Consolidated CDA Release 2.1 StructureDefinition Prototype Publication
2.1.0-draft1 - CI Build
United States of America
Consolidated CDA Release 2.1 StructureDefinition Prototype Publication
2.1.0-draft1 - CI Build
United States of America
This page is part of the CCDA: Consolidated CDA Release (v2.1.0-draft1: CCDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions 
| Active as of 2023-01-16 |
Definitions for the 2.16.840.1.113883.10.20.22.4.140 resource profile.
Guidance on how to interpret the contents of this table can be found here.
| 1. Act | |
| 2. Act.classCode | |
| Requirements | SHALL contain exactly one [1..1] @classCode="PCPR" provision of care (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1098-30884). |
| Pattern Value | PCPR |
| 3. Act.moodCode | |
| Binding | The codes SHALL be taken from Patient Referral Act moodCodeFor codes, see (unbound) |
| Requirements | SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Patient Referral Act moodCode urn:oid:2.16.840.1.113883.11.20.9.66 STATIC 2014-09-01 (CONF:1098-30885). |
| 4. Act.templateId | |
| Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 5. Act.templateId:primary | |
| SliceName | primary |
| Control | 1..1 |
| Requirements | SHALL contain exactly one [1..1] templateId (CONF:1098-30886) such that it |
| 6. Act.templateId:primary.root | |
| Control | 1..1 |
| Requirements | SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.140" (CONF:1098-30887). |
| Pattern Value | 2.16.840.1.113883.10.20.22.4.140 |
| 7. Act.id | |
| Control | 10..* |
| Requirements | SHALL contain at least one [1..*] id (CONF:1098-30888). |
| 8. Act.code | |
| Binding | The codes SHALL be taken from Referral TypesThe codes SHALL be taken from v3 Code System ActCode; other codes may be used where these codes are not suitable |
| Requirements | SHALL contain exactly one [1..1] code, which SHALL be selected from ValueSet Referral Types urn:oid:2.16.840.1.113883.11.20.9.56 DYNAMIC (CONF:1098-30889). |
| 9. Act.statusCode | |
| Control | 10..1 |
| Requirements | SHALL contain exactly one [1..1] statusCode (CONF:1098-30892). |
| 10. Act.statusCode.code | |
| Control | 1..1 |
| Requirements | This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31598). |
| Pattern Value | active |
| 11. Act.effectiveTime | |
| Control | 10..1 |
| Requirements | SHALL contain exactly one [1..1] effectiveTime (CONF:1098-30893). |
| 12. Act.priorityCode | |
| Requirements | SHOULD contain zero or one [0..1] priorityCode (CONF:1098-32623). |
| 13. Act.author | |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation) |
| Requirements | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-31612). |
| 14. Act.participant | |
| Requirements | MAY contain zero or more [0..*] participant (CONF:1098-32635). |
| 15. Act.participant.typeCode | |
| Control | 1..1 |
| Requirements | The participant, if present, SHALL contain exactly one [1..1] @typeCode="REFT" Referred to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32638). |
| Pattern Value | REFT |
| 16. Act.participant.participantRole | |
| Control | 1..1 |
| Requirements | The participant, if present, SHALL contain exactly one [1..1] participantRole (CONF:1098-32636). |
| 17. Act.participant.participantRole.code | |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from Healthcare Provider Taxonomy |
| Requirements | This participantRole MAY contain zero or one [0..1] code, which SHOULD be selected from ValueSet Healthcare Provider Taxonomy urn:oid:2.16.840.1.114222.4.11.1066 DYNAMIC (CONF:1098-32637). |
| 18. Act.entryRelationship | |
| Slicing | This element introduces a set of slices on Act.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 19. Act.entryRelationship:entryRelationship1 | |
| SliceName | entryRelationship1 |
| Control | 0..* |
| Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-31604) such that it |
| 20. Act.entryRelationship:entryRelationship1.typeCode | |
| Control | 1..1 |
| Requirements | SHALL contain exactly one [1..1] @typeCode="SUBJ" has subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31613). |
| Pattern Value | SUBJ |
| 21. Act.entryRelationship:entryRelationship1.observation | |
| Control | 1..1 |
| Requirements | SHALL contain exactly one [1..1] observation (CONF:1098-31605). |
| 22. Act.entryRelationship:entryRelationship1.observation.classCode | |
| Control | 1..1 |
| Requirements | This observation SHALL contain exactly one [1..1] @classCode="OBS" observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-31606). |
| Pattern Value | OBS |
| 23. Act.entryRelationship:entryRelationship1.observation.moodCode | |
| Control | 1..1 |
| Requirements | This observation SHALL contain exactly one [1..1] @moodCode="RQO" request (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1098-31607). |
| Pattern Value | RQO |
| 24. Act.entryRelationship:entryRelationship1.observation.code | |
| Control | 1..1 |
| Requirements | This observation SHALL contain exactly one [1..1] code (CONF:1098-31608). |
| 25. Act.entryRelationship:entryRelationship1.observation.code.code | |
| Control | 1..1 |
| Requirements | This code SHALL contain exactly one [1..1] @code="ASSERTION" assertion (CONF:1098-31619). |
| Pattern Value | ASSERTION |
| 26. Act.entryRelationship:entryRelationship1.observation.code.codeSystem | |
| Control | 1..1 |
| Requirements | This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4 " (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:1098-31620). |
| Pattern Value | 2.16.840.1.113883.5.4 |
| 27. Act.entryRelationship:entryRelationship1.observation.statusCode | |
| Control | 1..1 |
| Requirements | This observation SHALL contain exactly one [1..1] statusCode (CONF:1098-31614). |
| 28. Act.entryRelationship:entryRelationship1.observation.statusCode.code | |
| Control | 1..1 |
| Requirements | This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31615). |
| Pattern Value | completed |
| 29. Act.entryRelationship:entryRelationship1.observation.priorityCode | |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from ActPriority |
| Requirements | This observation SHOULD contain zero or one [0..1] priorityCode, which SHOULD be selected from ValueSet ActPriority urn:oid:2.16.840.1.113883.1.11.16866 DYNAMIC (CONF:1098-32443). |
| 30. Act.entryRelationship:entryRelationship1.observation.value | |
| Control | 1..1 |
| Binding | The codes SHOULD be taken from Care Model |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| Requirements | This observation SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Care Model urn:oid:2.16.840.1.113883.11.20.9.61 DYNAMIC (CONF:1098-31611). |
