This page is part of the CCDA: Consolidated CDA Release (v2.1.0-draft1: CCDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions
Active as of 2023-01-16 |
Definitions for the 2.16.840.1.113883.10.20.22.4.130 resource profile.
Guidance on how to interpret the contents of this table can be found here.
1. Act | |
2. Act.classCode | |
Requirements | SHALL contain exactly one [1..1] @classCode="ACT" act (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-30385). |
Pattern Value | ACT |
3. Act.moodCode | |
Binding | The codes SHALL be taken from Planned moodCode (Act/Encounter/Procedure)For codes, see (unbound) |
Requirements | SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (Act/Encounter/Procedure) urn:oid:2.16.840.1.113883.11.20.9.23 STATIC 2014-09-01 (CONF:1098-30386). |
4. Act.templateId | |
Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
5. Act.templateId:primary | |
SliceName | primary |
Control | 1..1 |
Requirements | SHALL contain exactly one [1..1] templateId (CONF:1098-30340) such that it |
6. Act.templateId:primary.root | |
Control | 1..1 |
Requirements | SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.130" (CONF:1098-30341). |
Pattern Value | 2.16.840.1.113883.10.20.22.4.130 |
7. Act.code | |
Binding | The codes SHOULD be taken from Nutrition RecommendationsThe codes SHALL be taken from v3 Code System ActCode; other codes may be used where these codes are not suitable |
Requirements | SHALL contain exactly one [1..1] code, which SHOULD be selected from ValueSet Nutrition Recommendations urn:oid:2.16.840.1.113883.1.11.20.2.9 DYNAMIC (CONF:1098-30342). |
8. Act.statusCode | |
Control | 10..1 |
Requirements | SHALL contain exactly one [1..1] statusCode (CONF:1098-31697). |
9. Act.statusCode.code | |
Control | 1..1 |
Requirements | This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31698). |
Pattern Value | active |
10. Act.effectiveTime | |
Requirements | SHOULD contain zero or one [0..1] effectiveTime (CONF:1098-31699). |
11. Act.entryRelationship | |
Slicing | This element introduces a set of slices on Act.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
12. Act.entryRelationship:plannedEncounter | |
SliceName | plannedEncounter |
Control | 0..* |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32382) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
13. Act.entryRelationship:plannedEncounter.typeCode | |
Control | 1..1 |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32928). |
Pattern Value | REFR |
14. Act.entryRelationship:plannedEncounter.encounter | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter(PlannedEncounter) |
Requirements | SHALL contain exactly one [1..1] Planned Encounter (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.40:2014-06-09) (CONF:1098-32383). |
15. Act.entryRelationship:plannedMedActivity | |
SliceName | plannedMedActivity |
Control | 0..* |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32384) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
16. Act.entryRelationship:plannedMedActivity.typeCode | |
Control | 1..1 |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32929). |
Pattern Value | REFR |
17. Act.entryRelationship:plannedMedActivity.substanceAdministration | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration(PlannedMedicationActivity) |
Requirements | SHALL contain exactly one [1..1] Planned Medication Activity (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.42:2014-06-09) (CONF:1098-32385). |
18. Act.entryRelationship:plannedObs | |
SliceName | plannedObs |
Control | 0..* |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32386) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
19. Act.entryRelationship:plannedObs.typeCode | |
Control | 1..1 |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32930). |
Pattern Value | REFR |
20. Act.entryRelationship:plannedObs.observation | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation(PlannedObservation) |
Requirements | SHALL contain exactly one [1..1] Planned Observation (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.44:2014-06-09) (CONF:1098-32387). |
21. Act.entryRelationship:plannedProc | |
SliceName | plannedProc |
Control | 0..* |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32388) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
22. Act.entryRelationship:plannedProc.typeCode | |
Control | 1..1 |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32931). |
Pattern Value | REFR |
23. Act.entryRelationship:plannedProc.procedure | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure(PlannedProcedure) |
Requirements | SHALL contain exactly one [1..1] Planned Procedure (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.41:2014-06-09) (CONF:1098-32389). |
24. Act.entryRelationship:plannedSupply | |
SliceName | plannedSupply |
Control | 0..* |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32390) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
25. Act.entryRelationship:plannedSupply.typeCode | |
Control | 1..1 |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32932). |
Pattern Value | REFR |
26. Act.entryRelationship:plannedSupply.supply | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply(PlannedSupply) |
Requirements | SHALL contain exactly one [1..1] Planned Supply (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.43:2014-06-09) (CONF:1098-32391). |
27. Act.entryRelationship:plannedAct | |
SliceName | plannedAct |
Control | 0..* |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32632) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
28. Act.entryRelationship:plannedAct.typeCode | |
Control | 1..1 |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32933). |
Pattern Value | REFR |
29. Act.entryRelationship:plannedAct.act | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act(PlannedAct) |
Requirements | SHALL contain exactly one [1..1] Planned Act (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.39:2014-06-09) (CONF:1098-32633). |
Guidance on how to interpret the contents of this table can be found here.
1. Act | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 10..1* |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
2. Act.classCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @classCode="ACT" act (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-30385). |
Pattern Value | ACT |
3. Act.moodCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from Planned moodCode (Act/Encounter/Procedure) |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (Act/Encounter/Procedure) urn:oid:2.16.840.1.113883.11.20.9.23 STATIC 2014-09-01 (CONF:1098-30386). |
4. Act.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
5. Act.templateId:primary | |
SliceName | primary |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Requirements | SHALL contain exactly one [1..1] templateId (CONF:1098-30340) such that it |
6. Act.templateId:primary.root | |
Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
Control | 1..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.130" (CONF:1098-30341). |
Pattern Value | 2.16.840.1.113883.10.20.22.4.130 |
7. Act.code | |
Control | 1..1 |
Binding | The codes SHOULD be taken from Nutrition Recommendations |
Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
Requirements | SHALL contain exactly one [1..1] code, which SHOULD be selected from ValueSet Nutrition Recommendations urn:oid:2.16.840.1.113883.1.11.20.2.9 DYNAMIC (CONF:1098-30342). |
8. Act.statusCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ActStatus |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
Requirements | SHALL contain exactly one [1..1] statusCode (CONF:1098-31697). |
9. Act.statusCode.code | |
Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
Control | 1..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31698). |
Pattern Value | active |
10. Act.statusCode.codeSystem | |
Definition | Specifies the code system that defines the code. |
Control | 0..0 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
11. Act.statusCode.codeSystemName | |
Definition | The common name of the coding system. |
Control | 0..0 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
12. Act.statusCode.codeSystemVersion | |
Definition | If applicable, a version descriptor defined specifically for the given code system. |
Control | 0..0 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
13. Act.statusCode.displayName | |
Definition | A name or title for the code, under which the sending system shows the code value to its users. |
Control | 0..0 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
14. Act.statusCode.originalText | |
Definition | The text or phrase used as the basis for the coding. |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
15. Act.statusCode.qualifier | |
Definition | Specifies additional codes that increase the specificity of the the primary code. |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/CR |
16. Act.statusCode.translation | |
Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
XML Representation | The type of this property is determined using the xsi:type attribute. |
17. Act.effectiveTime | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
Requirements | SHOULD contain zero or one [0..1] effectiveTime (CONF:1098-31699). |
18. Act.entryRelationship | |
Control | 0..* |
Type | Element |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Act.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
19. Act.entryRelationship.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
20. Act.entryRelationship.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
21. Act.entryRelationship:plannedEncounter | |
SliceName | plannedEncounter |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32382) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
22. Act.entryRelationship:plannedEncounter.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32928). |
Pattern Value | REFR |
23. Act.entryRelationship:plannedEncounter.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
24. Act.entryRelationship:plannedEncounter.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
25. Act.entryRelationship:plannedEncounter.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
26. Act.entryRelationship:plannedEncounter.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
27. Act.entryRelationship:plannedEncounter.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
28. Act.entryRelationship:plannedEncounter.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
29. Act.entryRelationship:plannedEncounter.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
30. Act.entryRelationship:plannedEncounter.encounter | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter(PlannedEncounter) |
Requirements | SHALL contain exactly one [1..1] Planned Encounter (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.40:2014-06-09) (CONF:1098-32383). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
31. Act.entryRelationship:plannedEncounter.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
32. Act.entryRelationship:plannedEncounter.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
33. Act.entryRelationship:plannedMedActivity | |
SliceName | plannedMedActivity |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32384) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
34. Act.entryRelationship:plannedMedActivity.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32929). |
Pattern Value | REFR |
35. Act.entryRelationship:plannedMedActivity.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
36. Act.entryRelationship:plannedMedActivity.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
37. Act.entryRelationship:plannedMedActivity.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
38. Act.entryRelationship:plannedMedActivity.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
39. Act.entryRelationship:plannedMedActivity.substanceAdministration | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration(PlannedMedicationActivity) |
Requirements | SHALL contain exactly one [1..1] Planned Medication Activity (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.42:2014-06-09) (CONF:1098-32385). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
40. Act.entryRelationship:plannedMedActivity.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
41. Act.entryRelationship:plannedMedActivity.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
42. Act.entryRelationship:plannedMedActivity.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
43. Act.entryRelationship:plannedMedActivity.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
44. Act.entryRelationship:plannedMedActivity.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
45. Act.entryRelationship:plannedObs | |
SliceName | plannedObs |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32386) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
46. Act.entryRelationship:plannedObs.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32930). |
Pattern Value | REFR |
47. Act.entryRelationship:plannedObs.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
48. Act.entryRelationship:plannedObs.observation | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation(PlannedObservation) |
Requirements | SHALL contain exactly one [1..1] Planned Observation (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.44:2014-06-09) (CONF:1098-32387). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
49. Act.entryRelationship:plannedObs.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
50. Act.entryRelationship:plannedObs.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
51. Act.entryRelationship:plannedObs.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
52. Act.entryRelationship:plannedObs.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
53. Act.entryRelationship:plannedObs.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
54. Act.entryRelationship:plannedObs.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
55. Act.entryRelationship:plannedObs.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
56. Act.entryRelationship:plannedObs.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
57. Act.entryRelationship:plannedProc | |
SliceName | plannedProc |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32388) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
58. Act.entryRelationship:plannedProc.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32931). |
Pattern Value | REFR |
59. Act.entryRelationship:plannedProc.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
60. Act.entryRelationship:plannedProc.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
61. Act.entryRelationship:plannedProc.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
62. Act.entryRelationship:plannedProc.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
63. Act.entryRelationship:plannedProc.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
64. Act.entryRelationship:plannedProc.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
65. Act.entryRelationship:plannedProc.procedure | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure(PlannedProcedure) |
Requirements | SHALL contain exactly one [1..1] Planned Procedure (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.41:2014-06-09) (CONF:1098-32389). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
66. Act.entryRelationship:plannedProc.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
67. Act.entryRelationship:plannedProc.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
68. Act.entryRelationship:plannedProc.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
69. Act.entryRelationship:plannedSupply | |
SliceName | plannedSupply |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32390) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
70. Act.entryRelationship:plannedSupply.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32932). |
Pattern Value | REFR |
71. Act.entryRelationship:plannedSupply.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
72. Act.entryRelationship:plannedSupply.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
73. Act.entryRelationship:plannedSupply.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
74. Act.entryRelationship:plannedSupply.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
75. Act.entryRelationship:plannedSupply.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
76. Act.entryRelationship:plannedSupply.supply | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply(PlannedSupply) |
Requirements | SHALL contain exactly one [1..1] Planned Supply (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.43:2014-06-09) (CONF:1098-32391). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
77. Act.entryRelationship:plannedSupply.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
78. Act.entryRelationship:plannedSupply.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
79. Act.entryRelationship:plannedSupply.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
80. Act.entryRelationship:plannedSupply.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
81. Act.entryRelationship:plannedAct | |
SliceName | plannedAct |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32632) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
82. Act.entryRelationship:plannedAct.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32933). |
Pattern Value | REFR |
83. Act.entryRelationship:plannedAct.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
84. Act.entryRelationship:plannedAct.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
85. Act.entryRelationship:plannedAct.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
86. Act.entryRelationship:plannedAct.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
87. Act.entryRelationship:plannedAct.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
88. Act.entryRelationship:plannedAct.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
89. Act.entryRelationship:plannedAct.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
90. Act.entryRelationship:plannedAct.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
91. Act.entryRelationship:plannedAct.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
92. Act.entryRelationship:plannedAct.act | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act(PlannedAct) |
Requirements | SHALL contain exactly one [1..1] Planned Act (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.39:2014-06-09) (CONF:1098-32633). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here.
1. Act | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
2. Act.classCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @classCode="ACT" act (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-30385). |
Pattern Value | ACT |
3. Act.moodCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from Planned moodCode (Act/Encounter/Procedure) |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @moodCode, which SHALL be selected from ValueSet Planned moodCode (Act/Encounter/Procedure) urn:oid:2.16.840.1.113883.11.20.9.23 STATIC 2014-09-01 (CONF:1098-30386). |
4. Act.realmCode | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
5. Act.typeId | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
6. Act.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
7. Act.templateId:primary | |
SliceName | primary |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Requirements | SHALL contain exactly one [1..1] templateId (CONF:1098-30340) such that it |
8. Act.templateId:primary.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from NullFlavor |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
9. Act.templateId:primary.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
10. Act.templateId:primary.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
11. Act.templateId:primary.root | |
Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
Control | 1..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.130" (CONF:1098-30341). |
Pattern Value | 2.16.840.1.113883.10.20.22.4.130 |
12. Act.templateId:primary.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
13. Act.id | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
14. Act.code | |
Control | 1..1 |
Binding | The codes SHOULD be taken from Nutrition Recommendations |
Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
Requirements | SHALL contain exactly one [1..1] code, which SHOULD be selected from ValueSet Nutrition Recommendations urn:oid:2.16.840.1.113883.1.11.20.2.9 DYNAMIC (CONF:1098-30342). |
15. Act.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
16. Act.text | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
17. Act.statusCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ActStatus |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
Requirements | SHALL contain exactly one [1..1] statusCode (CONF:1098-31697). |
18. Act.statusCode.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from NullFlavor |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
19. Act.statusCode.code | |
Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
Control | 1..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | This statusCode SHALL contain exactly one [1..1] @code="active" Active (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-31698). |
Pattern Value | active |
20. Act.statusCode.codeSystem | |
Definition | Specifies the code system that defines the code. |
Control | 0..0 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
21. Act.statusCode.codeSystemName | |
Definition | The common name of the coding system. |
Control | 0..0 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
22. Act.statusCode.codeSystemVersion | |
Definition | If applicable, a version descriptor defined specifically for the given code system. |
Control | 0..0 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
23. Act.statusCode.displayName | |
Definition | A name or title for the code, under which the sending system shows the code value to its users. |
Control | 0..0 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
24. Act.statusCode.sdtcValueSet | |
Definition | The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual name valueSet . |
25. Act.statusCode.sdtcValueSetVersion | |
Definition | The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual name valueSetVersion . |
26. Act.statusCode.originalText | |
Definition | The text or phrase used as the basis for the coding. |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
27. Act.statusCode.qualifier | |
Definition | Specifies additional codes that increase the specificity of the the primary code. |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/CR |
28. Act.statusCode.translation | |
Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
XML Representation | The type of this property is determined using the xsi:type attribute. |
29. Act.effectiveTime | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
Requirements | SHOULD contain zero or one [0..1] effectiveTime (CONF:1098-31699). |
30. Act.priorityCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
31. Act.languageCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from HumanLanguage |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
32. Act.subject | |
Control | 0..1 |
Type | Element |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
33. Act.subject.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
34. Act.subject.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
35. Act.subject.typeCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ParticipationTargetSubject |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | SBJ |
Fixed Value | SBJ |
36. Act.subject.contextControlCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ContextControl |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | OP |
Fixed Value | OP |
37. Act.subject.awarenessCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
38. Act.subject.relatedSubject | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject |
39. Act.specimen | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Specimen |
40. Act.performer | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
41. Act.author | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Author |
42. Act.informant | |
Control | 0..* |
Type | Element |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
43. Act.informant.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
44. Act.informant.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
45. Act.informant.typeCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ParticipationInformationGenerator |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | INF |
Fixed Value | INF |
46. Act.informant.contextControlCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ContextControl |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | OP |
Fixed Value | OP |
47. Act.informant.assignedEntity | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity |
48. Act.informant.relatedEntity | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity |
49. Act.participant | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
50. Act.entryRelationship | |
Control | 0..* |
Type | Element |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Act.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
51. Act.entryRelationship.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
52. Act.entryRelationship.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
53. Act.entryRelationship.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
54. Act.entryRelationship.inversionInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
55. Act.entryRelationship.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
56. Act.entryRelationship.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
57. Act.entryRelationship.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
58. Act.entryRelationship.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
59. Act.entryRelationship.observation | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
60. Act.entryRelationship.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
61. Act.entryRelationship.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
62. Act.entryRelationship.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
63. Act.entryRelationship.supply | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
64. Act.entryRelationship.procedure | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
65. Act.entryRelationship.encounter | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
66. Act.entryRelationship.organizer | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
67. Act.entryRelationship.act | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
68. Act.entryRelationship:plannedEncounter | |
SliceName | plannedEncounter |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32382) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
69. Act.entryRelationship:plannedEncounter.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
70. Act.entryRelationship:plannedEncounter.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
71. Act.entryRelationship:plannedEncounter.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32928). |
Pattern Value | REFR |
72. Act.entryRelationship:plannedEncounter.inversionInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
73. Act.entryRelationship:plannedEncounter.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
74. Act.entryRelationship:plannedEncounter.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
75. Act.entryRelationship:plannedEncounter.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
76. Act.entryRelationship:plannedEncounter.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
77. Act.entryRelationship:plannedEncounter.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
78. Act.entryRelationship:plannedEncounter.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
79. Act.entryRelationship:plannedEncounter.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
80. Act.entryRelationship:plannedEncounter.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
81. Act.entryRelationship:plannedEncounter.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
82. Act.entryRelationship:plannedEncounter.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
83. Act.entryRelationship:plannedEncounter.encounter | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter(PlannedEncounter) |
Requirements | SHALL contain exactly one [1..1] Planned Encounter (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.40:2014-06-09) (CONF:1098-32383). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
84. Act.entryRelationship:plannedEncounter.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
85. Act.entryRelationship:plannedEncounter.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
86. Act.entryRelationship:plannedMedActivity | |
SliceName | plannedMedActivity |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32384) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
87. Act.entryRelationship:plannedMedActivity.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
88. Act.entryRelationship:plannedMedActivity.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
89. Act.entryRelationship:plannedMedActivity.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32929). |
Pattern Value | REFR |
90. Act.entryRelationship:plannedMedActivity.inversionInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
91. Act.entryRelationship:plannedMedActivity.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
92. Act.entryRelationship:plannedMedActivity.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
93. Act.entryRelationship:plannedMedActivity.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
94. Act.entryRelationship:plannedMedActivity.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
95. Act.entryRelationship:plannedMedActivity.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
96. Act.entryRelationship:plannedMedActivity.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
97. Act.entryRelationship:plannedMedActivity.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
98. Act.entryRelationship:plannedMedActivity.substanceAdministration | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration(PlannedMedicationActivity) |
Requirements | SHALL contain exactly one [1..1] Planned Medication Activity (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.42:2014-06-09) (CONF:1098-32385). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
99. Act.entryRelationship:plannedMedActivity.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
100. Act.entryRelationship:plannedMedActivity.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
101. Act.entryRelationship:plannedMedActivity.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
102. Act.entryRelationship:plannedMedActivity.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
103. Act.entryRelationship:plannedMedActivity.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
104. Act.entryRelationship:plannedObs | |
SliceName | plannedObs |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32386) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
105. Act.entryRelationship:plannedObs.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
106. Act.entryRelationship:plannedObs.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
107. Act.entryRelationship:plannedObs.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32930). |
Pattern Value | REFR |
108. Act.entryRelationship:plannedObs.inversionInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
109. Act.entryRelationship:plannedObs.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
110. Act.entryRelationship:plannedObs.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
111. Act.entryRelationship:plannedObs.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
112. Act.entryRelationship:plannedObs.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
113. Act.entryRelationship:plannedObs.observation | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation(PlannedObservation) |
Requirements | SHALL contain exactly one [1..1] Planned Observation (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.44:2014-06-09) (CONF:1098-32387). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
114. Act.entryRelationship:plannedObs.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
115. Act.entryRelationship:plannedObs.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
116. Act.entryRelationship:plannedObs.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
117. Act.entryRelationship:plannedObs.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
118. Act.entryRelationship:plannedObs.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
119. Act.entryRelationship:plannedObs.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
120. Act.entryRelationship:plannedObs.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
121. Act.entryRelationship:plannedObs.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
122. Act.entryRelationship:plannedProc | |
SliceName | plannedProc |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32388) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
123. Act.entryRelationship:plannedProc.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
124. Act.entryRelationship:plannedProc.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
125. Act.entryRelationship:plannedProc.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32931). |
Pattern Value | REFR |
126. Act.entryRelationship:plannedProc.inversionInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
127. Act.entryRelationship:plannedProc.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
128. Act.entryRelationship:plannedProc.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
129. Act.entryRelationship:plannedProc.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
130. Act.entryRelationship:plannedProc.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
131. Act.entryRelationship:plannedProc.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
132. Act.entryRelationship:plannedProc.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
133. Act.entryRelationship:plannedProc.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
134. Act.entryRelationship:plannedProc.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
135. Act.entryRelationship:plannedProc.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
136. Act.entryRelationship:plannedProc.procedure | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure(PlannedProcedure) |
Requirements | SHALL contain exactly one [1..1] Planned Procedure (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.41:2014-06-09) (CONF:1098-32389). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
137. Act.entryRelationship:plannedProc.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
138. Act.entryRelationship:plannedProc.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
139. Act.entryRelationship:plannedProc.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
140. Act.entryRelationship:plannedSupply | |
SliceName | plannedSupply |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32390) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
141. Act.entryRelationship:plannedSupply.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
142. Act.entryRelationship:plannedSupply.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
143. Act.entryRelationship:plannedSupply.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32932). |
Pattern Value | REFR |
144. Act.entryRelationship:plannedSupply.inversionInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
145. Act.entryRelationship:plannedSupply.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
146. Act.entryRelationship:plannedSupply.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
147. Act.entryRelationship:plannedSupply.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
148. Act.entryRelationship:plannedSupply.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
149. Act.entryRelationship:plannedSupply.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
150. Act.entryRelationship:plannedSupply.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
151. Act.entryRelationship:plannedSupply.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
152. Act.entryRelationship:plannedSupply.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
153. Act.entryRelationship:plannedSupply.supply | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply(PlannedSupply) |
Requirements | SHALL contain exactly one [1..1] Planned Supply (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.43:2014-06-09) (CONF:1098-32391). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
154. Act.entryRelationship:plannedSupply.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
155. Act.entryRelationship:plannedSupply.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
156. Act.entryRelationship:plannedSupply.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
157. Act.entryRelationship:plannedSupply.act | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
158. Act.entryRelationship:plannedAct | |
SliceName | plannedAct |
Control | 0..* |
Type | Element |
Requirements | MAY contain zero or more [0..*] entryRelationship (CONF:1098-32632) such that it |
Comments | STU Comment 1501: Updated to add "such that it" |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
159. Act.entryRelationship:plannedAct.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
160. Act.entryRelationship:plannedAct.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
161. Act.entryRelationship:plannedAct.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Requirements | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32933). |
Pattern Value | REFR |
162. Act.entryRelationship:plannedAct.inversionInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
163. Act.entryRelationship:plannedAct.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
164. Act.entryRelationship:plannedAct.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
165. Act.entryRelationship:plannedAct.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
166. Act.entryRelationship:plannedAct.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
167. Act.entryRelationship:plannedAct.observation | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
168. Act.entryRelationship:plannedAct.regionOfInterest | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
169. Act.entryRelationship:plannedAct.observationMedia | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
170. Act.entryRelationship:plannedAct.substanceAdministration | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
171. Act.entryRelationship:plannedAct.supply | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
172. Act.entryRelationship:plannedAct.procedure | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
173. Act.entryRelationship:plannedAct.encounter | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
174. Act.entryRelationship:plannedAct.organizer | |
Control | 0..0 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
175. Act.entryRelationship:plannedAct.act | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act(PlannedAct) |
Requirements | SHALL contain exactly one [1..1] Planned Act (V2) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.39:2014-06-09) (CONF:1098-32633). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
176. Act.reference | |
Control | 0..* |
Type | Element |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
177. Act.reference.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
178. Act.reference.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
179. Act.reference.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
180. Act.reference.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
181. Act.reference.externalAct | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalAct |
182. Act.reference.externalObservation | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation |
183. Act.reference.externalProcedure | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure |
184. Act.reference.externalDocument | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument |
185. Act.precondition | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Precondition |