Consolidated CDA Release 2.1 StructureDefinition Prototype Publication
2.1.0-draft1 - CI Build United States of America

This page is part of the CCDA: Consolidated CDA Release (v2.1.0-draft1: CCDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions

Resource Profile: ProblemObservation - Detailed Descriptions

Active as of 2023-01-16

Definitions for the 2.16.840.1.113883.10.20.22.4.4 resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. Observation
2. Observation.classCode
Requirements

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1198-9041).

Pattern ValueOBS
3. Observation.moodCode
Requirements

SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:1198-9042).

Pattern ValueEVN
4. Observation.negationInd
Requirements

MAY contain zero or one [0..1] @negationInd (CONF:1198-10139).

5. Observation.templateId
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
  • value @ root,
6. Observation.templateId:primary
SliceNameprimary
Control1..1
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1198-14926) such that it

7. Observation.templateId:primary.root
Control1..1
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.4" (CONF:1198-14927).

Pattern Value2.16.840.1.113883.10.20.22.4.4
8. Observation.templateId:primary.extension
Control1..1
Requirements

SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32508).

Pattern Value2015-08-01
9. Observation.id
Control10..*
Requirements

SHALL contain at least one [1..*] id (CONF:1198-9043).

10. Observation.code
BindingThe codes SHOULD be taken from Problem Type (SNOMEDCT)The codes SHALL be taken from ObservationType; other codes may be used where these codes are not suitable
Requirements

SHALL contain exactly one [1..1] code, which SHOULD be selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 DYNAMIC (CONF:1198-9045).

InvariantsDefined on this element
1198-32950: If code is selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 **DYNAMIC**, then it **SHALL** have at least one [1..*] translation, which **SHOULD** be selected from ValueSet Problem Type (LOINC) urn:oid:2.16.840.1.113762.1.4.1099.28 **DYNAMIC** (CONF:1198-32950) (CONF:1198-32950). (: null)
11. Observation.statusCode
Control10..1
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1198-9049).

12. Observation.statusCode.code
Control1..1
Requirements

This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:1198-19112).

Pattern Valuecompleted
13. Observation.effectiveTime
Control10..1
Requirements

SHALL contain exactly one [1..1] effectiveTime (CONF:1198-9050).

14. Observation.effectiveTime.low
Control1..1
Requirements

This effectiveTime SHALL contain exactly one [1..1] low (CONF:1198-15603).

15. Observation.effectiveTime.high
Control0..1
Requirements

This effectiveTime MAY contain zero or one [0..1] high (CONF:1198-15604).

16. Observation.value
Control10..1*
BindingThe codes SHOULD be taken from ProblemFor codes, see (unbound)
TypeChoice of: , http://hl7.org/fhir/cda/StructureDefinition/ED, http://hl7.org/fhir/cda/StructureDefinition/TS, http://hl7.org/fhir/cda/StructureDefinition/II, http://hl7.org/fhir/cda/StructureDefinition/ST, http://hl7.org/fhir/cda/StructureDefinition/PQ, http://hl7.org/fhir/cda/StructureDefinition/CE, http://hl7.org/fhir/cda/StructureDefinition/TEL, http://hl7.org/fhir/cda/StructureDefinition/MO, http://hl7.org/fhir/cda/StructureDefinition/AD, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-PQ, http://hl7.org/fhir/cda/StructureDefinition/EN, http://hl7.org/fhir/cda/StructureDefinition/BL, http://hl7.org/fhir/cda/StructureDefinition/REAL, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SC, http://hl7.org/fhir/cda/StructureDefinition/RTO-PQ-PQ, http://hl7.org/fhir/cda/StructureDefinition/CV, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/INT, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS
Requirements

SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Problem urn:oid:2.16.840.1.113883.3.88.12.3221.7.4 DYNAMIC (CONF:1198-9058).

17. Observation.value.code
Control0..1
Requirements

This value MAY contain zero or one [0..1] @code (CONF:1198-31871).

18. Observation.value.qualifier
Control0..*
Requirements

This value MAY contain zero or more [0..*] qualifier (CONF:1198-31870).