| 31. Act.entryRelationship:indication | |
| SliceName | indication |
| Control | 0..* |
| Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-31635) such that it |
| 32. Act.entryRelationship:indication.typeCode | |
| Control | 1..1 |
| Requirements | SHALL contain exactly one [1..1] @typeCode="RSON" has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31636). |
| Pattern Value | RSON |
| 33. Act.entryRelationship:indication.observation | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation(Indication) |
| Requirements | SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1098-32634). |
Guidance on how to interpret the contents of this table can be found here.
| 1. Act | |
| Definition | Base definition for all types defined in FHIR type system. |
| Control | 10..1* |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 2. Act.classCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @classCode="PCPR" provision of care (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1098-30884). |
| Pattern Value | PCPR |
| 3. Act.moodCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Patient Referral Act moodCode |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Patient Referral Act moodCode urn:oid:2.16.840.1.113883.11.20.9.66 STATIC 2014-09-01 (CONF:1098-30885). |
| 4. Act.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 5. Act.templateId:primary | |
| SliceName | primary |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| Requirements | SHALL contain exactly one [1..1] templateId (CONF:1098-30886) such that it |
| 6. Act.templateId:primary.root | |
| Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.140" (CONF:1098-30887). |
| Pattern Value | 2.16.840.1.113883.10.20.22.4.140 |
| 7. Act.id | |
| Control | 1..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| Requirements | SHALL contain at least one [1..*] id (CONF:1098-30888). |
| 8. Act.code | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Referral Types |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| Requirements | SHALL contain exactly one [1..1] code, which SHALL be selected from ValueSet Referral Types urn:oid:2.16.840.1.113883.11.20.9.56 DYNAMIC (CONF:1098-30889). |
| 9. Act.statusCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActStatus |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| Requirements | SHALL contain exactly one [1..1] statusCode (CONF:1098-30892). |
| 10. Act.statusCode.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31598). |
| Pattern Value | active |
| 11. Act.statusCode.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 12. Act.statusCode.codeSystemName | |
| Definition | The common name of the coding system. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 13. Act.statusCode.codeSystemVersion | |
| Definition | If applicable, a version descriptor defined specifically for the given code system. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 14. Act.statusCode.displayName | |
| Definition | A name or title for the code, under which the sending system shows the code value to its users. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 15. Act.statusCode.originalText | |
| Definition | The text or phrase used as the basis for the coding. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 16. Act.statusCode.qualifier | |
| Definition | Specifies additional codes that increase the specificity of the the primary code. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CR |
| 17. Act.statusCode.translation | |
| Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 18. Act.effectiveTime | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
| Requirements | SHALL contain exactly one [1..1] effectiveTime (CONF:1098-30893). |
| 19. Act.priorityCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| Requirements | SHOULD contain zero or one [0..1] priorityCode (CONF:1098-32623). |
| 20. Act.author | |
| Definition | Base definition for all types defined in FHIR type system. |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation) |
| Requirements | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-31612). |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 21. Act.participant | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
| Requirements | MAY contain zero or more [0..*] participant (CONF:1098-32635). |
| 22. Act.participant.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationType |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | The participant, if present, SHALL contain exactly one [1..1] @typeCode="REFT" Referred to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32638). |
| Pattern Value | REFT |
| 23. Act.participant.participantRole | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ParticipantRole |
| Requirements | The participant, if present, SHALL contain exactly one [1..1] participantRole (CONF:1098-32636). |
| 24. Act.participant.participantRole.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from RoleClassRoot |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | ROL |
| 25. Act.participant.participantRole.code | |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from Healthcare Provider Taxonomy |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| Requirements | This participantRole MAY contain zero or one [0..1] code, which SHOULD be selected from ValueSet Healthcare Provider Taxonomy urn:oid:2.16.840.1.114222.4.11.1066 DYNAMIC (CONF:1098-32637). |
| 26. Act.entryRelationship | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Act.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 27. Act.entryRelationship.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 28. Act.entryRelationship.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 29. Act.entryRelationship:entryRelationship1 | |
| SliceName | entryRelationship1 |
| Control | 0..* |
| Type | Element |
| Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-31604) such that it |
| Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 30. Act.entryRelationship:entryRelationship1.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @typeCode="SUBJ" has subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31613). |
| Pattern Value | SUBJ |
| 31. Act.entryRelationship:entryRelationship1.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 32. Act.entryRelationship:entryRelationship1.observation | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
| Requirements | SHALL contain exactly one [1..1] observation (CONF:1098-31605). |
| 33. Act.entryRelationship:entryRelationship1.observation.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActClassObservation |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This observation SHALL contain exactly one [1..1] @classCode="OBS" observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-31606). |
| Pattern Value | OBS |
| 34. Act.entryRelationship:entryRelationship1.observation.moodCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This observation SHALL contain exactly one [1..1] @moodCode="RQO" request (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1098-31607). |
| Pattern Value | RQO |
| 35. Act.entryRelationship:entryRelationship1.observation.code | |
| Definition | Describes what was observed. Sometimes this is called the observation "name". |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ObservationType; other codes may be used where these codes are not suitableFor example codes, see LOINCCodes |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CDCodeableConcept |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| Requirements | This observation SHALL contain exactly one [1..1] code (CONF:1098-31608). Knowing what kind of observation is being made is essential to understanding the observation. |
| Alternate Names | Name |
| Comments | All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation. |
| 36. Act.entryRelationship:entryRelationship1.observation.code.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This code SHALL contain exactly one [1..1] @code="ASSERTION" assertion (CONF:1098-31619). |
| Pattern Value | ASSERTION |
| 37. Act.entryRelationship:entryRelationship1.observation.code.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4 " (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:1098-31620). |
| Pattern Value | 2.16.840.1.113883.5.4 |
| 38. Act.entryRelationship:entryRelationship1.observation.statusCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActStatus |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| Requirements | This observation SHALL contain exactly one [1..1] statusCode (CONF:1098-31614). |
| 39. Act.entryRelationship:entryRelationship1.observation.statusCode.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31615). |
| Pattern Value | completed |
| 40. Act.entryRelationship:entryRelationship1.observation.statusCode.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 41. Act.entryRelationship:entryRelationship1.observation.statusCode.codeSystemName | |
| Definition | The common name of the coding system. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 42. Act.entryRelationship:entryRelationship1.observation.statusCode.codeSystemVersion | |
| Definition | If applicable, a version descriptor defined specifically for the given code system. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 43. Act.entryRelationship:entryRelationship1.observation.statusCode.displayName | |
| Definition | A name or title for the code, under which the sending system shows the code value to its users. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 44. Act.entryRelationship:entryRelationship1.observation.statusCode.originalText | |
| Definition | The text or phrase used as the basis for the coding. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 45. Act.entryRelationship:entryRelationship1.observation.statusCode.qualifier | |
| Definition | Specifies additional codes that increase the specificity of the the primary code. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CR |
| 46. Act.entryRelationship:entryRelationship1.observation.statusCode.translation | |
| Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 47. Act.entryRelationship:entryRelationship1.observation.priorityCode | |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from ActPriority |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| Requirements | This observation SHOULD contain zero or one [0..1] priorityCode, which SHOULD be selected from ValueSet ActPriority urn:oid:2.16.840.1.113883.1.11.16866 DYNAMIC (CONF:1098-32443). |
| 48. Act.entryRelationship:entryRelationship1.observation.value | |
| Control | 1..1 |
| Binding | The codes SHOULD be taken from Care Model |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| Requirements | This observation SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Care Model urn:oid:2.16.840.1.113883.11.20.9.61 DYNAMIC (CONF:1098-31611). |
| 49. Act.entryRelationship:entryRelationship1.regionOfInterest | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 50. Act.entryRelationship:entryRelationship1.observationMedia | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 51. Act.entryRelationship:entryRelationship1.substanceAdministration | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 52. Act.entryRelationship:entryRelationship1.supply | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 53. Act.entryRelationship:entryRelationship1.procedure | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 54. Act.entryRelationship:entryRelationship1.encounter | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 55. Act.entryRelationship:entryRelationship1.organizer | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 56. Act.entryRelationship:entryRelationship1.act | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
| 57. Act.entryRelationship:indication | |
| SliceName | indication |
| Control | 0..* |
| Type | Element |
| Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-31635) such that it |
| Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 58. Act.entryRelationship:indication.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @typeCode="RSON" has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31636). |
| Pattern Value | RSON |
| 59. Act.entryRelationship:indication.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 60. Act.entryRelationship:indication.observation | |
| Definition | Base definition for all types defined in FHIR type system. |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation(Indication) |
| Requirements | SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1098-32634). |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 61. Act.entryRelationship:indication.regionOfInterest | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 62. Act.entryRelationship:indication.observationMedia | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 63. Act.entryRelationship:indication.substanceAdministration | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 64. Act.entryRelationship:indication.supply | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 65. Act.entryRelationship:indication.procedure | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 66. Act.entryRelationship:indication.encounter | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 67. Act.entryRelationship:indication.organizer | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 68. Act.entryRelationship:indication.act | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
Guidance on how to interpret the contents of this table can be found here.
| 1. Act | |
| Definition | Base definition for all types defined in FHIR type system. |
| Control | 1..1 |
| 2. Act.classCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @classCode="PCPR" provision of care (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1098-30884). |
| Pattern Value | PCPR |
| 3. Act.moodCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Patient Referral Act moodCode |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Patient Referral Act moodCode urn:oid:2.16.840.1.113883.11.20.9.66 STATIC 2014-09-01 (CONF:1098-30885). |
| 4. Act.realmCode | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 5. Act.typeId | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 6. Act.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 7. Act.templateId:primary | |
| SliceName | primary |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| Requirements | SHALL contain exactly one [1..1] templateId (CONF:1098-30886) such that it |
| 8. Act.templateId:primary.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from NullFlavor |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 9. Act.templateId:primary.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 10. Act.templateId:primary.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 11. Act.templateId:primary.root | |
| Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.140" (CONF:1098-30887). |
| Pattern Value | 2.16.840.1.113883.10.20.22.4.140 |
| 12. Act.templateId:primary.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 13. Act.id | |
| Control | 1..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| Requirements | SHALL contain at least one [1..*] id (CONF:1098-30888). |
| 14. Act.code | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Referral Types |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| Requirements | SHALL contain exactly one [1..1] code, which SHALL be selected from ValueSet Referral Types urn:oid:2.16.840.1.113883.11.20.9.56 DYNAMIC (CONF:1098-30889). |
| 15. Act.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 16. Act.text | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 17. Act.statusCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActStatus |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| Requirements | SHALL contain exactly one [1..1] statusCode (CONF:1098-30892). |
| 18. Act.statusCode.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from NullFlavor |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 19. Act.statusCode.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31598). |
| Pattern Value | active |
| 20. Act.statusCode.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 21. Act.statusCode.codeSystemName | |
| Definition | The common name of the coding system. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 22. Act.statusCode.codeSystemVersion | |
| Definition | If applicable, a version descriptor defined specifically for the given code system. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 23. Act.statusCode.displayName | |
| Definition | A name or title for the code, under which the sending system shows the code value to its users. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 24. Act.statusCode.sdtcValueSet | |
| Definition | The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet. |
| 25. Act.statusCode.sdtcValueSetVersion | |
| Definition | The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion. |
| 26. Act.statusCode.originalText | |
| Definition | The text or phrase used as the basis for the coding. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 27. Act.statusCode.qualifier | |
| Definition | Specifies additional codes that increase the specificity of the the primary code. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CR |
| 28. Act.statusCode.translation | |
| Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 29. Act.effectiveTime | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
| Requirements | SHALL contain exactly one [1..1] effectiveTime (CONF:1098-30893). |
| 30. Act.priorityCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| Requirements | SHOULD contain zero or one [0..1] priorityCode (CONF:1098-32623). |
| 31. Act.languageCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from HumanLanguage |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 32. Act.subject | |
| Control | 0..1 |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 33. Act.subject.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 34. Act.subject.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 35. Act.subject.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationTargetSubject |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | SBJ |
| Fixed Value | SBJ |
| 36. Act.subject.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 37. Act.subject.awarenessCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 38. Act.subject.relatedSubject | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject |
| 39. Act.specimen | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Specimen |
| 40. Act.performer | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
| 41. Act.author | |
| Definition | Base definition for all types defined in FHIR type system. |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation) |
| Requirements | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-31612). |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 42. Act.informant | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 43. Act.informant.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 44. Act.informant.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 45. Act.informant.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationInformationGenerator |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | INF |
| Fixed Value | INF |
| 46. Act.informant.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 47. Act.informant.assignedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity |
| 48. Act.informant.relatedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity |
| 49. Act.participant | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
| Requirements | MAY contain zero or more [0..*] participant (CONF:1098-32635). |
| 50. Act.participant.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from NullFlavor |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 51. Act.participant.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationType |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | The participant, if present, SHALL contain exactly one [1..1] @typeCode="REFT" Referred to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32638). |
| Pattern Value | REFT |
| 52. Act.participant.contextControlCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Fixed Value | OP |
| 53. Act.participant.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 54. Act.participant.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 55. Act.participant.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 56. Act.participant.sdtcFunctionCode | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| XML Representation | In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name functionCode. |
| 57. Act.participant.time | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
| 58. Act.participant.awarenessCode | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 59. Act.participant.participantRole | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ParticipantRole |
| Requirements | The participant, if present, SHALL contain exactly one [1..1] participantRole (CONF:1098-32636). |
| 60. Act.participant.participantRole.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from RoleClassRoot |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | ROL |
| 61. Act.participant.participantRole.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 62. Act.participant.participantRole.id | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 63. Act.participant.participantRole.sdtcIdentifiedBy | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IdentifiedBy |
| XML Representation | In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name identifiedBy. |
| 64. Act.participant.participantRole.code | |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from Healthcare Provider Taxonomy |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| Requirements | This participantRole MAY contain zero or one [0..1] code, which SHOULD be selected from ValueSet Healthcare Provider Taxonomy urn:oid:2.16.840.1.114222.4.11.1066 DYNAMIC (CONF:1098-32637). |
| 65. Act.participant.participantRole.addr | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/AD |
| 66. Act.participant.participantRole.telecom | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/TEL |
| 67. Act.participant.participantRole.playingDevice | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Device |
| 68. Act.participant.participantRole.playingEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/PlayingEntity |
| 69. Act.participant.participantRole.scopingEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Entity |
| 70. Act.entryRelationship | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Act.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 71. Act.entryRelationship.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 72. Act.entryRelationship.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 73. Act.entryRelationship.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 74. Act.entryRelationship.inversionInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 75. Act.entryRelationship.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 76. Act.entryRelationship.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
| 77. Act.entryRelationship.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 78. Act.entryRelationship.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 79. Act.entryRelationship.observation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
| 80. Act.entryRelationship.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 81. Act.entryRelationship.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 82. Act.entryRelationship.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 83. Act.entryRelationship.supply | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 84. Act.entryRelationship.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 85. Act.entryRelationship.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 86. Act.entryRelationship.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 87. Act.entryRelationship.act | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
| 88. Act.entryRelationship:entryRelationship1 | |
| SliceName | entryRelationship1 |
| Control | 0..* |
| Type | Element |
| Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-31604) such that it |
| Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 89. Act.entryRelationship:entryRelationship1.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 90. Act.entryRelationship:entryRelationship1.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 91. Act.entryRelationship:entryRelationship1.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @typeCode="SUBJ" has subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31613). |
| Pattern Value | SUBJ |
| 92. Act.entryRelationship:entryRelationship1.inversionInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 93. Act.entryRelationship:entryRelationship1.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 94. Act.entryRelationship:entryRelationship1.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
| 95. Act.entryRelationship:entryRelationship1.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 96. Act.entryRelationship:entryRelationship1.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 97. Act.entryRelationship:entryRelationship1.observation | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
| Requirements | SHALL contain exactly one [1..1] observation (CONF:1098-31605). |
| 98. Act.entryRelationship:entryRelationship1.observation.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActClassObservation |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This observation SHALL contain exactly one [1..1] @classCode="OBS" observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-31606). |
| Pattern Value | OBS |
| 99. Act.entryRelationship:entryRelationship1.observation.moodCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This observation SHALL contain exactly one [1..1] @moodCode="RQO" request (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1098-31607). |
| Pattern Value | RQO |
| 100. Act.entryRelationship:entryRelationship1.observation.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 101. Act.entryRelationship:entryRelationship1.observation.realmCode | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 102. Act.entryRelationship:entryRelationship1.observation.typeId | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 103. Act.entryRelationship:entryRelationship1.observation.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 104. Act.entryRelationship:entryRelationship1.observation.id | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/II |
| 105. Act.entryRelationship:entryRelationship1.observation.code | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ObservationType; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| Requirements | This observation SHALL contain exactly one [1..1] code (CONF:1098-31608). |
| 106. Act.entryRelationship:entryRelationship1.observation.code.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from NullFlavor |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 107. Act.entryRelationship:entryRelationship1.observation.code.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This code SHALL contain exactly one [1..1] @code="ASSERTION" assertion (CONF:1098-31619). |
| Pattern Value | ASSERTION |
| 108. Act.entryRelationship:entryRelationship1.observation.code.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4 " (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:1098-31620). |
| Pattern Value | 2.16.840.1.113883.5.4 |
| 109. Act.entryRelationship:entryRelationship1.observation.code.codeSystemName | |
| Definition | The common name of the coding system. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 110. Act.entryRelationship:entryRelationship1.observation.code.codeSystemVersion | |
| Definition | If applicable, a version descriptor defined specifically for the given code system. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 111. Act.entryRelationship:entryRelationship1.observation.code.displayName | |
| Definition | A name or title for the code, under which the sending system shows the code value to its users. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 112. Act.entryRelationship:entryRelationship1.observation.code.sdtcValueSet | |
| Definition | The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet. |
| 113. Act.entryRelationship:entryRelationship1.observation.code.sdtcValueSetVersion | |
| Definition | The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion. |
| 114. Act.entryRelationship:entryRelationship1.observation.code.originalText | |
| Definition | The text or phrase used as the basis for the coding. |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 115. Act.entryRelationship:entryRelationship1.observation.code.qualifier | |
| Definition | Specifies additional codes that increase the specificity of the the primary code. |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CR |
| 116. Act.entryRelationship:entryRelationship1.observation.code.translation | |
| Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 117. Act.entryRelationship:entryRelationship1.observation.derivationExpr | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ST |
| 118. Act.entryRelationship:entryRelationship1.observation.text | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 119. Act.entryRelationship:entryRelationship1.observation.statusCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActStatus |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| Requirements | This observation SHALL contain exactly one [1..1] statusCode (CONF:1098-31614). |
| 120. Act.entryRelationship:entryRelationship1.observation.statusCode.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from NullFlavor |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 121. Act.entryRelationship:entryRelationship1.observation.statusCode.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31615). |
| Pattern Value | completed |
| 122. Act.entryRelationship:entryRelationship1.observation.statusCode.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 123. Act.entryRelationship:entryRelationship1.observation.statusCode.codeSystemName | |
| Definition | The common name of the coding system. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 124. Act.entryRelationship:entryRelationship1.observation.statusCode.codeSystemVersion | |
| Definition | If applicable, a version descriptor defined specifically for the given code system. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 125. Act.entryRelationship:entryRelationship1.observation.statusCode.displayName | |
| Definition | A name or title for the code, under which the sending system shows the code value to its users. |
| Control | 0..0 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 126. Act.entryRelationship:entryRelationship1.observation.statusCode.sdtcValueSet | |
| Definition | The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet. |
| 127. Act.entryRelationship:entryRelationship1.observation.statusCode.sdtcValueSetVersion | |
| Definition | The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion. |
| 128. Act.entryRelationship:entryRelationship1.observation.statusCode.originalText | |
| Definition | The text or phrase used as the basis for the coding. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
| 129. Act.entryRelationship:entryRelationship1.observation.statusCode.qualifier | |
| Definition | Specifies additional codes that increase the specificity of the the primary code. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CR |
| 130. Act.entryRelationship:entryRelationship1.observation.statusCode.translation | |
| Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| 131. Act.entryRelationship:entryRelationship1.observation.effectiveTime | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
| 132. Act.entryRelationship:entryRelationship1.observation.priorityCode | |
| Control | 0..1 |
| Binding | The codes SHOULD be taken from ActPriority |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| Requirements | This observation SHOULD contain zero or one [0..1] priorityCode, which SHOULD be selected from ValueSet ActPriority urn:oid:2.16.840.1.113883.1.11.16866 DYNAMIC (CONF:1098-32443). |
| 133. Act.entryRelationship:entryRelationship1.observation.repeatNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-INT |
| 134. Act.entryRelationship:entryRelationship1.observation.languageCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from HumanLanguage |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
| 135. Act.entryRelationship:entryRelationship1.observation.value | |
| Control | 1..1 |
| Binding | The codes SHOULD be taken from Care Model |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| XML Representation | The type of this property is determined using the xsi:type attribute. |
| Requirements | This observation SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Care Model urn:oid:2.16.840.1.113883.11.20.9.61 DYNAMIC (CONF:1098-31611). |
| 136. Act.entryRelationship:entryRelationship1.observation.interpretationCode | |
| Control | 0..* |
| Binding | The codes SHALL be taken from ObservationInterpretation |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 137. Act.entryRelationship:entryRelationship1.observation.methodCode | |
| Control | 0..* |
| Binding | The codes SHALL be taken from ObservationMethod; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 138. Act.entryRelationship:entryRelationship1.observation.targetSiteCode | |
| Definition | Drawn from concept domain ActSite |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
| 139. Act.entryRelationship:entryRelationship1.observation.subject | |
| Control | 0..1 |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 140. Act.entryRelationship:entryRelationship1.observation.subject.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 141. Act.entryRelationship:entryRelationship1.observation.subject.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.entryRelationship.observation.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 142. Act.entryRelationship:entryRelationship1.observation.subject.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationTargetSubject |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | SBJ |
| Fixed Value | SBJ |
| 143. Act.entryRelationship:entryRelationship1.observation.subject.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 144. Act.entryRelationship:entryRelationship1.observation.subject.awarenessCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable |
| Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
| 145. Act.entryRelationship:entryRelationship1.observation.subject.relatedSubject | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject |
| 146. Act.entryRelationship:entryRelationship1.observation.specimen | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Specimen |
| 147. Act.entryRelationship:entryRelationship1.observation.performer | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
| 148. Act.entryRelationship:entryRelationship1.observation.author | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Author |
| 149. Act.entryRelationship:entryRelationship1.observation.informant | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 150. Act.entryRelationship:entryRelationship1.observation.informant.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 151. Act.entryRelationship:entryRelationship1.observation.informant.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.entryRelationship.observation.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 152. Act.entryRelationship:entryRelationship1.observation.informant.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ParticipationInformationGenerator |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | INF |
| Fixed Value | INF |
| 153. Act.entryRelationship:entryRelationship1.observation.informant.contextControlCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ContextControl |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | OP |
| Fixed Value | OP |
| 154. Act.entryRelationship:entryRelationship1.observation.informant.assignedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity |
| 155. Act.entryRelationship:entryRelationship1.observation.informant.relatedEntity | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity |
| 156. Act.entryRelationship:entryRelationship1.observation.participant | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
| 157. Act.entryRelationship:entryRelationship1.observation.entryRelationship | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) |
| 158. Act.entryRelationship:entryRelationship1.observation.entryRelationship.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 159. Act.entryRelationship:entryRelationship1.observation.entryRelationship.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.entryRelationship.observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 160. Act.entryRelationship:entryRelationship1.observation.entryRelationship.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 161. Act.entryRelationship:entryRelationship1.observation.entryRelationship.inversionInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 162. Act.entryRelationship:entryRelationship1.observation.entryRelationship.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 163. Act.entryRelationship:entryRelationship1.observation.entryRelationship.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
| 164. Act.entryRelationship:entryRelationship1.observation.entryRelationship.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 165. Act.entryRelationship:entryRelationship1.observation.entryRelationship.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 166. Act.entryRelationship:entryRelationship1.observation.entryRelationship.observation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
| 167. Act.entryRelationship:entryRelationship1.observation.entryRelationship.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 168. Act.entryRelationship:entryRelationship1.observation.entryRelationship.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 169. Act.entryRelationship:entryRelationship1.observation.entryRelationship.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 170. Act.entryRelationship:entryRelationship1.observation.entryRelationship.supply | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 171. Act.entryRelationship:entryRelationship1.observation.entryRelationship.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 172. Act.entryRelationship:entryRelationship1.observation.entryRelationship.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 173. Act.entryRelationship:entryRelationship1.observation.entryRelationship.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 174. Act.entryRelationship:entryRelationship1.observation.entryRelationship.act | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
| 175. Act.entryRelationship:entryRelationship1.observation.reference | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 176. Act.entryRelationship:entryRelationship1.observation.reference.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 177. Act.entryRelationship:entryRelationship1.observation.reference.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.entryRelationship.observation.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 178. Act.entryRelationship:entryRelationship1.observation.reference.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 179. Act.entryRelationship:entryRelationship1.observation.reference.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 180. Act.entryRelationship:entryRelationship1.observation.reference.externalAct | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalAct |
| 181. Act.entryRelationship:entryRelationship1.observation.reference.externalObservation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation |
| 182. Act.entryRelationship:entryRelationship1.observation.reference.externalProcedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure |
| 183. Act.entryRelationship:entryRelationship1.observation.reference.externalDocument | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument |
| 184. Act.entryRelationship:entryRelationship1.observation.precondition | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Precondition |
| 185. Act.entryRelationship:entryRelationship1.observation.referenceRange | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 186. Act.entryRelationship:entryRelationship1.observation.referenceRange.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 187. Act.entryRelationship:entryRelationship1.observation.referenceRange.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.entryRelationship.observation.referenceRange.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 188. Act.entryRelationship:entryRelationship1.observation.referenceRange.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActRelationshipPertains |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | REFV |
| Fixed Value | REFV |
| 189. Act.entryRelationship:entryRelationship1.observation.referenceRange.observationRange | |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationRange |
| 190. Act.entryRelationship:entryRelationship1.regionOfInterest | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 191. Act.entryRelationship:entryRelationship1.observationMedia | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 192. Act.entryRelationship:entryRelationship1.substanceAdministration | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 193. Act.entryRelationship:entryRelationship1.supply | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 194. Act.entryRelationship:entryRelationship1.procedure | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 195. Act.entryRelationship:entryRelationship1.encounter | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 196. Act.entryRelationship:entryRelationship1.organizer | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 197. Act.entryRelationship:entryRelationship1.act | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
| 198. Act.entryRelationship:indication | |
| SliceName | indication |
| Control | 0..* |
| Type | Element |
| Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-31635) such that it |
| Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 199. Act.entryRelationship:indication.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 200. Act.entryRelationship:indication.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 201. Act.entryRelationship:indication.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Requirements | SHALL contain exactly one [1..1] @typeCode="RSON" has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31636). |
| Pattern Value | RSON |
| 202. Act.entryRelationship:indication.inversionInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 203. Act.entryRelationship:indication.contextConductionInd | |
| Control | 1..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 204. Act.entryRelationship:indication.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
| 205. Act.entryRelationship:indication.negationInd | |
| Control | 0..1 |
| Type | boolean |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 206. Act.entryRelationship:indication.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 207. Act.entryRelationship:indication.observation | |
| Definition | Base definition for all types defined in FHIR type system. |
| Control | 1..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Observation(Indication) |
| Requirements | SHALL contain exactly one [1..1] Indication (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:1098-32634). |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 208. Act.entryRelationship:indication.regionOfInterest | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
| 209. Act.entryRelationship:indication.observationMedia | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
| 210. Act.entryRelationship:indication.substanceAdministration | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
| 211. Act.entryRelationship:indication.supply | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
| 212. Act.entryRelationship:indication.procedure | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
| 213. Act.entryRelationship:indication.encounter | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
| 214. Act.entryRelationship:indication.organizer | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
| 215. Act.entryRelationship:indication.act | |
| Control | 0..0 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
| 216. Act.reference | |
| Control | 0..* |
| Type | Element |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 217. Act.reference.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 218. Act.reference.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Act.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 219. Act.reference.typeCode | |
| Control | 1..1 |
| Type | code |
| XML Representation | In the XML format, this property is represented as an attribute. |
| 220. Act.reference.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
| 221. Act.reference.externalAct | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalAct |
| 222. Act.reference.externalObservation | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation |
| 223. Act.reference.externalProcedure | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure |
| 224. Act.reference.externalDocument | |
| Control | 0..1 |
| Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument |
| 225. Act.precondition | |
| Control | 0..* |
| Type | http://hl7.org/fhir/cda/StructureDefinition/Precondition |
IG © 2019+ Health Level Seven. Package hl7.cda.us.ccda#2.1.0-draft1 based on FHIR 5.0.0-snapshot3. Generated 2023-01-16
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change