SubstanceAdministration/Supply)For codes, see (unbound)
Requirements

SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (SubstanceAdministration/Supply) urn:oid:2.16.840.1.113883.11.20.9.24 STATIC 2011-09-30 (CONF:1098-8573).

4. SubstanceAdministration.templateId
SlicingThis element introduces a set of slices on SubstanceAdministration.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ extension
  • value @ extension,
5. SubstanceAdministration.templateId:primary
SliceNameprimary
Control1..1
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1098-30465) such that it

6. SubstanceAdministration.templateId:primary.root
Control1..1
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.42" (CONF:1098-30466).

Pattern Value2.16.840.1.113883.10.20.22.4.42
7. SubstanceAdministration.templateId:primary.extension
Control1..1
Requirements

SHALL contain exactly one [1..1] @extension="2014-06-09" (CONF:1098-32557).

Pattern Value2014-06-09
8. SubstanceAdministration.id
Control10..*
Requirements

SHALL contain at least one [1..*] id (CONF:1098-8575).

9. SubstanceAdministration.statusCode
Control10..1
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1098-32087).

10. SubstanceAdministration.statusCode.code
Control1..1
Requirements

This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-32088).

Pattern Valueactive
11. SubstanceAdministration.effectiveTime
Control10..1*
TypeChoice of: , http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXCM-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS
Requirements

SHALL contain exactly one [1..1] effectiveTime (CONF:1098-30468) such that it

12. SubstanceAdministration.repeatNumber
Requirements

MAY contain zero or one [0..1] repeatNumber (CONF:1098-32066).

13. SubstanceAdministration.routeCode
BindingThe codes SHALL be taken from SPL Drug Route of Administration TerminologyThe codes SHALL be taken from RouteOfAdministration; other codes may be used where these codes are not suitable
Requirements

MAY contain zero or one [0..1] routeCode, which SHALL be selected from ValueSet SPL Drug Route of Administration Terminology urn:oid:2.16.840.1.113883.3.88.12.3221.8.7 DYNAMIC (CONF:1098-32067).

14. SubstanceAdministration.routeCode.translation
Control0..*
BindingThe codes SHALL be taken from Medication Route
Requirements

The routeCode, if present, SHOULD contain zero or more [0..*] translation, which SHALL be selected from ValueSet Medication Route urn:oid:2.16.840.1.113762.1.4.1099.12 DYNAMIC (CONF:1098-32952).

15. SubstanceAdministration.approachSiteCode
BindingThe codes SHALL be taken from Body Site Value SetThe codes SHALL be taken from http://terminology.hl7.org/ValueSet/v3-ActSite; other codes may be used where these codes are not suitable
Requirements

MAY contain zero or more [0..*] approachSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1098-32078).

16. SubstanceAdministration.doseQuantity
Requirements

MAY contain zero or one [0..1] doseQuantity (CONF:1098-32068).

17. SubstanceAdministration.doseQuantity.unit
Control0..1
BindingThe codes SHALL be taken from UnitsOfMeasureCaseSensitive
Requirements

The doseQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1098-32133).

18. SubstanceAdministration.rateQuantity
Requirements

MAY contain zero or one [0..1] rateQuantity (CONF:1098-32079).

19. SubstanceAdministration.rateQuantity.unit
Control0..1
BindingThe codes SHALL be taken from UnitsOfMeasureCaseSensitive
Requirements

The rateQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1098-32134).

20. SubstanceAdministration.maxDoseQuantity
Requirements

MAY contain zero or one [0..1] maxDoseQuantity (CONF:1098-32080).

21. SubstanceAdministration.administrationUnitCode
BindingThe codes SHALL be taken from AdministrationUnitDoseFormThe codes SHALL be taken from AdministrableDrugForm; other codes may be used where these codes are not suitable
Requirements

MAY contain zero or one [0..1] administrationUnitCode, which SHALL be selected from ValueSet AdministrationUnitDoseForm urn:oid:2.16.840.1.113762.1.4.1021.30 DYNAMIC (CONF:1098-32081).

22. SubstanceAdministration.consumable
Requirements

SHALL contain exactly one [1..1] consumable (CONF:1098-32082).

23. SubstanceAdministration.consumable.manufacturedProduct
Typehttp://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct(MedicationInformation)
Requirements

This consumable SHALL contain exactly one [1..1] Medication Information (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.23:2014-06-09) (CONF:1098-32083).

24. SubstanceAdministration.performer
Requirements

MAY contain zero or more [0..*] performer (CONF:1098-30470).

25. SubstanceAdministration.author
Control0..1*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or one [0..1] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-32046).

26. SubstanceAdministration.entryRelationship
SlicingThis element introduces a set of slices on SubstanceAdministration.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ act
  • profile @ act,
27. SubstanceAdministration.entryRelationship:priorityPreference
SliceNamepriorityPreference
Control0..*
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31104) such that it

28. SubstanceAdministration.entryRelationship:priorityPreference.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31105).

Pattern ValueREFR
29. SubstanceAdministration.entryRelationship:priorityPreference.observation
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1098-31106).

30. SubstanceAdministration.entryRelationship:indication
SliceNameindication
Control0..*
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-32069) such that it

31. SubstanceAdministration.entryRelationship:indication.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32070).

Pattern ValueRSON
32. SubstanceAdministration.entryRelationship:indication.observation
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(Indication)
Requirements

SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1098-32071).

33. SubstanceAdministration.entryRelationship:instruction
SliceNameinstruction
Control0..*
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-32072) such that it

34. SubstanceAdministration.entryRelationship:instruction.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32073).

Pattern ValueSUBJ
35. SubstanceAdministration.entryRelationship:instruction.act
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(Instruction)
Requirements

SHALL contain exactly one [1..1] Instruction (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:1098-32074).

36. SubstanceAdministration.precondition
Requirements

MAY contain zero or more [0..*] precondition (CONF:1098-32084).

37. SubstanceAdministration.precondition.typeCode
Control1..1
Requirements

The precondition, if present, SHALL contain exactly one [1..1] @typeCode="PRCN" Precondition (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32085).

Pattern ValuePRCN
38. SubstanceAdministration.precondition.criterion
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Criterion(PreconditionforSubstanceAdministration)
Requirements

The precondition, if present, SHALL contain exactly one [1..1] Precondition for Substance Administration (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.25:2014-06-09) (CONF:1098-32086).

Guidance on how to interpret the contents of this table can be found here.

1. SubstanceAdministration
Definition

Base definition for all types defined in FHIR type system.

Control10..1*
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
2. SubstanceAdministration.classCode
Control1..1
BindingThe codes SHALL be taken from ActClass
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @classCode="SBADM" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1098-8572).

Default ValueSBADM
Fixed ValueSBADM
Pattern ValueSBADM
3. SubstanceAdministration.moodCode
Control1..1
BindingThe codes SHALL be taken from Planned moodCode (SubstanceAdministration/Supply)
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (SubstanceAdministration/Supply) urn:oid:2.16.840.1.113883.11.20.9.24 STATIC 2011-09-30 (CONF:1098-8573).

4. SubstanceAdministration.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
SlicingThis element introduces a set of slices on SubstanceAdministration.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ extension
  • value @ extension,
5. SubstanceAdministration.templateId:primary
SliceNameprimary
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1098-30465) such that it

6. SubstanceAdministration.templateId:primary.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.42" (CONF:1098-30466).

Pattern Value2.16.840.1.113883.10.20.22.4.42
7. SubstanceAdministration.templateId:primary.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @extension="2014-06-09" (CONF:1098-32557).

Pattern Value2014-06-09
8. SubstanceAdministration.id
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain at least one [1..*] id (CONF:1098-8575).

9. SubstanceAdministration.statusCode
Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1098-32087).

10. SubstanceAdministration.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-32088).

Pattern Valueactive
11. SubstanceAdministration.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
12. SubstanceAdministration.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
13. SubstanceAdministration.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
14. SubstanceAdministration.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
15. SubstanceAdministration.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
16. SubstanceAdministration.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
17. SubstanceAdministration.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
18. SubstanceAdministration.effectiveTime
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-TS
Default Typehttp://hl7.org/fhir/cda/StructureDefinition/SXCM-TS
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

SHALL contain exactly one [1..1] effectiveTime (CONF:1098-30468) such that it

19. SubstanceAdministration.repeatNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-INT
Requirements

MAY contain zero or one [0..1] repeatNumber (CONF:1098-32066).

20. SubstanceAdministration.routeCode
Control0..1
BindingThe codes SHALL be taken from SPL Drug Route of Administration Terminology
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
Requirements

MAY contain zero or one [0..1] routeCode, which SHALL be selected from ValueSet SPL Drug Route of Administration Terminology urn:oid:2.16.840.1.113883.3.88.12.3221.8.7 DYNAMIC (CONF:1098-32067).

21. SubstanceAdministration.routeCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
22. SubstanceAdministration.routeCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..*
BindingThe codes SHALL be taken from Medication Route
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

The routeCode, if present, SHOULD contain zero or more [0..*] translation, which SHALL be selected from ValueSet Medication Route urn:oid:2.16.840.1.113762.1.4.1099.12 DYNAMIC (CONF:1098-32952).

23. SubstanceAdministration.approachSiteCode
Control0..*
BindingThe codes SHALL be taken from Body Site Value Set
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
Requirements

MAY contain zero or more [0..*] approachSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1098-32078).

24. SubstanceAdministration.doseQuantity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-PQ
Requirements

MAY contain zero or one [0..1] doseQuantity (CONF:1098-32068).

25. SubstanceAdministration.doseQuantity.unit
Definition

The unit of measure specified in the Unified Code for Units of Measure (UCUM) [].

Control0..1
BindingThe codes SHALL be taken from UnitsOfMeasureCaseSensitive
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

The doseQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1098-32133).

26. SubstanceAdministration.rateQuantity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-PQ
Requirements

MAY contain zero or one [0..1] rateQuantity (CONF:1098-32079).

27. SubstanceAdministration.rateQuantity.unit
Definition

The unit of measure specified in the Unified Code for Units of Measure (UCUM) [].

Control0..1
BindingThe codes SHALL be taken from UnitsOfMeasureCaseSensitive
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

The rateQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1098-32134).

28. SubstanceAdministration.maxDoseQuantity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RTO-PQ-PQ
Requirements

MAY contain zero or one [0..1] maxDoseQuantity (CONF:1098-32080).

29. SubstanceAdministration.administrationUnitCode
Control0..1
BindingThe codes SHALL be taken from AdministrationUnitDoseForm
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
Requirements

MAY contain zero or one [0..1] administrationUnitCode, which SHALL be selected from ValueSet AdministrationUnitDoseForm urn:oid:2.16.840.1.113762.1.4.1021.30 DYNAMIC (CONF:1098-32081).

30. SubstanceAdministration.consumable
Control1..1
TypeElement
Requirements

SHALL contain exactly one [1..1] consumable (CONF:1098-32082).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. SubstanceAdministration.consumable.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetDirect
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueCSM
Fixed ValueCSM
32. SubstanceAdministration.consumable.manufacturedProduct
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct(MedicationInformation)
Requirements

This consumable SHALL contain exactly one [1..1] Medication Information (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.23:2014-06-09) (CONF:1098-32083).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. SubstanceAdministration.performer
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Performer2
Requirements

MAY contain zero or more [0..*] performer (CONF:1098-30470).

34. SubstanceAdministration.author
Definition

Base definition for all types defined in FHIR type system.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or one [0..1] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-32046).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. SubstanceAdministration.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
SlicingThis element introduces a set of slices on SubstanceAdministration.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ act
  • profile @ act,
36. SubstanceAdministration.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
37. SubstanceAdministration.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
38. SubstanceAdministration.entryRelationship:priorityPreference
SliceNamepriorityPreference
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31104) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
39. SubstanceAdministration.entryRelationship:priorityPreference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31105).

Pattern ValueREFR
40. SubstanceAdministration.entryRelationship:priorityPreference.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
41. SubstanceAdministration.entryRelationship:priorityPreference.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1098-31106).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. SubstanceAdministration.entryRelationship:priorityPreference.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
43. SubstanceAdministration.entryRelationship:priorityPreference.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
44. SubstanceAdministration.entryRelationship:priorityPreference.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
45. SubstanceAdministration.entryRelationship:priorityPreference.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
46. SubstanceAdministration.entryRelationship:priorityPreference.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
47. SubstanceAdministration.entryRelationship:priorityPreference.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
48. SubstanceAdministration.entryRelationship:priorityPreference.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
49. SubstanceAdministration.entryRelationship:priorityPreference.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
50. SubstanceAdministration.entryRelationship:indication
SliceNameindication
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-32069) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
51. SubstanceAdministration.entryRelationship:indication.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32070).

Pattern ValueRSON
52. SubstanceAdministration.entryRelationship:indication.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
53. SubstanceAdministration.entryRelationship:indication.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(Indication)
Requirements

SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1098-32071).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
54. SubstanceAdministration.entryRelationship:indication.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
55. SubstanceAdministration.entryRelationship:indication.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
56. SubstanceAdministration.entryRelationship:indication.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
57. SubstanceAdministration.entryRelationship:indication.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
58. SubstanceAdministration.entryRelationship:indication.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
59. SubstanceAdministration.entryRelationship:indication.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
60. SubstanceAdministration.entryRelationship:indication.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
61. SubstanceAdministration.entryRelationship:indication.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
62. SubstanceAdministration.entryRelationship:instruction
SliceNameinstruction
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-32072) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
63. SubstanceAdministration.entryRelationship:instruction.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32073).

Pattern ValueSUBJ
64. SubstanceAdministration.entryRelationship:instruction.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
65. SubstanceAdministration.entryRelationship:instruction.observation
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
66. SubstanceAdministration.entryRelationship:instruction.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
67. SubstanceAdministration.entryRelationship:instruction.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
68. SubstanceAdministration.entryRelationship:instruction.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
69. SubstanceAdministration.entryRelationship:instruction.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
70. SubstanceAdministration.entryRelationship:instruction.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
71. SubstanceAdministration.entryRelationship:instruction.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
72. SubstanceAdministration.entryRelationship:instruction.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
73. SubstanceAdministration.entryRelationship:instruction.act
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(Instruction)
Requirements

SHALL contain exactly one [1..1] Instruction (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:1098-32074).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
74. SubstanceAdministration.precondition
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Precondition
Requirements

MAY contain zero or more [0..*] precondition (CONF:1098-32084).

75. SubstanceAdministration.precondition.typeCode
Control1..1
BindingThe codes SHALL be taken from ActRelationshipType
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

The precondition, if present, SHALL contain exactly one [1..1] @typeCode="PRCN" Precondition (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32085).

Pattern ValuePRCN
76. SubstanceAdministration.precondition.criterion
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Criterion(PreconditionforSubstanceAdministration)
Requirements

The precondition, if present, SHALL contain exactly one [1..1] Precondition for Substance Administration (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.25:2014-06-09) (CONF:1098-32086).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. SubstanceAdministration
Definition

Base definition for all types defined in FHIR type system.

Control1..1
2. SubstanceAdministration.classCode
Control1..1
BindingThe codes SHALL be taken from ActClass
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @classCode="SBADM" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1098-8572).

Default ValueSBADM
Fixed ValueSBADM
Pattern ValueSBADM
3. SubstanceAdministration.moodCode
Control1..1
BindingThe codes SHALL be taken from Planned moodCode (SubstanceAdministration/Supply)
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (SubstanceAdministration/Supply) urn:oid:2.16.840.1.113883.11.20.9.24 STATIC 2011-09-30 (CONF:1098-8573).

4. SubstanceAdministration.realmCode
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
5. SubstanceAdministration.typeId
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
6. SubstanceAdministration.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
SlicingThis element introduces a set of slices on SubstanceAdministration.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ extension
  • value @ extension,
7. SubstanceAdministration.templateId:primary
SliceNameprimary
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1098-30465) such that it

8. SubstanceAdministration.templateId:primary.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
9. SubstanceAdministration.templateId:primary.assigningAuthorityName
Definition

A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
10. SubstanceAdministration.templateId:primary.displayable
Definition

Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
11. SubstanceAdministration.templateId:primary.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.42" (CONF:1098-30466).

Pattern Value2.16.840.1.113883.10.20.22.4.42
12. SubstanceAdministration.templateId:primary.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @extension="2014-06-09" (CONF:1098-32557).

Pattern Value2014-06-09
13. SubstanceAdministration.id
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain at least one [1..*] id (CONF:1098-8575).

14. SubstanceAdministration.code
Control0..1
BindingThe codes SHALL be taken from ActSubstanceAdministrationCode; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
15. SubstanceAdministration.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
16. SubstanceAdministration.text
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
17. SubstanceAdministration.statusCode
Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1098-32087).

18. SubstanceAdministration.statusCode.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
19. SubstanceAdministration.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-32088).

Pattern Valueactive
20. SubstanceAdministration.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
21. SubstanceAdministration.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
22. SubstanceAdministration.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
23. SubstanceAdministration.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
24. SubstanceAdministration.statusCode.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet.
25. SubstanceAdministration.statusCode.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion.
26. SubstanceAdministration.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
27. SubstanceAdministration.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
28. SubstanceAdministration.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
29. SubstanceAdministration.effectiveTime
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-TS
Default Typehttp://hl7.org/fhir/cda/StructureDefinition/SXCM-TS
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

SHALL contain exactly one [1..1] effectiveTime (CONF:1098-30468) such that it

30. SubstanceAdministration.priorityCode
Control0..1
BindingThe codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
31. SubstanceAdministration.repeatNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-INT
Requirements

MAY contain zero or one [0..1] repeatNumber (CONF:1098-32066).

32. SubstanceAdministration.routeCode
Control0..1
BindingThe codes SHALL be taken from SPL Drug Route of Administration Terminology
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
Requirements

MAY contain zero or one [0..1] routeCode, which SHALL be selected from ValueSet SPL Drug Route of Administration Terminology urn:oid:2.16.840.1.113883.3.88.12.3221.8.7 DYNAMIC (CONF:1098-32067).

33. SubstanceAdministration.routeCode.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
34. SubstanceAdministration.routeCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
35. SubstanceAdministration.routeCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
36. SubstanceAdministration.routeCode.codeSystemName
Definition

The common name of the coding system.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
37. SubstanceAdministration.routeCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
38. SubstanceAdministration.routeCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
39. SubstanceAdministration.routeCode.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet.
40. SubstanceAdministration.routeCode.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion.
41. SubstanceAdministration.routeCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
42. SubstanceAdministration.routeCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
43. SubstanceAdministration.routeCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..*
BindingThe codes SHALL be taken from Medication Route
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

The routeCode, if present, SHOULD contain zero or more [0..*] translation, which SHALL be selected from ValueSet Medication Route urn:oid:2.16.840.1.113762.1.4.1099.12 DYNAMIC (CONF:1098-32952).

44. SubstanceAdministration.approachSiteCode
Control0..*
BindingThe codes SHALL be taken from Body Site Value Set
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
Requirements

MAY contain zero or more [0..*] approachSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1098-32078).

45. SubstanceAdministration.doseQuantity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-PQ
Requirements

MAY contain zero or one [0..1] doseQuantity (CONF:1098-32068).

46. SubstanceAdministration.doseQuantity.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
47. SubstanceAdministration.doseQuantity.unit
Definition

The unit of measure specified in the Unified Code for Units of Measure (UCUM) [].

Control0..1
BindingThe codes SHALL be taken from UnitsOfMeasureCaseSensitive
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

The doseQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1098-32133).

48. SubstanceAdministration.doseQuantity.value
Definition

The magnitude of the quantity measured in terms of the unit.

Control0..1
Typedecimal
XML RepresentationIn the XML format, this property is represented as an attribute.
49. SubstanceAdministration.doseQuantity.low
Definition

This is the low limit of the interval.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
50. SubstanceAdministration.doseQuantity.high
Definition

This is the high limit of the interval.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
51. SubstanceAdministration.doseQuantity.width
Definition

The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
52. SubstanceAdministration.doseQuantity.center
Definition

The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
53. SubstanceAdministration.rateQuantity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-PQ
Requirements

MAY contain zero or one [0..1] rateQuantity (CONF:1098-32079).

54. SubstanceAdministration.rateQuantity.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
55. SubstanceAdministration.rateQuantity.unit
Definition

The unit of measure specified in the Unified Code for Units of Measure (UCUM) [].

Control0..1
BindingThe codes SHALL be taken from UnitsOfMeasureCaseSensitive
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

The rateQuantity, if present, SHOULD contain zero or one [0..1] @unit, which SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive urn:oid:2.16.840.1.113883.1.11.12839 DYNAMIC (CONF:1098-32134).

56. SubstanceAdministration.rateQuantity.value
Definition

The magnitude of the quantity measured in terms of the unit.

Control0..1
Typedecimal
XML RepresentationIn the XML format, this property is represented as an attribute.
57. SubstanceAdministration.rateQuantity.low
Definition

This is the low limit of the interval.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
58. SubstanceAdministration.rateQuantity.high
Definition

This is the high limit of the interval.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
59. SubstanceAdministration.rateQuantity.width
Definition

The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
60. SubstanceAdministration.rateQuantity.center
Definition

The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
61. SubstanceAdministration.maxDoseQuantity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RTO-PQ-PQ
Requirements

MAY contain zero or one [0..1] maxDoseQuantity (CONF:1098-32080).

62. SubstanceAdministration.administrationUnitCode
Control0..1
BindingThe codes SHALL be taken from AdministrationUnitDoseForm
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
Requirements

MAY contain zero or one [0..1] administrationUnitCode, which SHALL be selected from ValueSet AdministrationUnitDoseForm urn:oid:2.16.840.1.113762.1.4.1021.30 DYNAMIC (CONF:1098-32081).

63. SubstanceAdministration.consumable
Control1..1
TypeElement
Requirements

SHALL contain exactly one [1..1] consumable (CONF:1098-32082).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
64. SubstanceAdministration.consumable.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
65. SubstanceAdministration.consumable.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on SubstanceAdministration.consumable.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
66. SubstanceAdministration.consumable.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetDirect
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueCSM
Fixed ValueCSM
67. SubstanceAdministration.consumable.manufacturedProduct
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ManufacturedProduct(MedicationInformation)
Requirements

This consumable SHALL contain exactly one [1..1] Medication Information (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.23:2014-06-09) (CONF:1098-32083).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
68. SubstanceAdministration.subject
Control0..1
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
69. SubstanceAdministration.subject.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
70. SubstanceAdministration.subject.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on SubstanceAdministration.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
71. SubstanceAdministration.subject.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetSubject
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueSBJ
Fixed ValueSBJ
72. SubstanceAdministration.subject.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
73. SubstanceAdministration.subject.awarenessCode
Control0..1
BindingThe codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
74. SubstanceAdministration.subject.relatedSubject
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
75. SubstanceAdministration.specimen
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Specimen
76. SubstanceAdministration.performer
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Performer2
Requirements

MAY contain zero or more [0..*] performer (CONF:1098-30470).

77. SubstanceAdministration.author
Definition

Base definition for all types defined in FHIR type system.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or one [0..1] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-32046).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
78. SubstanceAdministration.informant
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
79. SubstanceAdministration.informant.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
80. SubstanceAdministration.informant.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on SubstanceAdministration.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
81. SubstanceAdministration.informant.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationInformationGenerator
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueINF
Fixed ValueINF
82. SubstanceAdministration.informant.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
83. SubstanceAdministration.informant.assignedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
84. SubstanceAdministration.informant.relatedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
85. SubstanceAdministration.participant
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Participant2
86. SubstanceAdministration.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
SlicingThis element introduces a set of slices on SubstanceAdministration.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ act
  • profile @ act,
87. SubstanceAdministration.entryRelationship.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
88. SubstanceAdministration.entryRelationship.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
89. SubstanceAdministration.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
90. SubstanceAdministration.entryRelationship.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
91. SubstanceAdministration.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
92. SubstanceAdministration.entryRelationship.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
93. SubstanceAdministration.entryRelationship.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
94. SubstanceAdministration.entryRelationship.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
95. SubstanceAdministration.entryRelationship.observation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
96. SubstanceAdministration.entryRelationship.regionOfInterest
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
97. SubstanceAdministration.entryRelationship.observationMedia
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
98. SubstanceAdministration.entryRelationship.substanceAdministration
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
99. SubstanceAdministration.entryRelationship.supply
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
100. SubstanceAdministration.entryRelationship.procedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
101. SubstanceAdministration.entryRelationship.encounter
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
102. SubstanceAdministration.entryRelationship.organizer
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
103. SubstanceAdministration.entryRelationship.act
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
104. SubstanceAdministration.entryRelationship:priorityPreference
SliceNamepriorityPreference
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31104) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
105. SubstanceAdministration.entryRelationship:priorityPreference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
106. SubstanceAdministration.entryRelationship:priorityPreference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
107. SubstanceAdministration.entryRelationship:priorityPreference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31105).

Pattern ValueREFR
108. SubstanceAdministration.entryRelationship:priorityPreference.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
109. SubstanceAdministration.entryRelationship:priorityPreference.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
110. SubstanceAdministration.entryRelationship:priorityPreference.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
111. SubstanceAdministration.entryRelationship:priorityPreference.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
112. SubstanceAdministration.entryRelationship:priorityPreference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
113. SubstanceAdministration.entryRelationship:priorityPreference.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1098-31106).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
114. SubstanceAdministration.entryRelationship:priorityPreference.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
115. SubstanceAdministration.entryRelationship:priorityPreference.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
116. SubstanceAdministration.entryRelationship:priorityPreference.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
117. SubstanceAdministration.entryRelationship:priorityPreference.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
118. SubstanceAdministration.entryRelationship:priorityPreference.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
119. SubstanceAdministration.entryRelationship:priorityPreference.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
120. SubstanceAdministration.entryRelationship:priorityPreference.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
121. SubstanceAdministration.entryRelationship:priorityPreference.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
122. SubstanceAdministration.entryRelationship:indication
SliceNameindication
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-32069) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
123. SubstanceAdministration.entryRelationship:indication.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
124. SubstanceAdministration.entryRelationship:indication.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
125. SubstanceAdministration.entryRelationship:indication.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32070).

Pattern ValueRSON
126. SubstanceAdministration.entryRelationship:indication.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
127. SubstanceAdministration.entryRelationship:indication.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
128. SubstanceAdministration.entryRelationship:indication.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
129. SubstanceAdministration.entryRelationship:indication.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
130. SubstanceAdministration.entryRelationship:indication.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
131. SubstanceAdministration.entryRelationship:indication.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(Indication)
Requirements

SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1098-32071).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
132. SubstanceAdministration.entryRelationship:indication.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
133. SubstanceAdministration.entryRelationship:indication.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
134. SubstanceAdministration.entryRelationship:indication.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
135. SubstanceAdministration.entryRelationship:indication.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
136. SubstanceAdministration.entryRelationship:indication.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
137. SubstanceAdministration.entryRelationship:indication.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
138. SubstanceAdministration.entryRelationship:indication.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
139. SubstanceAdministration.entryRelationship:indication.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
140. SubstanceAdministration.entryRelationship:instruction
SliceNameinstruction
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-32072) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
subst-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
141. SubstanceAdministration.entryRelationship:instruction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
142. SubstanceAdministration.entryRelationship:instruction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on SubstanceAdministration.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
143. SubstanceAdministration.entryRelationship:instruction.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32073).

Pattern ValueSUBJ
144. SubstanceAdministration.entryRelationship:instruction.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
145. SubstanceAdministration.entryRelationship:instruction.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
146. SubstanceAdministration.entryRelationship:instruction.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
147. SubstanceAdministration.entryRelationship:instruction.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
148. SubstanceAdministration.entryRelationship:instruction.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
149. SubstanceAdministration.entryRelationship:instruction.observation
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
150. SubstanceAdministration.entryRelationship:instruction.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
151. SubstanceAdministration.entryRelationship:instruction.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
152. SubstanceAdministration.entryRelationship:instruction.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
153. SubstanceAdministration.entryRelationship:instruction.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
154. SubstanceAdministration.entryRelationship:instruction.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
155. SubstanceAdministration.entryRelationship:instruction.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
156. SubstanceAdministration.entryRelationship:instruction.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
157. SubstanceAdministration.entryRelationship:instruction.act
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(Instruction)
Requirements

SHALL contain exactly one [1..1] Instruction (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:1098-32074).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
158. SubstanceAdministration.reference
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
159. SubstanceAdministration.reference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
160. SubstanceAdministration.reference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on SubstanceAdministration.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
161. SubstanceAdministration.reference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
162. SubstanceAdministration.reference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
163. SubstanceAdministration.reference.externalAct
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalAct
164. SubstanceAdministration.reference.externalObservation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
165. SubstanceAdministration.reference.externalProcedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
166. SubstanceAdministration.reference.externalDocument
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument
167. SubstanceAdministration.precondition
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Precondition
Requirements

MAY contain zero or more [0..*] precondition (CONF:1098-32084).

168. SubstanceAdministration.precondition.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
169. SubstanceAdministration.precondition.typeCode
Control1..1
BindingThe codes SHALL be taken from ActRelationshipType
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

The precondition, if present, SHALL contain exactly one [1..1] @typeCode="PRCN" Precondition (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32085).

Pattern ValuePRCN
170. SubstanceAdministration.precondition.realmCode
Definition

When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
171. SubstanceAdministration.precondition.typeId
Definition

When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
172. SubstanceAdministration.precondition.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
173. SubstanceAdministration.precondition.criterion
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Criterion(PreconditionforSubstanceAdministration)
Requirements

The precondition, if present, SHALL contain exactly one [1..1] Precondition for Substance Administration (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.25:2014-06-09) (CONF:1098-32086).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))