19. Observation.value.translation
Control0..?
SlicingThis element introduces a set of slices on Observation.value.translation. The slices are unordered and Open, and defines no discriminators to differentiate the slices
20. Observation.value.translation:alt
SliceNamealt
Control0..*
Requirements

This value MAY contain zero or more [0..*] translation (CONF:1198-16749) such that it

21. Observation.value.translation:alt.code
Control0..1
Requirements

MAY contain zero or one [0..1] @code (CodeSystem: ICD-10-CM urn:oid:2.16.840.1.113883.6.90 STATIC) (CONF:1198-16750).

22. Observation.author
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31147).

23. Observation.entryRelationship
SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ observation
24. Observation.entryRelationship:age
SliceNameage
Control0..1
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-9059) such that it

25. Observation.entryRelationship:age.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="SUBJ" Has subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-9060).

Pattern ValueSUBJ
26. Observation.entryRelationship:age.inversionInd
Control1..1
Requirements

SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:1198-9069).

Pattern Valuetrue
27. Observation.entryRelationship:age.observation
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(AgeObservation)
Requirements

SHALL contain exactly one [1..1] Age Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.31) (CONF:1198-15590).

28. Observation.entryRelationship:prognosis
SliceNameprognosis
Control0..1
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-29951) such that it

29. Observation.entryRelationship:prognosis.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31531).

Pattern ValueREFR
30. Observation.entryRelationship:prognosis.observation
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PrognosisObservation)
Requirements

SHALL contain exactly one [1..1] Prognosis Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.113) (CONF:1198-29952).

31. Observation.entryRelationship:priority
SliceNamepriority
Control0..*
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1198-31063) such that it

32. Observation.entryRelationship:priority.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31532).

Pattern ValueREFR
33. Observation.entryRelationship:priority.observation
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1198-31064).

34. Observation.entryRelationship:status
SliceNamestatus
Control0..1
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-9063) such that it

35. Observation.entryRelationship:status.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-9068).

Pattern ValueREFR
36. Observation.entryRelationship:status.observation
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(ProblemStatus)
Requirements

SHALL contain exactly one [1..1] Problem Status (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.6:2019-06-20) (CONF:1198-15591).

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Definition

Base definition for all types defined in FHIR type system.

Control10..1*
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
2. Observation.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassObservation
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1198-9041).

Pattern ValueOBS
3. Observation.moodCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:1198-9042).

Pattern ValueEVN
4. Observation.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

MAY contain zero or one [0..1] @negationInd (CONF:1198-10139).

5. Observation.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
  • value @ root,
6. Observation.templateId:primary
SliceNameprimary
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1198-14926) such that it

7. Observation.templateId:primary.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.4" (CONF:1198-14927).

Pattern Value2.16.840.1.113883.10.20.22.4.4
8. Observation.templateId:primary.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32508).

Pattern Value2015-08-01
9. Observation.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control10..*1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IIid
Requirements

SHALL contain at least one [1..*] id (CONF:1198-9043).

Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

10. Observation.code
Definition

Describes what was observed. Sometimes this is called the observation "name".

Control1..1
BindingThe codes SHOULD be taken from Problem Type (SNOMEDCT)For example codes, see LOINCCodes
Typehttp://hl7.org/fhir/cda/StructureDefinition/CDCodeableConcept
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

SHALL contain exactly one [1..1] code, which SHOULD be selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 DYNAMIC (CONF:1198-9045).

Knowing what kind of observation is being made is essential to understanding the observation.

Alternate NamesName
Comments

All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

InvariantsDefined on this element
1198-32950: If code is selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 **DYNAMIC**, then it **SHALL** have at least one [1..*] translation, which **SHOULD** be selected from ValueSet Problem Type (LOINC) urn:oid:2.16.840.1.113762.1.4.1099.28 **DYNAMIC** (CONF:1198-32950) (CONF:1198-32950). (: null)
11. Observation.statusCode
Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1198-9049).

12. Observation.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:1198-19112).

Pattern Valuecompleted
13. Observation.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
14. Observation.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
15. Observation.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
16. Observation.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
17. Observation.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
18. Observation.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
19. Observation.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
20. Observation.effectiveTime
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-TS
Requirements

SHALL contain exactly one [1..1] effectiveTime (CONF:1198-9050).

