Consolidated CDA Release 2.1 StructureDefinition Prototype Publication
2.1.0-draft1 - CI Build United States of America

This page is part of the CCDA: Consolidated CDA Release (v2.1.0-draft1: CCDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions

Resource Profile: GoalObservation - Detailed Descriptions

Active as of 2023-01-16

Definitions for the 2.16.840.1.113883.10.20.22.4.121 resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. Observation
2. Observation.classCode
Requirements

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-30418).

Pattern ValueOBS
3. Observation.moodCode
Requirements

SHALL contain exactly one [1..1] @moodCode="GOL" Goal (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1098-30419).

Pattern ValueGOL
4. Observation.templateId
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
5. Observation.templateId:primary
SliceNameprimary
Control1..1
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1098-8583) such that it

6. Observation.templateId:primary.root
Control1..1
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.121" (CONF:1098-10512).

Pattern Value2.16.840.1.113883.10.20.22.4.121
7. Observation.id
Control10..*
Requirements

SHALL contain at least one [1..*] id (CONF:1098-32332).

8. Observation.code
Requirements

SHALL contain exactly one [1..1] code, which SHOULD be selected from CodeSystem LOINC (urn:oid:2.16.840.1.113883.6.1) (CONF:1098-30784).

9. Observation.statusCode
Control10..1
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1098-32333).

10. Observation.statusCode.code
Control1..1
Requirements

This statusCode SHALL contain exactly one [1..1] @code="active" (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-32334).

Pattern Valueactive
11. Observation.effectiveTime
Requirements

SHOULD contain zero or one [0..1] effectiveTime (CONF:1098-32335).

12. Observation.value
Control0..1*
Requirements

MAY contain zero or one [0..1] value (CONF:1098-32743).

13. Observation.author
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-30995).

14. Observation.entryRelationship
SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ act
  • profile @ act,
15. Observation.entryRelationship:healthConcern
SliceNamehealthConcern
Control0..*
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-30701) such that it

16. Observation.entryRelationship:healthConcern.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30702).

Pattern ValueREFR
17. Observation.entryRelationship:healthConcern.act
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-30703).

18. Observation.entryRelationship:plannedComponent
SliceNameplannedComponent
Control0..*
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-30704) such that it

19. Observation.entryRelationship:plannedComponent.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30705).

Pattern ValueCOMP
20. Observation.entryRelationship:plannedComponent.act
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-32879).

21. Observation.entryRelationship:priority
SliceNamepriority
Control0..1
Requirements

SHOULD contain zero or one [0..1] entryRelationship (CONF:1098-30785) such that it

22. Observation.entryRelationship:priority.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30786).

Pattern ValueREFR
23. Observation.entryRelationship:priority.observation
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1098-30787).

24. Observation.entryRelationship:goal
SliceNamegoal
Control0..*
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31448) such that it

25. Observation.entryRelationship:goal.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31449).

Pattern ValueCOMP
26. Observation.entryRelationship:goal.observation
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(GoalObservation)
Requirements

SHALL contain exactly one [1..1] Goal Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.121) (CONF:1098-32880).

27. Observation.entryRelationship:entryReference
SliceNameentryReference
Control0..*
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31559) such that it

28. Observation.entryRelationship:entryReference.typeCode
Control1..1
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31560).

Pattern ValueREFR
29. Observation.entryRelationship:entryReference.act
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-31588).

30. Observation.reference
Requirements

MAY contain zero or more [0..*] reference (CONF:1098-32754).

31. Observation.reference.typeCode
Requirements

The reference, if present, SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32755).

Pattern ValueREFR
32. Observation.reference.externalDocument
Control10..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument(ExternalDocumentReference)
Requirements

The reference, if present, SHALL contain exactly one [1..1] External Document Reference (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.115:2014-06-09) (CONF:1098-32756).

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Definition

Base definition for all types defined in FHIR type system.

Control10..1*
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
2. Observation.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassObservation
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-30418).

Pattern ValueOBS
3. Observation.moodCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @moodCode="GOL" Goal (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1098-30419).

Pattern ValueGOL
4. Observation.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
5. Observation.templateId:primary
SliceNameprimary
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1098-8583) such that it

6. Observation.templateId:primary.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.121" (CONF:1098-10512).

Pattern Value2.16.840.1.113883.10.20.22.4.121
7. Observation.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control10..*1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IIid
Requirements

SHALL contain at least one [1..*] id (CONF:1098-32332).

Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

8. Observation.code
Definition

Describes what was observed. Sometimes this is called the observation "name".

Control1..1
BindingThe codes SHALL be taken from ObservationType; other codes may be used where these codes are not suitableFor example codes, see LOINCCodes
Typehttp://hl7.org/fhir/cda/StructureDefinition/CDCodeableConcept
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

SHALL contain exactly one [1..1] code, which SHOULD be selected from CodeSystem LOINC (urn:oid:2.16.840.1.113883.6.1) (CONF:1098-30784).

Knowing what kind of observation is being made is essential to understanding the observation.

Alternate NamesName
Comments

All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

9. Observation.statusCode
Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1098-32333).

10. Observation.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

This statusCode SHALL contain exactly one [1..1] @code="active" (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-32334).

Pattern Valueactive
11. Observation.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
12. Observation.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
13. Observation.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
14. Observation.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
15. Observation.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
16. Observation.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
17. Observation.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
18. Observation.effectiveTime
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-TS
Requirements

SHOULD contain zero or one [0..1] effectiveTime (CONF:1098-32335).

19. Observation.value
Control0..1
TypeChoice of: http://hl7.org/fhir/cda/StructureDefinition/BL, http://hl7.org/fhir/cda/StructureDefinition/ED, http://hl7.org/fhir/cda/StructureDefinition/ST, http://hl7.org/fhir/cda/StructureDefinition/CD, http://hl7.org/fhir/cda/StructureDefinition/CV, http://hl7.org/fhir/cda/StructureDefinition/CE, http://hl7.org/fhir/cda/StructureDefinition/SC, http://hl7.org/fhir/cda/StructureDefinition/II, http://hl7.org/fhir/cda/StructureDefinition/TEL, http://hl7.org/fhir/cda/StructureDefinition/AD, http://hl7.org/fhir/cda/StructureDefinition/EN, http://hl7.org/fhir/cda/StructureDefinition/INT, http://hl7.org/fhir/cda/StructureDefinition/REAL, http://hl7.org/fhir/cda/StructureDefinition/PQ, http://hl7.org/fhir/cda/StructureDefinition/MO, http://hl7.org/fhir/cda/StructureDefinition/TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-PQ, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS, http://hl7.org/fhir/cda/StructureDefinition/RTO-PQ-PQ
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

MAY contain zero or one [0..1] value (CONF:1098-32743).

20. Observation.author
Definition

Base definition for all types defined in FHIR type system.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-30995).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. Observation.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ act
  • profile @ act,
22. Observation.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
23. Observation.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
24. Observation.entryRelationship:healthConcern
SliceNamehealthConcern
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-30701) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
25. Observation.entryRelationship:healthConcern.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30702).

Pattern ValueREFR
26. Observation.entryRelationship:healthConcern.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
27. Observation.entryRelationship:healthConcern.observation
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
28. Observation.entryRelationship:healthConcern.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
29. Observation.entryRelationship:healthConcern.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
30. Observation.entryRelationship:healthConcern.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
31. Observation.entryRelationship:healthConcern.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
32. Observation.entryRelationship:healthConcern.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
33. Observation.entryRelationship:healthConcern.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
34. Observation.entryRelationship:healthConcern.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
35. Observation.entryRelationship:healthConcern.act
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-30703).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. Observation.entryRelationship:plannedComponent
SliceNameplannedComponent
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-30704) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
37. Observation.entryRelationship:plannedComponent.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30705).

Pattern ValueCOMP
38. Observation.entryRelationship:plannedComponent.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
39. Observation.entryRelationship:plannedComponent.observation
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
40. Observation.entryRelationship:plannedComponent.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
41. Observation.entryRelationship:plannedComponent.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
42. Observation.entryRelationship:plannedComponent.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
43. Observation.entryRelationship:plannedComponent.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
44. Observation.entryRelationship:plannedComponent.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
45. Observation.entryRelationship:plannedComponent.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
46. Observation.entryRelationship:plannedComponent.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
47. Observation.entryRelationship:plannedComponent.act
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-32879).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. Observation.entryRelationship:priority
SliceNamepriority
Control0..1
TypeElement
Requirements

SHOULD contain zero or one [0..1] entryRelationship (CONF:1098-30785) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
49. Observation.entryRelationship:priority.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30786).

Pattern ValueREFR
50. Observation.entryRelationship:priority.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
51. Observation.entryRelationship:priority.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1098-30787).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. Observation.entryRelationship:priority.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
53. Observation.entryRelationship:priority.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
54. Observation.entryRelationship:priority.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
55. Observation.entryRelationship:priority.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
56. Observation.entryRelationship:priority.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
57. Observation.entryRelationship:priority.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
58. Observation.entryRelationship:priority.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
59. Observation.entryRelationship:priority.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
60. Observation.entryRelationship:goal
SliceNamegoal
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31448) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
61. Observation.entryRelationship:goal.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31449).

Pattern ValueCOMP
62. Observation.entryRelationship:goal.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
63. Observation.entryRelationship:goal.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(GoalObservation)
Requirements

SHALL contain exactly one [1..1] Goal Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.121) (CONF:1098-32880).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
64. Observation.entryRelationship:goal.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
65. Observation.entryRelationship:goal.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
66. Observation.entryRelationship:goal.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
67. Observation.entryRelationship:goal.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
68. Observation.entryRelationship:goal.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
69. Observation.entryRelationship:goal.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
70. Observation.entryRelationship:goal.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
71. Observation.entryRelationship:goal.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
72. Observation.entryRelationship:entryReference
SliceNameentryReference
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31559) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
73. Observation.entryRelationship:entryReference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31560).

Pattern ValueREFR
74. Observation.entryRelationship:entryReference.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
75. Observation.entryRelationship:entryReference.observation
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
76. Observation.entryRelationship:entryReference.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
77. Observation.entryRelationship:entryReference.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
78. Observation.entryRelationship:entryReference.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
79. Observation.entryRelationship:entryReference.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
80. Observation.entryRelationship:entryReference.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
81. Observation.entryRelationship:entryReference.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
82. Observation.entryRelationship:entryReference.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
83. Observation.entryRelationship:entryReference.act
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-31588).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
84. Observation.reference
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] reference (CONF:1098-32754).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
85. Observation.reference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

The reference, if present, SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32755).

Pattern ValueREFR
86. Observation.reference.externalDocument
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument(ExternalDocumentReference)
Requirements

The reference, if present, SHALL contain exactly one [1..1] External Document Reference (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.115:2014-06-09) (CONF:1098-32756).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
2. Observation.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassObservation
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1098-30418).

Pattern ValueOBS
3. Observation.moodCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @moodCode="GOL" Goal (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1098-30419).

Pattern ValueGOL
4. Observation.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
5. Observation.realmCode
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
6. Observation.typeId
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
7. Observation.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
8. Observation.templateId:primary
SliceNameprimary
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain exactly one [1..1] templateId (CONF:1098-8583) such that it

9. Observation.templateId:primary.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
10. Observation.templateId:primary.assigningAuthorityName
Definition

A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
11. Observation.templateId:primary.displayable
Definition

Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
12. Observation.templateId:primary.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.121" (CONF:1098-10512).

Pattern Value2.16.840.1.113883.10.20.22.4.121
13. Observation.templateId:primary.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
14. Observation.id
Control1..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Requirements

SHALL contain at least one [1..*] id (CONF:1098-32332).

15. Observation.code
Control1..1
BindingThe codes SHALL be taken from ObservationType; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

SHALL contain exactly one [1..1] code, which SHOULD be selected from CodeSystem LOINC (urn:oid:2.16.840.1.113883.6.1) (CONF:1098-30784).

16. Observation.derivationExpr
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ST
17. Observation.text
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
XML RepresentationThe type of this property is determined using the xsi:type attribute.
18. Observation.statusCode
Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
Requirements

SHALL contain exactly one [1..1] statusCode (CONF:1098-32333).

19. Observation.statusCode.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
20. Observation.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

This statusCode SHALL contain exactly one [1..1] @code="active" (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14) (CONF:1098-32334).

Pattern Valueactive
21. Observation.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
22. Observation.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
23. Observation.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
24. Observation.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
25. Observation.statusCode.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet.
26. Observation.statusCode.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion.
27. Observation.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
28. Observation.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
29. Observation.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
30. Observation.effectiveTime
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-TS
Requirements

SHOULD contain zero or one [0..1] effectiveTime (CONF:1098-32335).

31. Observation.priorityCode
Control0..1
BindingThe codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
32. Observation.repeatNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-INT
33. Observation.languageCode
Control0..1
BindingThe codes SHALL be taken from HumanLanguage
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
34. Observation.value
Control0..1
TypeChoice of: http://hl7.org/fhir/cda/StructureDefinition/BL, http://hl7.org/fhir/cda/StructureDefinition/ED, http://hl7.org/fhir/cda/StructureDefinition/ST, http://hl7.org/fhir/cda/StructureDefinition/CD, http://hl7.org/fhir/cda/StructureDefinition/CV, http://hl7.org/fhir/cda/StructureDefinition/CE, http://hl7.org/fhir/cda/StructureDefinition/SC, http://hl7.org/fhir/cda/StructureDefinition/II, http://hl7.org/fhir/cda/StructureDefinition/TEL, http://hl7.org/fhir/cda/StructureDefinition/AD, http://hl7.org/fhir/cda/StructureDefinition/EN, http://hl7.org/fhir/cda/StructureDefinition/INT, http://hl7.org/fhir/cda/StructureDefinition/REAL, http://hl7.org/fhir/cda/StructureDefinition/PQ, http://hl7.org/fhir/cda/StructureDefinition/MO, http://hl7.org/fhir/cda/StructureDefinition/TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-PQ, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS, http://hl7.org/fhir/cda/StructureDefinition/RTO-PQ-PQ
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

MAY contain zero or one [0..1] value (CONF:1098-32743).

35. Observation.interpretationCode
Control0..*
BindingThe codes SHALL be taken from ObservationInterpretation
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
36. Observation.methodCode
Control0..*
BindingThe codes SHALL be taken from ObservationMethod; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
37. Observation.targetSiteCode
Definition

Drawn from concept domain ActSite

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
38. Observation.subject
Control0..1
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. Observation.subject.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
40. Observation.subject.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
41. Observation.subject.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetSubject
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueSBJ
Fixed ValueSBJ
42. Observation.subject.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
43. Observation.subject.awarenessCode
Control0..1
BindingThe codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
44. Observation.subject.relatedSubject
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
45. Observation.specimen
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Specimen
46. Observation.performer
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Performer2
47. Observation.author
Definition

Base definition for all types defined in FHIR type system.

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements

SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1098-30995).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. Observation.informant
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. Observation.informant.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
50. Observation.informant.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
51. Observation.informant.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationInformationGenerator
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueINF
Fixed ValueINF
52. Observation.informant.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
53. Observation.informant.assignedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
54. Observation.informant.relatedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
55. Observation.participant
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Participant2
56. Observation.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
SlicingThis element introduces a set of slices on Observation.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • profile @ act
  • profile @ act,
57. Observation.entryRelationship.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
58. Observation.entryRelationship.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
59. Observation.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
60. Observation.entryRelationship.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
61. Observation.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
62. Observation.entryRelationship.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
63. Observation.entryRelationship.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
64. Observation.entryRelationship.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
65. Observation.entryRelationship.observation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
66. Observation.entryRelationship.regionOfInterest
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
67. Observation.entryRelationship.observationMedia
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
68. Observation.entryRelationship.substanceAdministration
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
69. Observation.entryRelationship.supply
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
70. Observation.entryRelationship.procedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
71. Observation.entryRelationship.encounter
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
72. Observation.entryRelationship.organizer
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
73. Observation.entryRelationship.act
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
74. Observation.entryRelationship:healthConcern
SliceNamehealthConcern
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-30701) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
75. Observation.entryRelationship:healthConcern.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
76. Observation.entryRelationship:healthConcern.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
77. Observation.entryRelationship:healthConcern.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30702).

Pattern ValueREFR
78. Observation.entryRelationship:healthConcern.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
79. Observation.entryRelationship:healthConcern.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
80. Observation.entryRelationship:healthConcern.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
81. Observation.entryRelationship:healthConcern.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
82. Observation.entryRelationship:healthConcern.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
83. Observation.entryRelationship:healthConcern.observation
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
84. Observation.entryRelationship:healthConcern.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
85. Observation.entryRelationship:healthConcern.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
86. Observation.entryRelationship:healthConcern.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
87. Observation.entryRelationship:healthConcern.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
88. Observation.entryRelationship:healthConcern.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
89. Observation.entryRelationship:healthConcern.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
90. Observation.entryRelationship:healthConcern.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
91. Observation.entryRelationship:healthConcern.act
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-30703).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
92. Observation.entryRelationship:plannedComponent
SliceNameplannedComponent
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-30704) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
93. Observation.entryRelationship:plannedComponent.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
94. Observation.entryRelationship:plannedComponent.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
95. Observation.entryRelationship:plannedComponent.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30705).

Pattern ValueCOMP
96. Observation.entryRelationship:plannedComponent.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
97. Observation.entryRelationship:plannedComponent.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
98. Observation.entryRelationship:plannedComponent.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
99. Observation.entryRelationship:plannedComponent.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
100. Observation.entryRelationship:plannedComponent.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
101. Observation.entryRelationship:plannedComponent.observation
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
102. Observation.entryRelationship:plannedComponent.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
103. Observation.entryRelationship:plannedComponent.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
104. Observation.entryRelationship:plannedComponent.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
105. Observation.entryRelationship:plannedComponent.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
106. Observation.entryRelationship:plannedComponent.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
107. Observation.entryRelationship:plannedComponent.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
108. Observation.entryRelationship:plannedComponent.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
109. Observation.entryRelationship:plannedComponent.act
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-32879).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
110. Observation.entryRelationship:priority
SliceNamepriority
Control0..1
TypeElement
Requirements

SHOULD contain zero or one [0..1] entryRelationship (CONF:1098-30785) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
111. Observation.entryRelationship:priority.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
112. Observation.entryRelationship:priority.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
113. Observation.entryRelationship:priority.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-30786).

Pattern ValueREFR
114. Observation.entryRelationship:priority.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
115. Observation.entryRelationship:priority.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
116. Observation.entryRelationship:priority.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
117. Observation.entryRelationship:priority.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
118. Observation.entryRelationship:priority.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
119. Observation.entryRelationship:priority.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements

SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1098-30787).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
120. Observation.entryRelationship:priority.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
121. Observation.entryRelationship:priority.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
122. Observation.entryRelationship:priority.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
123. Observation.entryRelationship:priority.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
124. Observation.entryRelationship:priority.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
125. Observation.entryRelationship:priority.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
126. Observation.entryRelationship:priority.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
127. Observation.entryRelationship:priority.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
128. Observation.entryRelationship:goal
SliceNamegoal
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31448) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
129. Observation.entryRelationship:goal.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
130. Observation.entryRelationship:goal.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
131. Observation.entryRelationship:goal.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31449).

Pattern ValueCOMP
132. Observation.entryRelationship:goal.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
133. Observation.entryRelationship:goal.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
134. Observation.entryRelationship:goal.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
135. Observation.entryRelationship:goal.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
136. Observation.entryRelationship:goal.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
137. Observation.entryRelationship:goal.observation
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation(GoalObservation)
Requirements

SHALL contain exactly one [1..1] Goal Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.121) (CONF:1098-32880).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
138. Observation.entryRelationship:goal.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
139. Observation.entryRelationship:goal.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
140. Observation.entryRelationship:goal.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
141. Observation.entryRelationship:goal.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
142. Observation.entryRelationship:goal.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
143. Observation.entryRelationship:goal.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
144. Observation.entryRelationship:goal.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
145. Observation.entryRelationship:goal.act
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
146. Observation.entryRelationship:entryReference
SliceNameentryReference
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] entryRelationship (CONF:1098-31559) such that it

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
147. Observation.entryRelationship:entryReference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
148. Observation.entryRelationship:entryReference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
149. Observation.entryRelationship:entryReference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-31560).

Pattern ValueREFR
150. Observation.entryRelationship:entryReference.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
151. Observation.entryRelationship:entryReference.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
152. Observation.entryRelationship:entryReference.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
153. Observation.entryRelationship:entryReference.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
154. Observation.entryRelationship:entryReference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
155. Observation.entryRelationship:entryReference.observation
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
156. Observation.entryRelationship:entryReference.regionOfInterest
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
157. Observation.entryRelationship:entryReference.observationMedia
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
158. Observation.entryRelationship:entryReference.substanceAdministration
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
159. Observation.entryRelationship:entryReference.supply
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
160. Observation.entryRelationship:entryReference.procedure
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
161. Observation.entryRelationship:entryReference.encounter
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
162. Observation.entryRelationship:entryReference.organizer
Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
163. Observation.entryRelationship:entryReference.act
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act(EntryReference)
Requirements

SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:1098-31588).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
164. Observation.reference
Control0..*
TypeElement
Requirements

MAY contain zero or more [0..*] reference (CONF:1098-32754).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
165. Observation.reference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
166. Observation.reference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
167. Observation.reference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Requirements

The reference, if present, SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1098-32755).

Pattern ValueREFR
168. Observation.reference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
169. Observation.reference.externalAct
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalAct
170. Observation.reference.externalObservation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
171. Observation.reference.externalProcedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
172. Observation.reference.externalDocument
Definition

Base definition for all types defined in FHIR type system.

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument(ExternalDocumentReference)
Requirements

The reference, if present, SHALL contain exactly one [1..1] External Document Reference (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.115:2014-06-09) (CONF:1098-32756).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
173. Observation.precondition
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Precondition
174. Observation.referenceRange
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
175. Observation.referenceRange.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
176. Observation.referenceRange.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.referenceRange.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
177. Observation.referenceRange.typeCode
Control1..1
BindingThe codes SHALL be taken from ActRelationshipPertains
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueREFV
Fixed ValueREFV
178. Observation.referenceRange.observationRange
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationRange