HL7.CDA.US.CCDA\Longitudinal Care Wound Observation - Definitions

This page is part of the CCDA: Consolidated CDA Release (v2.1.0-draft1: CCDA 2.1 Draft) based on FHIR v5.0.0. . For a full list of available versions, see the Directory of published versions

Resource Profile: LongitudinalCareWoundObservation - Detailed Descriptions

Active as of 2023-01-16

Definitions for the 2.16.840.1.113883.10.20.22.4.114 resource profile.

Differential Elements Table
Key Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here.

1. Observation
2. Observation.classCode
Requirements	SHALL contain exactly one [1..1] @classCode="OBS" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1198-31012). SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:1198-9041).
3. Observation.moodCode
Requirements	SHALL contain exactly one [1..1] @moodCode="EVN" (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1198-31013). SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:1198-9042).
4. Observation.templateId
Slicing	This element introduces a set of slices on Observation.templateId. The slices are and , and can be differentiated using the following discriminators: @ @ ,
5. Observation.templateId:secondary
SliceName	secondary
Control	1..1
Requirements	SHALL contain exactly one [1..1] templateId (CONF:1198-32947) such that it
6. Observation.templateId:secondary.root
Control	1..1
Requirements	SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.114" (CONF:1198-29474).
Pattern Value	2.16.840.1.113883.10.20.22.4.114
7. Observation.templateId:secondary.extension
Control	1..1
Requirements	SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32913).
Pattern Value	2015-08-01
8. Observation.code
Requirements	SHALL contain exactly one [1..1] code (CONF:1198-29476). SHALL contain exactly one [1..1] code, which SHOULD be selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 DYNAMIC (CONF:1198-9045).
9. Observation.code.code
Control	1..1
Requirements	This code SHALL contain exactly one [1..1] @code="ASSERTION" assertion (CONF:1198-29477).
Pattern Value	ASSERTION
10. Observation.code.codeSystem
Control	1..1
Requirements	This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4" (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:1198-31010).
Pattern Value	2.16.840.1.113883.5.4
11. Observation.value
Binding	The codes SHOULD be taken from Wound TypeThe codes SHOULD be taken from Problem
Requirements	SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Wound Type urn:oid:2.16.840.1.113883.1.11.20.2.6 DYNAMIC (CONF:1198-29485). SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Problem urn:oid:2.16.840.1.113883.3.88.12.3221.7.4 DYNAMIC (CONF:1198-9058).
12. Observation.targetSiteCode
Slicing	This element introduces a set of slices on Observation.targetSiteCode. The slices are unordered and Open, and defines no discriminators to differentiate the slices
13. Observation.targetSiteCode:targetSiteCode1
SliceName	targetSiteCode1
Control	0..1
Binding	The codes SHOULD be taken from Body Site Value Set
Requirements	SHOULD contain zero or one [0..1] targetSiteCode, which SHOULD be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1198-29488) such that it
14. Observation.targetSiteCode:targetSiteCode1.qualifier
Control	0..*
Requirements	MAY contain zero or more [0..*] qualifier (CONF:1198-29490).
15. Observation.targetSiteCode:targetSiteCode1.qualifier.name
Control	1..1
Requirements	The qualifier, if present, SHALL contain exactly one [1..1] name (CONF:1198-29491).
16. Observation.targetSiteCode:targetSiteCode1.qualifier.name.code
Control	1..1
Requirements	This name SHALL contain exactly one [1..1] @code="272741003" laterality (CONF:1198-29492).
Pattern Value	272741003
17. Observation.targetSiteCode:targetSiteCode1.qualifier.name.codeSystem
Control	1..1
Requirements	This name SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.6.96" (CodeSystem: SNOMED CT urn:oid:2.16.840.1.113883.6.96) (CONF:1198-31524).
Pattern Value	2.16.840.1.113883.6.96
18. Observation.targetSiteCode:targetSiteCode1.qualifier.value
Control	1..1
Requirements	The qualifier, if present, SHALL contain exactly one [1..1] value (CONF:1198-29493).
19. Observation.targetSiteCode:targetSiteCode1.qualifier.value.code
Control	1..1
Binding	The codes SHOULD be taken from TargetSite Qualifiers
Requirements	This value SHALL contain exactly one [1..1] @code, which SHOULD be selected from ValueSet TargetSite Qualifiers urn:oid:2.16.840.1.113883.11.20.9.37 DYNAMIC (CONF:1198-29494).
20. Observation.author
Type	http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements	SHOULD contain zero or more [0..] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31542). SHOULD contain zero or more [0..] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31147).
21. Observation.entryRelationship
Slicing	This element introduces a set of slices on Observation.entryRelationship. The slices are and , and can be differentiated using the following discriminators: @
22. Observation.entryRelationship:woundMeasurementObservation
SliceName	woundMeasurementObservation
Control	0..*
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-29495) such that it
23. Observation.entryRelationship:woundMeasurementObservation.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="COMP" (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-29496).
Pattern Value	COMP
24. Observation.entryRelationship:woundMeasurementObservation.observation
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(WoundMeasurementObservation)
Requirements	SHALL contain exactly one [1..1] Wound Measurement Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.133) (CONF:1198-29497).
25. Observation.entryRelationship:woundCharacteristic
SliceName	woundCharacteristic
Control	0..*
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-29503) such that it
26. Observation.entryRelationship:woundCharacteristic.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="COMP" (CONF:1198-29504).
Pattern Value	COMP
27. Observation.entryRelationship:woundCharacteristic.observation
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(WoundCharacteristic)
Requirements	SHALL contain exactly one [1..1] Wound Characteristic (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.134) (CONF:1198-29505).
28. Observation.entryRelationship:numberofPressureUlcersObservation
SliceName	numberofPressureUlcersObservation
Control	0..*
Requirements	MAY contain zero or more [0..*] entryRelationship (CONF:1198-31890) such that it
29. Observation.entryRelationship:numberofPressureUlcersObservation.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31891).
Pattern Value	COMP
30. Observation.entryRelationship:numberofPressureUlcersObservation.observation
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(NumberofPressureUlcersObservation)
Requirements	SHALL contain exactly one [1..1] Number of Pressure Ulcers Observation (V3) (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.76:2015-08-01) (CONF:1198-31892).
31. Observation.entryRelationship:highestPressureUlcerStage
SliceName	highestPressureUlcerStage
Control	0..1
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-31893) such that it
32. Observation.entryRelationship:highestPressureUlcerStage.typeCode
Control	1..1
Requirements	SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31894).
Pattern Value	COMP
33. Observation.entryRelationship:highestPressureUlcerStage.observation
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(HighestPressureUlcerStage)
Requirements	SHALL contain exactly one [1..1] Highest Pressure Ulcer Stage (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.77) (CONF:1198-31919).

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Definition	Base definition for all types defined in FHIR type system.
Control	10..1*
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
2. Observation.classCode
Control	1..1
Binding	The codes SHALL be taken from ActClassObservation
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @classCode="OBS" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1198-31012).
Pattern Value	OBS
3. Observation.moodCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @moodCode="EVN" (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1198-31013).
Pattern Value	EVN
4. Observation.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Slicing	This element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ root value @ root,
5. Observation.templateId:primary
SliceName	primary
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain exactly one [1..1] templateId (CONF:1198-14926) such that it
6. Observation.templateId:primary.root
Definition	A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.4" (CONF:1198-14927).
Pattern Value	2.16.840.1.113883.10.20.22.4.4
7. Observation.templateId:primary.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32508).
Pattern Value	2015-08-01
8. Observation.templateId:secondary
SliceName	secondary
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain exactly one [1..1] templateId (CONF:1198-32947) such that it
9. Observation.templateId:secondary.root
Definition	A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.114" (CONF:1198-29474).
Pattern Value	2.16.840.1.113883.10.20.22.4.114
10. Observation.templateId:secondary.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32913).
Pattern Value	2015-08-01
11. Observation.id
Definition	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Control	10..*1
Type	http://hl7.org/fhir/cda/StructureDefinition/IIid
Requirements	SHALL contain at least one [1..*] id (CONF:1198-9043).
Comments	Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.
12. Observation.code
Definition	Describes what was observed. Sometimes this is called the observation "name".
Control	1..1
Binding	The codes SHOULD be taken from Problem Type (SNOMEDCT)For example codes, see LOINCCodes
Type	http://hl7.org/fhir/cda/StructureDefinition/CDCodeableConcept
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	SHALL contain exactly one [1..1] code (CONF:1198-29476). Knowing what kind of observation is being made is essential to understanding the observation.
Alternate Names	Name
Comments	All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.
Invariants	Defined on this element 1198-32950: If code is selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 DYNAMIC, then it SHALL have at least one [1..] translation, which SHOULD* be selected from ValueSet Problem Type (LOINC) urn:oid:2.16.840.1.113762.1.4.1099.28 DYNAMIC (CONF:1198-32950) (CONF:1198-32950). (: null)
13. Observation.code.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This code SHALL contain exactly one [1..1] @code="ASSERTION" assertion (CONF:1198-29477).
Pattern Value	ASSERTION
14. Observation.code.codeSystem
Definition	Specifies the code system that defines the code.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4" (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:1198-31010).
Pattern Value	2.16.840.1.113883.5.4
15. Observation.statusCode
Control	1..1
Binding	The codes SHALL be taken from ActStatus
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
Requirements	SHALL contain exactly one [1..1] statusCode (CONF:1198-9049).
16. Observation.statusCode.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:1198-19112).
Pattern Value	completed
17. Observation.statusCode.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
18. Observation.statusCode.codeSystemName
Definition	The common name of the coding system.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
19. Observation.statusCode.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
20. Observation.statusCode.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
21. Observation.statusCode.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
22. Observation.statusCode.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
23. Observation.statusCode.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
24. Observation.effectiveTime
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-TS
Requirements	SHALL contain exactly one [1..1] effectiveTime (CONF:1198-9050).
25. Observation.effectiveTime.low
Definition	This is the low limit of the interval.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/TS
Requirements	This effectiveTime SHALL contain exactly one [1..1] low (CONF:1198-15603).
26. Observation.value
Control	1..1
Binding	The codes SHOULD be taken from Wound Type
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Wound Type urn:oid:2.16.840.1.113883.1.11.20.2.6 DYNAMIC (CONF:1198-29485).
27. Observation.value.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Slicing	This element introduces a set of slices on Observation.value.translation. The slices are unordered and Open, and defines no discriminators to differentiate the slices
28. Observation.value.translation:alt
SliceName	alt
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	This value MAY contain zero or more [0..*] translation (CONF:1198-16749) such that it
29. Observation.targetSiteCode
Definition	Drawn from concept domain ActSite
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Slicing	This element introduces a set of slices on Observation.targetSiteCode. The slices are unordered and Open, and defines no discriminators to differentiate the slices
30. Observation.targetSiteCode:targetSiteCode1
SliceName	targetSiteCode1
Definition	Drawn from concept domain ActSite
Control	0..1
Binding	The codes SHOULD be taken from Body Site Value Set
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Requirements	SHOULD contain zero or one [0..1] targetSiteCode, which SHOULD be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1198-29488) such that it
31. Observation.targetSiteCode:targetSiteCode1.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
Requirements	MAY contain zero or more [0..*] qualifier (CONF:1198-29490).
32. Observation.targetSiteCode:targetSiteCode1.qualifier.name
Definition	Specifies the manner in which the concept role value contributes to the meaning of a code phrase. For example, if SNOMED RT defines a concept "leg", a role relation "has-laterality", and another concept "left", the concept role relation allows to add the qualifier "has-laterality: left" to a primary code "leg" to construct the meaning "left leg". In this example "has-laterality" is the CR.name.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/CV
Requirements	The qualifier, if present, SHALL contain exactly one [1..1] name (CONF:1198-29491).
33. Observation.targetSiteCode:targetSiteCode1.qualifier.name.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This name SHALL contain exactly one [1..1] @code="272741003" laterality (CONF:1198-29492).
Pattern Value	272741003
34. Observation.targetSiteCode:targetSiteCode1.qualifier.name.codeSystem
Definition	Specifies the code system that defines the code.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This name SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.6.96" (CodeSystem: SNOMED CT urn:oid:2.16.840.1.113883.6.96) (CONF:1198-31524).
Pattern Value	2.16.840.1.113883.6.96
35. Observation.targetSiteCode:targetSiteCode1.qualifier.name.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
36. Observation.targetSiteCode:targetSiteCode1.qualifier.name.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
37. Observation.targetSiteCode:targetSiteCode1.qualifier.value
Definition	The concept that modifies the primary code of a code phrase through the role relation. For example, if SNOMED RT defines a concept "leg", a role relation "has-laterality", and another concept "left", the concept role relation allows adding the qualifier "has-laterality: left" to a primary code "leg" to construct the meaning "left leg". In this example "left" is the CR.value.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Requirements	The qualifier, if present, SHALL contain exactly one [1..1] value (CONF:1198-29493).
38. Observation.targetSiteCode:targetSiteCode1.qualifier.value.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Binding	The codes SHOULD be taken from TargetSite Qualifiers
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This value SHALL contain exactly one [1..1] @code, which SHOULD be selected from ValueSet TargetSite Qualifiers urn:oid:2.16.840.1.113883.11.20.9.37 DYNAMIC (CONF:1198-29494).
39. Observation.author
Definition	Base definition for all types defined in FHIR type system.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements	SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31542).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. Observation.entryRelationship
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
Slicing	This element introduces a set of slices on Observation.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators: profile @ observation
41. Observation.entryRelationship:age
SliceName	age
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-9059) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
42. Observation.entryRelationship:age.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="SUBJ" Has subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-9060).
Pattern Value	SUBJ
43. Observation.entryRelationship:age.inversionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:1198-9069).
Pattern Value	true
44. Observation.entryRelationship:age.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
45. Observation.entryRelationship:age.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(AgeObservation)
Requirements	SHALL contain exactly one [1..1] Age Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.31) (CONF:1198-15590).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. Observation.entryRelationship:age.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
47. Observation.entryRelationship:age.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
48. Observation.entryRelationship:age.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
49. Observation.entryRelationship:age.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
50. Observation.entryRelationship:age.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
51. Observation.entryRelationship:age.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
52. Observation.entryRelationship:age.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
53. Observation.entryRelationship:age.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
54. Observation.entryRelationship:prognosis
SliceName	prognosis
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-29951) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
55. Observation.entryRelationship:prognosis.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31531).
Pattern Value	REFR
56. Observation.entryRelationship:prognosis.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
57. Observation.entryRelationship:prognosis.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(PrognosisObservation)
Requirements	SHALL contain exactly one [1..1] Prognosis Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.113) (CONF:1198-29952).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
58. Observation.entryRelationship:prognosis.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
59. Observation.entryRelationship:prognosis.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
60. Observation.entryRelationship:prognosis.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
61. Observation.entryRelationship:prognosis.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
62. Observation.entryRelationship:prognosis.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
63. Observation.entryRelationship:prognosis.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
64. Observation.entryRelationship:prognosis.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
65. Observation.entryRelationship:prognosis.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
66. Observation.entryRelationship:priority
SliceName	priority
Control	0..*
Type	Element
Requirements	MAY contain zero or more [0..*] entryRelationship (CONF:1198-31063) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
67. Observation.entryRelationship:priority.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31532).
Pattern Value	REFR
68. Observation.entryRelationship:priority.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
69. Observation.entryRelationship:priority.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements	SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1198-31064).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
70. Observation.entryRelationship:priority.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
71. Observation.entryRelationship:priority.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
72. Observation.entryRelationship:priority.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
73. Observation.entryRelationship:priority.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
74. Observation.entryRelationship:priority.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
75. Observation.entryRelationship:priority.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
76. Observation.entryRelationship:priority.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
77. Observation.entryRelationship:priority.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
78. Observation.entryRelationship:status
SliceName	status
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-9063) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
79. Observation.entryRelationship:status.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-9068).
Pattern Value	REFR
80. Observation.entryRelationship:status.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
81. Observation.entryRelationship:status.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(ProblemStatus)
Requirements	SHALL contain exactly one [1..1] Problem Status (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.6:2019-06-20) (CONF:1198-15591).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
82. Observation.entryRelationship:status.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
83. Observation.entryRelationship:status.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
84. Observation.entryRelationship:status.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
85. Observation.entryRelationship:status.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
86. Observation.entryRelationship:status.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
87. Observation.entryRelationship:status.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
88. Observation.entryRelationship:status.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
89. Observation.entryRelationship:status.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
90. Observation.entryRelationship:woundMeasurementObservation
SliceName	woundMeasurementObservation
Control	0..*
Type	Element
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-29495) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
91. Observation.entryRelationship:woundCharacteristic
SliceName	woundCharacteristic
Control	0..*
Type	Element
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-29503) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
92. Observation.entryRelationship:numberofPressureUlcersObservation
SliceName	numberofPressureUlcersObservation
Control	0..*
Type	Element
Requirements	MAY contain zero or more [0..*] entryRelationship (CONF:1198-31890) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
93. Observation.entryRelationship:highestPressureUlcerStage
SliceName	highestPressureUlcerStage
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-31893) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
2. Observation.classCode
Control	1..1
Binding	The codes SHALL be taken from ActClassObservation
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @classCode="OBS" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:1198-31012).
Pattern Value	OBS
3. Observation.moodCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @moodCode="EVN" (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:1198-31013).
Pattern Value	EVN
4. Observation.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	MAY contain zero or one [0..1] @negationInd (CONF:1198-10139).
5. Observation.realmCode
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
6. Observation.typeId
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
7. Observation.templateId
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Slicing	This element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ root value @ root,
8. Observation.templateId:primary
SliceName	primary
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain exactly one [1..1] templateId (CONF:1198-14926) such that it
9. Observation.templateId:primary.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
10. Observation.templateId:primary.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
11. Observation.templateId:primary.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
12. Observation.templateId:primary.root
Definition	A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.4" (CONF:1198-14927).
Pattern Value	2.16.840.1.113883.10.20.22.4.4
13. Observation.templateId:primary.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32508).
Pattern Value	2015-08-01
14. Observation.templateId:secondary
SliceName	secondary
Definition	When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain exactly one [1..1] templateId (CONF:1198-32947) such that it
15. Observation.templateId:secondary.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
16. Observation.templateId:secondary.assigningAuthorityName
Definition	A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
17. Observation.templateId:secondary.displayable
Definition	Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
18. Observation.templateId:secondary.root
Definition	A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.22.4.114" (CONF:1198-29474).
Pattern Value	2.16.840.1.113883.10.20.22.4.114
19. Observation.templateId:secondary.extension
Definition	A character string as a unique identifier within the scope of the identifier root.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @extension="2015-08-01" (CONF:1198-32913).
Pattern Value	2015-08-01
20. Observation.id
Control	1..*
Type	http://hl7.org/fhir/cda/StructureDefinition/II
Requirements	SHALL contain at least one [1..*] id (CONF:1198-9043).
21. Observation.code
Control	1..1
Binding	The codes SHOULD be taken from Problem Type (SNOMEDCT)
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	SHALL contain exactly one [1..1] code (CONF:1198-29476).
Invariants	Defined on this element 1198-32950: If code is selected from ValueSet Problem Type (SNOMEDCT) urn:oid:2.16.840.1.113883.3.88.12.3221.7.2 DYNAMIC, then it SHALL have at least one [1..] translation, which SHOULD* be selected from ValueSet Problem Type (LOINC) urn:oid:2.16.840.1.113762.1.4.1099.28 DYNAMIC (CONF:1198-32950) (CONF:1198-32950). (: )
22. Observation.code.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
23. Observation.code.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This code SHALL contain exactly one [1..1] @code="ASSERTION" assertion (CONF:1198-29477).
Pattern Value	ASSERTION
24. Observation.code.codeSystem
Definition	Specifies the code system that defines the code.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.5.4" (CodeSystem: HL7ActCode urn:oid:2.16.840.1.113883.5.4) (CONF:1198-31010).
Pattern Value	2.16.840.1.113883.5.4
25. Observation.code.codeSystemName
Definition	The common name of the coding system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
26. Observation.code.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
27. Observation.code.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
28. Observation.code.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
29. Observation.code.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
30. Observation.code.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
31. Observation.code.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
32. Observation.code.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
33. Observation.derivationExpr
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ST
34. Observation.text
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
XML Representation	The type of this property is determined using the xsi:type attribute.
35. Observation.statusCode
Control	1..1
Binding	The codes SHALL be taken from ActStatus
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
Requirements	SHALL contain exactly one [1..1] statusCode (CONF:1198-9049).
36. Observation.statusCode.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
37. Observation.statusCode.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:1198-19112).
Pattern Value	completed
38. Observation.statusCode.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
39. Observation.statusCode.codeSystemName
Definition	The common name of the coding system.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
40. Observation.statusCode.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
41. Observation.statusCode.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..0
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
42. Observation.statusCode.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
43. Observation.statusCode.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
44. Observation.statusCode.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
45. Observation.statusCode.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
46. Observation.statusCode.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
47. Observation.effectiveTime
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-TS
Requirements	SHALL contain exactly one [1..1] effectiveTime (CONF:1198-9050).
48. Observation.effectiveTime.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
49. Observation.effectiveTime.value
Definition	A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression.
Control	0..1
Type	dateTime
XML Representation	In the XML format, this property is represented as an attribute.
50. Observation.effectiveTime.inclusive
Definition	Specifies whether the limit is included in the interval (interval is closed) or excluded from the interval (interval is open).
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
51. Observation.effectiveTime.operator
Definition	A code specifying whether the set component is included (union) or excluded (set-difference) from the set, or other set operations with the current set component and the set as constructed from the representation stream up to the current point.
Control	0..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
52. Observation.effectiveTime.low
Definition	This is the low limit of the interval.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/TS
Requirements	This effectiveTime SHALL contain exactly one [1..1] low (CONF:1198-15603).
53. Observation.effectiveTime.high
Definition	This is the high limit of the interval.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/TS
Requirements	This effectiveTime MAY contain zero or one [0..1] high (CONF:1198-15604).
54. Observation.effectiveTime.width
Definition	The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/PQ
55. Observation.effectiveTime.center
Definition	The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/TS
56. Observation.priorityCode
Control	0..1
Binding	The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
57. Observation.repeatNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/IVL-INT
58. Observation.languageCode
Control	0..1
Binding	The codes SHALL be taken from HumanLanguage
Type	http://hl7.org/fhir/cda/StructureDefinition/CS
59. Observation.value
Control	1..1
Binding	The codes SHOULD be taken from Wound Type
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	SHALL contain exactly one [1..1] value with @xsi:type="CD", where the code SHOULD be selected from ValueSet Wound Type urn:oid:2.16.840.1.113883.1.11.20.2.6 DYNAMIC (CONF:1198-29485).
60. Observation.value.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
61. Observation.value.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This value MAY contain zero or one [0..1] @code (CONF:1198-31871).
62. Observation.value.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
63. Observation.value.codeSystemName
Definition	The common name of the coding system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
64. Observation.value.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
65. Observation.value.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
66. Observation.value.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
67. Observation.value.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
68. Observation.value.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
69. Observation.value.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
Requirements	This value MAY contain zero or more [0..*] qualifier (CONF:1198-31870).
70. Observation.value.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Slicing	This element introduces a set of slices on Observation.value.translation. The slices are unordered and Open, and defines no discriminators to differentiate the slices
71. Observation.value.translation:alt
SliceName	alt
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
Requirements	This value MAY contain zero or more [0..*] translation (CONF:1198-16749) such that it
72. Observation.value.translation:alt.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
73. Observation.value.translation:alt.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	MAY contain zero or one [0..1] @code (CodeSystem: ICD-10-CM urn:oid:2.16.840.1.113883.6.90 STATIC) (CONF:1198-16750).
74. Observation.value.translation:alt.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
75. Observation.value.translation:alt.codeSystemName
Definition	The common name of the coding system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
76. Observation.value.translation:alt.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
77. Observation.value.translation:alt.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
78. Observation.value.translation:alt.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
79. Observation.value.translation:alt.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
80. Observation.value.translation:alt.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
81. Observation.value.translation:alt.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
82. Observation.value.translation:alt.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
83. Observation.interpretationCode
Control	0..*
Binding	The codes SHALL be taken from ObservationInterpretation
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
84. Observation.methodCode
Control	0..*
Binding	The codes SHALL be taken from ObservationMethod; other codes may be used where these codes are not suitable
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
85. Observation.targetSiteCode
Definition	Drawn from concept domain ActSite
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Slicing	This element introduces a set of slices on Observation.targetSiteCode. The slices are unordered and Open, and defines no discriminators to differentiate the slices
86. Observation.targetSiteCode:targetSiteCode1
SliceName	targetSiteCode1
Definition	Drawn from concept domain ActSite
Control	0..1
Binding	The codes SHOULD be taken from Body Site Value Set
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Requirements	SHOULD contain zero or one [0..1] targetSiteCode, which SHOULD be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:1198-29488) such that it
87. Observation.targetSiteCode:targetSiteCode1.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
88. Observation.targetSiteCode:targetSiteCode1.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
89. Observation.targetSiteCode:targetSiteCode1.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
90. Observation.targetSiteCode:targetSiteCode1.codeSystemName
Definition	The common name of the coding system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
91. Observation.targetSiteCode:targetSiteCode1.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
92. Observation.targetSiteCode:targetSiteCode1.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
93. Observation.targetSiteCode:targetSiteCode1.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
94. Observation.targetSiteCode:targetSiteCode1.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
95. Observation.targetSiteCode:targetSiteCode1.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
96. Observation.targetSiteCode:targetSiteCode1.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
Requirements	MAY contain zero or more [0..*] qualifier (CONF:1198-29490).
97. Observation.targetSiteCode:targetSiteCode1.qualifier.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
98. Observation.targetSiteCode:targetSiteCode1.qualifier.inverted
Definition	Indicates if the sense of the role name is inverted. This can be used in cases where the underlying code system defines inversion but does not provide reciprocal pairs of role names. By default, inverted is false.
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
99. Observation.targetSiteCode:targetSiteCode1.qualifier.name
Definition	Specifies the manner in which the concept role value contributes to the meaning of a code phrase. For example, if SNOMED RT defines a concept "leg", a role relation "has-laterality", and another concept "left", the concept role relation allows to add the qualifier "has-laterality: left" to a primary code "leg" to construct the meaning "left leg". In this example "has-laterality" is the CR.name.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/CV
Requirements	The qualifier, if present, SHALL contain exactly one [1..1] name (CONF:1198-29491).
100. Observation.targetSiteCode:targetSiteCode1.qualifier.name.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
101. Observation.targetSiteCode:targetSiteCode1.qualifier.name.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This name SHALL contain exactly one [1..1] @code="272741003" laterality (CONF:1198-29492).
Pattern Value	272741003
102. Observation.targetSiteCode:targetSiteCode1.qualifier.name.codeSystem
Definition	Specifies the code system that defines the code.
Control	1..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This name SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.6.96" (CodeSystem: SNOMED CT urn:oid:2.16.840.1.113883.6.96) (CONF:1198-31524).
Pattern Value	2.16.840.1.113883.6.96
103. Observation.targetSiteCode:targetSiteCode1.qualifier.name.codeSystemName
Definition	The common name of the coding system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
104. Observation.targetSiteCode:targetSiteCode1.qualifier.name.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
105. Observation.targetSiteCode:targetSiteCode1.qualifier.name.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
106. Observation.targetSiteCode:targetSiteCode1.qualifier.name.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
107. Observation.targetSiteCode:targetSiteCode1.qualifier.name.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
108. Observation.targetSiteCode:targetSiteCode1.qualifier.name.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
109. Observation.targetSiteCode:targetSiteCode1.qualifier.name.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
110. Observation.targetSiteCode:targetSiteCode1.qualifier.name.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
111. Observation.targetSiteCode:targetSiteCode1.qualifier.value
Definition	The concept that modifies the primary code of a code phrase through the role relation. For example, if SNOMED RT defines a concept "leg", a role relation "has-laterality", and another concept "left", the concept role relation allows adding the qualifier "has-laterality: left" to a primary code "leg" to construct the meaning "left leg". In this example "left" is the CR.value.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
Requirements	The qualifier, if present, SHALL contain exactly one [1..1] value (CONF:1198-29493).
112. Observation.targetSiteCode:targetSiteCode1.qualifier.value.nullFlavor
Definition	If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.
Control	0..1
Binding	The codes SHALL be taken from NullFlavor
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
113. Observation.targetSiteCode:targetSiteCode1.qualifier.value.code
Definition	The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.
Control	1..1
Binding	The codes SHOULD be taken from TargetSite Qualifiers
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	This value SHALL contain exactly one [1..1] @code, which SHOULD be selected from ValueSet TargetSite Qualifiers urn:oid:2.16.840.1.113883.11.20.9.37 DYNAMIC (CONF:1198-29494).
114. Observation.targetSiteCode:targetSiteCode1.qualifier.value.codeSystem
Definition	Specifies the code system that defines the code.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
115. Observation.targetSiteCode:targetSiteCode1.qualifier.value.codeSystemName
Definition	The common name of the coding system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
116. Observation.targetSiteCode:targetSiteCode1.qualifier.value.codeSystemVersion
Definition	If applicable, a version descriptor defined specifically for the given code system.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
117. Observation.targetSiteCode:targetSiteCode1.qualifier.value.displayName
Definition	A name or title for the code, under which the sending system shows the code value to its users.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
118. Observation.targetSiteCode:targetSiteCode1.qualifier.value.sdtcValueSet
Definition	The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSet`.
119. Observation.targetSiteCode:targetSiteCode1.qualifier.value.sdtcValueSetVersion
Definition	The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace `urn:hl7-org:sdtc`.In the XML format, this property has the actual name `valueSetVersion`.
120. Observation.targetSiteCode:targetSiteCode1.qualifier.value.originalText
Definition	The text or phrase used as the basis for the coding.
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ED
121. Observation.targetSiteCode:targetSiteCode1.qualifier.value.qualifier
Definition	Specifies additional codes that increase the specificity of the the primary code.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CR
122. Observation.targetSiteCode:targetSiteCode1.qualifier.value.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
123. Observation.targetSiteCode:targetSiteCode1.translation
Definition	A set of other concept descriptors that translate this concept descriptor into other code systems.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/CD
XML Representation	The type of this property is determined using the xsi:type attribute.
124. Observation.subject
Control	0..1
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
125. Observation.subject.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
126. Observation.subject.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
127. Observation.subject.typeCode
Control	1..1
Binding	The codes SHALL be taken from ParticipationTargetSubject
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	SBJ
Fixed Value	SBJ
128. Observation.subject.contextControlCode
Control	1..1
Binding	The codes SHALL be taken from ContextControl
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	OP
Fixed Value	OP
129. Observation.subject.awarenessCode
Control	0..1
Binding	The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Type	http://hl7.org/fhir/cda/StructureDefinition/CE
130. Observation.subject.relatedSubject
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
131. Observation.specimen
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Specimen
132. Observation.performer
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Performer2
133. Observation.author
Definition	Base definition for all types defined in FHIR type system.
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Author(AuthorParticipation)
Requirements	SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:1198-31542).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
134. Observation.informant
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
135. Observation.informant.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
136. Observation.informant.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
137. Observation.informant.typeCode
Control	1..1
Binding	The codes SHALL be taken from ParticipationInformationGenerator
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	INF
Fixed Value	INF
138. Observation.informant.contextControlCode
Control	1..1
Binding	The codes SHALL be taken from ContextControl
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	OP
Fixed Value	OP
139. Observation.informant.assignedEntity
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
140. Observation.informant.relatedEntity
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
141. Observation.participant
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Participant2
142. Observation.entryRelationship
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
Slicing	This element introduces a set of slices on Observation.entryRelationship. The slices are unordered and Open, and can be differentiated using the following discriminators: profile @ observation
143. Observation.entryRelationship:age
SliceName	age
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-9059) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
144. Observation.entryRelationship:age.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
145. Observation.entryRelationship:age.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
146. Observation.entryRelationship:age.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="SUBJ" Has subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:1198-9060).
Pattern Value	SUBJ
147. Observation.entryRelationship:age.inversionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @inversionInd="true" True (CONF:1198-9069).
Pattern Value	true
148. Observation.entryRelationship:age.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
149. Observation.entryRelationship:age.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
150. Observation.entryRelationship:age.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
151. Observation.entryRelationship:age.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
152. Observation.entryRelationship:age.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(AgeObservation)
Requirements	SHALL contain exactly one [1..1] Age Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.31) (CONF:1198-15590).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
153. Observation.entryRelationship:age.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
154. Observation.entryRelationship:age.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
155. Observation.entryRelationship:age.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
156. Observation.entryRelationship:age.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
157. Observation.entryRelationship:age.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
158. Observation.entryRelationship:age.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
159. Observation.entryRelationship:age.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
160. Observation.entryRelationship:age.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
161. Observation.entryRelationship:prognosis
SliceName	prognosis
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-29951) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
162. Observation.entryRelationship:prognosis.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
163. Observation.entryRelationship:prognosis.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
164. Observation.entryRelationship:prognosis.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31531).
Pattern Value	REFR
165. Observation.entryRelationship:prognosis.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
166. Observation.entryRelationship:prognosis.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
167. Observation.entryRelationship:prognosis.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
168. Observation.entryRelationship:prognosis.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
169. Observation.entryRelationship:prognosis.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
170. Observation.entryRelationship:prognosis.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(PrognosisObservation)
Requirements	SHALL contain exactly one [1..1] Prognosis Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.113) (CONF:1198-29952).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
171. Observation.entryRelationship:prognosis.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
172. Observation.entryRelationship:prognosis.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
173. Observation.entryRelationship:prognosis.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
174. Observation.entryRelationship:prognosis.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
175. Observation.entryRelationship:prognosis.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
176. Observation.entryRelationship:prognosis.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
177. Observation.entryRelationship:prognosis.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
178. Observation.entryRelationship:prognosis.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
179. Observation.entryRelationship:priority
SliceName	priority
Control	0..*
Type	Element
Requirements	MAY contain zero or more [0..*] entryRelationship (CONF:1198-31063) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
180. Observation.entryRelationship:priority.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
181. Observation.entryRelationship:priority.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
182. Observation.entryRelationship:priority.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-31532).
Pattern Value	REFR
183. Observation.entryRelationship:priority.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
184. Observation.entryRelationship:priority.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
185. Observation.entryRelationship:priority.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
186. Observation.entryRelationship:priority.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
187. Observation.entryRelationship:priority.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
188. Observation.entryRelationship:priority.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(PriorityPreference)
Requirements	SHALL contain exactly one [1..1] Priority Preference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.143) (CONF:1198-31064).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
189. Observation.entryRelationship:priority.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
190. Observation.entryRelationship:priority.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
191. Observation.entryRelationship:priority.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
192. Observation.entryRelationship:priority.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
193. Observation.entryRelationship:priority.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
194. Observation.entryRelationship:priority.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
195. Observation.entryRelationship:priority.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
196. Observation.entryRelationship:priority.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
197. Observation.entryRelationship:status
SliceName	status
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-9063) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
198. Observation.entryRelationship:status.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
199. Observation.entryRelationship:status.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
200. Observation.entryRelationship:status.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Requirements	SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:1198-9068).
Pattern Value	REFR
201. Observation.entryRelationship:status.inversionInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
202. Observation.entryRelationship:status.contextConductionInd
Control	1..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	true
203. Observation.entryRelationship:status.sequenceNumber
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/INT
204. Observation.entryRelationship:status.negationInd
Control	0..1
Type	boolean
XML Representation	In the XML format, this property is represented as an attribute.
205. Observation.entryRelationship:status.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
206. Observation.entryRelationship:status.observation
Definition	Base definition for all types defined in FHIR type system.
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/Observation(ProblemStatus)
Requirements	SHALL contain exactly one [1..1] Problem Status (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.6:2019-06-20) (CONF:1198-15591).
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
207. Observation.entryRelationship:status.regionOfInterest
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
208. Observation.entryRelationship:status.observationMedia
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
209. Observation.entryRelationship:status.substanceAdministration
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
210. Observation.entryRelationship:status.supply
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Supply
211. Observation.entryRelationship:status.procedure
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Procedure
212. Observation.entryRelationship:status.encounter
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Encounter
213. Observation.entryRelationship:status.organizer
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Organizer
214. Observation.entryRelationship:status.act
Control	0..0
Type	http://hl7.org/fhir/cda/StructureDefinition/Act
215. Observation.entryRelationship:woundMeasurementObservation
SliceName	woundMeasurementObservation
Control	0..*
Type	Element
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-29495) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
216. Observation.entryRelationship:woundMeasurementObservation.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
217. Observation.entryRelationship:woundMeasurementObservation.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
218. Observation.entryRelationship:woundCharacteristic
SliceName	woundCharacteristic
Control	0..*
Type	Element
Requirements	SHOULD contain zero or more [0..*] entryRelationship (CONF:1198-29503) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
219. Observation.entryRelationship:woundCharacteristic.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
220. Observation.entryRelationship:woundCharacteristic.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
221. Observation.entryRelationship:numberofPressureUlcersObservation
SliceName	numberofPressureUlcersObservation
Control	0..*
Type	Element
Requirements	MAY contain zero or more [0..*] entryRelationship (CONF:1198-31890) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
222. Observation.entryRelationship:numberofPressureUlcersObservation.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
223. Observation.entryRelationship:numberofPressureUlcersObservation.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
224. Observation.entryRelationship:highestPressureUlcerStage
SliceName	highestPressureUlcerStage
Control	0..1
Type	Element
Requirements	MAY contain zero or one [0..1] entryRelationship (CONF:1198-31893) such that it
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation \| regionOfInterest \| observationMedia \| substanceAdministration \| supply \| procedure \| encounter \| organizer \| act).count() = 1)
225. Observation.entryRelationship:highestPressureUlcerStage.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
226. Observation.entryRelationship:highestPressureUlcerStage.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
227. Observation.reference
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
228. Observation.reference.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
229. Observation.reference.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
230. Observation.reference.typeCode
Control	1..1
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
231. Observation.reference.seperatableInd
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/BL
232. Observation.reference.externalAct
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ExternalAct
233. Observation.reference.externalObservation
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
234. Observation.reference.externalProcedure
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
235. Observation.reference.externalDocument
Control	0..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument
236. Observation.precondition
Control	0..*
Type	http://hl7.org/fhir/cda/StructureDefinition/Precondition
237. Observation.referenceRange
Control	0..*
Type	Element
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
238. Observation.referenceRange.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control	0..1
Type	string
XML Representation	In the XML format, this property is represented as an attribute.
Summary	false
239. Observation.referenceRange.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control	0..*
Type	Extension
Summary	false
Alternate Names	extensions, user content
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants	Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing	This element introduces a set of slices on Observation.referenceRange.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
240. Observation.referenceRange.typeCode
Control	1..1
Binding	The codes SHALL be taken from ActRelationshipPertains
Type	code
XML Representation	In the XML format, this property is represented as an attribute.
Default Value	REFV
Fixed Value	REFV
241. Observation.referenceRange.observationRange
Control	1..1
Type	http://hl7.org/fhir/cda/StructureDefinition/ObservationRange