21. Observation.effectiveTime.low
Definition

This is the low limit of the interval.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/TS
Requirements

This effectiveTime SHALL contain exactly one [1..1] low (CONF:1198-15603).

22. Observation.effectiveTime.high
Definition

This is the high limit of the interval.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/TS
Requirements

This effectiveTime MAY contain zero or one [0..1] high (CONF:1198-15604).

23. Observation.value
Control1..1
BindingThe codes SHOULD be taken from Problem
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Problem urn:oid:2.16.840.1.113883.3.88.12.3221.7.4 DYNAMIC (CONF:1198-9058).

24. Observation.value.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

This value MAY contain zero or one [0..1] @code (CONF:1198-31871).

25. Observation.value.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
Requirements

This value MAY contain zero or more [0..*] qualifier (CONF:1198-31870).

26. Observation.value.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
SlicingThis element introduces a set of slices on Observation.value.translation. The slices are unordered and Open, and defines no discriminators to differentiate the slices
27. Observation.value.translation:alt
SliceNamealt
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

This value MAY contain zero or more [0..*] translation (CONF:1198-16749) such that it

28. Observation.value.translation:alt.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

MAY contain zero or one [0..1] @code (CodeSystem: ICD-10-CM urn:oid:2.16.840.1.113883.6.90 STATIC) (CONF:1198-16750).

29. Observation.author
Definition

Base definition for all types defined in FHIR type system.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31147).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. Observation.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ observation
31. Observation.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
32. Observation.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
33. Observation.entryRelationship:age
SliceNameage
Control0..1
TypeElement
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-9059) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
34. Observation.entryRelationship:age.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="SUBJ" Has subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-9060).

Pattern ValueSUBJ
35. Observation.entryRelationship:age.inversionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:1198-9069).

Pattern Valuetrue
36. Observation.entryRelationship:age.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
37. Observation.entryRelationship:age.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(AgeObservation)
Requirements

SHALL contain exactly one [1..1] Age Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.31) (CONF:1198-15590).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. Observation.entryRelationship:age.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
39. Observation.entryRelationship:age.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
40. Observation.entryRelationship:age.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
41. Observation.entryRelationship:age.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
42. Observation.entryRelationship:age.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
43. Observation.entryRelationship:age.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
44. Observation.entryRelationship:age.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
45. Observation.entryRelationship:age.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
46. Observation.entryRelationship:prognosis
SliceNameprognosis
Control0..1
TypeElement
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-29951) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
47. Observation.entryRelationship:prognosis.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31531).

Pattern ValueREFR
48. Observation.entryRelationship:prognosis.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
49. Observation.entryRelationship:prognosis.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PrognosisObservation)
Requirements

SHALL contain exactly one [1..1] Prognosis Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.113) (CONF:1198-29952).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
50. Observation.entryRelationship:prognosis.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
51. Observation.entryRelationship:prognosis.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
52. Observation.entryRelationship:prognosis.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
53. Observation.entryRelationship:prognosis.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
54. Observation.entryRelationship:prognosis.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
55. Observation.entryRelationship:prognosis.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
56. Observation.entryRelationship:prognosis.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
57. Observation.entryRelationship:prognosis.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
58. Observation.entryRelationship:priority
SliceNamepriority
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1198-31063) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
59. Observation.entryRelationship:priority.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31532).

Pattern ValueREFR
60. Observation.entryRelationship:priority.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
61. Observation.entryRelationship:priority.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1198-31064).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
62. Observation.entryRelationship:priority.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
63. Observation.entryRelationship:priority.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
64. Observation.entryRelationship:priority.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
65. Observation.entryRelationship:priority.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
66. Observation.entryRelationship:priority.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
67. Observation.entryRelationship:priority.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
68. Observation.entryRelationship:priority.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
69. Observation.entryRelationship:priority.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
70. Observation.entryRelationship:status
SliceNamestatus
Control0..1
TypeElement
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-9063) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
71. Observation.entryRelationship:status.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-9068).

Pattern ValueREFR
72. Observation.entryRelationship:status.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
73. Observation.entryRelationship:status.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(ProblemStatus)
Requirements

SHALL contain exactly one [1..1] Problem Status (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.6:2019-06-20) (CONF:1198-15591).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
74. Observation.entryRelationship:status.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
75. Observation.entryRelationship:status.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
76. Observation.entryRelationship:status.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
77. Observation.entryRelationship:status.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
78. Observation.entryRelationship:status.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
79. Observation.entryRelationship:status.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
80. Observation.entryRelationship:status.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
81. Observation.entryRelationship:status.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
2. Observation.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassObservation
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1198-9041).

Pattern ValueOBS
3. Observation.moodCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:1198-9042).

Pattern ValueEVN
4. Observation.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

MAY contain zero or one [0..1] @negationInd (CONF:1198-10139).

5. Observation.realmCode
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
6. Observation.typeId
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
7. Observation.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
  • value @ root,
8. Observation.templateId:primary
SliceNameprimary
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1198-14926) such that it

9. Observation.templateId:primary.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
10. Observation.templateId:primary.assigningAuthorityName
Definition

A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
11. Observation.templateId:primary.displayable
Definition

Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
12. Observation.templateId:primary.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.4" (CONF:1198-14927).

Pattern Value2.16.840.1.113883.10.20.22.4.4
13. Observation.templateId:primary.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32508).

Pattern Value2015-08-01
14. Observation.id
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain at least one [1..*] id (CONF:1198-9043).

15. Observation.code
Control1..1
BindingThe codes SHOULD be taken from Problem Type (SNOMEDCT)
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

SHALL contain exactly one [1..1] code, which SHOULD be selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 DYNAMIC (CONF:1198-9045).

InvariantsDefined on this element
1198-32950: If code is selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 **DYNAMIC**, then it **SHALL** have at least one [1..*] translation, which **SHOULD** be selected from ValueSet Problem Type (LOINC) urn:oid:2.16.840.1.113762.1.4.1099.28 **DYNAMIC** (CONF:1198-32950) (CONF:1198-32950). (: )
16. Observation.derivationExpr
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ST
17. Observation.text
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
XML RepresentationThe type of this property is determined using the xsi:type attribute.
18. Observation.statusCode
Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1198-9049).

19. Observation.statusCode.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
20. Observation.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:1198-19112).

Pattern Valuecompleted
21. Observation.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
22. Observation.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
23. Observation.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
24. Observation.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
25. Observation.statusCode.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet.
26. Observation.statusCode.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion.
27. Observation.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
28. Observation.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
29. Observation.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
30. Observation.effectiveTime
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-TS
Requirements

SHALL contain exactly one [1..1] effectiveTime (CONF:1198-9050).

31. Observation.effectiveTime.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
32. Observation.effectiveTime.value
Definition

A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression.

Control0..1
TypedateTime
XML RepresentationIn the XML format, this property is represented as an attribute.
33. Observation.effectiveTime.inclusive
Definition

Specifies whether the limit is included in the interval (interval is closed) or excluded from the interval (interval is open).

Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
34. Observation.effectiveTime.operator
Definition

A code specifying whether the set component is included (union) or excluded (set-difference) from the set, or other set operations with the current set component and the set as constructed from the representation stream up to the current point.

Control0..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
35. Observation.effectiveTime.low
Definition

This is the low limit of the interval.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/TS
Requirements

This effectiveTime SHALL contain exactly one [1..1] low (CONF:1198-15603).

36. Observation.effectiveTime.high
Definition

This is the high limit of the interval.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/TS
Requirements

This effectiveTime MAY contain zero or one [0..1] high (CONF:1198-15604).

37. Observation.effectiveTime.width
Definition

The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/PQ
38. Observation.effectiveTime.center
Definition

The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/TS
39. Observation.priorityCode
Control0..1
BindingThe codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
40. Observation.repeatNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-INT
41. Observation.languageCode
Control0..1
BindingThe codes SHALL be taken from HumanLanguage
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
42. Observation.value
Control1..1
BindingThe codes SHOULD be taken from Problem
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Problem urn:oid:2.16.840.1.113883.3.88.12.3221.7.4 DYNAMIC (CONF:1198-9058).

43. Observation.value.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
44. Observation.value.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

This value MAY contain zero or one [0..1] @code (CONF:1198-31871).

45. Observation.value.codeSystem
Definition

Specifies the code system that defines the code.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
46. Observation.value.codeSystemName
Definition

The common name of the coding system.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
47. Observation.value.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
48. Observation.value.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
49. Observation.value.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet.
50. Observation.value.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion.
51. Observation.value.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
52. Observation.value.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
Requirements

This value MAY contain zero or more [0..*] qualifier (CONF:1198-31870).

53. Observation.value.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
SlicingThis element introduces a set of slices on Observation.value.translation. The slices are unordered and Open, and defines no discriminators to differentiate the slices
54. Observation.value.translation:alt
SliceNamealt
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

This value MAY contain zero or more [0..*] translation (CONF:1198-16749) such that it

55. Observation.value.translation:alt.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
56. Observation.value.translation:alt.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

MAY contain zero or one [0..1] @code (CodeSystem: ICD-10-CM urn:oid:2.16.840.1.113883.6.90 STATIC) (CONF:1198-16750).

57. Observation.value.translation:alt.codeSystem
Definition

Specifies the code system that defines the code.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
58. Observation.value.translation:alt.codeSystemName
Definition

The common name of the coding system.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
59. Observation.value.translation:alt.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
60. Observation.value.translation:alt.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
61. Observation.value.translation:alt.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet.
62. Observation.value.translation:alt.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion.
63. Observation.value.translation:alt.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
64. Observation.value.translation:alt.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
65. Observation.value.translation:alt.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
66. Observation.interpretationCode
Control0..*
BindingThe codes SHALL be taken from ObservationInterpretation
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
67. Observation.methodCode
Control0..*
BindingThe codes SHALL be taken from ObservationMethod; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
68. Observation.targetSiteCode
Definition

Drawn from concept domain ActSite

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
69. Observation.subject
Control0..1
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
70. Observation.subject.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
71. Observation.subject.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
72. Observation.subject.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetSubject
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueSBJ
Fixed ValueSBJ
73. Observation.subject.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
74. Observation.subject.awarenessCode
Control0..1
BindingThe codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
75. Observation.subject.relatedSubject
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
76. Observation.specimen
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Specimen
77. Observation.performer
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Performer2
78. Observation.author
Definition

Base definition for all types defined in FHIR type system.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31147).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
79. Observation.informant
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
80. Observation.informant.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
81. Observation.informant.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
82. Observation.informant.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationInformationGenerator
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueINF
Fixed ValueINF
83. Observation.informant.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
84. Observation.informant.assignedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
85. Observation.informant.relatedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
86. Observation.participant
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Participant2
87. Observation.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ observation
88. Observation.entryRelationship.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
89. Observation.entryRelationship.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
90. Observation.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
91. Observation.entryRelationship.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
92. Observation.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
93. Observation.entryRelationship.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
94. Observation.entryRelationship.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
95. Observation.entryRelationship.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
96. Observation.entryRelationship.observation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
97. Observation.entryRelationship.regionOfInterest
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
98. Observation.entryRelationship.observationMedia
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
99. Observation.entryRelationship.substanceAdministration
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
100. Observation.entryRelationship.supply
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
101. Observation.entryRelationship.procedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
102. Observation.entryRelationship.encounter
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
103. Observation.entryRelationship.organizer
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
104. Observation.entryRelationship.act
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
105. Observation.entryRelationship:age
SliceNameage
Control0..1
TypeElement
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-9059) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
106. Observation.entryRelationship:age.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
107. Observation.entryRelationship:age.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
108. Observation.entryRelationship:age.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="SUBJ" Has subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-9060).

Pattern ValueSUBJ
109. Observation.entryRelationship:age.inversionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:1198-9069).

Pattern Valuetrue
110. Observation.entryRelationship:age.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
111. Observation.entryRelationship:age.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
112. Observation.entryRelationship:age.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
113. Observation.entryRelationship:age.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
114. Observation.entryRelationship:age.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(AgeObservation)
Requirements

SHALL contain exactly one [1..1] Age Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.31) (CONF:1198-15590).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
115. Observation.entryRelationship:age.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
116. Observation.entryRelationship:age.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
117. Observation.entryRelationship:age.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
118. Observation.entryRelationship:age.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
119. Observation.entryRelationship:age.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
120. Observation.entryRelationship:age.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
121. Observation.entryRelationship:age.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
122. Observation.entryRelationship:age.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
123. Observation.entryRelationship:prognosis
SliceNameprognosis
Control0..1
TypeElement
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-29951) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
124. Observation.entryRelationship:prognosis.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
125. Observation.entryRelationship:prognosis.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
126. Observation.entryRelationship:prognosis.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31531).

Pattern ValueREFR
127. Observation.entryRelationship:prognosis.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
128. Observation.entryRelationship:prognosis.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
129. Observation.entryRelationship:prognosis.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
130. Observation.entryRelationship:prognosis.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
131. Observation.entryRelationship:prognosis.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
132. Observation.entryRelationship:prognosis.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PrognosisObservation)
Requirements

SHALL contain exactly one [1..1] Prognosis Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.113) (CONF:1198-29952).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
133. Observation.entryRelationship:prognosis.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
134. Observation.entryRelationship:prognosis.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
135. Observation.entryRelationship:prognosis.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
136. Observation.entryRelationship:prognosis.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
137. Observation.entryRelationship:prognosis.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
138. Observation.entryRelationship:prognosis.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
139. Observation.entryRelationship:prognosis.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
140. Observation.entryRelationship:prognosis.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
141. Observation.entryRelationship:priority
SliceNamepriority
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1198-31063) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
142. Observation.entryRelationship:priority.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
143. Observation.entryRelationship:priority.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
144. Observation.entryRelationship:priority.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31532).

Pattern ValueREFR
145. Observation.entryRelationship:priority.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
146. Observation.entryRelationship:priority.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
147. Observation.entryRelationship:priority.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
148. Observation.entryRelationship:priority.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
149. Observation.entryRelationship:priority.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
150. Observation.entryRelationship:priority.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1198-31064).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
151. Observation.entryRelationship:priority.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
152. Observation.entryRelationship:priority.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
153. Observation.entryRelationship:priority.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
154. Observation.entryRelationship:priority.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
155. Observation.entryRelationship:priority.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
156. Observation.entryRelationship:priority.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
157. Observation.entryRelationship:priority.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
158. Observation.entryRelationship:priority.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
159. Observation.entryRelationship:status
SliceNamestatus
Control0..1
TypeElement
Requirements

MAY contain zero or one [0..1] entryRelationship (CONF:1198-9063) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
160. Observation.entryRelationship:status.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
161. Observation.entryRelationship:status.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
162. Observation.entryRelationship:status.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-9068).

Pattern ValueREFR
163. Observation.entryRelationship:status.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
164. Observation.entryRelationship:status.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
165. Observation.entryRelationship:status.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
166. Observation.entryRelationship:status.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
167. Observation.entryRelationship:status.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
168. Observation.entryRelationship:status.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(ProblemStatus)
Requirements

SHALL contain exactly one [1..1] Problem Status (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.6:2019-06-20) (CONF:1198-15591).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
169. Observation.entryRelationship:status.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
170. Observation.entryRelationship:status.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
171. Observation.entryRelationship:status.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
172. Observation.entryRelationship:status.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
173. Observation.entryRelationship:status.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
174. Observation.entryRelationship:status.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
175. Observation.entryRelationship:status.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
176. Observation.entryRelationship:status.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
177. Observation.reference
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
178. Observation.reference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
179. Observation.reference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
180. Observation.reference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
181. Observation.reference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
182. Observation.reference.externalAct
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalAct
183. Observation.reference.externalObservation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
184. Observation.reference.externalProcedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
185. Observation.reference.externalDocument
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument
186. Observation.precondition
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Precondition
187. Observation.referenceRange
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
188. Observation.referenceRange.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
189. Observation.referenceRange.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.referenceRange.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
190. Observation.referenceRange.typeCode
Control1..1
BindingThe codes SHALL be taken from ActRelationshipPertains
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueREFV
Fixed ValueREFV
191. Observation.referenceRange.observationRange
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationRange